Optical detection strategies for Ni(II) ion using metal-organic chemosensors: from molecular design to environmental applications

Nickel is an important element utilized in various industrial/metallurgical processes, such as surgical and dental prostheses, Ni-Cd batteries, paint pigments, electroplating, ceramics, computer magnetic tapes, catalysis, and alloy manufacturing. However, its extensive use and associated waste production have led to increased nickel pollution in soils and water bodies, which adversely affects human health, animals and plants. This issue has prompted researchers to develop various optical probes, hereafter luminescent/colorimetric sensors, for the facile, sensitive and selective detection of nickel, particularly in biological and environmental contexts. In recent years, numerous functionalized chemosensors have been reported for imaging Ni2+, both in vivo and in vitro. In this context, metal-based receptors offer clear advantages over conventional organic sensors (viz., organic ligands, polymers, and membranes) in terms of cost, durability, stability, water solubility, recyclability, chemical flexibility and scope. This review highlights recent advancements in the design and fabrication of hybrid receptors (i.e., metal complexes and MOFs) for the specific detection of Ni2+ ions in complex environmental and biological mixtures.

Multifunctional near-infrared fluorescent probe for sensing of lysine and Cu2+/Fe3+ and relay detection of biothiols

Lysine (Lys), Cu2+ and Fe3+ ions and biothiols are essential to a myriad of biological and pathological pathways, and their dysregulation is implicated in a variety of diseases. Development of fluorescent probes capable of detecting multiple analytes may be of great significance for early and accurate diagnosis of diseases and remains a huge challenge. In this context, a novel coumarin-dicyanoisophorone-based probe, engineered for the concurrent sensing of Lys, Cu2+, Fe3+ and biothiols was developed. The probe exhibited turn-on response to Lys, colorimetric and turn-off response to Cu2+ by formation of the probe-Cu2+ complex, and ratiometric sensing of Fe3+. In addition, the probe-Cu2+ complex served colorimetric and fluorescence turn-on sensor for biothiols. The limit of detection (LOD) values for the analytes were in the range of 0.30-4.40 μM. Sensing mechanisms based on intramolecular charge transfer (ICT) and iron-mediated hydrolysis of Schiff base were proposed and substantiated through density functional theory (DFT) calculations. Application of the probe for living cell bioimaging was demonstrated.

Turn-on detection of Al3+ ions using quinoline-based tripodal probe: mechanistic investigation and live cell imaging applications

In this study, an easily synthesizable Schiff base probe TQSB having a quinoline fluorophore is demonstrated as a fluorescent and colorimetric turn-on sensor for Al3+ ions in a semi-aqueous medium (CH3CN/water; 4 : 1; v/v). Absorption, emission and colorimetric studies clearly indicated that TQSB exhibited a high selectivity toward Al3+, as observed from its excellent binding constant (Kb = 3.8 × 106 M-1) and detection limit (7.0 nM) values. TQSB alone was almost non-fluorescent in nature; however, addition of Al3+ induced intense fluorescence at 414 nm most probably due to combined CHEF (chelation-enhanced fluorescence) and restricted PET effects. The sensing mechanism was established via Job's plot, NMR spectroscopy, ESI-mass spectrometry, and density functional theory (DFT) analyses. Furthermore, to evaluate the applied potential of probe TQSB, its sensing ability was studied in real samples such as soil samples and Al3+-containing Digene gastric tablets as well as on low-cost filter paper strips. Fluorescence microscopy imaging experiments further revealed that TQSB can be used as an effective probe to detect intracellular Al3+ in live cells with no cytotoxicity.

An Indole-based Chromofluorogenic Probe for Detection of Trivalent Al3+, Ga3+, In3+ and Fe3+ Ions

An easily synthesizable indole-derived chromofluorogenic probe InNS has been demonstrated for recognition of trivalent metal ions (i. e., Al3+, Ga3+, In3+ and Fe3+). Both UV-Vis and emission spectral studies have been employed to assess the cation sensing ability of InNS in semi-aqueous medium. This probe exhibited a chromogenic response for these metal ions, and the related change was accompanied with the appearance of a new absorption near 376 nm. An obvious color change from pale yellow to dark yellow could also be noticed upon addition of the aforementioned metal ions to the probe's solution. Distinctively from the UV-Vis analysis, the fluorescence behavior of InNS was completely different; it displayed a 'turn-on' fluorescence response for only Al3+ among all the studied cations. The detection limit and the association constant (Ka) for Al3+ were determined to be 12.5 nM and 6.85×106 M-1, respectively. A potential 1 : 1 binding mode of Al3+-InNS has been established based on Job's plot, 1H NMR and DFT analyses. The reversibility experiment was conducted using strongly chelating EDTA ion, and a corresponding logic gate has been devised. In terms of practical applications, the InNS has been utilized to detect Al3+ in human breast carcinoma (MCF-7) cell lines displaying promising 'turn-on' bioimaging experiments.

