Interfacial synergy between dispersed Ru sub-nanoclusters and porous NiFe layered double hydroxide on accelerated overall water splitting by intermediate modulation

Impact of Anchoring Groups on the Photocatalytic Performance of Iridium(III) Complexes and Their Toxicological Analysis

Three different iridium(III) complexes, labelled as Ir1-Ir3, each bearing a unique anchoring moiety (diethyl [2,2'-bipyridine]-4,4'-dicarboxylate, tetraethyl [2,2'-bipyridine]-4,4'-diylbis(phosphonate), or [2,2'-biquinoline]-4,4'-dicarboxylic acid), were synthesized to serve as photosensitizers. Their electrochemical and photophysical characteristics were systematically investigated. ERP measurements were employed to elucidate the impact of the anchoring groups on the photocatalytic hydrogen generation performance of the complexes. The novel iridium(III) complexes were integrated with platinized TiO2 (Pt-TiO2) nanoparticles and tested for their ability to catalyze hydrogen production under visible light. A H2 turnover number (TON) of up to 3670 was obtained upon irradiation for 120 h. The complexes with tetraethyl [2,2'-bipyridine]-4,4'-diylbis(phosphonate) anchoring groups were found to outperform those bearing other moieties, which may be one of the important steps in the development of high-efficiency iridium(III) photosensitizers for hydrogen generation by water splitting. Additionally, toxicological analyses found no significant difference in the toxicity to luminescent bacteria of any of the present iridium(III) complexes compared with that of TiO2, which implies that the complexes investigated in this study do not pose a high risk to the aquatic environment compared to TiO2.

Doping Ru on FeNi LDH/FeII/III-MOF heterogeneous core-shell structure for efficient oxygen evolution

Noble metal-based catalysts such as RuO2 and IrO2 are widely used in the catalysis of the OER. However, because of their high price and poor stability, it is urgent to develop transition metal-based electrocatalysts with low precious metal doping as an alternative. Layered double hydroxides (LDHs) grown on 3D metal-organic frameworks (MOFs) are ideal for doping precious metals owing to abundant defects at the heterointerface, large surface area, and intrinsic oxygen evolution activity. In this study, a novel FeNi LDH/MOF heterostructure was prepared via a two-step solvothermal method using Fe-soc-MOFs as the substrate. Subsequently, Ru was introduced through a hydrothermal process. The as-synthesized Ru@FeNi LDH/MOF has an overpotential of only 242 mV at a current density of 10 mA cm-2 and can be used in continuous electrolysis for 48 h. Its unique nanocubic core-shell structure and flower-like LDHs on its surface provide a large number of active sites, which become the key to ensuring high activity and stability. With the doping of Ru, the electronic structure was adjusted and electron transfer was accelerated, further improving electrochemical activity. This study provides a new idea for developing transition metal-based catalysts with low noble metal loading.

Acenaphthenediimine complex-bridged porphyrin porous organic polymer with enriched active sites as a robust water splitting electrocatalyst

To realize efficient water splitting, a highly promising hydrogen evolution reaction (HER) electrocatalyst is needed for the generation of hydrogen. Herein, we demonstrate a novel acenaphthenediimine complex-bridged porphyrin porous organic polymer (NiTAPP-NiACQ) with enriched active metal sites and hierarchical pores. The as-prepared NiTAPP-NiACQ exhibits good long-term durability and remarkable HER performance in 1.0 M KOH with a low overpotential of 117 mV at 10 mA cm-2, which is comparable to many previously reported electrocatalytic HER systems. Furthermore, a simple water-alkali electrolyzer using NiTAPP-NiACQ as the cathode requires a small cell voltage of 1.59 V to deliver a current density of 10 mA cm-2 at room temperature, along with outstanding durability. NiTAPP-NiACQ features not only a metal ion as the catalytic active center in the porphyrin core but also metal ion coordination on the anthraquinone component to promote HER performance, enabling multiple metal ions as the electrocatalytic active sites for the HER reaction. The excellent HER activity of NiTAPP-NiACQ is ascribed to a combination of mechanisms. These findings highlight the viability of porphyrin-derived porous organic polymers in energy conversion processes.

