Synthesis and fabrication of magnetically separable phosphate-modified magnetic chitosan composites for lead(II) selective removal from wastewater

To address the urgent need for efficient removal of lead-containing wastewater and reduce the risk of toxicity associated with heavy-metal wastewater contamination, materials with high removal rates and easy separation must be developed. Herein, a novel organic-inorganic hybrid material based on phosphorylated magnetic chitosan (MSCP) was synthesized and applied for the selective removal of lead (II) from wastewater. From the characterization and the experimental results can be obtained that the magnetic saturation strength of MSCP reaches 14.65 emu/g, which can be separated quickly and regenerated readily, and maintains high adsorption performance even after 5 cycles, indicating that the adsorbent possesses good magnetic separation performance and durability. Also, MSCP showed high selective adsorption performance for lead in the multiple metal ions coexistence solutions at pH 6.0 and room temperature, with an adsorption coefficient SPb-MSCP of 78.85%, which was much higher than that of MSC (the SPb-MSC was 11.59%). Additionally, in the single lead system, the sorption characteristics of Pb(II) on MSCP and MCP had obvious pH-responsiveness, and their adsorption capacity increased with the increase of solution pH, reaching the maximal values of 80.19 and 72.68 mg/g, respectively. It is noteworthy that the acid resistance of MSCP with an inert layer coated on the core is significantly improved, with almost no iron leaching from MSCP over the entire acidity range, while MCP has 7.63 mg/g of iron leaching at pH 1.0. Significantly, MSCP exhibited a maximum adsorption capacity of 102.04 mg/g, which matches the Langmuir model at pH 6.0 and 298.15 K, and points to the pseudo-second-order kinetics of the chemisorption process of Pb(II) on MSCP. These findings highlight the great potential of MSCP for Pb(II) removal from aqueous solution, making it a promising solution for Pb(II) contamination in wastewater.

Activated nanosulfur for broad-spectrum heavy metals capture

Current problems of existing heavy metal-removing technologies, especially for nanomaterials-based ones, are typically single metal ion-specific, high-cost and collected difficult. Herein, facile modification of commercial sulfur creates a versatile adsorbent platform to address challenges. The versatile adsorbent can be easily prepared through solvothermal treatment of a saturated commercial sulfur solution, followed by water precipitation on a commercial foam that eliminates the need for separation. Interestingly, the solvothermal treatment endows the resulting nanosulfur with sulfate acid groups (hard Lewis base), sulfur anions (soft base), and sulfite groups (borderline base), promising the coordination of all types of heavy metal ions (Lewis acids). As such, this versatile adsorbent with well-distributed adsorption sites exhibits highly effective heavy metal adsorption capacity towards diverse heavy metal ions for both single-component and multi-component adsorption, including soft, hard, borderline Lewis metal ions, with ultra-high adsorption ability (e.g., 903.79 mg g-1 for Cu2+). These findings highlighted the potential of this low-cost sulfur-based adsorbent to address the arising challenges in ensuring clean water.

Polydopamine Enhanced Interactions of Graphene Nanosheets to Fabricate Graphene/Polydopamine Aerogels with Effectively Clear Organic Pollutants

Graphene/polydopamine aerogels (GPDXAG, where X represents the weight ratio of DA·HCl to GO) were prepared by the chemical reduction of graphene oxide (GO) using dopamine (DA) and l-ascorbic acid as reducing agents. During the gelation process, DA was polymerized to form polydopamine (PDA). The introduction of PDA in the gelation of aerogels led to a deeper reduction of GO and stronger interactions between graphene nanosheets forced by covalent cross-linking and noncovalent bonding including π-π stacking and hydrogen bonding. The weight ratio of DA·HCl to GO influencing the formation and morphology of GPDXAG was explored. With the increasing content of DA in gelation, the reduction of GO and the cross-linking degree of graphene nanosheets were enhanced, and the resulting GPDXAG had a more regular pore distribution. Additionally, introducing PDA into GPDXAG improved its hydrophobicity because of the adhesion of PDA to a network of aerogels. GPDXAG exhibited a higher removal efficiency for organic pollutants than the controlled graphene aerogels (GAG). Specifically, the adsorption capacity of GPDXAG for organic solvents was superior to that of GAG, and organic solvent was completely separated from the oil/water mixture by GPDXAG. The equilibrium adsorption capacity of GPDXAG for malachite green (MG) was measured to be 768.50 mg/g, which was higher than that for methyl orange (MO). In MG/MO mixed solutions, aerogels had obvious adsorption selectivity for the cationic dye. The adsorption mechanism of aerogels for MG was also discussed by simulating adsorption kinetic models and adsorption isothermal models.

Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review

Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.

Bimetallic Organic Gel for Effective Methyl Orange Dye Adsorption

A bimetallic organic gel (MOG-Fe/Al) was synthesized through the solvothermal method. The gel state of the product obtained under optimized gel formation conditions is sufficient to carry 2 g of weight for a long time. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Brunauer-Emmett-Teller (BET) technique, and X-ray photoelectron spectroscopy (XPS) analysis confirmed the structures and morphologies of the synthesized materials. MOG-Fe/Al, with good stability, excellent durability, and wide applicability, exhibited efficient MO adsorption capacity as high as 335.88 mg/g at 25 °C. Adsorption-influencing factors including solution pH, contact time, and temperature were investigated. The adsorption performance of the bimetallic organic gel was better than that of the monometallic organic gels (MOG-Fe and MOG-Al), and its adsorption processes were in accordance with the pseudo-second-order kinetic and Langmuir isothermal models. The excellent adsorption capacity of the MOG-Fe/Al is due to its surface structure, pore volume, π-π interactions, hydrogen bonds, and electrostatic interactions.

Free-standing N, S co-doped graphene aerogels coupled with Eucalyptus wood tar-based activated carbon and cellulose nanofibers for high-performance supercapacitor and removal of Cr(VI)

N, S-dual doping graphene aerogels with three dimensional interconnected network and large specific surface area have been fabricated by cellulose nanofibers (CNF), Eucalyptus wood tar-based activated carbon (AC), and reduced graphene oxide (rGO) for the energy storage applications as well as the removal of Cr(VI). Benefiting from the particular pore structural characteristics, the optimized activated carbon aerogel electrode (GDAC) exhibited prominent capacitances of 813.8 F/g at 1 A/g, and prominent cycling stability. The Ragone plot for the GDAC supercapacitor depicted that the energy density reached maximum (50 Wh/kg) when the power density was 370 W/kg. As far as the adsorption capacity of GDAC for Cr(VI), GDAC achieved a removal rate of 97 % for Cr(VI) and a maximum adsorption capacity of 939.20 mg/g. The fabrication method and excellent performance of GDAC proposed in this study provided new perspective into the potential application of Eucalyptus wood tar-based materials in the supercapacitor applications. Additionally, the comprehensive analysis of the structure-function relationship also provided important theoretical foundations for the removal of Cr(VI).

Nanocellulose-based aerogels for water purification: A review

Water purification using thin membranes at high pressures through adsorption and size exclusion is the widely used mechanism due to its simplicity and enhanced efficiency compared to other traditional water purification methods. Aerogels have the potential to replace conventional thin membranes considering their unmatched adsorption/absorption capacity and higher water flux due to their unique highly porous (99 %) 3D structure, ultra-low density (~1.1 to 500 mg/cm³), and very high surface area. The availability of a large number of functional groups, surface tunability, hydrophilicity, tensile strength and flexibility of nanocellulose (NC) makes it a potential candidate for aerogel preparation. This review discusses the preparation and employment of NC-based aerogels in the removal of dyes, metal ions and oils/organic solvents. It also offers recent updates on the effect of various parameters that enhance its adsorption/absorption performance. The future perspectives of NC aerogels and their performance with the emerging materials chitosan and graphene oxide are also compared.

