1
|
Sun X, Jiang F. Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications. Carbohydr Polym 2024; 341:122305. [PMID: 38876711 DOI: 10.1016/j.carbpol.2024.122305] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/01/2024] [Revised: 05/14/2024] [Accepted: 05/20/2024] [Indexed: 06/16/2024]
Abstract
In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.
Collapse
Affiliation(s)
- Xia Sun
- Sustainable Functional Biomaterials Laboratory, Bioproducts Institute, Department of Wood Science, University of British Columbia, Vancouver, BC V6T 1Z4, Canada.
| | - Feng Jiang
- Sustainable Functional Biomaterials Laboratory, Bioproducts Institute, Department of Wood Science, University of British Columbia, Vancouver, BC V6T 1Z4, Canada.
| |
Collapse
|
2
|
Charlton-Sevcik AK, Collom C, Liu JY, Hsieh YL, Stark N, Ede JD, Shatkin JA, Sayes CM. The impact of surface functionalization of cellulose following simulated digestion and gastrointestinal cell-based model exposure. Int J Biol Macromol 2024; 271:132603. [PMID: 38788877 DOI: 10.1016/j.ijbiomac.2024.132603] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/16/2024] [Revised: 05/16/2024] [Accepted: 05/21/2024] [Indexed: 05/26/2024]
Abstract
Surface-functionalized cellulose materials are developed for various purposes, including food additives and food contact materials. A new biologically relevant testing strategy has been developed based on guidance from the European Food Safety Authority to demonstrate the safety of several next-generation surface-functionalized cellulose materials. This strategy involves a complex three-stage simulated digestion to compare the health effects of thirteen novel different types of cellulose. The physical and chemical properties of surface-functionalized fibrillated celluloses differed depending on the type, amount, and location of functional groups such as sulfonate, TEMPO-oxidized carboxy, and periodate-chlorite oxidized dicarboxylic acid celluloses. Despite exposure to gastrointestinal fluids, the celluloses maintained their physicochemical properties, such as negative surface charges and high length-to-width/thickness aspect ratios. An established intestinal co-culture model was used to measure cytotoxicity, barrier integrity, oxidative stress, and pro-inflammatory response to create a toxicological profile for these unique materials. We conclude that the C6 carboxylated cellulose nanofibrils by TEMPO-oxidation induced the most toxicity in the biological model used in this study and that the observed effects were most prominent at the 4-hour post-exposure time point.
Collapse
Affiliation(s)
- Amanda K Charlton-Sevcik
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA
| | - Clancy Collom
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA
| | - James Y Liu
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA
| | | | | | - James D Ede
- Vireo Advisors, LLC, Boston, MA 02130-4323, USA
| | | | - Christie M Sayes
- Department of Environmental Science, Baylor University, One Bear Place #97266, Waco, TX 76798-7266, USA.
| |
Collapse
|
3
|
Bajpai S, Nemade PR. Silane and fluorine free facile hydrophobicization of water hyacinth biomass for oil-water separations. CHEMOSPHERE 2024; 358:142164. [PMID: 38685326 DOI: 10.1016/j.chemosphere.2024.142164] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2023] [Revised: 11/21/2023] [Accepted: 04/25/2024] [Indexed: 05/02/2024]
Abstract
As the adverse effects of using plastics and perfluorinated alkyl substances become more apparent, there is a growing need for sustainable hydrophobic products. Cellulose and its derivatives are the most abundant and widely used polymers, and cellulose-based products have great potential in industries where plastics and other hydrophobic polymers are used, such as stain-resistant fabrics, food packaging, and oil-water separation applications. In this study, we extracted cellulose from water hyacinth (WH) biomass, known for its negative environmental impact, and converted it into hydrophobic cellulose. This addresses the issue of managing WH waste and creating an environmentally friendly hydrophobic material. Initially, aldehyde groups were introduced through oxidation with periodate, followed by direct octadecyl amine (ODA) grafting onto dialdehyde cellulose (DAC) via a Schiff base condensation. The resulting ODA modified cellulose (ODA-C) was dispersed in ethanol and used to coat various materials, including cotton fabric, cellulose filter paper, and packaging paper. The modified materials showed excellent hydrophobicity as measured by their water contact angles (WCAs), and the application of the coating was demonstrated for oil-water separation, stain-resistant hydrophobic fabric, and paper-based packaging materials. FTIR, XRD, and WCA analysis confirmed the successful modification of cellulose. A high separation efficiency of 99% was achieved for diesel/water separation using modified filter paper (MoFP), under gravity. On application of the coating, cotton fabric became hydrophobic and resisted staining from dye, and paper-based packaging materials became more robust by becoming water-resistant. Overall, the facile synthesis, low cost, high efficiency, and use of environmentally friendly sustainable materials make this a promising strategy for hydrophobically modifying surfaces for a wide range of applications while reducing the menace of water hyacinth.
