Anisotropic circular photogalvanic effect in colloidal tin sulfide nanosheets

Recent advances in 2D TMD circular photo-galvanic effects

Two-dimensional (2D) layered semiconductors are appealing materials for high-specific-power photovoltaic systems due to their unique optoelectronic properties. The 2D materials can be naturally thin, and their properties can be altered in a variety of ways. Therefore, these materials may be used to develop high-performance opto-spintronic and photovoltaic devices. The most recent and promising strategies were used to induce circular photo-galvanic effects (CPGEs) in 2D TMD materials with broken inversion symmetry. The majority of quantum devices were manufactured by mechanical exfoliation to investigate the electrical behavior of ultrathin 2D materials. The investigation of CPGEs in 2D materials could enable the exploration of spin-polarized optoelectronics to produce more energy-efficient computing systems. The current research on nanomaterial-based materials paves the way for developing materials to store, manipulate, and transmit information with better performance. Finally, this study concludes by summarizing the current challenges and prospects.

Strain modulation of photocurrent in Weyl semimetal TaIrTe4

We study the effect of the strain on the energy bands of a TaIrTe₄ sheet and the photocurrent in the Cu-TaIrTe₄-Cu heterojunction by using the quantum transport simulations. It is found that the Weyl points can be completely broken with an increase of the strain along the z direction. One can obtain a large photocurrent in the Cu-TaIrTe₄-Cu heterojunction in the absence of the strain; while the photocurrent can be sharply enhanced by the strain and reach a large value. Accordingly, the maximum values of the photocurrent can be explained in terms of the transitions between peaks of density of states and band structures. The strain-induced energy bands and photocurrent exhibit anisotropic behaviors. Our results provide a novel, to the best of our knkowledge, route to effectively modulate the energy bands and the photocurrent by utilizing mechanical methods for TaIrTe₄-based devices.

Incident Angle Dependence of the Waveform of the Polarization-Sensitive Photoresponse in CuSe/Se Thin Film

The results of studying the waveforms of longitudinal and transverse photocurrent pulses generated in thin, semitransparent CuSe/Se films as a function of the angle of incidence (α) of a femtosecond laser beam at linear and circular polarizations are presented. It has been established that the durations of unipolar longitudinal photocurrent pulses at linear and circular polarizations of laser pumping do not depend on the angle α. It is shown that the evolution of the temporal profile of the helicity-sensitive transverse photocurrent with a change in α strongly depends on polarization. At linear polarization, the shape of the unipolar pulses remains virtually constant; however, at circular polarization, the generation of unipolar and bipolar pulses is possible, with the waveforms strongly depending on the angle α. The influence of the incidence angle on the waveforms of transverse photocurrent pulses is explained by the transformation of linear and circular polarization into an elliptical upon the refraction of light at the air/semitransparent film interface and by the interplay of photocurrents arising due to linear and circular surface photogalvanic effects in the film. The presented findings can be utilized to develop polarization and incidence angle-sensitive photovoltaic devices.

Twisted black phosphorus-based van der Waals stacks for fiber-integrated polarimeters

The real-time, in-line analysis of light polarization is critical in optical networks, currently suffering from complex systems with numerous bulky opto-electro-mechanical elements tandemly arranged along the optical path. Here, we design and fabricate a fiber-integrated polarimeter by vertically stacking three photodetection units based on six-layer van der Waals materials, including one bismuth selenide (Bi₂Se₃) layer for power calibration, two twisted black phosphorus (BP) layers for polarization detection, and three hexagonal boron nitride (hBN) layers for encapsulation. The self-power-calibrated, self-driven, and unambiguous detection of both linearly polarized (LP) and circularly polarized (CP) light is realized by the broken symmetry-induced linear photogalvanic effects (LPGEs) and circular photogalvanic effects (CPGEs) in the two BP units. Moreover, the device enables single-pixel polarimetric imaging to acquire spatial polarization information. The ultracompact device structure, free from external optical and mechanical modules, may inspire the development of miniaturized optical and optoelectronic systems.

