C-Cl Bond Activation at Rotated vs Unrotated Dinuclear Site Related to [FeFe]-Hydrogenases

The novel dinuclear complex related to the [FeFe]-hydrogenases active site, [Fe2(μ-pdt)(κ2-dmpe)2(CO)2] (1), is highly reactive toward chlorinated compounds CHxCl4-x (x = 1, 2) affording selectively terminal or bridging chloro diiron isomers through a C-Cl bond activation. DFT calculations suggest a cooperative mechanism involving a formal concerted regioselective chloronium transfer depending on the unrotated or rotated conformation of two isomers of 1.

Synthesis, Spectroscopy, and Structure of [FeRu(μ-dithiolate)(CN)2(CO)4]2

The salt [K(18-crown-6)]2[Ru(CN)2(CO)3] ([K(18-crown-6)]2[1]) was generated by the reaction of Ru(C2H4)(CO)4 with [K(18-crown-6)]CN. An initial thermal reaction gives [Ru(CN)(CO)4]-, which, upon ultraviolet (UV) irradiation, reacts with a second equiv of CN-. Protonation of [1]2- gave [HRu(CN)2(CO)3]- ([H1]-), which was isolated as a single isomer with mutually trans cyanide ligands. The complex cis,cis,cis-[Ru(pdt)(CN)2(CO)2]2- ([2]2-) was prepared by the UV-induced reaction of [1]2- with propanedithiol (pdtH2). The corresponding iron complex cis,cis,cis-[Fe(pdt)(CN)2(CO)2]2- ([3]2-) was prepared similarly. The pdt complexes [2]2- and [3]2- were treated with Fe(benzylideneacetone)(CO)3 to give, respectively, [RuFe (μ-pdt)(CN)2(CO)4]2- ([5]2-) and [Fe2(μ-pdt)(CN)2(CO)4]2- ([4]2-). The pathway from [3]2- to Fe2 complex [4]2- implicates intermetallic migration of CN-. In contrast, the formation of [5]2- leaves the Ru(CN)2(CO) center intact, as confirmed by X-ray crystallography. The structure of [5]2- features a "rotated" square-pyramidal Fe(CO)2(μ-CO) site. NMR measurements indicate that the octahedral Ru site is stereochemically rigid, whereas the Fe site dynamically undergoes turnstile rotation. 57Fe Mössbauer spectral parameters are very similar for rotated [5]2- and unrotated Fe2 complex [4]2-, indicating the insensitivity of that technique to both the geometry and the oxidation state of the Fe site. According to cyclic voltammetry, [5]2- oxidizes at E1/2 ∼ -0.8 V vs Fc+/0. Electron paramagnetic resonance (EPR) measurements show that 1e- oxidation of [5]2- gives an S = 1/2 rhombic species, consistent with the formulation Ru(II)Fe(I), related to the Hox state of the [FeFe] hydrogenases. Density functional theory (DFT) studies reproduce the structure, 1H NMR shifts, and infrared (IR) spectra observed for [5]2-. Related homometallic complexes with both cyanides on a single metal are predicted to not adopt rotated structures. These data suggest that [5]2- is best described as Ru(II)Fe(0). This conclusion raises the possibility that for some reduced states of the [FeFe]-hydrogenases, the [2Fe]H site may be better described as Fe(II)Fe(0) than Fe(I)Fe(I).

Enzymatic and Bioinspired Systems for Hydrogen Production

The extraordinary potential of hydrogen as a clean and sustainable fuel has sparked the interest of the scientific community to find environmentally friendly methods for its production. Biological catalysts are the most attractive solution, as they usually operate under mild conditions and do not produce carbon-containing byproducts. Hydrogenases promote reversible proton reduction to hydrogen in a variety of anoxic bacteria and algae, displaying unparallel catalytic performances. Attempts to use these sophisticated enzymes in scalable hydrogen production have been hampered by limitations associated with their production and stability. Inspired by nature, significant efforts have been made in the development of artificial systems able to promote the hydrogen evolution reaction, via either electrochemical or light-driven catalysis. Starting from small-molecule coordination compounds, peptide- and protein-based architectures have been constructed around the catalytic center with the aim of reproducing hydrogenase function into robust, efficient, and cost-effective catalysts. In this review, we first provide an overview of the structural and functional properties of hydrogenases, along with their integration in devices for hydrogen and energy production. Then, we describe the most recent advances in the development of homogeneous hydrogen evolution catalysts envisioned to mimic hydrogenases.

