Synthesis and catalytic activities of a Zn(ii) based metallomacrocycle and a metal-organic framework towards one-pot deacetalization-Knoevenagel tandem reactions under different strategies: a comparative study

Thiophene-Functionalized Cadmium(II)-Based Metal-Organic Frameworks for CO2 Adsorption with Gate-Opening Effect, Separation, and Catalytic Conversion

Two new porous three-dimensional cadmium(II) metal-organic frameworks (MOFs) containing thiophene-appended carboxylate acid ligands, formulated as [Cd(L1)(4,4'-Bipy)]n.2n(DMF) (1) and [Cd(L2)(4,4'-Bipy)]n.2n(DMF) (2) [where L1 = 5-{(thiophen-2-ylmethyl)amino}isophthalate, L2 = 5-{(thiophen-3-ylmethyl)amino}isophthalate, 4,4'-Bipy = 4,4'-bipyridine, and DMF = N,N'-dimethylformamide] have been synthesized and structurally characterized. The gas adsorption analysis of the activated MOFs shows that they specifically capture CO2 (uptake amount 4.36 mmol/g under 1 bar at 195 K) over N2 and CH4. Moreover, both MOFs show a gate-opening-closing phenomenon, which features the S-shaped isotherms with impressive hysteretic desorption during the CO2 adsorption-desorption process at 195 K. Ideal adsorbed solution theory (IAST) calculations of these MOFs displayed that the obtained selectivity values for CO2/CH4 (50:50) and CO2/N2 (15:85) are approximately 8.6-23 and 93-565, respectively. Configurational bias Monte Carlo simulation was performed to understand the mechanism behind the better CO2 adsorption by these MOFs. Catalytic activity of the MOFs for the CO2 fixation reactions with different epoxides to form cyclic carbonates were tested. These MOFs demonstrated a significantly high conversion (94-99%) of epichlorohydrin to the corresponding cyclic carbonate within 8 h of reaction time at 1 bar of CO2 pressure, at 70 °C, and they can be reused up to five cycles without losing considerably their activity.

Halogen-Decorated Metal-Organic Frameworks for Efficient and Selective CO2 Capture, Separation, and Chemical Fixation with Epoxides under Mild Conditions

In the present work, three novel halogen-appended cadmium(II) metal-organic frameworks [Cd2(L1)2(4,4'-Bipy)2]n·4n(DMF) (1), [Cd2(L2)2(4,4'-Bipy)2]n·3n(DMF) (2), and [Cd(L3)(4,4'-Bipy)]n·2n(DMF) (3) [where L1 = 5-{(4-bromobenzyl)amino}isophthalate; L2 = 5-{(4-chlorobenzyl)amino}isophthalate; L3 = 5-{(4-fluorobenzyl)amino}isophthalate; 4,4'-Bipy = 4,4'-bipyridine; and DMF = N,N'-dimethylformamide] have been synthesized under solvothermal conditions and characterized by various analytical techniques. The single-crystal X-ray diffraction analysis demonstrated that all the MOFs feature a similar type of three-dimensional structure having a binuclear [Cd2(COO)4(N)4] secondary building block unit. Moreover, MOFs 1 and 2 contain one-dimensional channels along the b-axis, whereas MOF 3 possesses a 1D channel along the a-axis. In these MOFs, the pores are decorated with multifunctional groups, i.e., halogen and amine. The gas adsorption analysis of these MOFs demonstrate that they display high uptake of CO2 (up to 5.34 mmol/g) over N2 and CH4. The isosteric heat of adsorption (Qst) value for CO2 at zero loadings is in the range of 18-26 kJ mol-1. In order to understand the mechanism behind the better adsorption of CO2 by our MOFs, we have also performed configurational bias Monte Carlo simulation studies, which confirm that the interaction between our MOFs and CO2 is stronger compared to those with N2 and CH4. Various noncovalent interactions, e.g., halogen (X)···O, Cd···O, and O···O, between CO2 and the halogen atom, the Cd(II) metal center, and the carboxylate group from the MOFs are observed, respectively, which may be a reason for the higher carbon dioxide adsorption. Ideal adsorbed solution theory (IAST) calculations of MOF 1 demonstrate that the obtained selectivity values for CO2/CH4 (50:50) and CO2/N2 (15:85) are ca. 28 and 193 at 273 K, respectively. However, upon increasing the temperature to 298 K, the selectivity value (S = 34) decreases significantly for the CO2/N2 mixture. We have also calculated the breakthrough analysis curves for all the MOFs using mixtures of CO2/CH4 (50:50) and CO2/N2 (50:50 and 15:85) at different entering gas velocities and observed larger retention times for CO2 in comparison with other gases, which also signifies the stronger interaction between our MOFs and CO2. Moreover, due to the presence of Lewis acidic metal centers, these MOFs act as heterogeneous catalysts for the CO2 fixation reactions with different epoxides in the presence of tetrabutyl ammonium bromide (TBAB), for conversion into industrially valuable cyclic carbonates. These MOFs exhibit a high conversion (96-99%) of epichlorohydrin (ECH) to the corresponding cyclic carbonate 4-(chloromethyl)-1,3-dioxolan-2-one after 12 h of reaction time at 1 bar of CO2 pressure, at 65 °C. The MOFs can be reused up to four cycles without compromising their structural integrity as well as without losing their activity significantly.

