Bifunctional In-MOFs for Selective and Sensitive Detection of Trace Nitrobenzene Compounds in Water and Possessing High Proton Conductivity

With the escalating prevalence of terrorism and global environmental pollution, nitroaromatic compounds (NACs) have increasingly come into focus as the primary culprit. To counter these challenges, it is imperative to develop simple and efficient methods for detecting NACs. Considering the electron-deficient structure of NAC molecules, this paper constructed a novel three-dimensional In-MOF with permanent porosity using electron-rich organic molecules 4'-[1,2,2-tris(3',5'-dicarboxy[1,1'-biphenyl]-4-yl)ethenyl]-[1,1'-biphenyl]-3,5-dicarboxylic acid (H8ETTB) for fluorescence detection by photoinduced electron transfer. The results indicated that In-ETTB can sensitively detect trace NACs in water. In-ETTB exhibited the best detection performance for 3-NP, achieving a Ksv value of 8.75 × 104 M-1 with a limit of detection of 0.27 μΜ in aqueous solution; this belongs to a relatively high level among the reported metal organic framework (MOF) materials. Subsequently, anti-interference experiments revealed that In-ETTB exhibits strong specificity fluorescence recognition of NACs, and it could still maintain its structural integrity and fluorescence emission intensity even after 7 cycles of testing. We confirmed that the fluorescence detection of NACs was due to a combined effect of competitive absorption and photoinduced electron transfer through experimental collaboration DFT calculations in detail. Meanwhile, the proton conductivity reached 2.45 × 10-2 S·cm-1 at 98% relative humidity and 90 °C, which is also a high level in MOFs. This work provides a universal method theoretical basis for designing NAC detectors with practical application prospects.

Four Lanthanide(III) Metal-Organic Frameworks Fabricated by Bithiophene Dicarboxylate for High Inherent Proton Conduction

Currently, it is still a challenge to directly achieve highly stable metal-organic frameworks (MOFs) with superior proton conductivity solely through the exquisite design of ligands and the attentive selection of metal nodes. Inspired by this, we are intrigued by a multifunctional dicarboxylate ligand including dithiophene groups, 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylic acid (H2DTD), and lanthanide ions with distinct coordination topologies. Successfully, four isostructural three-dimensional lanthanide(III)-based MOFs, [Ln2(DTD)3(DEF)4]·DEF·6H2O [LnIII = TbIII (Tb-MOF), EuIII (Eu-MOF), SmIII (Sm-MOF), and DyIII (Dy-MOF)], were solvothermally prepared, in which the effective proton transport will be provided by the coordinated or free solvent molecules, the crystalline water molecules, and the framework components, as well as a large number of highly electronegative S and O atoms. As expected, the four Ln-MOFs demonstrated the highest proton conductivities (σ) being 0.54 × 10-3, 3.75 × 10-3, 1.28 × 10-3, and 1.92 × 10-3 S·cm-1 for the four MOFs, respectively, at 100 °C/98% relative humidity (RH). Excitingly, Dy-MOF demonstrated an extraordinary ultrahigh σ of 1 × 10-3 S·cm-1 at 30 °C/98% RH. Additionally, the plausible proton transport mechanisms were emphasized.

HOFs Built from Hexatopic Carboxylic Acids: Structure, Porosity, Stability, and Photophysics

Hydrogen-bonded organic frameworks (HOFs) have attracted renewed attention as another type of promising candidates for functional porous materials. In most cases of HOF preparation, the applied molecular design principle is based on molecules with rigid π-conjugated skeleton together with more than three H-bonding groups to achieve 2D- or 3D-networked structures. However, the design principle does not always work, but results in formation of unexpected structures, where subtle structural factors of which we are not aware dictate the entire structure of HOFs. In this contribution, we assess recent advances in HOFs, focusing on those composed of hexatopic building block molecules, which can provide robust frameworks with a wide range of topologies and properties. The HOFs described in this work are classified into three types, depending on their H-bonded structural motifs. Here in, we focus on: (1) the chemical aspects that govern their unique fundamental chemistry and structures; and (2) their photophysics at the ensemble and single-crystal levels. The work addresses and discusses how these aspects affect and orient their photonic applicability. We trust that this contribution will provide a deep awareness and will help scientists to build up a systematic series of porous materials with the aim to control both their structural and photodynamical assets.

