Phase transformation in tungsten oxide nanoplates as a function of post-annealing temperature and its electrochemical influence on energy storage

Strategic Synthesis of Mixed-Phase Tungsten Oxide for Electrochromic Smart Windows

Electrochromic devices based on mixed-phase WO3 can potentially outperform their pure-phase counterparts due to the optimized distribution of optically active sites that facilitate cation intercalation. In this work, we synthesized WO3 containing orthorhombic and hexagonal phases, with precise phase ratio control accomplished through a meticulously designed experimental strategy of optimizing the reaction time at low temperatures in a closed system under a hydrogen atmosphere. A detailed XRD analysis shows an optimal phase ratio (orthorhombic/hexagonal = 0.59), corresponding to a hexagonal content of 62.7% that demonstrated superior electrochromic performance. A fast Li+ ion diffusion (diffusion coefficient of 3.105 × 10-10 cm2/s) indicated more optically active sites for ion intercalation, enabling high transmission modulation of 52%, excellent coloration efficiency of 133 cm2/C, and fast switching in less than 2.7 s. The presence of phase junctions significantly enhanced the structural stability up to 5000 cycles. The mixed-phase configuration stabilized the structural deformation during Li-ion interaction and intercalation, likely contributing to improved reversibility and, consequently, increased stability of the electrode. The multifunctional characteristics were elucidated by establishing the relationship between optical modulation, the charge storage capability, and the heat-blocking ability of the best-performing electrochromic device. Additionally, the material's synthesis and device fabrication protocol employed in this work yields a scalable, cost-effective, and stable dual-functional device suitable for the construction of smart windows.

3D-engineered WO3 microspheres assembled by 2D nanosheets with superior sodium storage capacity

Because of the inadequate sodium storage capacity of graphite, the exploration of high-performance SIB anodes is a crucial step forward. Herein, we report the hydrothermally synthesized self-assembled interconnected nanosheets of WO3 microspheres possessing admirable sodium storage in terms of cycling stability and acceptable rate capability. Benefitting from the interconnected nature of the nanosheets with a hollow interior, the WO3 microspheres exhibited a high sodiation capacity of 431 mA h g-1 at 100 mA g-1 and an excellent rate performance of 60 mA h g-1 at 500 mA g-1 with an impressive coulombic efficiency of around 99%. Importantly, even after continuous cycling with increasing current densities, a specific capacity as high as 220 mA h g-1 could be recovered at a current density of 50 mA g-1, suggesting excellent sodium storage reversibility.

Synthesis and Capacitive Properties of Mesoporous Tungsten Oxide Films Prepared by Ultrasonic Spray Deposition

Mesoporous tungsten trioxide (WO3) films are prepared by the combination of the template-assisted sol-gel method and ultrasonic spraying deposition (USD) for supercapacitors, and then the surface morphology and electrochemical performance of the films are studied. Compared to WO3 prepared by the traditional hydrothermal synthesis and spin coating method, the films obtained by USD exhibit advantages such as low cost, minimal material usage, and suitability for large-area in-line manufacturing. Additionally, the mesoporous structure of USD-produced films is also supportive of ion transportation. Due to the high specific surface area of WO3 films deposited by USD, it is a material capable of use in a high-performance energy storage device. Through the control of spray coats, the film thickness and specific capacitance can be effectively controlled. Electrochemical measurements show that the mesoporous WO3 films possess excellent electrochemical performance with a maximum specific capacitance of 109.15 F/g at 0.5 A/g. The cycling performance up to 5000 cycles of mesoporous WO3 films is due to the stable nature of nanocrystalline produced by the combination of USD and sol-gel chemistry.

New Hybrid Adsorbents Based on Polyaniline and Polypyrrole with Silicon Dioxide: Synthesis, Characterization, Kinetics, Equilibrium, and Thermodynamic Studies for the Removal of 2,4-Dichlorophenol

In the current study, polyaniline and polypyrrole with silicon dioxide (PAni:PPy@SiO₂) were combined to formulate a new adsorbent, which was examined using XRD, TEM, SEM, FTIR, TGA, and BET, and the adsorption kinetics were investigated by UV-vis spectroscopy. The optical band gap was also evaluated. The electrochemical behavior was investigated using cyclic voltammograms. Moreover, experimental conditions were used to evaluate the 2,4-dichlorophenol (2,4-DCP) adsorption based on the pH, temperature, reaction time, and initial concentration. The analytical isotherm data were determined by Langmuir, Freundlich, Temkin, Sips, and Redlich-Peterson models. For the analysis of the kinetic data, the pseudo-first- and -second-order models and the intraparticle diffusion model were investigated. It was found that this new adsorbent possessed the highest adsorption efficiency after several regeneration cycles. Furthermore, the thermodynamic parameters of adsorption, such as entropy (ΔS), enthalpy (ΔH), and standard Gibbs were measured. These results suggest that the PAni:PPy backbone can generally be better applied for the elimination of 2,4-dichlorophenol by appropriately dispersing it over the surface of suitable SiO₂. This search provides a novel way to develop separable, high-performance adsorbents for adsorbing organic contamination from wastewater.