Collapse
Affiliation(s)
- Shruti Bajpai
- Institute of Chemical Technology Mumbai, Marathwada Campus, Jalna, 431 203, India
| | - Parag R Nemade
- Institute of Chemical Technology Mumbai, Marathwada Campus, Jalna, 431 203, India; Department of Chemical Engineering, Institute of Chemical Technology, Mumbai, 400 019, India.
| |
Collapse
|
4
|
Guo M, Ede JD, Sayes CM, Shatkin JA, Stark N, Hsieh YL. Regioselectively Carboxylated Cellulose Nanofibril Models from Dissolving Pulp: C6 via TEMPO Oxidation and C2,C3 via Periodate-Chlorite Oxidation. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:479. [PMID: 38470807 DOI: 10.3390/nano14050479] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/10/2024] [Revised: 02/29/2024] [Accepted: 03/05/2024] [Indexed: 03/14/2024]
Abstract
Regioselective C6 and C2,C3 carboxylated cellulose nanofibrils (CNFs) have been robustly generated from dissolving pulp, a readily available source of unmodified cellulose, via stoichiometrically optimized 2,2,6,6-tetramethylpyperidine-1-oxyl (TEMPO)-mediated and sequential sodium periodate-sodium chlorite (PC) oxidation coupled with high-speed blending. Both regioselectively optimized carboxylated CNF series possess the widest ranges of comparable charges (0.72-1.48 mmol/g for T-CNFs vs. 0.72-1.10 mmol/g for PC-CNFs), but similar ranges of thickness (1.3-2.4 nm for T-CNF, 1.8-2.7 nm PC-CNF), widths (4.6-6.6 nm T-CNF, 5.5-5.9 nm PC-CNF), and lengths (254-481 nm T-CNF, 247-442 nm PC-CNF). TEMPO-mediated oxidation is milder and one-pot, thus more time and process efficient, whereas the sequential periodate-chlorite oxidation produces C2,C3 dialdehyde intermediates that are amenable to further chemical functionalization or post-reactions. These two well-characterized regioselectively carboxylated CNF series represent coherent cellulose nanomaterial models from a single woody source and have served as references for their safety study toward the development of a safer-by-design substance evaluation tool.
