Photo-thermal synergistic excitation: Feasible strategy to detect ethanol for wide bandgap ZIF-8 at low work temperature

Zeolitic Imidazolate Framework-8 (ZIF-8) material was prepared by chemical precipitation method. The microstructure and physical properties of the as-prepared samples were characterized by XRD, BET, FESEM and UV spectrophotometer. The self-made four-channel measurement device was used to test the gas sensitivity of ZIF-8 material toward ethanol gas under photo-thermal synergistic excitation. The results showed that the sample was typical ZIF-8 (Eg = 4.96 eV) with a regular dodecahedron shape and the specific surface is up to 1793 m2/g. The as-prepared ZIF-8 has a gas response value of 55.04 to 100 ppm ethanol at 75°C and it shows good gas sensing selectivity and repeated stability. The excellent gas sensitivity can be attributed to the increase of free electron concentration in the ZIF-8 conduction band by photo-thermal synergistic excitation, and the large specific surface area of ZIF-8 material provides more active sites for gas-solid surface reaction. The reaction mechanism of ZIF-8 material under multi-field excitation was also discussed.

Cobalt-Centered Supramolecular Nanoensemble for Regulated Aerobic Oxidation of Alcohols and "One-Pot" Synthesis of Quinazolin-4(3H)-ones

The supramolecular assemblies of the donor-acceptor (D-A) system Im-Tpy, having phenanthro[9,10-d]imidazole as the donor and terpyridyl group as the acceptor unit, have been developed, which serve as supramolecular host to stabilize Co(II) in its nanoform. The as-prepared supramolecular nanoensemble Im-Tpy@Co in DMSO:water (7:3) shows high thermal stability and photostability. Even in the case of solvent mismatch, i.e., on dilution with cosolvent THF/DMSO, insignificant changes were observed in the size/morphology of the nanoensemble. The as-prepared Im-Tpy@Co nanoensemble in low catalytic loading (0.1 mol % of Co) catalyzes the oxidation of a wide variety of alcohols to aromatic aldehydes/ketones using visible light radiations as the source of energy without the need of any additive at room temperature. In comparison to already reported systems, the Im-Tpy@Co nanoensemble exhibits high turnover numbers (TONs) and turnover frequencies (TOFs). The practical application of the catalytic system has also been demonstrated in the gram-scale synthesis of 4-chlorobenzaldehyde. The Im-Tpy@Co nanoensemble exhibits recyclability up to four catalytic cycles with insignificant leaching and morphological changes. The present study also demonstrates the catalytic activity of the Im-Tpy@Co nanoensemble in "one-pot" synthesis of quinazolin-4(3H)-ones from 2-aminobenzamide and primary alcohols with better efficiency in comparison to other transition-metal-based catalytic systems.

Chitosan bead containing metal-organic framework encapsulated heteropolyacid as an efficient catalyst for cascade condensation reaction

Using cyclodextrin and chitosan that are bio-based compounds, a novel bi-functional catalytic composite is designed, in which metal-organic framework encapsulated phosphomolybdic acid was incorporated in a dual chitosan-cyclodextrin nanosponge bead. The composite was characterized via XRD, TGA, ICP, BET, NH₃-TPD, FTIR, FE-SEM/EDS, elemental mapping analysis and its catalytic activity was examined in alcohol oxidation and cascade alcohol oxidation-Knoevenagel condensation reaction. It was found that the designed catalyst that possess both acidic feature and redox potential could promote both reactions in aqueous media at 55 °C and various substrates with different electronic features could tolerate the aforementioned reactions to furnish the products in 75-95% yield. Furthermore, the catalyst could be readily recovered and recycled for five runs with slight loss of the catalytic activity. Notably, in this composite the synergism between the components led to high catalytic activity, which was superior to each component. In fact, the amino groups on the chitosan served as catalysts, while cyclodextrin nanosponge mainly acted as a phase transfer agent. Moreover, measurement of phosphomolybdic acid leaching showed that its incorporation in metal-organic framework and bead structure could suppress its leaching, which is considered a drawback for this compound. Other merits of this bi-functional catalyst were its simplicity, use of bio-based compounds and true catalysis, which was proved via hot filtration.

