X-ray pair distribution function analysis and electrical and electrochemical properties of cerium doped Li5La3Nb2O12 garnet solid-state electrolyte

Jet-Printable, Low-Melting-Temperature Ga-xSn Eutectic Composites: Application in All-Solid-State Batteries

Low-melting-point Ga-xSn eutectic composites and natural silicate mineral powders were used as the electrode and solid-state electrolyte, respectively, in all-solid-state batteries for green energy storage systems. The influences of the Sn content in the Ga-xSn composite electrode on the electrochemical performance of the batteries were evaluated, and liquid composites with a Sn concentration of up to 30 wt.% demonstrated suitability for electrode fabrication through dip coating. Sodium-enriched silicate was synthesized to serve as the solid-state electrolyte membrane because of the abundance of water molecules in its interlayer structure, enabling ion exchange. The battery capacity increased with the Sn content of the Ga-xSn anode. The formation of intermetallic compounds and oxides (CuGa2, Ga2O3, Cu6Sn5, and SnO2) resulted in a high charge-discharge capacity and stability. The Ga-Sn composite electrode for all-solid-state batteries exhibits a satisfiable capacity and stability and shows potential for jet-printed electrode applications.

H3PO4-Induced Nano-Li3PO4 Pre-reduction Layer to Address Instability between the Nb-Doped Li7La3Zr2O12 Electrolyte and Metallic Li Anode

Solid-state batteries based on a metallic Li anode and nonflammable solid electrolytes (SEs) are anticipated to achieve high energy and power densities with absolute safety. In particular, cubic garnet-type Nb-doped Li₇La₃Zr₂O₁₂ (Nb-LLZO) SEs possess superior ionic conductivity, are feasible to prepare under ambient conditions, have strong thermal stability, and are of low cost. However, the interfacial compatibility with Li metal and Li dendrite hazards still hinder the applications of Nb-LLZO. Herein, a quick and efficient solution was applied to address this issue, generating a nano-Li₃PO₄ pre-reduction layer from the reaction of H₃PO₄ with the ion-exchanged passivation layer (Li₂CO₃/LiOH) on the surface of Nb-LLZO. A lithiophilic, electrically insulating interlayer is in situ created when the Li₃PO₄ modified layer interacts with molten Li, successfully preventing the reduction of Nb⁵⁺. The interlayer, which mostly consists of Li₃P and Li₃PO₄, also has a high shear modulus and relatively high Li⁺ conductivity, which effectively inhibit the growth of Li dendrites. The Li|Li₃PO₄|Nb-LLZO|Li₃PO₄|Li symmetric cells stably cycled for over 5000 h at 0.05 mA cm^-2 and over 1000 h at a high rate of 0.15 mA cm^-2 without any short circuits. The LiFePO₄ and S/C hybrid solid-state batteries using the modified Nb-LLZO electrolyte also demonstrated good electrochemical performances, confirming the practical application of this interfacial engineering in various solid-state battery systems. This work offers an efficient solution to the instability issue between the Nb-LLZO SE and metallic Li anode.

Assessing the Importance of Cation Size in the Tetragonal-Cubic Phase Transition in Lithium-Garnet Electrolytes

Lithium garnets are promising solid-state electrolytes for next-generation lithium-ion batteries. These materials have high ionic conductivity, a wide electrochemical window and stability with Li metal. However, lithium garnets have a maximum limit of seven lithium atoms per formula unit (e.g., La₃ Zr₂ Li₇ O₁₂ ), before the system transitions from a cubic to a tetragonal phase with poor ionic mobility. This arises from full occupation of the Li sites. Hence, the most conductive lithium garnets have Li between 6-6.55 Li per formula unit, which maintains the cubic symmetry and the disordered Li sub-lattice. The tetragonal phase, however, forms the highly conducting cubic phase at higher temperatures, thought to arise from increased cell volume and entropic stabilisation permitting Li disorder. However, little work has been undertaken in understanding the controlling factors of this phase transition, which could enable enhanced dopant strategies to maintain room temperature cubic garnet at higher Li contents. Here, a series of nine tetragonal garnets were synthesised and analysed by variable temperature XRD to understand the dependence of site substitution on the phase transition temperature. Interestingly the octahedral site cation radius was identified as the key parameter for the transition temperature with larger or smaller dopants altering the transition temperature noticeably. A site substitution was, however, found to make little difference irrespective of significant changes to cell volume.

Evaluation of Ga0.2Li6.4Nd3Zr2O12 garnets: exploiting dopant instability to create a mixed conductive interface to reduce interfacial resistance for all solid state batteries

The next major leap in energy storage is thought to arise from a practical implementation of all solid-state batteries, which remain largely confined to the small scale due to issues in manufacturing and mechanical stability. Lithium batteries are amongst the most sought after, for the high expected energy density and improved safety characteristics, however the challenge of finding a suitable solid-state electrolyte remains. Lithium rich garnets are prime contenders as electrolytes, owing to their high ionic conductivity (>0.1 mS cm^-1), wide electrochemical window (0-6 V) and stability with Li metal. However, the high Young's modulus of these materials, poor wetting of Li metal and rapid formation of Li₂CO₃ passivating layers tends to give a detrimentally large resistance at the solid-solid interface, limiting their application in solid state batteries. Most studies have focused on La based systems, with very little work on other lanthanides. Here we report a study of the Nd based garnet Ga_0.2Li_6.4Nd₃Zr₂O₁₂, illustrating substantial differences in the interfacial behaviour. This garnet shows very low interfacial resistance attributed to dopant exsolution which, when combined with moderate heating (175 °C, 1 h) with Li metal, we suggest forms Ga-Li eutectics, which significantly reduces the resistance at the Li/garnet interface to as low as 67 Ω cm² (much lower than equivalent La based systems). The material also shows intrinsically high density (93%) and good conductivity (≥0.2 mS cm^-1) via conventional furnaces in air. It is suggested these garnets are particularly well suited to provide a mixed conductive interface (in combination with other garnets) which could enable future solid-state batteries.

Water based synthesis of highly conductive GaxLi7-3xLa3Hf2O12 garnets with comparable critical current density to analogous GaxLi7-3xLa3Zr2O12 systems

Next generation lithium ion batteries are envisaged as those which feature an all solid-state architecture. This will enable the higher energy density storage required to meet the demands of modern society, especially for the growing electric vehicle market. Solid state batteries have, however, proved troublesome to implement commercially due to the lack of a suitable solid-state electrolyte, which needs to be highly conductive, have a low interfacial resistance and a suitably wide electrochemical stability window. Garnet materials are potential contenders for these batteries, demonstrating many of the desired properties, although there remain challenges to overcome. Here we report a facile synthesis of Li₇La₃Hf₂O₁₂ and Ga/Al_xLi_7-3xLa₃Hf₂O₁₂ garnets, with the synthesis of Ga_0.2Li_6.4La₃Hf₂O₁₂ requiring only dissolution of precursors in water and heating to 700 °C. Ga_0.2Li_6.4La₃Hf₂O₁₂ was shown to display a high room temperature conductivity (0.373 mS cm^-1 at 28 °C). Moreover, in Li|garnet|Li cells, we observed a comparable critical current density compared to Ga_0.2Lai_6.4La₃Zr₂O₁₂, despite a lower density and higher area specific resistance compared to literature values, suggesting Hf systems may be further engineered to deliver additional improvements for use in future solid state batteries.