Collapse
Affiliation(s)
- Mengzhe Guo
- Chemical Engineering, University of California at Davis, Davis, CA 95616, USA
| | - James D Ede
- Vireo Advisors, LLC, P.O. Box 51368, Boston, MA 02130, USA
| | | | | | - Nicole Stark
- USDA Forest Service, Forest Products Laboratory, Madison, WI 53726, USA
| | - You-Lo Hsieh
- Biological and Agricultural Engineering, Chemical Engineering, University of California at Davis, Davis, CA 95616, USA
| |
Collapse
|
5
|
Xu G, Onyianta AJ, Eloi JC, Harniman RL, Laverock J, Bond I, Diejomaoh OA, Koev TT, Khimyak YZ, Eichhorn SJ. Self-Healing Composite Coating Fabricated with a Cystamine Cross-Linked Cellulose Nanocrystal-Stabilized Pickering Emulsion. Biomacromolecules 2024; 25:715-728. [PMID: 38271957 PMCID: PMC10865351 DOI: 10.1021/acs.biomac.3c00915] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2023] [Revised: 01/09/2024] [Accepted: 01/09/2024] [Indexed: 01/27/2024]
Abstract
A gelled Pickering emulsion system was fabricated by first stabilizing linseed oil droplets in water with dialdehyde cellulose nanocrystals (DACNCs) and then cross-linking with cystamine. Cross-linking of the DACNCs was shown to occur by a reaction between the amine groups on cystamine and the aldehyde groups on the CNCs, causing gelation of the nanocellulose suspension. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the cystamine-cross-linked CNCs (cysCNCs), demonstrating their presence. Transmission electron microscopy images evidenced that cross-linking between cysCNCs took place. This cross-linking was utilized in a linseed oil-in-water Pickering emulsion system, creating a novel gelled Pickering emulsion system. The rheological properties of both DACNC suspensions and nanocellulose-stabilized Pickering emulsions were monitored during the cross-linking reaction. Dynamic light scattering and confocal laser scanning microscopy (CLSM) of the Pickering emulsion before gelling imaged CNC-stabilized oil droplets along with isolated CNC rods and CNC clusters, which had not been adsorbed to the oil droplet surfaces. Atomic force microscopy imaging of the air-dried gelled Pickering emulsion also demonstrated the presence of free CNCs alongside the oil droplets and the cross-linked CNC network directly at the oil-water interface on the oil droplet surfaces. Finally, these gelled Pickering emulsions were mixed with poly(vinyl alcohol) solutions and fabricated into self-healing composite coating systems. These self-healing composite coatings were then scratched and viewed under both an optical microscope and a scanning electron microscope before and after self-healing. The linseed oil was demonstrated to leak into the scratches, healing the gap automatically and giving a practical approach for a variety of potential applications.
Collapse
Affiliation(s)
- Guofan Xu
- Bristol
Composites Institute, School of Civil, Aerospace and Design Engineering
(CADE), University of Bristol, University
Walk, Bristol BS8 1TR, U.K.
| | - Amaka J. Onyianta
- Bristol
Composites Institute, School of Civil, Aerospace and Design Engineering
(CADE), University of Bristol, University
Walk, Bristol BS8 1TR, U.K.
| | | | | | - Jude Laverock
- School
of Chemistry, University of Bristol, Bristol BS8 1TS, U.K.
| | - Ian Bond
- Bristol
Composites Institute, School of Civil, Aerospace and Design Engineering
(CADE), University of Bristol, University
Walk, Bristol BS8 1TR, U.K.
| | - Onajite Abafe Diejomaoh
- Bristol
Composites Institute, School of Civil, Aerospace and Design Engineering
(CADE), University of Bristol, University
Walk, Bristol BS8 1TR, U.K.
| | - Todor T. Koev
- School
of Pharmacy, University of East Anglia, Norwich Research Park NR4 7TJ, U.K.
| | - Yaroslav Z. Khimyak
- School
of Pharmacy, University of East Anglia, Norwich Research Park NR4 7TJ, U.K.
| | - Stephen J. Eichhorn
- Bristol
Composites Institute, School of Civil, Aerospace and Design Engineering
(CADE), University of Bristol, University
Walk, Bristol BS8 1TR, U.K.
| |
Collapse
|
6
|
Yang J, Kim H, Sung M, Cho I, Kim JW. High Internal Phase Emulsion Stabilization through Restricted Interdrop Fusion across Water Drainage Channels. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:5670-5678. [PMID: 37053540 DOI: 10.1021/acs.langmuir.2c03190] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
This study introduces a promising approach to stabilize high internal phase emulsions (HIPEs) in which droplets are enveloped by octadecane (C18)-grafted bacterial cellulose nanofibers (BCNFdiC18), which are mainly surrounded by carboxylate anions and hydrophobically modified with C18 alkyl chains. For this purpose, BCNFdiC18, in which two octadecyl chains were grafted onto each of several cellulose unit rings on 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidized BCNFs, was fabricated using the Schiff base reaction. The wettability of BCNFdiC18 was adjusted by controlling the amount of the grafted C18 alkyl chain. Interfacial rheological analysis revealed that BCNFdiC18 enhanced the membrane modulus at the oil-water interface. We figured out that such a resilient interfacial membrane substantially prevented interdrop fusion across the water drainage channel formed between the jammed oil droplets, which was confirmed theoretically using the modified Stefan-Reynolds equation. These findings highlight that the use of surfactants in the form of nanofibers to form a rigid interfacial film plays a key role in hindering the interfusion of the internal phase and the collapse of the emulsion, which is essential for HIPE stabilization.