Geometrical influence on the non-biomimetic heterolytic splitting of H2 by bio-inspired [FeFe]-hydrogenase complexes: a rare example of inverted frustrated Lewis pair based reactivity

Despite the high levels of interest in the synthesis of bio-inspired [FeFe]-hydrogenase complexes, H2 oxidation, which is one specific aspect of hydrogenase enzymatic activity, is not observed for most reported complexes. To attempt H-H bond cleavage, two disubstituted diiron dithiolate complexes in the form of [Fe2(μ-pdt)L2(CO)4] (L: PMe3, dmpe) have been used to play the non-biomimetic role of a Lewis base, with frustrated Lewis pairs (FLPs) formed in the presence of B(C6F5)3 Lewis acid. These unprecedented FLPs, based on the bimetallic Lewis base partner, allow the heterolytic splitting of the H2 molecule, forming a protonated diiron cation and hydrido-borate anion. The substitution, symmetrical or asymmetrical, of two phosphine ligands at the diiron dithiolate core induces a strong difference in the H2 bond cleavage abilities, with the FLP based on the first complex being more efficient than the second. DFT investigations examined the different mechanistic pathways involving each accessible isomer and rationalized the experimental findings. One of the main DFT results highlights that the iron site acting as a Lewis base for the asymmetrical complex is the {Fe(CO)3} subunit, which is less electron-rich than the {FeL(CO)2} site of the symmetrical complex, diminishing the reactivity towards H2. Calculations relating to the different mechanistic pathways revealed the presence of a terminal hydride intermediate at the apical site of a rotated {Fe(CO)3} site, which is experimentally observed, and a semi-bridging hydride intermediate from H2 activation at the Fe-Fe site; these are responsible for a favourable back-reaction, reducing the conversion yield observed in the case of the asymmetrical complex. The use of two equivalents of Lewis acid allows for more complete and faster H2 bond cleavage due to the encapsulation of the hydrido-borate species by a second borane, favouring the reactivity of each FLP, in agreement with DFT calculations.

Biomimetics of [FeFe]-hydrogenases incorporating redox-active ligands: Synthesis, redox and spectroelectrochemistry of diiron-dithiolate complexes with ferrocenyl-diphosphines as Fe4S4 surrogates

[FeFe]-ase biomimics containing a redox-active ferrocenyl diphosphine have been prepared and their ability to reduce protons and oxidise H2 studied, including 1,1’-bis(diphenylphosphino)ferrocene (dppf) complexes Fe2(CO)4(-dppf)(-S(CH2)nS) (n = 2, edt; n...

Challenges in the Synthesis of Active Site Mimics for [NiFe]-Hydrogenases

One of the more active areas in bioorganometallic chemistry is the preparation and reactivity studies of active site mimics of the [NiFe]-hydrogenases. One area of particular recent progress involves reactions that interconvert Ni(μ-X)Fe centers for X = OH, H, CO, as described by Song et al. Such reactions illustrate new ways to access intermediates related to the Ni-R and Ni-SI states of the enzyme. Most models are derivatives of the type (diphosphine)Ni(SR)2Fe(CO)3-n(PR'3)n. In recent work, the methodology has been generalized to include FeII(diphosphine) derivatives of Ni(N2S2), where N2S22- is the tetradentate diamine-dithiolate (CH2N(CH3)CH2CH2S-)2. Indeed, models based on Ni(N2S2) have proven valuable, but these studies also highlight challenges in working with heterobimetallic complexes, specifically the tendency of some such Ni-Fe complexes to convert to homometalliic Ni-Ni derivatives. This kind of problem is not readily detected by X-ray crystallography. With this caution in mind, we argue that one series of complexes recently described in this journal are almost certainly misassigned.

The Photochemistry of Fe2(S2C3H6)(CO)6(µ-CO) and Its Oxidized Form, Two Simple [FeFe]-Hydrogenase CO-Inhibited Models. A DFT and TDDFT Investigation

FeIFeI Fe2(S2C3H6)(CO)6(µ-CO) (1a–CO) and its FeIFeII cationic species (2a+–CO) are the simplest model of the CO-inhibited [FeFe] hydrogenase active site, which is known to undergo CO photolysis within a temperature-dependent process whose products and mechanism are still a matter of debate. Using density functional theory (DFT) and time-dependent density functional theory (TDDFT) computations, the ground state and low-lying excited-state potential energy surfaces (PESs) of 1a–CO and 2a+–CO have been explored aimed at elucidating the dynamics of the CO photolysis yielding Fe2(S2C3H6)(CO)6 (1a) and [Fe2(S2C3H6)(CO)6]+ (2a+), two simple models of the catalytic site of the enzyme. Two main results came out from these investigations. First, a–CO and 2a+–CO are both bound with respect to any CO dissociation with the lowest free energy barriers around 10 kcal mol−1, suggesting that at least 2a+–CO may be synthesized. Second, focusing on the cationic form, we found at least two clear excited-state channels along the PESs of 2a+–CO that are unbound with respect to equatorial CO dissociation.