Zn-MOF as a Single Catalyst with Dual Lewis Acidic and Basic Reaction Sites for CO2 Fixation

Continuous increase in carbon dioxide (CO2) emissions are causing imbalances in the environment, which impact biodiversity and human health. The conversion of CO2 to cyclic carbonates by means of metal-organic frameworks (MOFs) as a heterogeneous catalyst is a prominent strategy for rectifying this imbalance. Herein, we have developed nitrogen-rich Zn (II) based metal-organic framework, [Zn(CPMT)(bipy)]n (CPMT = 1-(4-carboxyphenyl)-5-mercapto-1H-tetrazole; bipy = 4,4'-bipyridine), synthesized via a mixed ligand strategy. This Zn-MOF showed high chemical stability in both acidic and basic conditions, and in organic solvents for a long time. On account of the concurrent presence of acid-base active sites and strong chemical stability under abrasive conditions, this Zn-MOF was employed as an effective catalyst for the coupling of CO2 and epoxides, under atmospheric pressure, mild temperature, and neat conditions. This Zn-MOF shows remarkable activity by producing high yields of epichlorohydrin carbonate (98%) and styrene carbonate (82%) at atmospheric CO2 pressure, 70 °C temperature, and 24 h reaction time, with turnover numbers (TON) of 217 and 181, respectively. The Zn-MOF could be reused for up to seven cycles with structural and framework integrity. Overall, this work demonstrates the synthesis of a novel and highly efficient MOF for CO2 conversion.

Multistep Cascade Catalytic Reactions Employing Bifunctional Framework Compounds

Multistep cascade reactions are important to achieve atom as well as step economy over conventional synthesis. This approach, however, is limited due to the incompatibility of the available reactive centers in a catalyst. In the present study, new MOF compounds, [Zn₂(SDBA)(3-ATZ)₂]·solvent, I and II, with tetrahedral Zn centers as good Lewis acidic sites and the free amino group of the 3-amino triazole ligand as a strong Lewis base center were shown to perform 4-step cascade/tandem reaction in a facile manner. Effective conversion of benzaldehyde dimethyl acetal in the presence of excess nitromethane at 100 °C in water to 1-(1,3-dinitropropan-2-yl) benzene was achieved in 10 h with yields of ∼95% (I) and ∼94% (II). This 4-step cascade reaction proceeds via deacetalization (Lewis acid), Henry (Lewis base), and Michael (Lewis base) reactions. The present work highlights the importance of spatially separated functional groups in multistep tandem catalysis─the examples of which are not common.

Polyaromatic Group Embedded Cd(II)-Coordination Polymers for Microwave-Assisted Solvent-Free Strecker-Type Cyanation of Acetals

In this work, two new 1D Cd(II) coordination polymers (CPs), [Cd(L1)(NMF)₂]_n (1) and [Cd(L2)(DMF)(H₂O)₂]_n·n(H₂O) (2), have been synthesized, characterized and employed as catalysts for the microwave-assisted solvent-free Strecker-type cyanation of different acetals. Solvothermal reaction between the pro-ligand, 5-{(pyren-1-ylmethyl)amino}isophthalic acid (H₂L1) or 5-{(anthracen-9-ylmethyl)amino}isophthalic acid (H₂L2), and Cd(NO₃)₂.6H₂O in the presence of NMF or DMF:THF solvent, produces the coordination polymer 1 or 2, respectively. These frameworks were characterized by single-crystal and powder X-ray diffraction analyses, ATR-FTIR, elemental and thermogravimetry analysis. Their structural analysis revealed that both CPs show one-dimensional structures, but CP 1 has a 1D double chain type structure whereas CP 2 is a simple one-dimensional network. In CP 1, the dinuclear {Cd₂(COO)₄} unit acts as a secondary building unit (SBU) and the assembly of dinuclear SBUs with deprotonated ligand (L1^2-) led to the formation of a 1D double chain framework. In contrast, no SBU was observed in CP 2. To test the catalytic effectiveness of these 1D compounds, the solvent-free Strecker-type cyanation reactions of different acetals in presence of trimethylsilyl cyanide (TMSCN) was studied with CPs 1 and 2 as heterogenous catalysts. CP 1 displays a higher activity (yield 95%) compared to CP 2 (yield 84%) after the same reaction time. This is accounted for by the strong hydrogen bonding packing network in CP 2 that hampers the accessibility of the metal centers, and the presence of the dinuclear Cd(II) SBU in CP 1 which can promote the catalytic process in comparison with the mononuclear Cd(II) center in CP 2. Moreover, the recyclability and heterogeneity of both CPs were tested, demonstrating that they can be recyclable for at least for four cycles without losing their structural integrity and catalytic activity.