A PEDOT enhanced covalent organic framework (COF) fluorescent probe for in vivo detection and imaging of Fe3

Simple and accurate in vivo monitoring of Fe3+ is essential for gaining a better understanding of its role in physiological and pathological processes. A novel fluorescent probe was synthesized via in situ solid-state polymerization of 3,4-ethylenedioxythiophene (PEDOT) in the pore channels of a covalent organic framework (COF). The PEDOT@COF fluorescent probe exhibited an absolute quantum yield (QY) 3 times higher than COF. In the presence of Fe3+ the PEDOT@COF 475 nm fluorescence emission, 365 nm excitation, is quenched within 180 s. Fluorescence quenching is linear with Fe3+ in the concentration range of 0-960 μM, with a detection limit of 0.82 μM. The fluorescence quenching mechanism was attributed to inner filter effect (IEF), photoinduced electron transfer (PET) and static quenching (SQE) between PEDOT@COF and Fe3+. A paper strip-based detector was designed to facilitate practical applicability, and the PEDOT@COF probe successfully applied to fluorescence imaging of Fe3+ levels in vivo. This work details a tool of great promise for enabling detailed investigations into the role of Fe3+ in physiological and pathological diseases.

A quinoline derived Schiff base as highly selective 'turn-on' probe for fluorogenic recognition of Al3+ ion

A quinoline-derived Schiff base QnSb has been synthesized for fluorescent and colorimetric recognition of Al3+ ions in a semi-aqueous medium. The compound QnSb has been characterized by elemental analysis, FT-IR, 1H/13C NMR, UV-Vis and fluorescence spectral techniques. The crystal structure of the QnSb was confirmed by single crystal X-ray diffraction (SC-XRD) analysis. Notably, almost non-fluorescent QnSb served as a 'turn on' responsive probe for Al3+ by inducing a remarkable fluorescence enhancement at 422 nm when excited at 310 nm. The probe QnSb exhibited high selectivity for Al3+ in CH3CN/H2O (4:1, v/v) solution over several competing metal ions (e.g., Mg2+, Pb2+, Zn2+, Cd2+, Co2+, Cu2+, Ca2+, Ni2+, Fe3+/2+, Cr3+, Mn2+, Sn2+, and Hg2+). The limit of detection (LoD) was computed as low as 15.8 nM which is significantly lower than the permissible limit set by WHO for Al3+ ions in drinking water. A 1:1 binding stoichiometry of complex QnSb-Al3+ was established with the help of Job's plot, ESI-MS, NMR and DFT analyses. Based on its remarkable sensing ability, the probe QnSb was utilized to establish molecular logic gates, and the fluorescence detection of Al3+ could clearly be demonstrated on the filter paper test strips.

Spectroscopic and theoretical studies on a novel bis(salamo)-like probe for highly effective fluorimetric-colorimetric identification of Fe3+ and Cu2+ in aquo-organic medium

A novel bis(salamo)-type sensor FT for fluorescence-colorimetric recognition of Fe3+/Cu2+ has been created, which revealed significant fluorescent performance and colorimetric sensing ability for Cu2+ and Fe3+ ions, superior to other related competitive metal ions. Interestingly, the binding of the FT probe with Cu2+ ions manifested an instant color change from colorless to red in sunlight, which is detectable by the naked-eye, and a fluorescence turn-off response under UV light for Fe3+ and Cu2+. The results demonstrated that the probe exhibits better sensitivity, greater affinity and lower limit of detection leading to quick response time in an aquo-organic medium. The excited state property of the FT probe and in the presence of Cu2+/Fe3+ was evaluated on the basis of DFT & TD-DFT results. Furthermore, test strips have been provided for convenient monitoring of Cu2+ and Fe3+ ions by naked eye and fluorescence method.