Multiple Strategies to Fabricate a Highly Stable 2D CuIICuI-Organic Framework with High Proton Conductivity

Using multifunctional organic ligands with multiple acidic groups (carboxylate and sulfonate groups) to synthesize metal-organic frameworks (MOFs) bearing effective H-bond networks is a promising strategy to obtain highly proton conductive materials. In this work, a highly stable two-dimensional MOF, [Cu^II₅Cu^I₂(μ₃-OH)₄(H₂O)₆(L)₂(H₂L)₂]·3H₂O (denoted as YCu161; H₃L = 6-sulfonaphthalene-1,4-dicarboxylic acid) containing mixed-valence [Cu^II₅Cu^I₂(μ₃-OH)₄]⁸⁺ subunits, was successfully prepared. It exhibited excellent stability and temperature- and humidity-dependent proton conduction properties. Its optimal proton conductivity reached 1.84 × 10^-3 S cm^-1 at 90 °C and 98% relative humidity. On the basis of a crystal structure analysis, water vapor adsorption test results, and activation energy calculations, we deduced the proton conduction pathway and mechanism. Apparently, uncoordinated sulfonic and carboxyl groups and a network of abundant H-bonds inside the framework were responsible for the efficient proton transfer. Therefore, the strategy of selecting suitable bifunctional ligands to construct two-dimensional Cu-cluster-based MOFs with excellent proton conductivity is feasible.

High Proton Conduction in Two Highly Water-Stable Lanthanide Coordination Polymers from a Triazole Multicarboxylate Ligand

Two lanthanide coordination polymers (CPs) {[Er(Hmtbd)(H₂mtbd)(H₂O)₃]·2H₂O}_n (1) and [Yb(Hmtbd)(H₂mtbd)(H₂O)₃]_n (2) carrying an N-heterocyclic carboxylate ligand 5-(3-methylformate-1H-1,2,4-triazole-1-methyl)benzen-1,3-dicarboxylate (H₃mtbd) were prepared under solvothermal conditions. The single-crystal X-ray diffraction data demonstrate that 1 and 2 are isostructural and display 1D chain structure. Alternating current (AC) impedance measurements illustrate that the highest proton conductivities of 1 and 2 can attain 5.09 × 10^-3 and 3.09 × 10^-3 S·cm^-1 at 100 °C and 98% relative humidity (RH), respectively. The value of 1 exceeds those of most reported lanthanide-based crystalline materials and ranks second among the described Er-CPs under similar conditions, whereas the value for 2 is the highest proton conductivity among the previous Yb-CPs. Coupled with the structural analyses of the two CPs and H₂O vapor adsorption, the calculated E_a values help to deduce their proton conductive mechanisms. Notably, the N-heterocyclic units (triazole), carboxyl, and hydrogen-bonding network all play key roles in the proton-transfer process. The prominent proton conductive abilities of both CPs show great promise as efficient proton conductors.

Noncovalent Interactions at Lanthanide Complexes

Lanthanide complexes have attracted a widespread attention due to their structural diversity, as well as multifunctional and tunable properties. The development of lanthanide based functional materials has often relied on the design of the secondary coordination sphere of the corresponding lanthanide complexes. For instance, usually simple lanthanide salts (solvento complexes) do not catalyze effectively organic reactions or provide low yield of the expected product, whereas the presence of a suitable organic ligand with a noncovalent bond donor or acceptor centre (secondary coordination sphere) modifies the symmetry around the metal centre in lanthanide complexes which then successfully can act as catalysts in both homogenous and heterogenous catalysis. In this minireview, we discuss several relevant examples, based on X-ray crystal structure analyses, in which the hydrogen, halogen, chalcogen, pnictogen, tetrel and rare-earth bonds, as well as cation-π, anion-π, lone pair-π, π-π and pancake interactions, are used as a synthon in the decoration of the secondary coordination sphere of lanthanide complexes.

Structural, optical, dielectric and electrical transport properties of a [Mg(H2O)6]2+-templated proton conducting, semiconducting and photoresponsive 3D hydrogen bonded supramolecular framework

{[Co(2,5-Pdc)2,(H2O)2]2−·[Mg(H2O)6]2+·4(H2O)} (where 2,5-pdc = 2,5-pyridinedicarboxylate): a proton conducting semiconducting photoresponsive [Mg(H2O)6]2+ templated 3D hydrogen bonded supramolecular framework (HSF).

Metal hydrogen-bonded organic frameworks: structure and performance

Although great progress has been made in the design, synthesis, and performance expansion of porous materials, new porous materials with stable structures still need to be explored further. In recent years, porous molecular crystals formed by intermolecular interactions have attracted wide attention from chemists, especially metal hydrogen-bonded organic frameworks (M-HOFs) formed by connecting metal complexes through hydrogen bonds. Metal complexes with specific properties (e.g., magnetism, luminescence, sensing, and catalysis) can expand and develop the application of M-HOFs further. However, the huge volume, irregular shape, complex coordination modes, and interference of coordination bonds pose certain challenges in the synthesis and performance expansion of M-HOFs. In this frontier, we summarize the latest progress in the use of 3d, 4d, and 4f metal complexes for the synthesis of M-HOFs, and briefly introduce the performance expansion of these M-HOFs, which is expected to help expand new porous materials with stable structures and specific functions.

Polyoxometalate-based hydrogen-bonded organic frameworks as a new class of proton conducting materials

To develop new types of crystalline proton conducting materials for fuel cells, a polyoxometalate-based hydrogen-bonded organic framework (PHOF) based on Keggin-type [PMo₁₂O₄₀]³⁻ and phenylimidazole (PHOF 1) has been prepared.