GQD@NiFe-LDH Nanosheets for Photocatalytic Activity towards Textile Dye Degradation via Lattice Contraction

The functionalized NiFe-LDH with photosensitized GQDs were synthesized through the hydrothermal route by differing the amount of GQDs solution and studied its efficacy towards the mineralization of textile dyes under visible light. The synthesized samples were characterized by XRD, FESEM, HRTEM, DRUV-Vis, RAMAN, XPS, and BET. The combined effect of the hexagonal carbon lattice in GQD and open layered porous structure of NiFe-LDH nanosheets results in the contraction of the lattice. Different reactive and conventional dyes were taken as representative dyes to evaluate the activity of the as-synthesized photocatalysts. The enhanced electron absorption/donor effect between GQDs and NiFe-LDH, and the growth of oxygen-bridged Ni/Fe-C moieties enable the composite to exhibit better photocatalytic activity. Both photocatalytic activity and characterization results confirmed that the GQD@NiFe-LDH nanocomposite heterostructure synthesized at 160 °C by taking 10 mL of GQDs aqueous solution named GNFLDH10 has a higher degree of crystallinity and has the best photocatalytic efficiency compared to other reported visible light catalysts. Specifically, the above optimized GQD@NiFe-LDH photocatalyst is capable of photo-mineralizing 50 ppm of Reactive Green in 20 min, Reactive Red in 20 min, and Congo Red in 25 min respectively following a direct Z-scheme mechanism with substantial reusability.

Synergistic effects boosting hydrogen evolution performance of transition metal oxides at ultralow Ru loading levels

In this study, ultralow ruthenium nanoparticles on the nickel molybdate nanorods grown on nickel foam (Ru-NiMoO₄-NF) were synthesized. The Ru-NiMoO₄-NF exhibited outstanding hydrogen evolution reaction performances in alkaline with overpotential of 52 mV at the current density of 10 mA cm^-2. And, it maintains excellent stability for 20 h at the current density of 20 mA cm^-2. The mass activity of Ru-NiMoO₄-NF is 0.21 A mg_Ru ^-1, which is higher than that of Pt/C. Lots of exposed heterojunction interfaces and synergistic effects between Ru nanoparticles and NiMoO₄ nanorods were regarded as the reasons for excellent performance. This work provides an innovative route for developing low-cost catalysts based on the transition metal oxides and trace precious metal with unique heterostructures for hydrogen production through water splitting.

Effect of Cooperative Redox Property and Oxygen Vacancies on Bifunctional OER and HER Activities of Solvothermally Synthesized CeO2/CuO Composites

Herein, we report the synthesis of the CeO₂/CuO composite as a bifunctional oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) electrocatalyst in a basic medium. The electrocatalyst with an optimum 1:1 CeO₂/CuO shows low OER and HER overpotentials of 410 and 245 mV, respectively. The Tafel slopes of 60.2 and 108.4 mV/dec are measured for OER and HER, respectively. More importantly, the 1:1 CeO₂/CuO composite electrocatalyst requires only a 1.61 V cell voltage to split water to achieve 10 mA/cm² in a two-electrode cell. The role of oxygen vacancies and the cooperative redox activity at the interface of the CeO₂ and CuO phases is explained in the light of Raman and XPS studies, which play the determining factor for the enhanced bifunctional activity of the 1:1 CeO₂/CuO composite. This work provides guidance for the optimization and design of a low-cost alternative electrocatalyst to replace the expensive noble-metal-based electrocatalyst for overall water splitting.

