Integrated nucleic acid testing system to enable TB diagnosis in peripheral settings

A low-voltage alternant direct current electroporation chip for ultrafast releasing the genome DNA of Helicobacter pylori bacterium

Nucleic acid detection, as an important molecular diagnostic method, is widely used in bacterial identification, disease diagnosis. For detecting the nucleic acid of bacteria, the prerequisite is to release nucleic acids inside the bacteria. The common means to release nucleic acids is the chemical method, which involves complex processes, is time-consuming, and remains chemical inhibitors. Compared with chemical methods, electroporation as a physical method has the advantages of easy operation, short-time consumption, and chemical reagents free. However, the current works using electroporation often necessitates high-frequency or high-voltage conditions, entailing bulky power devices. Herein, we propose a low-voltage alternant direct current (LADC) electroporation chip and the corresponding miniature device for ultrafast releasing the genome DNA from Helicobacter pylori (H. pylori) for detection. We connected a micrometer-interdigital electrode in the chip with a 20 V portable battery to make the miniature device. Using this low-voltage device, our chip released genome DNA of H. pylori within only 5 ms, achieving a cell lysis rate of 99.5%. We further combined this chip with a colorimetric loop-mediated isothermal amplification assay to visually detect H. pylori within ~ 25 min at 10 CFU/μL. We detected 11 clinical samples using the chip, and the detection results were consistent with those of the clinical standard. The results indicate that the LADC electroporation chip is useful for ultrafast release of genome DNA from bacteria and is expected to promote the development of nucleic acid detection in POCT and other scenarios.

Chemical Trends in Sample Preparation for Nucleic Acid Amplification Testing (NAAT): A Review

Nucleic acid amplification testing facilitates the detection of disease through specific genomic sequences and is attractive for point-of-need testing (PONT); in particular, the early detection of microorganisms can alert early response systems to protect the public and ecosystems from widespread outbreaks of biological threats, including infectious diseases. Prior to nucleic acid amplification and detection, extensive sample preparation techniques are required to free nucleic acids and extract them from the sample matrix. Sample preparation is critical to maximize the sensitivity and reliability of testing. As the enzymatic amplification reactions can be sensitive to inhibitors from the sample, as well as from chemicals used for lysis and extraction, avoiding inhibition is a significant challenge, particularly when minimising liquid handling steps is also desirable for the translation of the assay to a portable format for PONT. The reagents used in sample preparation for nucleic acid testing, covering lysis and NA extraction (binding, washing, and elution), are reviewed with a focus on their suitability for use in PONT.

Rapid on-site nucleic acid testing: On-chip sample preparation, amplification, and detection, and their integration into all-in-one systems

As nucleic acid testing is playing a vital role in increasingly many research fields, the need for rapid on-site testing methods is also increasing. The test procedure often consists of three steps: Sample preparation, amplification, and detection. This review covers recent advances in on-chip methods for each of these three steps and explains the principles underlying related methods. The sample preparation process is further divided into cell lysis and nucleic acid purification, and methods for the integration of these two steps on a single chip are discussed. Under amplification, on-chip studies based on PCR and isothermal amplification are covered. Three isothermal amplification methods reported to have good resistance to PCR inhibitors are selected for discussion due to their potential for use in direct amplification. Chip designs and novel strategies employed to achieve rapid extraction/amplification with satisfactory efficiency are discussed. Four detection methods providing rapid responses (fluorescent, optical, and electrochemical detection methods, plus lateral flow assay) are evaluated for their potential in rapid on-site detection. In the final section, we discuss strategies to improve the speed of the entire procedure and to integrate all three steps onto a single chip; we also comment on recent advances, and on obstacles to reducing the cost of chip manufacture and achieving mass production. We conclude that future trends will focus on effective nucleic acid extraction via combined methods and direct amplification via isothermal methods.

A Multicomponent Nucleic Acid Enzyme-Cleavable Quantum Dot Nanobeacon for Highly Sensitive Diagnosis of Tuberculosis with the Naked Eye

Clinical tuberculosis (TB) screening and diagnosis are crucial for controlling the spread of this life-threatening infectious disease. In this work, a novel, rapid, and simple colorimetric detection platform for TB was developed based on a quantum dot-based nanobeacon (QD-NB) and multicomponent nucleic acid enzyme (MNAzyme). In the presence of target DNA (IS1081 gene fragment), the recombinase polymerase amplification (RPA) was performed and the amplicons were chemically DNA-denatured and then subjected to MNAzyme reaction. RNA-cleaving MNAzyme assembly included the recognition of target DNA and hybridization with a QD-NB fluorescence probe. Under the addition of Mg²⁺, the RNA-containing QD-NB as a cleavable substrate could be broken into two DNA fragments, leading to green fluorescence release due to their departure from a black hole quencher (BHQ2). The TB detection could be achieved with the naked eye under a portable and inexpensive UV flashlight. Our results demonstrated that QD-NB-based MNAzyme colorimetric assays improved the detection sensitivity by 1 order of magnitude compared with the detection using RPA. The limit of detection (LOD) of the visual reading was as low as 2 copies/μL (3.3 amol/L). Excellent specificity and reproducibility could also be achieved. Furthermore, the practical application of the colorimetric method for TB diagnosis was verified by 36 clinical TB patients and 20 healthy individuals. The developed QD-NB-based MNAzyme colorimetric assays provided a rapid, convenient, sensitive, and accurate alternative for clinical TB screening and diagnosis.