Collapse
Affiliation(s)
- Jongryeol Yang
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Hajeong Kim
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Minchul Sung
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Inje Cho
- HINATURE Inc., Incheon 21984, Republic of Korea
| | - Jin Woong Kim
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| |
Collapse
|
7
|
Patterson GD, McManus JD, Orts WJ, Hsieh YL. Protonation of Surface Carboxyls on Rice Straw Cellulose Nanofibrils: Effect on the Aerogel Structure, Modulus, Strength, and Wet Resiliency. Biomacromolecules 2023; 24:2052-2062. [PMID: 37040473 PMCID: PMC10170510 DOI: 10.1021/acs.biomac.2c01478] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/13/2023]
Abstract
Rice straw cellulose nanofibrils from the optimal 2,2,6,6-tetramethylpiperidine-1-oxyl oxidation/blending process carrying 1.17 mmol/g surface carboxyls were protonated to varying charged (COO-Na+) and uncharged (COOH) surfaces. Reducing the electrostatic repulsion of surface charges by protonation with hydrochloric acid from 11 to 45 and 100% surface carboxylic acid most prominently reduced the aerogel densities from 8.0 to 6.6 and 5.2 mg/cm3 while increasing the mostly open cell pore volumes from 125 to 152 and 196 mL/g. Irrespective of charge levels, all aerogels were amphiphilic, super-absorptive, stable at pH 2 for up to 30 days, and resilient for up to 10 repetitive squeezing-absorption cycles. While these aerogels exhibited density-dependent dry [11.3 to 1.5 kPa/(mg/cm3)] and reduced wet [3.3 to 1.4 kPa/(mg/cm3)] moduli, the absorption of organic liquids stiffened the saturated aerogels. These data support protonation as a critical yet simple approach toward precise control of aerogels' dry and wet properties.
Collapse
Affiliation(s)
- Gabriel D Patterson
- Bioproducts Research Unit, WRRC, ARS-USDA, Albany, California 94710, United States
- Biological and Agricultural Engineering, University of California, Davis, California 95616, United States
| | - James D McManus
- Bioproducts Research Unit, WRRC, ARS-USDA, Albany, California 94710, United States
| | - William J Orts
- Bioproducts Research Unit, WRRC, ARS-USDA, Albany, California 94710, United States
| | - You-Lo Hsieh
- Biological and Agricultural Engineering, University of California, Davis, California 95616, United States
| |
Collapse
|
8
|
He H, Teng H, An F, Wang Y, Qiu R, Chen L, Song H. Nanocelluloses review: Preparation, biological properties, safety, and applications in the food field. FOOD FRONTIERS 2023. [DOI: 10.1002/fft2.208] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023] Open
Affiliation(s)
- Hong He
- College of Food Science Fujian Agriculture and Forestry University Fuzhou Fujian China
- Fujian Provincial Key Laboratory of Quality Science and Processing Technology in Special Starch Fuzhou Fujian China
| | - Hui Teng
- College of Food Science and Technology Guangdong Ocean University Zhanjiang China
| | - Fengping An
- College of Food Science Fujian Agriculture and Forestry University Fuzhou Fujian China
- Fujian Provincial Key Laboratory of Quality Science and Processing Technology in Special Starch Fuzhou Fujian China
| | - Yiwei Wang
- College of Food Science Fujian Agriculture and Forestry University Fuzhou Fujian China
| | - Renhui Qiu
- College of Material Engineering Fujian Agriculture and Forestry University Fuzhou China
| | - Lei Chen
- College of Food Science and Technology Guangdong Ocean University Zhanjiang China
| | - Hongbo Song
- College of Food Science Fujian Agriculture and Forestry University Fuzhou Fujian China
- Fujian Provincial Key Laboratory of Quality Science and Processing Technology in Special Starch Fuzhou Fujian China
| |
Collapse
|
9
|
Sen S, Singh A, Kailasam K, Bera C, Roy S. Biomass-derived cellulose nanofibers and iron oxide-based nanohybrids for thermal insulation application. NANOSCALE ADVANCES 2022; 4:3381-3390. [PMID: 36131706 PMCID: PMC9417942 DOI: 10.1039/d2na00010e] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/04/2022] [Accepted: 05/09/2022] [Indexed: 05/02/2023]
Abstract