Ce-Modified Flowerlike NiFe-MOF Nanostructure Based on Ion Competitive Coordination for Enhancing the Oxygen Evolution Reaction

Metal-organic framework (MOF) has become a popular electrocatalyst for the oxygen evolution reaction (OER) because of its large specific surface area and adjustable porosity. Nevertheless, the electrochemical performance of MOFs has been greatly limited by poor intrinsic conductivity and catalytic activity. Herein, we report a Ce-doped nanoflower-like MOF material Ce@NiFe-MOF-5 via a facile ion competitive coordination effect and doping method. Benefiting from the nanoflower structure formed by the stacking of nanosheets, a large number of active sites can be exposed, which favors electron/mass transfer during water oxidation. The coordination substitution of Ce ions not only promoted an increase in the number of active sites on the surface of the nanosheets but also optimized the electronic structure of pristine NiFe-MOF. The well-designed Ce@NiFe-MOF-5 catalysts exhibited superior OER performance under basic conditions, which only required an overpotential of 258 mV at a current density of 10 mA cm^-2 and a Tafel slope of 54.44 mV dec^-1. Moreover, when Ce@NiFe-MOF-5 served as an anode and Pt/C as a cathode, the two-electrode system only needed 1.56 V to drive overall water splitting at 10 mA cm^-2.

Adsorption performance of tetracycline on NiFe layered double hydroxide hollow microspheres synthesized with silica as the template

Tetracycline (TC) has poor degradability and hepatotoxicity which will increase the burden on the aquatic environment when discharged into lakes in large quantities. LDH materials are often used as adsorbents because of their superior surface area and controllability of morphology. Herein, NiFe LDH hollow microspheres (NFHMS) were synthesized by a facile hydrothermal method. The removal of tetracycline by the as-prepared material in an aquatic environment was systematically investigated through comprehensive characterizations. The NFHMS sample presents a larger specific surface area than the two control samples, which contributes to its higher adsorption performance. The adsorption mechanisms of TC on NFHMS is mainly electrostatic adsorption. The fitting results of experimental data coincide well with pseudo-second-order and Weber-Morris models through kinetic simulation. Moreover, the Langmuir model is verified to be more suitable than the Freundlich model in elucidating molecular surface adsorption, and the maximum adsorption capacity of NFHMS obtained from the Langmuir model is 90.9 mg g^-1. Higher temperature is beneficial to improve the adsorption performance, and the adsorption process is spontaneous and endothermic. The initial pH of the solution will affect the adsorption capacity, and the partial neutral condition is more favorable. In addition, NFHMS sample exhibits good stability in cyclic tests. Therefore, NFHMS material is expected to be a very promising adsorbent for treating tetracycline in wastewater.

Ruthenium/Ruthenium oxide hybrid nanoparticles anchored on hollow spherical Copper-Cobalt Nitride/Nitrogen doped carbon nanostructures to promote alkaline water splitting: Boosting catalytic performance via synergy between morphology engineering, electron transfer tuning and electronic behavior modulation

Exploring bi-functional electrocatalysts with excellent activity, good durability, and cost-effectiveness for electrochemical hydrogen and oxygen evolution reactions (HER and OER) in the same electrolyte is a critical step towards a sustainable hydrogen economy. Three main features such as high density of active sites, improved charge transfer, and optimized electronic configuration have positive effects on the electrocatalyst activity. In this context, understanding structure-composition-property relationships and catalyst activity is very important and highly desirable. Herein, for the first time, we present the design and fabrication of novel MOF-derived ultra-small Ru/RuO₂ nanoparticles doped in copper/cobalt nitride (CuCoN) encapsulated in nitrogen-doped nanoporous carbon framework (NC) (Ru/RuO₂/CuCoN@NC). For the synthesize of this nanocomposite, firstly bimetallic Cu-Co/MOF hollow nanospheres are prepared via a facile emulsion-based interfacial reaction method and used as the template for Ru ion doping (Ru-doped Cu-Co/MOF). Then, Ru-doped Cu-Co/MOF precursor during the carbonization/nitridation/cooling process converted to the Ru/RuO₂/CuCoN@NC nanocomposite. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, Ru/RuO₂/CuCoN@NC hollow nanosphere electrocatalyst demonstrates striking catalytic performances under alkaline conditions with a current density of 10 mA cm^-2at low overpotentials of 41 mV for HER and 231 mV for OER, respectively. Moreover, as a bifunctional electrocatalyst for overall water splitting, a two-electrode device needs a voltage of 1.51 V to reach a current density of 10 mA cm^-2. Comprehensive electrochemical studies show that the excellent electrocatalytic performance of the Ru/RuO₂/CuCoN@NC hollow nanosphere could be attributed to the improved physical and chemical properties such as desirable compositional, catalysts uniform dispersion, structural advantages of more exposed active sites, optimized electronic structure, high electrical conductivity, and interfacial synergy effect. This work paves a novel avenue for constructing robust bifunctional electrocatalyst for overall water splitting.