Fluorescent and chromogenic organic probes to detect group 10 metal ions: design strategies and sensing applications

Group 10 metals including Ni, Pd and Pt have been extensively applied in various essential aspects of human social life, material science, industrial manufactures, medicines and biology. The ionic forms of these metals are involved in several biologically important processes due to their strong binding capability towards different biomolecules. However, the mishandling or overuse of such metals has been linked to serious contamination of our ecological system, more specifically in soil and water bodies with acute consequences. Therefore, the detection of group 10 metal ions in biological as well as environmental samples is of huge significance from the human health point of view. Related to this, considerable efforts are underway to develop adequately efficient and facile methods to achieve their selective detection. Optical sensing of metal ions has gained increasing attention of researchers, particularly in the environmental and biological settings. Innovatively designed optical probes (fluorescent or colorimetric) are usually comprised of three basic components: an explicitly tailored receptor unit, a signalling unit and a clearly defined reporter unit. This review deals with the recent progress in the design and fabrication of fluorescent or colorimetric organic sensors for the detection of group 10 metal ions (Ni(II), Pd(II) and Pt(II)), with attention to the general aspects for design of such sensors.

Bonding in Nitrile Photo-dissociating Ruthenium Drug Candidates --A Local Vibrational Mode Study

In this work, we investigated bonding features 15 ruthenium complexes of the type [Ru(tpy)(L)-(CH3CN)]n+, containing the tridentate tpy ligand (tpy = 2,2':6',2'--terpyridine) and various bidentate ancillary ligands, 12 compounds originally synthesized by Loftus et al. (J. Phys. Chem. C 123, 10291-10299 (2019)) complemented with three additional complexes. The main focus of our work was to relate these local features to the experimental data of Loftus et al. which assess the efficiency of nitrile release in an indirect way via observed quantum yields for ruthenium water association after nitrile release. As a tool to quantitatively assess Ru-NC and Ru-L bonding we utilized the local vibrational mode analysis complemented by the topological analysis of the electron density and the natural bond orbital analysis. Interestingly, the stronger Ru-NC bonds have the greater observed quantum yields, leading to the conclusion that the observed quantum yields are a result of a complex interplay of several processes excluding a direct relationship between QY and Ru-NC or Ru-L bond strengths. We identified the ST splitting as one of the key players and not the Ru-NC bond strength, as one may have thought. In summary, this work has presented a modern computational tool set for the investigation of bonding features applied to nitrile photo-dissociating ruthenium drug candidates forming a valuable basis for future design and fine tuning of nitrile releasing ruthenium compounds, as well as for the understanding of how local properties affect overall experimental outcomes.

Bioinspired Heterobimetallic Photocatalyst () for Visible-Light-Driven C-H Oxidation of Organic Substrates via Dioxygen Activation

We report a bioinspired heterobimetallic photocatalyst RuIIchrom-FeIIIcat and its relevant applications toward visible-light-driven C-H bond oxidation of a series of hydrocarbons using O2 as the O-atom source. The RuII center absorbs visible light near 460 nm and triggers a cascade of electrons to FeIII to afford a catalytically active high-valent FeIV═O species. The in situ formed FeIV═O has been employed for several high-impact oxidation reactions in the presence of triethanolamine (TEOA) as the sacrificial electron donor.

Squaraine-Based Optical Sensors: Designer Toolbox for Exploring Ionic and Molecular Recognitions

Small molecule-based chromogenic and fluorogenic probes play an indispensable role in many sensing applications. Ideal optical chemosensors should provide selectivity and sensitivity towards a variety of analytes. Synthetic accessibility and attractive photophysical properties have made squaraine dyes an enticing platform for the development of chemosensors. This review highlights the versatility of modular assemblies of squaraine-based chemosensors and chemodosimeters that take advantage of the availability of various structurally and functionally diverse recognition motifs, as well as utilizing additional recognition capabilities due to the unique structural features of the squaraine ring.

Rhodol-derived turn-on fluorescent probe for copper ions with high selectivity and sensitivity

A new rhodol-derived fluorescent probe 1 with picolinate as the recognition receptor was designed and simply synthesized using a one-step reaction. With the concentration of added Cu²⁺ increases, it gradually turns pink, so the effect of naked eye detection can be achieved. The detection limit of probe 1 for Cu²⁺ is 42 nM, and the linear detection range was 0-2 μM. The experimental results showed that 1 was a fluorescent probe with high selectivity, good water solubility, and high sensitivity to Cu²⁺ . Probe 1 was successfully applied in cell imaging experiments and can detect the concentration of Cu²⁺ in water samples. All these indicate that probe 1 has the potential to be applied to the detection of Cu²⁺ concentration in the real environment.