In recent years, due to high energy consumption in the building sector and subsequent environmental issues, environment-friendly and cost-effective thermally insulating materials are in high demand to improve the energy efficiency of buildings. Current commercially available thermal insulating materials (polystyrene) always pose a challenge due to their non-biodegradability and poor insulating performance. To this end, biomass-derived aerogels are attracting significant interest as renewable and sustainable insulating materials. In this work, we have developed a facile strategy for synthesizing cellulose nanofibers from biomass-derived wood pulp as a cost-effective starting material by TEMPO-oxidation, and further incorporating iron oxide nanoparticles to make a nanohybrid. Interestingly, in these nanohybrids, the functional attributes like mechanical strength and flammability were improved to a great extent and thus overcoming the limitations of the commercially available thermal insulating materials in terms of their stability and durability. Most importantly, these nanohybrids demonstrated very low thermal conductivity, as low as 0.024 W m-1 K-1, indicating the better insulating potential of these nanohybrids as compared to other conventional insulating materials.
Collapse
Affiliation(s)
- Sourav Sen
- Institute of Nano Science and Technology Mohali Knowledge City, Sector-81 Mohali-140306 Punjab India
| | - Ajit Singh
- Institute of Nano Science and Technology Mohali Knowledge City, Sector-81 Mohali-140306 Punjab India
| | - Kamalakannan Kailasam
- Institute of Nano Science and Technology Mohali Knowledge City, Sector-81 Mohali-140306 Punjab India
| | - Chandan Bera
- Institute of Nano Science and Technology Mohali Knowledge City, Sector-81 Mohali-140306 Punjab India
| | - Sangita Roy
- Institute of Nano Science and Technology Mohali Knowledge City, Sector-81 Mohali-140306 Punjab India
| |
Collapse
|
10
|
Duceac IA, Tanasa F, Coseri S. Selective Oxidation of Cellulose-A Multitask Platform with Significant Environmental Impact. MATERIALS (BASEL, SWITZERLAND) 2022; 15:5076. [PMID: 35888547 PMCID: PMC9324530 DOI: 10.3390/ma15145076] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/23/2022] [Revised: 06/30/2022] [Accepted: 07/02/2022] [Indexed: 02/07/2023]
Abstract
Raw cellulose, or even agro-industrial waste, have been extensively used for environmental applications, namely industrial water decontamination, due to their effectiveness, availability, and low production cost. This was a response to the increasing societal demand for fresh water, which made the purification of wastewater one of the major research issue for both academic and industrial R&D communities. Cellulose has undergone various derivatization reactions in order to change the cellulose surface charge density, a prerequisite condition to delaminate fibers down to nanometric fibrils through a low-energy process, and to obtain products with various structures and properties able to undergo further processing. Selective oxidation of cellulose, one of the most important methods of chemical modification, turned out to be a multitask platform to obtain new high-performance, versatile, cellulose-based materials, with many other applications aside from the environmental ones: in biomedical engineering and healthcare, energy storage, barrier and sensing applications, food packaging, etc. Various methods of selective oxidation have been studied, but among these, (2,2,6,6-tetramethylpiperidin-1-yl)oxyl) (TEMPO)-mediated and periodate oxidation reactions have attracted more interest due to their enhanced regioselectivity, high yield and degree of substitution, mild conditions, and the possibility to further process the selectively oxidized cellulose into new materials with more complex formulations. This study systematically presents the main methods commonly used for the selective oxidation of cellulose and provides a survey of the most recent reports on the environmental applications of oxidized cellulose, such as the removal of heavy metals, dyes, and other organic pollutants from the wastewater.