Regulating the Spin State of FeIII Enhances the Magnetic Effect of the Molecular Catalysis Mechanism

Aqueous-phase oxygen evolution reaction (OER) is the bottleneck of water splitting. The formation of the O-O bond involves the generation of paramagnetic oxygen molecules from the diamagnetic hydroxides. The spin configurations might play an important role in aqueous-phase molecular electrocatalysis. However, spintronic electrocatalysis is almost an uncultivated land for the exploration of the oxygen molecular catalysis process. Herein, we present a novel magnetic Fe^III site spin-splitting strategy, wherein the electronic structure and spin states of the Fe^III sites are effectively induced and optimized by the Jahn-Teller effect of Cu²⁺. The theoretical calculations and operando attenuated total reflectance-infrared Fourier transform infrared (ATR FT-IR) reveal the facilitation for the O-O bond formation, which accelerates the production of O₂ from OH^- and improves the OER activity. The Cu₁-Ni₆Fe₂-LDH catalyst exhibits a low overpotential of 210 mV at 10 mA cm^-2 and a low Tafel slope (33.7 mV dec^-1), better than those of the initial Cu₀-Ni₆Fe₂-LDHs (278 mV, 101.6 mV dec^-1). With the Cu²⁺ regulation, we have realized the transformation of NiFe-LDHs from ferrimagnets to ferromagnets and showcase that the OER performance of Cu-NiFe-LDHs significantly increases compared with that of NiFe-LDHs under the effect of a magnetic field for the first time. The magnetic-field-assisted Cu₁-Ni₆Fe₂-LDHs provide an ultralow overpotential of 180 mV at 10 mA cm^-2, which is currently one of the best OER performances. The combination of the magnetic field and spin configuration provides new principles for the development of high-performance catalysts and understandings of the catalytic mechanism from the spintronic level.

Role of Ce in enhanced performance of water oxidation reaction and urea oxidation reaction for NiFe Layered Double Hydroxide

The atomistic doping and surface engineering affords a promising method for improving their electrochemistry performance toward the water oxidation reaction and urea oxidation reaction (UOR) for the layered double hydroxides...

Highly Dispersed Ru Nanoclusters Anchored on B, N Co-doped Carbon Nanotubes for Water Splitting

We developed an N, B co-doped carbon nanotubes as a substrate material to load 2-3 nm uniform Ru clusters. We rationally realized controllable N and B doping into carbon nanotubes....

