A Figure of Merit for Fast-Charging Li-ion Battery Materials

Rate capability is characterized necessarily in almost all battery-related reports, while there is no universal metric for quantitative comparison. Here, we proposed the characteristic time of diffusion, which mainly combines the effects of diffusion coefficients and geometric sizes, as an easy-to-use figure of merit (FOM) to standardize the comparison of fast-charging battery materials. It offers an indicator to rank the rate capabilities of different battery materials and suggests two general methods to improve the rate capability: decreasing the geometric sizes or increasing the diffusion coefficients. Based on this FOM, more comprehensive FOMs for quantifying the rate capabilities of battery materials are expected by incorporating other processes (interfacial reaction, migration) into the current diffusion-dominated electrochemical model. Combined with Peukert's empirical law, it may characterize rate capabilities of batteries in the future.

Screening LiMn2O4 Surface Modification Schemes under Theoretical Guidance

Mn dissolution is one of the most important factors for the failure of LiMn₂O₄ batteries. Doping has been widely adopted in the modification of LiMn₂O₄ cathodes; however, there is still a lack of theoretical guidance on screening the dopants. Here, through first-principles calculations, we systematically investigated the effects of all 3, 4d transition metals as well as Mg, Ca, Sr, Al, Ga, and In on the surface oxygen stability of LiMn₂O₄ cathodes, which has been proved to be correlated with the stability of the surface Mn atoms. Six competitive dopants, namely Nb, Ru, Mo, V, Tc, and Ti, were screened out. Besides, for three dopants in low valence states (Mg, Cu, and Zn), their Li-site doping can more effectively stabilize the surface oxygen atoms compared with Mn-site doping. Finally, we synthesized LiMn₂O₄ samples with Mg, Mo, and Nb surface doping to validate the rationality of the computational results. We found that particle morphology should also be considered in addition to surface oxygen stability for controlling Mn dissolution. Moreover, the electrochemical performance of LiMn₂O₄ batteries is a more complex issue and cannot be solely regulated by Mn dissolution. During the experiments, we have explored novel efficient binary chromogenic reagents for ultraviolet-visible spectroscopy analysis that can be used for rapid and low-cost Mn dissolution detection. This work provides a paradigm for the systematic design of the surface modification of the LiMn₂O₄ cathode under theoretical guidance.

A nano-truncated Ni/La doped manganese spinel material for high rate performance and long cycle life lithium-ion batteries

A nano-truncated octahedral LiNi0.08La0.01Mn1.91O4 cathode material with {111} and {100} crystal planes achieves capacity retention of 89.0% after 1000 cycles at 10C.

Understanding the Effect of Al Doping on the Electrochemical Performance Improvement of the LiMn2O4 Cathode Material

It is well known that the electrochemical performance of spinel LiMn₂O₄ can be improved by Al doping. Herein, combining X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and spherical aberration-corrected scanning transmission electron microscopy (Cs-STEM) with in situ electron-beam (E-beam) irradiation techniques, the influence of Al doping on the structural evolution and stability improvement of the LiMn₂O₄ cathode material is revealed. It is revealed that an appropriate concentration of Al³⁺ ions could dope into the spinel structure to form a more stable LiAl_xMn_2-xO₄ phase framework, which can effectively stabilize the surface and bulk structure by inhibiting the dissolution of Mn ions during cycling. The optimized LiAl_0.05Mn_1.95O₄ sample exhibits a superior capacity retention ratio of 80% after 1000 cycles at 10 C (1 C = 148 mA h g^-1) in the voltage range of 3.0-4.5 V, which possesses an initial discharge capacity of 90.3 mA h g^-1. Compared with the undoped LiMn₂O₄ sample, the Al-doped sample also shows superior rate performance, especially the capacity recovery performance.

Effects of crystal structure and plane orientation on lithium and nickel co-doped spinel lithium manganese oxide for long cycle life lithium-ion batteries

Various Li-rich spinel Li_1+xNi_0.05Mn_1.95-xO₄ (0 ≤ x ≤ 0.10) cathode materials with a truncated octahedron were synthesized by a solution combustion method. The relationship of crystalline structure, particles morphology and electrochemical properties of the as-prepared samples was investigated via a series of physicochemical characterizations. The Li-Ni co-doping changes the lattice parameters and atomic configuration, whilst resulting in a contraction of unit cell dimension and giving rise to a variation of bond length. In this regard, the shrinkage of octahedral MnO₆ provides a robust structure and the expansion of tetrahedral LiO₄ facilitates a fast electrochemical process. Additionally, the resulted polyhedral Li_1+xNi_0.05Mn_1.95-xO₄ samples present the exposed (110), (100), and (111) crystal planes, which provide the favorable Li⁺ ions diffusion/transmission channel and alleviate Mn dissolution. Owing to these merits of polyhedral structure and Li-Ni co-doping, the optimized Li_1.02Ni_0.05Mn_1.93O₄ exhibits good electrochemical performance with high initial discharge capacity of 119.8, 107.1 and 97.9 mAh·g^-1 at 1, 5 and 10 C, respectively. Even at a high current rate of 15 C, an excellent capacity retention of 91.7% is obtained after 1000 cycles, whilst the high temperature performance was also improved.