Synthesis and characterization of guanidinate tin(ii) complexes for ring-opening polymerization of cyclic esters

Applications of low-valent compounds with heavy group-14 elements

Over the last two decades, the low-valent compounds of group-14 elements have received significant attention in several fields of chemistry owing to their unique electronic properties. The low-valent group-14 species include tetrylenes, tetryliumylidene, tetrylones, dimetallenes and dimetallynes. These low-valent group-14 species have shown applications in various areas such as organic transformations (hydroboration, cyanosilylation, N-functionalisation of amines, and hydroamination), small molecule activation (e.g. P4, As4, CO2, CO, H2, alkene, and alkyne) and materials. This review presents an in-depth discussion on low-valent group-14 species-catalyzed reactions, including polymerization of rac-lactide, L-lactide, DL-lactide, and caprolactone, followed by their photophysical properties (phosphorescence and fluorescence), thin film deposition (atomic layer deposition and vapor phase deposition), and medicinal applications. This review concisely summarizes current developments of low-valent heavier group-14 compounds, covering synthetic methodologies, structural aspects, and their applications in various fields of chemistry. Finally, their opportunities and challenges are examined and emphasized.

Synthesis and Some Coordination Chemistry of Phosphane-Difunctionalized Bis(amidinato)-Heavier Tetrylenes: A Previously Unknown Class of PEP Tetrylenes (E = Ge and Sn)

The bis(amidinato)-heavier tetrylenes E(bzamP)2 (E = Ge (2a) and Sn (2b); bzamP = N-isopropyl-N'-(diphenylphosphanylethyl)benzamidinate), which are equipped with one heavier tetrylene (germylene or stannylene) and two phosphane fragments (one on each amidinate moiety) as coordinable groups, have been synthesized from the benzamidinum salt [H2bzamP]Cl and GeCl2(dioxane) or SnCl2 in 2:1 mol ratio. A preliminary inspection of their coordination chemistry has shown that their amidinate group can also be involved in the bonding with the metal atoms as tridentate ENP and tetradentate PENP' coordination modes have been observed for the ECl(bzamP)2 ligand of [Ir{κ3E,N,P-ECl(bzamP)2}(cod)] (E = Ge (3a) and Sn (3b); cod = η4-1,5-cyclooctadiene) and the E(bzamP)2 ligand of [Ni{κ4E,N,P,P'-E(bzamP)2}] (E = Ge (4a) and Sn (4b)), which are products of reactions of 2a and 2b with [IrCl(cod)]2 (1:0.5 mol ratio) and [Ni(cod)2] (1:1 mol ratio), respectively. These products contain a 5-membered NCNEM ring that results from the insertion of the metal M atom into an E-N bond of 2a and 2b. Additionally, while iridium(I) complexes 3a and 3b are chloridotetryl derivatives (insertion of the tetrylene E atom into the Ir-Cl bond has also occurred) that have an uncoordinated phosphane group, nickel(0) complexes 4a and 4b contain a tetrylene fragment that, maintaining the lone pair, behaves as a σ-acceptor (Z-type) ligand.

Comparison of Cyclic and Linear Poly(lactide)s Using Small-Angle Neutron Scattering

Small-angle neutron scattering (SANS) experiments were conducted on cyclic and linear polymers of racemic and l-lactides (PLA) with the goal of comparing chain configurations, scaling, and effective polymer-solvent interactions of the two topologies in acetone-d ₆ and THF-d ₈. There are limited reports of SANS results on cyclic polymers due to the lack of substantial development in the field until recently. Now that pure, well-defined cyclic polymers are accessible, unanswered questions about their rheology and physical conformations can be better investigated. Previously reported SANS experiments have used cyclic and linear polystyrene samples; therefore, our work allowed for direct comparison using a contrasting (structurally and sterically) polymer. We compared SANS results of cyclic and linear PLA samples with various microstructures and molecular weights at two different temperatures, allowing for comparison with a wide range of variables. The results followed the trends of previous experiments, but much greater differences in the effective polymer-solvent interaction parameters between cyclic and linear forms of PLA were observed, implying that the small form factor and hydrogen bonding in PLA allowed for much more compact conformations in the cyclic form only. Also, the polymer microstructure was found to influence polymer-solvent interaction parameters substantially. These results illustrate how the difference in polymer-solvent interactions between cyclic and linear polymers can vary greatly depending on the polymer in question and the potential of neutron scattering as a tool for identification and characterization of the cyclic topology.