Ru doping induces the construction of a unique core-shell microflower self-supporting electrocatalyst for highly efficient overall water splitting

Since the large reaction energy barrier caused by multi-step electron transfer processes of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) gravely restricts the practical application of electrocatalytic water splitting, it is urgent to develop a dual-functional electrocatalyst which can effectively reduce the reaction energy barrier and actually speed up the reaction. Herein, the Ru species are doped into the complex of magnetite and FeNi-layered double hydroxide by a one-step oil bath method, and a self-supporting binder-free bifunctional electrocatalyst was synthesized on the surface of iron foam (named Ru-Fe₃O₄@FeNi-LDH/IF). The unique 3D core-shell microflower structure of Ru-Fe₃O₄@FeNi-LDH/IF, the combination of active ingredient and conductive substrate, together with the doping of Ru may immensely provide a large number of active sites, adjust the electronic structure, accelerate electron transfer, and thus greatly improve the electrocatalytic activity and durability. It is worth mentioning that when Ru-Fe₃O₄@FeNi-LDH/IF is used as the anode and cathode for overall water splitting, only 1.52 V battery voltage can generate a current density of 10 mA cm^-2, and also maintain a prominent stability for at least 36 hours. This work provides a feasible strategy for heteroatom-doping LDH as a bifunctional electrocatalyst.

Recent Advances in Layered-Double-Hydroxides Based Noble Metal Nanoparticles Efficient Electrocatalysts

With the energy crisis and environmental pollution becoming more and more serious, it is urgent to develop renewable and clean energy. Hydrogen production from electrolyzed water is of great significance to solve the energy crisis and environmental problems in the future. Recently, layered double hydroxides (LDHs) materials have been widely studied in the electrocatalysis field, due to their unique layered structure, tunable metal species and highly dispersed active sites. Moreover, the LDHs supporting noble metal catalysts obtained through the topotactic transformation of LDHs precursors significantly reduce the energy barrier of electrolyzing water, showing remarkable catalytic activity, good conductivity and excellent durability. In this review, we give an overview of recent advances on LDHs supporting noble metal catalysts, from a brief introduction, to their preparation and modification methods, to an overview of their application in the electrocatalysis field, as well as the challenges and outlooks in this promising field on the basis of current development.

Nickel Foam Supported NiO@Ru Heterostructure Towards High-Efficiency Overall Water Splitting

Electrocatalytic water splitting for hydrogen production from renewable energy requires the innovation of electrocatalysts with high activity and low cost. In this work, densely packed NiO@Ru nanosheets were fabricated on the surface of Ni foam through a two-step method of Ni(OH)₂ growth followed by Ru deposition. Through pair distribution function analysis from selected-area electron diffraction and X-ray photoelectron spectroscopy, the interface structure feature is revealed as a thin layer of perovskite NiRuO₃ sandwiched between NiO and Ru. The electrode exhibits high activity and durability for HER and OER, delivering a current density of 10 mA cm^-2 at a voltage of 1.55 V for overall water splitting in 1 M KOH. The excellent performance can be attributed to the intimate interface contact of NiO and Ru in addition to low charge transfer resistance and super-hydrophilic surface structure, as verified by the electrochemical impedance spectroscopy and contact-angle measurement.

General fabrication of RuM (M = Ni and Co) nanoclusters for boosting hydrogen evolution reaction electrocatalysis

Rational design and fabrication of highly active electrocatalysts toward the hydrogen evolution reaction (HER) are of paramount significance in industrial hydrogen production via water electrolysis. Herein, by taking advantage of the high surface-to-volume ratio, maximized atom-utilization efficiency, and quantum size effect, we have successfully fabricated an innovative class of Ru-based alloy nanoclusters. Impressively, carbon fiber cloth (CFC) supported RuNi nanoclusters could exhibit outstanding electrocatalytic performance toward the HER, in which the optimal composition RuNi/CFC could achieve a current density of 10 mA cm^-2 with an overpotential of merely 43.0 mV in 1 M KOH electrolyte, as well as a low Tafel slope of 30.4 mF dec^-1. In addition to the high HER activity in alkaline media, such Ru-based alloy nanoclusters are also demonstrated to be highly active and stable in acidic solution. Mechanistic studies reveal that the alloying effect facilitates water dissociation and optimizes hydrogen adsorption and desorption, thereby contributing to the outstanding HER performance. This work paves a new way for the rational fabrication of advanced electrocatalysts for boosting the HER.