Collapse
Affiliation(s)
| | - Fulga Tanasa
- Department of Polyaddition and Photochemistry, “Petru Poni” Institute of Macromolecular Chemistry, 700487 Iasi, Romania; (I.A.D.); (S.C.)
| | | |
Collapse
|
11
|
Alle M, Bandi R, Sharma G, Dadigala R, Lee SH, Kim JC. Gold nanoparticles spontaneously grown on cellulose nanofibrils as a reusable nanozyme for colorimetric detection of cholesterol in human serum. Int J Biol Macromol 2022; 201:686-697. [PMID: 35104471 DOI: 10.1016/j.ijbiomac.2022.01.158] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2021] [Revised: 01/17/2022] [Accepted: 01/26/2022] [Indexed: 12/14/2022]
Abstract
Recently, gold nanoparticles (AuNPs) are extensively used as peroxidase mimics. However, low catalytic activity, high synthesis cost, substrate-induced aggregation in reaction medium and difficulty in recovery and reuse still remain as major challenges. Here, a novel, simple, spontaneous, and reagent-less in-situ method for the production of AuNPs using dialdehyde cellulose nanofibrils (DACNF) is proposed. AuNPs synthesis time and size were greatly influenced by aldehyde content and the optimal aldehyde content for ultra-small AuNPs (≈10 nm) was 2.1 mM/g. AuNPs@DACNFs exhibited broad-spectrum peroxidase activity and steady-state kinetics revealed their better kinetic parameters (low Km and high Vmax) over horseradish peroxidase (HRP). AuNPs@DACNFs was further converted into paper strip, which served as a biosensor for H2O2 and cholesterol detection. The proposed method exhibited wide linear response in the range of 10-90 μM and 0.05-0.45 mM, and detection limit of 0.39 μM and 1.9 μM for H2O2 and cholesterol, respectively. Great shelf life and reusability were evident by FE-SEM and ICP-OES analysis. The smartphone application "Color Grab" was used to enable the portable onsite detection. The results of cholesterol detection in human serum samples were in agreement with clinically observed values, suggesting the great potential of the probe in disease diagnosis.
Collapse
Affiliation(s)
- Madhusudhan Alle
- Institute of Forest Science, Kangwon National University, Chuncheon 24341, Republic of Korea
| | - Rajkumar Bandi
- Institute of Forest Science, Kangwon National University, Chuncheon 24341, Republic of Korea
| | - Garima Sharma
- Department of Biomedical Science & Institute of Bioscience and Biotechnology, Kangwon National University, Chuncheon 24341, Republic of Korea
| | - Ramakrishna Dadigala
- Institute of Forest Science, Kangwon National University, Chuncheon 24341, Republic of Korea
| | - Seung-Hwan Lee
- Institute of Forest Science, Kangwon National University, Chuncheon 24341, Republic of Korea; Department of Forest Biomaterials Engineering, College of Forest and Environmental Sciences, Kangwon National University, Chuncheon 24341, Republic of Korea.
| | - Jin-Chul Kim
- Department of Biomedical Science & Institute of Bioscience and Biotechnology, Kangwon National University, Chuncheon 24341, Republic of Korea.
| |
Collapse
|
12
|
Sun X, Xue Y, Li J, Yang Y, Bai Y, Chen Y. Fluorescent labeling and characterization of dicarboxylic cellulose nanocrystals prepared by sequential periodate-chlorite oxidation. RSC Adv 2021; 11:24694-24701. [PMID: 35481032 PMCID: PMC9036875 DOI: 10.1039/d1ra04812k] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2021] [Accepted: 07/08/2021] [Indexed: 12/19/2022] Open
Abstract
High-performance fluorescent composites are key to the development and improvement of fluorescent molecular probe technology. In this study, cellulose nanocrystals (CNC) with high carboxyl concentrations were prepared via sequential periodate-chlorite oxidation. Then, fluorescent cellulose nanocrystals (FCNC) were prepared by attaching 7-amino-4-methylcoumarin (AMC) onto CNC under 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) catalysis. The morphology and fluorescence properties of FCNC were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, elemental analysis, ultraviolet-visible absorbance, fluorescence spectrophotometry, and fluorescence spectroscopy. The results showed that AMC was grafted onto the CNC surface by an amidation reaction, and the absorption and emission maxima for FCNC were blue-shifted from 350 nm and 445 nm of AMC to 335 nm and 440 nm, respectively. FCNC retained the crystallinity and nano-topography size of the CNC. The fluorescence intensity, quantum yield, and fluorescence lifetime of FCNC showed the same change law; it first increased and then decreased with an increase in the graft density of AMC from 0.201 to 0.453 AMC molecules per nm2. The FCNC prepared in this study have good optical properties and can be used in the fields of fluorescent molecular probes and biological imaging.