N-O Ligand Supported Stannylenes: Preparation, Crystal, and Molecular Structures

A new series of tin(II) complexes (1, 2, 4, and 5) were successfully synthesized by employing hydroxy functionalized pyridine ligands, specifically 2-hydroxypyridine (hpH), 8-hydroxyquinoline (hqH), and 10-hydroxybenzo[h]quinoline (hbqH) as stabilizing ligands. Complexes [Sn(μ-κ2ON-OC5H4N)(N{SiMe3}2)]2 (1) and [Sn4(μ-κ2ON-OC5H4N)6(κ1O-OC5H4N)2] (2) are the first structurally characterized examples of tin(II) oxypyridinato complexes exhibiting {Sn2(OCN)2} heterocyclic cores. As part of our study, 1H DOSY NMR experiments were undertaken using an external calibration curve (ECC) approach, with temperature-independent normalized diffusion coefficients, to determine the nature of oligomerisation of 2 in solution. An experimentally determined diffusion coefficient (298 K) of 6.87 × 10−10 m2 s−1 corresponds to a hydrodynamic radius of Ca. 4.95 Å. This is consistent with the observation of an averaged hydrodynamic radii and equilibria between dimeric [Sn{hp}2]2 and tetrameric [Sn{hp}2]4 species at 298 K. Testing this hypothesis, 1H DOSY NMR experiments were undertaken at regular intervals between 298 K–348 K and show a clear change in the calculated hydrodynamic radii form 4.95 Å (298 K) to 4.35 Å (348 K) consistent with a tetramer ⇄ dimer equilibria which lies towards the dimeric species at higher temperatures. Using these data, thermodynamic parameters for the equilibrium (ΔH° = 70.4 (±9.22) kJ mol−1, ΔS° = 259 (±29.5) J K−1 mol−1 and ΔG°298 = −6.97 (±12.7) kJ mol−1) were calculated. In the course of our studies, the Sn(II) oxo cluster, [Sn6(m3-O)6(OR)4:{Sn(II)(OR)2}2] (3) (R = C5H4N) was serendipitously isolated, and its molecular structure was determined by single-crystal X-ray diffraction analysis. However, attempts to characterise the complex by multinuclear NMR spectroscopy were thwarted by solubility issues, and attempts to synthesise 3 on a larger scale were unsuccessful. In contrast to the oligomeric structures observed for 1 and 2, single-crystal X-ray diffraction studies unambiguously establish the monomeric 4-coordinate solid-state structures of [Sn(κ2ON-OC9H6N)2)] (4) and [Sn(κ2ON-OC13H8N)2)] (5).

Calix[4]pyrrolato Stannate(II): A Tetraamido Tin(II) Dianion and Strong Metal‐Centered σ‐Donor

Anionic, metal‐centered nucleophiles are emerging compounds with unique reactivities. Here, we describe the isolation and full characterization of the first tetraamido tin(II) dianion, its behavior as ligand towards transition metals, and its reactivity as a tin‐centered nucleophile. Experimental values such as the Tolman electronic parameter (TEP) and computations attest tin‐located σ‐donor ability exceeding that of carbenes or electron‐rich phosphines. Against transition metals, the stannate(II) can act as η¹‐ or η⁵‐type ligand. With aldehydes, it reacts by hydride substitution to give valuable acyl stannates. The reductive dehalogenation of iodobenzene indicates facile redox pathways mediated by halogen bond interaction. Calix[4]pyrrolato stannate(II) represents the first example of this macrocyclic ligand in low‐valent p‐block element chemistry.

Synthesis, Properties, and Applications of Bio-Based Cyclic Aliphatic Polyesters

Cyclic polymers have long been reported in the literature, but their development has often been stunted by synthetic difficulties such as the presence of linear contaminants. Research into the synthesis of these polymers has made great progress in the past decade, and this review covers the synthesis, properties, and applications of cyclic polymers, with an emphasis on bio-based aliphatic polyesters. Synthetic routes to cyclic polymers synthesized from bioderived monomers, alongside mechanistic descriptions for both ring closure and ring expansion polymerization approaches, are reviewed. The review also highlights some of the unique physical properties of cyclic polymers together with potential applications. The findings illustrate the substantial recent developments made in the syntheses of cyclic polymers, as well as the progress which can be made in the commercialization of bio-based polymers through the versatility this topology provides.

Prospects of Using Biocatalysis for the Synthesis and Modification of Polymers

Trends in the dynamically developing application of biocatalysis for the synthesis and modification of polymers over the past 5 years are considered, with an emphasis on the production of biodegradable, biocompatible and functional polymeric materials oriented to medical applications. The possibilities of using enzymes not only as catalysts for polymerization but also for the preparation of monomers for polymerization or oligomers for block copolymerization are considered. Special attention is paid to the prospects and existing limitations of biocatalytic production of new synthetic biopolymers based on natural compounds and monomers from biomass, which can lead to a huge variety of functional biomaterials. The existing experience and perspectives for the integration of bio- and chemocatalysis in this area are discussed.