A novel "mix-response" biosensor for colorimetric and photothermal dual-mode detection of sulfide ions in food based on silver-doping Prussian blue nanoparticle

Effective identification of sulfur ions (S2-) in foodstuff is crucial for food safety and human health, but it remains challenging. Traditional single-mode colorimetric sensing methods are simple and sensitive, but are prone to interference from colored substances which can lead to false positives or negatives results. Herein, we develop a novel "mix-response" biosensor for colorimetric and photothermal dual-mode detection of S2- with good simplicity, sensitivity and portability. In this biosensor, silver-doping Prussian blue nanoparticle (SPB NPs) was used as signal output component, which not only exhibits blue color characteristics, but also has photothermal conversion properties activated by near-infrared (NIR) laser. Upon increasing the S2- concentration, the prepared SPB NPs undergo etching, leading to the formation of new silver sulfide precipitation (Ag2S), along with different colorimetric and photothermal response signals. For the portable visualization of S2-, the color information was recorded by a smartphone in combination with RGB (red channel) analysis and the evolution of the photothermal signal was documented by a thermal imager. The introduction of smartphone and handheld thermal imager in this "mix-response" biosensor makes it suitable for on-site quantitative detection of S2- without sophisticated instrument. Moreover, the development of this "mix-response" biosensor does not need the use of recognition probes (e.g. aptamers and reaction intermediates), thereby simplifying the construct procedures of sensing strategies and improving the economic efficiency of detection. More importantly, the photothermal response signals can overcome the interference of colored substances in foods, thereby reducing the false positives or negatives of the detection results.

Dual-mode fluorescence and colorimetric sensing of sulfide anion in natural water based on near-infrared Ag2S quantum dots and MnO2 nanosheets complex

Near infrared (NIR) emission Ag2S quantum dots (QDs) are of great value for biochemical sensing with strong anti-interference and low toxicity. Herein, NIR fluorescence Ag2S QDs were synthesized successfully. Combined with the excellent oxidase-like characteristics of manganese dioxide (MnO2) nanosheets, a fluorescence and colorimetric dual-mode sensor for sulfide anion was developed. MnO2 nanosheets could effectively catalyze the oxidation of TMB to produce blue TMB oxide (ox TMB), at the same time, the fluorescence of Ag2S QDs could be effectively quenched by fluorescence internal filtration effect (IFE) and dynamic quenching effect. The enzyme-like activity was weakened and the NIR fluorescence of Ag2S QDs was restored when sulfide anion (S2-) was added, due to the reduction of MnO2 to Mn2+.The linear ranges for fluorescence and colorimetric analysis of S2- were 2-250 μM and 0.3-50 μM, with detection limits of 0.6 and 0.215 μM, correspondingly. The dual-mode sensor had a wider detection range, higher sensitivity and shorter reaction time, which could be used for highly selective detection of S2- in different concentration ranges. In addition, it had been successfully applied to the determination of sulfide in water samples with satisfactory accuracy and sensitivity.

Construction and Application of Multipurpose metal-organic frameworks -based Hydrogen Sulfide Probe

Hydrogen sulfide (H2S) is a toxic gas derived from the sulfur industry and trace H2S in the environment can cause serious ecological damage while inhalation can cause serious damage and lead to disease. Therefore, the real-time and accurate detection of trace sulfur ions is of great significance for environmental protection and early disease detection. Considering the shortcoming of current H2S probes in terms of stability and sensitivity, the development of novel probes is necessary. Herein, a novel metal-organic frameworks (MOF)-based material, UiO-66-NH2@BDC, was designed and prepared for the visual detection of H2S with rapid response (< 6 s) and low detection limit of S2- (0.13 µM) by hydrogen bonding. Based on its good optical performance, the UiO-66-NH2@BDC probe can detect S2- in various water environments. More importantly, UiO-66-NH2@BDC probe realize imaging S2- in cells and live zebrafish.

Tartaric acid stabilized iridium nanoparticles with excellent laccase-like activity

Iridium nanoparticles with an average size of 1.7 nm (Tar-IrNPs) were synthesized by the reduction of IrCl₃ with NaBH₄ in the presence of tartaric acid. As prepared Tar-IrNPs showed not only oxidase, peroxidase and catalase activities but also exhibited unprecedented laccase-like activity, which can catalyze the oxidation of the substrates o-phenylenediamine (OPD) and p-phenylenediamine (PPD) accompanied by significant color changes. The superb catalytic performance is evidenced by the fact that Tar-IrNPs can achieve better laccase-like activity with only 2.5% of the dosage of natural laccase. Furthermore, they also exhibited superior thermal stability and broader pH adaptability (2.0-11) over that of natural laccase. Tar-IrNPs can retain more than 60% of their initial activity at 90 °C, while the natural laccase has totally lost its activity at 70 °C. At a prolonged reaction time, the oxidation products of OPD and PPD can form precipitates due to oxidation induced polymerization. Thus Tar-IrNPs have been successfully used for the determination and degradation of PPD and OPD.

Cerium-terephthalic acid metal-organic frameworks for ratiometric fluorescence detecting and scavenging·OH from fuel combustion gas

Hydroxyl radical (•OH) in fuel combustion gas seriously damages human health. The techniques for simultaneously detecting and scavenging •OH in these gases are limited by poor thermal resistance. To meet this challenge, herein, metal organic frameworks (MOFs) with high thermal stability (80-400 °C) and dual function (•OH detection and elimination) are developed by coordinating Ce ions with terephthalic acid (TA) (Ce-BDC). Due to the reversible conversion between Ce³⁺ and Ce⁴⁺, and the high concentration of Ce³⁺ on the surface of Ce-BDC MOFs (89.6%), an •OH scavenging efficiency over 90% is realized. Ratiometric fluorescence (I_440 nm/I_355 nm) detection of •OH with a low detection limit of ∼4 μM is established by adopting Ce ions as an internal standard and TA as an •OH-responsive fluorophore. For real applications, the Ce-BDC MOFs demonstrate excellent •OH detection sensitivity and high •OH scavenging efficiency in gas produced from cigarettes, wood fiber and machine oil. Mouse model results show that the damage caused by •OH in cigarette smoke can be greatly reduced by Ce-BDC MOFs. This work provides a promising strategy for sensitively detecting and efficiently eliminating •OH in fuel combustion gas.

One-step hydrothermal synthesis of fluorescent silicon nanoparticles for sensing sulfide ions and cell imaging

We have presented a hydrothermal approach for synthesizing fluorescent silicon nanoparticles (F-SiNPs) with yellow-green emission. The obtained F-SiNPs exhibited excellent stability and good biocompatibility. By virtue of the specific reaction between S^2- and 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB), colorimetric assay of S^2- was realized with a good linear range of 0-100 μM. The colorimetric detection system could be further combined with F-SiNPs to construct a probe for fluorescence turn-off sensing S^2- in aqueous solution due to inner filter effect. In the fluorescent detection system, a good linearity with S^2- concentration in the range of 0-50 μM was accomplished. And as low as 0.1 μM S^2- was successfully detected. Moreover, the F-SiNPs displayed low cytotoxicity and good biocompatibility, and was further utilized for cell imaging. These results demonstrated the promising applications of F-SiNPs in S^2- analysis and bioimaging.