Collapse
Affiliation(s)
- Xiaozheng Sun
- College of Engineering, Northeast Agricultural University No. 600 Changjiang Street HarBin 150030 China
| | - Yanhua Xue
- College of Engineering, Northeast Agricultural University No. 600 Changjiang Street HarBin 150030 China
| | - Jianye Li
- College of Engineering, Northeast Agricultural University No. 600 Changjiang Street HarBin 150030 China
| | - Yu Yang
- College of Engineering, Northeast Agricultural University No. 600 Changjiang Street HarBin 150030 China
| | - Yu Bai
- College of Engineering, Northeast Agricultural University No. 600 Changjiang Street HarBin 150030 China
| | - Yujia Chen
- College of Engineering, Northeast Agricultural University No. 600 Changjiang Street HarBin 150030 China
| |
Collapse
|
13
|
Keller JG, Wiemann M, Gröters S, Werle K, Vennemann A, Landsiedel R, Wohlleben W. Aerogels are not regulated as nanomaterials, but can be assessed by tiered testing and grouping strategies for nanomaterials. NANOSCALE ADVANCES 2021; 3:3881-3893. [PMID: 36133012 PMCID: PMC9419173 DOI: 10.1039/d1na00044f] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/18/2021] [Accepted: 05/16/2021] [Indexed: 06/16/2023]
Abstract
Aerogels contribute to an increasing number of novel applications due to many unique properties, such as high porosity and low density. They outperform most other insulation materials, and some are also useful as carriers in food or pharma applications. Aerogels are not nanomaterials by the REACH definition but retain properties of nanoscale structures. Here we applied a testing strategy in three tiers. In Tier 1, we examined a panel of 19 aerogels (functionalized chitosan, alginate, pyrolyzed carbon, silicate, cellulose, polyurethane) for their biosolubility, and oxidative potential. Biosolubility was very limited except for some alginate and silicate aerogels. Oxidative potential, as by the ferric reduction ability of human serum (FRAS), was very low except for one chitosan and pyrolyzed carbon, both of which were <10% of the positive control Mn2O3. Five aerogels were further subjected to the Tier 2 alveolar macrophage assay, which revealed no in vitro cytotoxicity, except for silicate and polyurethane that induced increases in tumor necrosis factor α. Insufficiently similar aerogels were excluded from a candidate group, and a worst case identified. In the Tier 3 in vivo instillation, polyurethane (0.3 to 2.4 mg) elicited dose-dependent but reversible enzyme changes in lung lavage fluid on day 3, but no significant inflammatory effects. Overall, the results show a very low inherent toxicity of aerogels and support a categorization based on similarities in Tier 1 and Tier 2. This exemplifies how nanosafety concepts and methods developed on particles can be applied to specific concerns on advanced materials that contain or release nanostructures.
Collapse
Affiliation(s)
- Johannes G Keller
- BASF SE, Dept. Experimental Toxicology and Ecology, Dept. Material Physics 67056 Ludwigshafen Germany
| | - Martin Wiemann
- IBE R&D Institute for Lung Health, gGmbH Münster Germany
| | - Sibylle Gröters
- BASF SE, Dept. Experimental Toxicology and Ecology, Dept. Material Physics 67056 Ludwigshafen Germany
| | - Kai Werle
- BASF SE, Dept. Experimental Toxicology and Ecology, Dept. Material Physics 67056 Ludwigshafen Germany
| | | | - Robert Landsiedel
- BASF SE, Dept. Experimental Toxicology and Ecology, Dept. Material Physics 67056 Ludwigshafen Germany
| | - Wendel Wohlleben
- BASF SE, Dept. Experimental Toxicology and Ecology, Dept. Material Physics 67056 Ludwigshafen Germany
| |
Collapse
|