3D self-assembled indium sulfide nanoreactor for in-situ surface covalent functionalization: Towards high-performance room-temperature NO2 sensing

Thiol functionalization of two-dimensional (2D) metal sulfides has been demonstrated as an effective approach to enhance the sensing performances. However, most thiol functionalization is realized by multiple-step approaches in liquid medium and depends on the dispersity of 2D materials. Here, we utilize a three-dimensional (3D) In₂S₃ nano-porous structure that self-assembled from 2D components as the nanoreactor, in which the surface-absorbed thiol molecules from the chemical residues of the nanoreactor are used for the in-situ covalent functionalization. Such functionalization is realized by facile heat the nanoreactor at 100 °C, leading to the recombing sulfur vacancies with thiol-terminated groups. The NO₂ sensing performances of such functionalized nanoreactor are investigated at room temperature, in which In₂S₃-100 exhibits a response magnitude of 21.5 towards 10 ppm NO₂ with full reversibility, high selectivity, and excellent repeatability. Such high-performance gas sensors can be attributed to the additional electrons that transferring from the functional group into the host, thus significantly modifying the electronic band structure. This work provides a guideline for the facile in-situ functionalization of metal sulfides and an efficient strategy for the high performances gas sensors without external stimulus.

Utilization of a double-cross-linked amino-functionalized three-dimensional graphene networks as a monolithic adsorbent for methyl orange removal: Equilibrium, kinetics, thermodynamics and artificial neural network modeling

Herein, it is aimed to develop a high-performance monolithic adsorbent to be utilized in methyl orange (MO) adsorption. Therefore, amino-functionalized three-dimensional graphene networks (3D-GN_f) fulfilling the requirements of reusability and high capacity have been fabricated via hydrothermal self-assembly approach followed by a double-crosslinking strategy. The potential utilization of 3D-GN_f as an adsorbent for removal MO has been assessed using both batch-adsorption studies and an artificial neural network (ANN) approach. Graphene oxide sheets have been amino-functionalized and cross-linked, by ethylenediamine (EDA) during hydrothermal treatment, following the glutaraldehyde has used as a double-crosslinking agent to facilitate the crosslinking of architecture. The successful fabrication of 3D-GN_f has been confirmed by field-emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR), Raman and X-ray photoelectron spectroscopy (XPS). Moreover, N₂ adsorption/desorption isotherms have revealed the high specific surface area (1015 m² g^-1) with high pore volume (1.054 cm³ g^-1) and hierarchical porous structure of 3D-GN_f. The effect of initial concentration, contact time, and temperature on adsorption capacity have been thoroughly studied, and the kinetics, isotherms, and thermodynamics of MO adsorption have been modelled. The MO adsorption has been well defined by the pseudo-second-order kinetic model and Langmuir isotherm model with a monolayer adsorption capacity of 270.27 mg g^-1 at 25 °C. The thermodynamic findings have revealed MO adsorption has occurred spontaneously with an endothermic process. The Levenberg-Marquardt backpropagation algorithm has been implemented to train the ANN model, which has used the activation functions of tansig and purelin functions at the hidden and output layers, respectively. An optimum ANN model with high-performance metrics (coefficient of determination, R² = 0.9995; mean squared error, MSE = 0.0008) composed of three hidden layers with 5 neurons in each layer was constructed to forecast MO adsorption. The findings have shown that experimental results are consistent with ANN-based data, implying that the suggested ANN model may be used to forecast cationic dye adsorption.

