A magnetically retrievable copper ionic liquid nanocatalyst for cyclooxidative synthesis of 2-phenylquinazolin-4(3H)-ones

Visible light-mediated synthesis of quinazolinones from benzyl bromides and 2-aminobenzamides without using any photocatalyst or additive

This paper reports a novel method for the visible-light-mediated synthesis of quinazolinones from the reaction of benzyl bromides with 2-aminobenzamides. The reaction proceeded efficiently at room temperature upon irradiation with an 18 W blue light-emitting diode in air without photocatalysts or additives. By varying the solvent type, substrate molar ratio, and reaction time, the optimal reaction conditions, including the use of methanol solvent, room temperature, and reaction time of 28 h, were identified. Under these conditions, various quinazolinones were obtained using 18 substrates, with the highest yield of 93%. To determine the industrial value of the proposed method, a scale-up reaction was performed and 80% product yield was achieved. Mechanistic studies revealed that the reaction likely proceeded via a radical pathway and that the hydrogen bromide by-product generated during the first step of the reaction of benzyl bromide with 2-aminobenzamide promoted the subsequent step.

Structural Regulation of Two Polyoxometalate-Based Metal-Organic Frameworks for the Heterogeneous Catalysis of Quinazolinones

Two dimeric {ε-Zn₄PMo₁₂}-based metal-organic frameworks (MOFs), [ε-PMo₈^VMo₄^VIO₃₄(OH)₆Zn₄][LO] (SDUT-21, LO = [5-((4'-carboxybenzyl)oxy)isophthalic acid]) and [TBA]₃[ε-PMo₈^VMo₄^VIO₃₇(OH)₃Zn₄][LN] (SDUT-22, TBA⁺ = tetrabutylammonium ion, LN = [5-((4-carboxybenzyl)imino)isophthalic acid]), combining the advantages of polyoxometalates (POMs) and MOFs, were synthesized by the one-pot assembly strategy. The dimeric {ε-Zn₄PMo₁₂} units act as nodes that are linked by the flexible ligands and extended into two- or three-dimensional frameworks. The cyclic voltammetry and proton conductivity measurements of SDUT-21 and SDUT-22 were performed and indicated the high electron and proton transfer abilities. These materials also e xhibited the catalytic performance for the synthesis of quinazolinones in the heterogeneous state, and the different binding capacities toward the substrates caused the catalytic activity of SDUT-21 to be higher than that of SDUT-22 under the same conditions. In addition, the used catalysts could be readily recovered for five successive cycles and maintained high catalytic efficiency.

Designing a new method for growing metal-organic framework (MOF) on MOF: synthesis, characterization and catalytic applications

Metal-organic frameworks as a unique class of high-surface-area materials have gained considerable attention due to their characteristic properties. In this perspective, herein, we report an eco-friendly and inexpensive route for the synthesis of 4(3H)-quinazolinones using magnetically separable core-shell-like bimetallic Fe₃O₄-MAA@Co-MOF@Cu-MOF NPs as environmentally-friendly heterogeneous catalysts. To the best of our knowledge, this is the first example of the integration of two different types of MOFs, which contain two different metal ions (Co²⁺ in the core and Cu²⁺ in the shell) using an external ligand. Our study not only introduces a novel nanostructured catalyst for the organic reaction but also presents a new strategy for the combination of two MOFs in one particle at the nanometer level. To survey the structural and compositional features of the synthesized nanocatalyst, a variety of spectroscopic and microscopic techniques including FT-IR, XRD, BET, TEM, HR-TEM, FE-SEM, EDX, EDX-mapping, TGA, VSM, and ICP-OES were employed. The combination of magnetic Co-MOF with Cu-MOF leads to achieving unique structural and compositional properties for Fe₃O₄-MAA@Co-MOF@Cu-MOF NPs with a particle size of 20-70 nm, mesostructure, and relatively large specific surface area (236.16 m² g^-1). The as-prepared nanostructured catalyst can be an excellent environment catalyst for the synthesis of a wide library of 4(3H)-quinazolinones derivatives, including electron-donating and electron-withdrawing aromatic, heteroaromatic, and aliphatic compounds under solvent-free conditions much better than the parent precursors. Moreover, by investigating the longevity of the nanocatalyst, the conclusion could be derived that the aforesaid nanocatalyst is stable under reaction conditions and could be recycled for at least seven recycle runs without a discernible decrease in its catalytic activity.

Magnetic Covalent Organic Frameworks-Fundamentals and Applications in Analytical Chemistry

Magnetic covalent organic frameworks are new emerging materials which, besides many other applications, have found unique applications in analytical chemistry as separating media and adsorbents. They have outstanding features such as special morphology, chemical and thermal stability, high adsorption capacity, good magnetic response, high specific surface area, uniform pore size distribution, strong π-π interactions with analytes and high reusability that makes reported studies on their properties and applications increased in the recent years. After discussing the methods of synthesis of MCOFs with different geometries that cause their special physic-chemical properties, this review focuses on their high potential which has been exhibited in various applications in extraction and pre-concentration of different analytes such as organic compounds, heavy metal ions and biological samples. The article also highlights the applications of magnetic covalent organic frameworks in other chemical analysis such as adsorbent and being used in sensors.

Synthesis of phenol esters by direct C–H activation of aldehydes using a highly efficient and reusable copper-immobilized polyimide covalent organic framework (Cu@PI-COF)

In the present study, we report the design and fabrication of a thermally and chemically stable copper-based polyimide covalent organic framework (Cu@PI-COF) via a facile and straightforward synthetic approach for the oxidative esterification of aldehydes.

A sustainable gateway to access 1,8-dioxo-octahydroxanthene scaffolds via a surface-engineered halloysite-based magnetically responsive catalyst

A covalently modified, surface-engineered Cu(ii)@DCH@CPTMS@MHNT nanocatalyst is synthesized, which showed incredible catalytic activity in accessing a library of xanthene scaffolds.

Selective Synthesis of 2-(1,2,3-Triazoyl) Quinazolinones through Copper-Catalyzed Multicomponent Reaction

We describe here our results from the copper-catalyzed three component reaction of 2-azidobenzaldehyde, anthranilamide and terminal alkynes, using Et3N as base, and DMSO as solvent. Depending on the temperature and amount of Et3N used in the reactions, 1,2,3-triazolyl-quinazolinones or 1,2,3-triazolyl-dihydroquinazolinone could be obtained. When the reactions were performed at 100 °C using 2 equivalents of Et3N, 1,2,3-triazolyl-dihydroquinazolinone was formed in 82% yield, whereas reactions carried out at 120 °C using 1 equivalent of Et3N provided 1,2,3-triazolyl-quinazolinones in moderate-to-good yields.