Application of Mesoporous Carbon-Based Highly Dispersed K-O2 Strong Lewis Base in the Efficient Catalysis of Methanol and Ethylene Carbonate

As an atom-economical reaction, the direct generation of dimethyl carbonate (DMC) and ethylene glycol (EG) via the transesterification of CH3OH and ethylene carbonate (EC) has several promising applications, but the exploration of carriers with high specific surface areas and novel heterogeneous catalysts with more basic sites remains a long-standing research challenge. For this purpose, herein, a nitrogen-doped mesoporous carbon (NMC, 439 m2/g) based K-O2 Lewis base catalyst (K-O2/NMC) with well-dispersed strongly basic sites (2.23 mmol/g, 84.5%) was designed and synthesized. The compositions and structures of NMC and K-O2/NMC were comprehensively investigated via Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, N2 adsorption-desorption, CO2 temperature-programmed desorption, and contact angle measurements. The optimal structural configuration and electron cloud distribution of the K-O2/NMC catalyst were simulated using first-principles calculations. The electron transfer predominantly manifested as a flow from K-O to C-O/C-N, and the interatomic interactions between each atom were enhanced and exhibited a tendency for a more stable state after redistribution. Furthermore, the adsorption energies (Eads) of CH3OH at K-O-O and K-O-N sites were -1.4185 eV and -1.3377 eV, respectively, and the O atom in CH3OH exhibited a stronger adsorption tendency for the K atom at the K-O-O site. Under the optimal conditions, the EC conversion, DMC/EG selectivity, and turnover number/frequency were 80.9%, 98.6%/99.4%, and 40.5/60.8 h-1, respectively, with a reaction rate constant (k) of 0.1005 mol/(L·min). Results showed that the heterogeneous K-O2/NMC catalyst prepared herein greatly reduced the reaction cost while guaranteeing the catalytic effect, and the whole system required a lower reaction temperature (65 °C), a shorter reaction time (40 min), and a lower catalyst amount (2.0 wt % of EC). Therefore, K-O2/NMC can be used as a catalyst in different transesterification reactions.

Mn-doped CeO2 derived from Ce-MOF porous nanoribbons as highly active catalysts for the synthesis of dimethyl carbonate from CO2 and methanol

It is desirable but challenging to develop highly-efficient catalysts for the direct synthesis of dimethyl carbonate (DMC) from methanol and CO2. The vacancy-mediated incorporation of heteroatom into surface reconstruction is an efficient method of defect engineering for enhancing the catalytic properties. In this work, manganese-doped cerium oxide porous nanoribbons (Mn/CeO2-BTC) were prepared derived from a Ce-BTC by a sacrificial template approach. It is found that the catalytic activity of Mn/CeO2-BTC catalysts can be readily controlled by varying the amount of Mn dopants and the as-synthesized 0.1-Mn/CeO2-BTC exhibited an outstanding activity for the synthesis of DMC from CO2 and methanol, which reached a high DMC yield (6.53 mmolDMC/gcat.) without any dehydrating agents. Based on characterization results, the enhanced performance may be attributed to the defective structures caused by Mn doping and the porous nanoribbons of the CeO2 crystals, which provide more surface oxygen vacancies and acidic-basic sites, favoring adsorption and activation of CO2 and methanol.

Synthesis of dimethyl carbonate from methanol and CO2 under low pressure

A mild and highly efficient approach has been developed for the direct synthesis of dimethyl carbonate (DMC) from methanol and CO₂ under low initial pressure. The key to a successful transformation is the use of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), CH₂Br₂ and ionic liquid. Under the optimized reaction conditions, the yield of DMC was obtained up to 81% under 0.25 MPa. The direct synthesis of DMC can be carried out at balloon pressure using CH₂Br₂ and DBU. In this case, after the reaction, DBU was proved to be recyclable after having been treated with KOH in ethanol. In addition, a plausible mechanism for this synthetic reaction was proposed according to the experimental results.

A mild and efficient approach for the synthesis of dimethyl carbonate from methanol and CO₂ under low initial pressure was developed.