An efficient approach for the green synthesis of biologically active 2,3-dihydroquinazolin-4(1H)-ones using a magnetic EDTA coated copper based nanocomposite

2,3-Dihydroquinazolinone derivatives are known for antiviral, antimicrobial, analgesic, anti-inflammatory, and anticancer activities. However, recent approaches used for their synthesis suffer from various drawbacks. Therefore, we have fabricated a highly efficient magnetic EDTA-coated catalyst, Fe₃O₄@EDTA/CuI via a simple approach. The ethylenediamine tetraacetic acid (EDTA) plays a crucial role by strongly trapping the catalytic sites of CuI nanoparticles on the surface of the Fe₃O₄ core. The designed nanocatalyst demonstrates its potential for the catalytic synthesis of 2,3-dihydroquinazolinones using 2-aminobenzamide with aldehydes as the reaction partners. The nanocatalyst was thoroughly characterized through X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), vibrating sample magnetometry (VSM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma analysis (ICP). The physiochemically characterized nanocatalyst was tested for synthesis of 2,3-dihydroquinazolinones and higher yields of derivatives were obtained with less time duration. Moreover, the catalytic synthesis is easy to operate without the use of any kind of additives/bases. Furthermore, the catalyst was magnetically recoverable after the completion of the reaction and displayed reusability for six successive rounds without any loss in its catalytic efficiency (confirmed by XRD, SEM, and TEM of the recycled material) along with very low leaching of copper (2.12 ppm) and iron (0.06 ppm) ions. Also, the green metrics were found in correlation with the ideal values (such as E factor (0.10), process mass intensity (1.10), carbon efficiency (96%) and reaction mass efficiency (90.62%)).

Lanthanum-based metal organic framework (La-MOF) use of 3,4-dihydroxycinnamic acid as drug delivery system linkers in human breast cancer therapy

Metal organic frameworks (MOFs) have received a lot of attention in the research community due to their unique physical properties, which make them ideal materials for targeted drug delivery systems. In this paper, we describe the synthesis of a non-toxic La-based MOF with 3,4-dihydroxycinnamic acid (3,4-DHCA) as a linker. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), nitrogen adsorption–desorption measurements, and X-ray powder diffraction (XRD) have all been used to characterize it thoroughly. The La-based MOF showed good biocompatibility with the human breast cancer cell line MDA-MB-468. The ability of 3,4-DHCA to treat MDA-MB-468 cells was confirmed by 40.35% cell viability with La-based MOF. Based on the findings, La-based MOF can be recommended as a promising candidate for anticancer delivery.

Preparation of zeolitic imidazolate framework-67/wool fabric and its adsorption capacity for reactive dyes

Zeolitic imidazolate framework-67 (ZIF-67) formed by Co²⁺ and 2-methylimidazole (MIM) is widely used for adsorption and separation of pollutants. However, there are some disadvantages for ZIF-67 powder, such as strong electrostatic interaction and difficulty in recovery from the liquid phase. The available way to solve the above problems is choosing a suitable substrate to load ZIF-67. The amino and hydroxyl of wool fabrics effectively capture and fix ZIF-67, making it easy to separate ZIF-67 by taking out the composite materials from aqueous solution. In this study, ZIF-67/Wool fabric (ZW) was successfully prepared. The results show that ZIF-67 has better adsorption performance for reactive dyes with more sulfonic groups, higher molecular weight and lower steric resistance. The equilibrium adsorption capacity of ZW for reactive red 195 was 4.15 mg g^-1. The adsorption accorded with pseudo-second-order kinetic model and Langmuir isotherm. This study improved the application of ZIF-67, which provided a treatment method for dyeing wastewater and made it possible to recycle waste wool.

Functionalization of zirconium-based metal-organic frameworks for gas sensing applications

The functionalization and incorporation of noble metals in metal-organic frameworks have been widely used as efficient methods to enhance their applicability. Herein, a sulfone-functionalized Zr-MOF framework labeled Zr-BPDC-SO₂ (BPDC-SO₂ =dibenzo[b,d]-thiophene-3,7-dicarboxylate 5,5-dioxide) and its Pd-embedded composite were efficiently synthesized by adjusting their functional groups. The obtained compounds were characterized to assess their potential for gas sensing applications. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, specific surface area measurements, and thermogravimetric analysis were employed to characterize the new sensor materials. The gas sensing properties of the novel functionalized sensor materials were systematically investigated under various temperature, concentration, and gas type conditions. Owing to the strong hydrogen bonds of the sulfonyl groups and Zr₆ clusters in the framework with the hydroxyl groups of ethanol, Zr-BPDC-SO₂ emerged as an effective sensor for ethanol detection. In addition, Pd@Zr-BPDC-SO₂ exhibited efficient hydrogen sensing performance, in terms of sensor dynamics and response. More importantly, the material showed a higher sensing response to hydrogen than to other gases, highlighting the important role of Pd in the Zr-MOF-based hydrogen sensor. The results of the sensing tests carried out in this study highlight the promising potential of the present materials for practical gas monitoring applications.

An efficient transition-metal-free route to quinazolin-4(3H)-ones via 2-aminobenzamides and thiols

An efficient approach to quinazolin-4(3H)-ones was developed by a one-pot intermolecular annulation reaction of o-amino benzamides and thiols.