Outstanding spin-transport properties of a flexible phosphorene photodetector driven by the photogalvanic effect under mechanical strains

Monolayer phosphorene has outstanding spintronic properties including a nanosecond spin lifetime, and micrometer spin relaxation length, combined with excellent mechanical flexibility, making it rather attractive in low-dimensional flexible spintronic devices. However, knowledge on the spin-transport properties of phosphorene under mechanical strain is currently very limited. Here, we study the transport properties of the spin-polarized photocurrent in the flexible Ni-phosphorene-Ni photodetector, which is driven by the photogalvanic effect (PGE) under mechanical tension stress and bending. Broadband PGE photocurrent is generated at zero bias under the illumination of linearly polarized light due to the broken inversion symmetry of the photodetector. Remarkable spin-transport performances including the fully spin-polarized photocurrent, perfect spin-valve effect, and enhanced pure spin current are generated in a broad visible range by applying appropriate mechanical tension stress or bending. Our results indicate that the PGE-driven phosphorene-based photodetector has promising applications in flexible and low-power spintronic devices.

Core@shell and lateral heterostructures composed of SnS and NbS2

The spatial arrangement of heterostructures based on two-dimensional layered materials is important in controlling their electronic and optoelectronic properties. In this contribution, by controlling the reaction kinetics and thus the nucleation and growth sequence of p-type SnS and metallic NbS2, controllable preparation of both SnS@NbS2 core@shell and SnS/NbS2 lateral heterostructures was realized. The SnS@NbS2 core@shell heterostructures were further applied in photodetectors, and interestingly, a negative photoresponse was observed due to the Seebeck effect exerted on the NbS2 shell. Compared with the pure metallic NbS2, the SnS@NbS2 core@shell heterostructures showed a 15 times increased signal-to-noise ratio and much improved photocurrent stability, largely due to the charge and heat transfer between the SnS core and NbS2 shell.

Oriented Attachment: From Natural Crystal Growth to a Materials Engineering Tool

ConspectusIntuitively, chemists see crystals grow atom-by-atom or molecule-by-molecule, very much like a mason builds a wall, brick by brick. It is much more difficult to grasp that small crystals can meet each other in a liquid or at an interface, start to align their crystal lattices and then grow together to form one single crystal. In analogy, that looks more like prefab building. Yet, this is what happens in many occasions and can, with reason, be considered as an alternative mechanism of crystal growth. Oriented attachment is the process in which crystalline colloidal particles align their atomic lattices and grow together into a single crystal. Hence, two aligned crystals become one larger crystal by epitaxy of two specific facets, one of each crystal. If we simply consider the system of two crystals, the unifying attachment reduces the surface energy and results in an overall lower (free) energy of the system. Oriented attachment often occurs with massive numbers of crystals dispersed in a liquid phase, a sol or crystal suspension. In that case, oriented attachment lowers the total free energy of the crystal suspension, predominantly by removal of the nanocrystal/liquid interface area. Accordingly, we should start by considering colloidal suspensions with crystals as the dispersed phase, i.e., "sols", and discuss the reasons for their thermodynamic (meta)stability and how this stability can be lowered such that oriented attachment can occur as a spontaneous thermodynamic process. Oriented attachment is a process observed both for charge-stabilized crystals in polar solvents and for ligand capped nanocrystal suspensions in nonpolar solvents. In this last system different facets can develop a very different reactivity for oriented attachment. Due to this facet selectivity, crystalline structures with very specific geometries can be grown in one, two, or three dimensions; controlled oriented attachment suddenly becomes a tool for material scientists to grow architectures that cannot be reached by any other means. We will review the work performed with PbSe and CdSe nanocrystals. The entire process, i.e., the assembly of nanocrystals, atomic alignment, and unification by attachment, is a very complex and intriguing process. Researchers have succeeded in monitoring these different steps with in situ wave scattering methods and real-space (S)TEM studies. At the same time coarse-grained molecular dynamics simulations have been used to further study the forces involved in self-assembly and attachment at an interface. We will briefly come back to some of these results in the last sections of this review.