Polyaromatic Carboxylate Ligands Based Zn(II) Coordination Polymers for Ultrasound-Assisted One-Pot Tandem Deacetalization–Knoevenagel Reactions

Solvothermal reactions between the polyaromatic group containing carboxylic acid pro-ligands 5-{(pyren-1-ylmethyl)amino}isophthalic acid (H2L1) and 5-{(anthracen-9-ylmethyl)amino}isophthalic acid (H2L2) with Zn(NO3)2·6H2O led to the formation of the new 1D coordination polymer [Zn(L1)(NMF)]n (1) and four other coordination polymers, [Zn(L1)(DMF)]n (2), [Zn(L1)(4,4′-Bipy)]n (3), [Zn(L2)(DMF)(H2O)2]n·n(H2O) (4) and [Zn2(L2)2(DMF)(CH3OH)]n (5), which were previously reported by our group. Single crystal X-ray diffraction analyses revealed that the CP 1 has a one-dimensional (1D) double-chain-type structure similar to that of CP 2. For CP 3, the assembly of the Zn(II) ion with a deprotonated L12− ligand and 4,4′-bipyridine produces a 3D network. CP 4 and 5 exhibit 1D linear and 2D layered-type structures. The ultrasound-assisted tandem reactions promoted by CPs have not yet been well studied. Thus, in the present work, we have investigated the catalytic activities of the newly synthesized CP 1, as well as of the other CPs 2–5, towards the tandem deacetalization–Knoevenagel condensation reactions of various acetals under ultrasonic irradiation. They proved to be highly efficient, with special emphasis on catalyst 1, which completely converted the substrate (benzaldehyde dimethyl acetal) into the desired product (2-benzylidenemalononitrile) after 2 h. The stability of the catalysts, namely regarding the action of ultrasonic radiation, was demonstrated by their reuse, where only a slight loss of activity was observed after four cycles. Heterogeneity was also demonstrated, and no leaching was detected over the various cycles.

Vectorial Catalysis in Surface-Anchored Nanometer-Sized Metal-Organic Frameworks-Based Microfluidic Devices

Vectorial catalysis-controlling multi-step reactions in a programmed sequence and by defined spatial localization in a microscale device-is an enticing goal in bio-inspired catalysis research. However, translating concepts from natural cascade biocatalysis into artificial hierarchical chemical systems remains a challenge. Herein, we demonstrate integration of two different surface-anchored nanometer-sized metal-organic frameworks (MOFs) in a microfluidic device for modelling vectorial catalysis. Catalyst immobilization at defined sections along the microchannel and a two-step cascade reaction was conducted with full conversion after 30 seconds and high turnover frequencies (TOF≈105  h-1 ).

Nanocage-based {In2Tm2}-organic framework for efficiently catalyzing the cycloaddition reaction of CO2 with epoxides and Knoevenagel condensation

The combination of [In2Tm2(μ2-OH)2(CO2)10(H2O)2] clusters and H5BDCP ligand generated a highly robust nanoporous MOF with high catalytic performance in the cycloaddition reaction of epoxides with CO2 and Knoevenagel condensation.

Designing and Construction of Polyaromatic Group Containing Cd(II)-based Coordination Polymers for Solvent-free Strecker-type Cyanation of Acetals

In the present work, we have synthesized and characterized two novel Cd(II) coordination polymers, [Cd4(L1)4(DMF)6]n.3n(DMF) (1) and [Cd2(L2)2(DMF)3]n.2n(DMF) (2), and studied their catalytic application. They were synthesized via solvothermal reaction...

Nanochannel-Based {BaZn}-Organic Framework for Catalytic Activity on Cycloaddition Reaction of Epoxides with CO2 and Deacetalization-Knoevenagel Condensation

Because of the integrated properties from chemically dissimilar metals, microporous heterometallic MOFs have wider potential applicability, which prompts us to explore the tendency collocation of different metal cations in the...