NiFe Layered-Double-Hydroxide Nanosheet Arrays on Graphite Felt: A 3D Electrocatalyst for Highly Efficient Water Oxidation in Alkaline Media

It is of great importance to rationally design and develop earth-abundant nanocatalysts for high-efficiency water electrolysis. Herein, NiFe layered double hydroxide was in situ grown hydrothermally on a 3D graphite felt (NiFe LDH/GF) as a high-efficiency catalyst in facilitating the oxygen evolution reaction (OER). In 1.0 M KOH, NiFe LDH/GF requires a low overpotential of 214 mV to deliver a geometric current density of 50 mA cm^-2 (η_{50 mA cm^-2} = 214 mV), surpassing that NiFe LDH supported on a 2D graphite paper (NiFe LDH/GP; η_{50 mA cm^-2} = 301 mV). More importantly, NiFe LDH/GF shows good durability at 50 mA cm^-2 within 50 h of OER catalysis testing and delivers a faradaic efficiency of nearly 100% in the electrocatalysis of OER.

Rational Design of Single-Atom Site Electrocatalysts: From Theoretical Understandings to Practical Applications

Atomically dispersed metal-based electrocatalysts have attracted increasing attention due to their nearly 100% atomic utilization and excellent catalytic performance. However, current fundamental comprehension and summaries to reveal the underlying relationship between single-atom site electrocatalysts (SACs) and corresponding catalytic application are rarely reported. Herein, the fundamental understandings and intrinsic mechanisms underlying SACs and corresponding electrocatalytic applications are systemically summarized. Different preparation strategies are presented to reveal the synthetic strategies with engineering the well-defined SACs on the basis of theoretical principle (size effect, metal-support interactions, electronic structure effect, and coordination environment effect). Then, an overview of the electrocatalytic applications is presented, including oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, oxidation of small organic molecules, carbon dioxide reduction reaction, and nitrogen reduction reaction. The underlying structure-performance relationship between SACs and electrocatalytic reactions is also discussed in depth to expound the enhancement mechanisms. Finally, a summary is provided and a perspective supplied to demonstrate the current challenges and opportunities for rational designing, synthesizing, and modulating the advanced SACs toward electrocatalytic reactions.

Nanostructured RuO2-Co3O4@RuCo-EO with low Ru loading as a high-efficiency electrochemical oxygen evolution catalyst

Electrochemical water splitting technology is considered to be the most reliable method for converting renewable energy such as wind and solar energy into hydrogen. Here, a nanostructured RuO₂/Co₃O₄–RuCo-EO electrode is designed via magnetron sputtering combined with electrochemical oxidation for the oxygen evolution reaction (OER) in an alkaline medium. The optimized RuO₂/Co₃O₄–RuCo-EO electrode with a Ru loading of 0.064 mg cm⁻² exhibits excellent electrocatalytic performance with a low overpotential of 220 mV at the current density of 10 mA cm⁻² and a low Tafel slope of 59.9 mV dec⁻¹ for the OER. Compared with RuO₂ prepared by thermal decomposition, its overpotential is reduced by 82 mV. Meanwhile, compared with RuO₂ prepared by magnetron sputtering, the overpotential is also reduced by 74 mV. Furthermore, compared with the RuO₂/Ru with core–shell structure (η = 244 mV), the overpotential is still decreased by 24 mV. Therefore, the RuO₂/Co₃O₄–RuCo-EO electrode has excellent OER activity. There are two reasons for the improvement of the OER activity. On the one hand, the core–shell structure is conducive to electron transport, and on the other hand, the addition of Co adjusts the electronic structure of Ru.

The optimized RuO₂/Co₃O₄–RuCo-EO electrode with Ru loading of 0.064 mg cm⁻² exhibits the excellent oxygen evolution activity with an overpotential of 220 mV at the current density of 10 mA cm⁻² and a Tafel slope of 59.9 mV dec⁻¹.