Fruit waste-derived cellulose and graphene-based aerogels: Plausible adsorption pathways for fast and efficient removal of organic dyes

A wide range of organic pollutants in industrial effluents, agricultural runoff, and domestic discharges are exacerbating water scarcity, leading to water-borne ailments, and adversely affecting the marine ecosystem and biodiversity. The efficient, sustainable, and cost-effective materials need to be addressed urgently for the removal of organic pollutants. Herein, ultra-light (0.018 g.cm^-3) and highly porous (96.4%) composite aerogel is prepared by gelatinization of graphene oxide with fruit waste-derived cellulose. The macroscopic porosity generated by interconnecting cellulosic skeleton and graphene oxide sheets via hydrogen bonding network provided ample avenues for transport and diffusion of organic dyes-enriched wastewater throughout the cellulose-graphene oxide composite aerogel (CGA). Consequently, organic dyes are efficiently adsorbed by easily accessible surface sites distributed throughout the CGA. The size, charge, and chemical structure of organic dyes along with textural features and accessible surface active sites of CGA governed the adsorption process. The spectroscopic analyses based on FTIR, Raman, and XPS measurements suggest electrostatic, n-π, π-π, cation-π interactions, dipole-dipole hydrogen, and Yoshida hydrogen linkages as major interactive pathways for the adsorption of organic dyes by the CGA. Moreover, the composite aerogel furnished an excellent recyclability for the adsorptive removal of organic pollutants from wastewater. The present work promises the potential of 2D nanostructured layered materials and fruit-waste-derived composite aerogels for sustainable utilization in wastewater treatment, which can be an excellent step towards water security.

Recent trends in covalent functionalization of 2D materials

Covalent functionalization of the surface is more crucial in 2D materials than in conventional bulk materials because of their atomic thinness, large surface-to-volume ratio, and uniform surface chemical potential. Because...

Mesoporous maltose/calcium oxalate hybrid material with abundant reaction sites and its efficient Pb(ii) removal from diverse water bodies

Maltose/calcium oxalate exhibits high capacity and selective adsorption of Pb(ii) due to the synergistic mechanism of ion exchange, electrostatic and complexation.

Synergy Effects in Heavy Metal Ion Chelation with Aryl- and Aroyl-Substituted Thiourea Derivatives

Detection and removal of metal ion contaminants have attracted great interest due to the health risks that they represent for humans and wildlife. Among the proposed compounds developed for these purposes, thiourea derivatives have been shown as quite efficient chelating agents of metal cations and have been proposed for heavy metal ion removal and for components of high-selectivity sensors. Understanding the nature of metal-ionophore activity for these compounds is thus of high relevance. We present a theoretical study on the interaction between substituted thioureas and metal cations, namely, Cd²⁺, Hg²⁺, and Pb²⁺. Two substituent groups have been chosen: 2-furoyl and m-trifluoromethylphenyl. Combining density functional theory simulations with wave function analysis techniques, we study the nature of the metal-thiourea interaction and characterize the bonding properties. Here, it is shown how the N,N'-disubstituted derivative has a strong affinity for Hg²⁺, through cation-hydrogen interactions, due to its greater oxidizing capacity.

Graphene-Based Materials Immobilized within Chitosan: Applications as Adsorbents for the Removal of Aquatic Pollutants

Graphene and its derivatives, especially graphene oxide (GO), are attracting considerable interest in the fabrication of new adsorbents that have the potential to remove various pollutants that have escaped into the aquatic environment. Herein, the development of GO/chitosan (GO/CS) composites as adsorbent materials is described and reviewed. This combination is interesting as the addition of graphene to chitosan enhances its mechanical properties, while the chitosan hydrogel serves as an immobilization matrix for graphene. Following a brief description of both graphene and chitosan as independent adsorbent materials, the emerging GO/CS composites are introduced. The additional materials that have been added to the GO/CS composites, including magnetic iron oxides, chelating agents, cyclodextrins, additional adsorbents and polymeric blends, are then described and discussed. The performance of these materials in the removal of heavy metal ions, dyes and other organic molecules are discussed followed by the introduction of strategies employed in the regeneration of the GO/CS adsorbents. It is clear that, while some challenges exist, including cost, regeneration and selectivity in the adsorption process, the GO/CS composites are emerging as promising adsorbent materials.

Adsorption of rhodamine B by organic porous materials rich in nitrogen, oxygen, and sulfur heteroatoms

Rhodamine B is a non-degradable carcinogenic dye, so it is of great significance to remove rhodamine B from wastewater.