Enhanced Performance of WO3/SnO2 Nanocomposite Electrodes with Redox-Active Electrolytes for Supercapacitors

For effective supercapacitors, we developed a process involving chemical bath deposition, followed by electrochemical deposition and calcination, to produce WO₃/SnO₂ nanocomposite electrodes. In aqueous solutions, the hexagonal WO₃ microspheres were first chemically deposited on a carbon cloth, and then tin oxides were uniformly electrodeposited. The synthesized WO₃/SnO₂ nanocomposite was characterized by XRD, XPS, SEM, and EDX techniques. Electrochemical properties of the WO₃/SnO₂ nanocomposite were analyzed by cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy in an aqueous solution of Na₂SO₄ with/without the redox-active electrolyte K₃Fe(CN)₆. K₃Fe(CN)₆ exhibited a synergetic effect on the electrochemical performance of the WO₃/SnO₂ nanocomposite electrode, with a specific capacitance of 640 F/g at a scan rate of 5 mV/s, while that without K₃Fe(CN)₆ was 530 F/g. The WO₃/SnO₂ nanocomposite catalyzed the redox reactions of [Fe(CN)₆]³/[Fe(CN)₆]^4- ions, and the [Fe(CN)₆]^3-/[Fe(CN)₆]^4- ions also promoted redox reactions of the WO₃/SnO₂ nanocomposite. A symmetrical configuration of the nanocomposite electrodes provided good cycling stability (coulombic efficiency of 99.6% over 2000 cycles) and satisfied both energy density (60 Whkg^-1) and power density (540 Wkg^-1) requirements. Thus, the WO₃/SnO₂ nanocomposite prepared by this simple process is a promising component for a hybrid pseudocapacitor system with a redox-flow battery mechanism.

Computation and Investigation of Two-Dimensional WO3·H2O Nanoflowers for Electrochemical Studies of Energy Conversion and Storage Applications

The aim of this study is to prepare a two-dimensional (2D) WO3·H2O nanostructure assembly into a flower shape with good chemical stability for electrochemical studies of catalyst and energy storage applications. The 2D-WO3·H2O nanoflowers structure is created by a fast and simple process at room condition. This cost-effective and scalable technique to obtain 2D-WO3·H2O nanoflowers illustrates two attractive applications of electrochemical capacitor with an excellent energy density value of 25.33 W h kg-1 for high power density value of 1600 W kg-1 and good hydrogen evolution reaction results (low overpotential of 290 mV at a current density of 10 mA cm-2 with a low Tafel slope of 131 mV dec-1). A hydrogen evolution reaction (HER) study of WO3 in acidic media of 0.5 M H2SO4 and electrochemical capacitor (supercapacitors) in 1 M Na2SO4 aqueous electrolyte (three electrode system measurements) demonstrates highly desirable characteristics for practical applications. Our design for highly uniform 2D-WO3·H2O as catalyst material for HER and active material for electrochemical capacitor studies offers an excellent foundation for design and improvement of electrochemical catalyst based on 2D-transition metal oxide materials.

Application of Activated Carbon Adsorbents Prepared from Prickly Pear Fruit Seeds and a Conductive Polymer Matrix to Remove Congo Red from Aqueous Solutions

The present work was aimed to evaluate the adsorption properties of activated carbons based on prickly pear seeds (PPS) and conductive polymer matrix based on polyaniline (PANI) for the removal of anionic Congo red (CR) dye from aqueous solutions. The adsorbent was prepared by polymerization of aniline in the presence of activated PPS by phosphoric acid and sodium hydroxide. The samples were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and the Brunauer–Emmett–Teller (BET) methods. The adsorption kinetics were studied using UV-visible (UV/Vis) spectroscopy. The characterization data suggest that the adsorption of the Congo red dye is enhanced because PANI chain molecules, which are especially accountable for removal through π–π interaction and H–bonding with the CR, are adsorbed/tethered onto the acid-activated PPS (PPSH), and thus surmount the mass transfer limitation by being best exposed to the CR-adsorbed molecule. The adsorption kinetics follows the pseudo-second order process. The correlation coefficients (R2) for Langmuir, Freundlich and Tempkin showed that the adsorption values obey Freundlich and Tempkin isotherm models. Moreover, the isotherm was most accurately described by the Freundlich model, and the maximum removal percentage was calculated to be 91.14% under optimized conditions of pH 6.6, 1 g/L of adsorbent dosage, and an initial CR dye concentration of 20 mg·L−1. Importantly, the hybrid adsorbent exhibited the highest adsorption capacity (80.15%) after five cycles of the adsorption–desorption process. Thermodynamic parameters, such as entropy changes, enthalpy changes and Gibbs free energy, were also evaluated. These results indicated that the PANI matrix can generally be better utilized for the removal of Congo red dye when appropriately dispersed on the surface of suitable support materials. These results provide a new direction to promote the separable adsorbents with increasing performance for adsorption of dye impurities from wastewater.