Structural chemistry of host – guest molecular architectures based on mercury-containing macrocycles

Metallomacrocycles that include several metal ions with the Lewis acid properties are peculiar antipodes of crown ethers (referred to as ‘anticrowns’ in the literature). Recently these architectures have been extensively investigated when searching for efficient and selective anion receptors. In this review, we analyze the data on the molecular and crystal structures of supramolecular complexes of mercury-containing macrocycles (hosts) with anions or neutral nucleophiles (guests). The emphasis is on the identification and systematization of the structure types of complexes in dependence of the guest molecule nature, as well as the macrocycle composition and structure. The factors affecting the selectivity of coordination and competitive ability of various electron donor moieties of guest molecules to binding to the macrocycle are considered. The data in the literature on the nonvalent host – guest and host – host interactions, which are responsible for the formation of molecular complexes and their supramolecular association in crystals, are analyzed. The formulated structural regularities of these coordination compounds with an unusual type of molecular architecture open ways to design directly promising molecular materials on their basis.

The bibliography includes 161 references.

Pyrene Carboxylate Ligand Based Coordination Polymers for Microwave-Assisted Solvent-Free Cyanosilylation of Aldehydes

The new coordination polymers (CPs) [Zn(μ-1κO¹:1κO²-L)(H₂O)₂]_n·n(H₂O) (1) and [Cd(μ₄-1κO¹O²:2κN:3,4κO³-L)(H₂O)]_n·n(H₂O) (2) are reported, being prepared by the solvothermal reactions of 5-{(pyren-4-ylmethyl)amino}isophthalic acid (H₂L) with Zn(NO₃)₂.6H₂O or Cd(NO₃)₂.4H₂O, respectively. They were synthesized in a basic ethanolic medium or a DMF:H₂O mixture, respectively. These compounds were characterized by single-crystal X-ray diffraction, FTIR spectroscopy, thermogravimetric and elemental analysis. The single-crystal X-ray diffraction analysis revealed that compound 1 is a one dimensional linear coordination polymer, whereas 2 presents a two dimensional network. In both compounds, the coordinating ligand (L^2-) is twisted due to the rotation of the pyrene ring around the CH₂-NH bond. In compound 1, the Zn(II) metal ion has a tetrahedral geometry, whereas, in 2, the dinuclear [Cd₂(COO)₂] moiety acts as a secondary building unit and the Cd(II) ion possesses a distorted octahedral geometry. Recently, several CPs have been explored for the cyanosilylation reaction under conventional conditions, but microwave-assisted cyanosilylation of aldehydes catalyzed by CPs has not yet been well studied. Thus, we have tested the solvent-free microwave-assisted cyanosilylation reactions of different aldehydes, with trimethylsilyl cyanide, using our synthesized compounds, which behave as highly active heterogeneous catalysts. The coordination polymer 1 is more effective than 2, conceivably due to the higher Lewis acidity of the Zn(II) than the Cd(II) center and to a higher accessibility of the metal centers in the former framework. We have also checked the heterogeneity and recyclability of these coordination polymers, showing that they remain active at least after four recyclings.

1D Zn(II) Coordination Polymers as Effective Heterogeneous Catalysts in Microwave-Assisted Single-Pot Deacetalization-Knoevenagel Tandem Reactions in Solvent-Free Conditions

The new 1D CPs [Zn(L1)(H2O)4]n.nH2O (1) and [Zn(L2)(H2O)2]n (2) [L1 = 1,1′-(ethane-1,2-diyl)bis(6-oxo-1,6-dihydropyridine-3-carboxylic acid); L2 = 1,1′-(propane-1,3-diyl)bis(6-oxo-1,6-dihydropyridine-3-carboxylic acid)] were prepared from flexible dicarboxylate pro-ligands (H2L1 and H2L2). Both CPs 1 and 2 were characterized by elemental, FTIR, and powder X-ray diffraction analysis. Their geometry and the structural features were unveiled by single-crystal X-ray diffraction analysis. The underlying topology of the CPs was illustrated by the topological analysis of the H-bonded structure of CP 1, which revealed a 3,4,6-connected trinodal net. On the other hand, topological analysis on the hydrogen-bonded network of CP 2 showed a 2,3,3,4,6,7-connected hexanodal net. The thermal stability of the CPs was investigated by thermogravimetric analysis. CPs 1 and 2 act as heterogeneous catalysts in one-pot tandem deacetalization–Knoevenagel condensation reactions under environmentally mild conditions. CPs 1 exhibits a yield of ca. 91% in a microwave-assisted solvent-free medium, whereas a slightly lower yield was obtained for CP 2 (87%) under the same experimental protocol. The recyclability of catalyst 1 was also assessed. To our knowledge, these are the first Zn(II)-based CPs to be applied as heterogeneous catalysts for the above tandem reactions under environmentally friendly conditions.