Flap Endonuclease-Induced Steric Hindrance Change Enables the Construction of Multiplex and Versatile Lateral Flow Strips for DNA Detection

A lateral flow strip (LFS) is an ideal tool for point-of-care testing (POCT), but traditional LFSs cannot be used for multiplex detection. Herein, a multiplex and versatile LFS based on flap endonuclease 1 (FEN1)-induced steric hindrance change (FISH-LFS) is proposed. In this method, multiplex PCR coupled with cascade invasive reactions was employed to yield single-stranded flaps, which were target-specific but independent of target sequences. Then, the amplicons were applied for FISH-LFS, and the single-stranded flaps would be efficiently captured by the complementary LFS-probes at different test lines. As flaps were cleaved from the specially designed hairpin probes, competition among flaps and hairpin probes would occur in capturing the probes at test lines. We enabled the hairpin probes to flow through the test lines while the flaps to stay at the test lines by making use of the difference in steric hindrance between hairpin probes and flaps. The assay is able to detect as low as two copies of blood pathogens (HBV, HCV, and HIV), to pick up as low as 0.1% mutants from wild-type gDNA, and to genotype 200 copies of SARS-CoV-2 variants α and β within 75 min at a conventional PCR engine. As the method is free of dye, a portable PCR engine could be used for a cost-effective multiplex detection on site. Results using an ultrafast mobile PCR system for FISH-LFS showed that as fast as 30 min was achieved for detecting three pathogens (HBV, HCV, and HIV) in blood, very suitable for POCT of pathogen screening. The method is convenient in operation, simple in instrumentation, specific in genotyping, and very easy in setting up multiplex POCT assays.

A finger-driven disposable micro-platform based on isothermal amplification for the application of multiplexed and point-of-care diagnosis of tuberculosis

Tuberculosis (TB) remains the high-risk infectious pathogen that caused global pandemic and high mortality, particularly in the areas lack in health resources. Clinical TB screening and diagnosis are so far mainly conducted on limited types of commercial platforms, which are expensive and require skilled personnel. In this work, we introduced a low-cost and portable finger-driven microfluidic chip (named Fd-MC) based on recombinase polymerase amplification (RPA) for rapid on-site detection of TB. After injection of the pre-treated sample solution, the pre-packaged buffer was driven by the pressure generated by the finger-actuated operation to accomplish sequential processes of diagnosis in a fully isolated microchannel. An in-situ fluorescence strategy based on FAM-probe was implemented for on-chip results read-out though a hand-held UV lamp. Hence, the Fd-MC proved unique advantageous for avoiding the risk of infection or environmental contamination. In addition, the Fd-MC was designed for multiplexed detection, which is able to not only identify TB/non-TB infection, but also differentiate between human Mycobacterium tuberculosis and Mycobacterium bovis. The platform was verified in 37 clinical samples, statistically with 100% specificity and 95.2% sensitivity as compared to commercial real-time RPA. Overall, the proposed platform eliminates the need on external pumps and skilled personnel, holding promise to POC testing in the resource-limited area.

Long and short non-coding RNA and radiation response: a review

Once thought of as arising from "junk DNA," noncoding RNAs (ncRNAs) have emerged as key molecules in cellular processes and response to stress. From diseases such as cancer, coronary artery disease, and diabetes to the effects of ionizing radiation (IR), ncRNAs play important roles in disease progression and as biomarkers of damage. Noncoding RNAs regulate cellular processes by competitively binding DNA, mRNA, proteins, and other ncRNAs. Through these interactions, specific ncRNAs can modulate the radiosensitivity of cells and serve as diagnostic and prognostic biomarkers of radiation damage, whether from incidental exposure in radiotherapy or in accidental exposure scenarios. Analysis of RNA expression after radiation exposure has shown alterations not only in mRNAs, but also in ncRNAs (primarily miRNA, circRNA, and lncRNA), implying an important role in cellular stress response. Due to their abundance and stability in serum and other biofluids, ncRNAs also have great potential as minimally invasive biomarkers with advantages over current biodosimetry methods. Several studies have examined changes in ncRNA expression profiles in response to IR and other forms of oxidative stress. Furthermore, some studies have reported modulation of radiosensitivity by altering expression levels of these ncRNAs. This review discusses the roles of ncRNAs in the radiation response and evaluates prior research on ncRNAs as biomarkers of radiation damage. Future directions and applications of ncRNAs in radiation research are introduced, including the potential for a clinical ncRNA assay for assessing radiation damage and for the therapeutic use of RNA interference (RNAi).