Zn2+ stabilized Pd clusters with enhanced covalent metal-support interaction via the formation of Pd-Zn bonds to promote catalytic thermal stability

Enhancing the activity of Pd/Zn–Al–O catalysts for esterification of CO to dimethyl oxalate via increasing oxygen defects by tuning the Zn/Al ratio

The enhancement of oxygen defects in the spinel support is the essential reason for the improvement of catalytic activity, which reveals the support effect of catalyst for CO direct esterification to dimethyl oxalate.

Enhanced metal-support interaction between Pd and hierarchical Nb2O5via oxygen defect induction to promote CO oxidative coupling to dimethyl oxalate

Production of ethylene glycol from coal is a particularly interesting route as it is an economic alternative to the petrochemical-based route. In this process, effectively generating dimethyl oxalate (DMO) is a crucial step by CO oxidative coupling reaction under Pd-based catalysts. However, the aggregation of Pd species over the support is still an issue that relates to the deterioration of catalytic activity and stability. To this end, enhancing the metal-support interaction is urgently required. In this work, hierarchical Nb₂O₅ (H-Nb₂O₅) microspheres with abundant oxygen defects were synthesized to anchor the Pd species thus promoting the electron transfer between Pd species and Nb species associated with the generation of interfacial Pd-NbO_x sites. Besides, the thinned electron density of Pd species resulting from the electron-withdrawing effect of Nb species is beneficial for activating the adsorbed CO molecules, leading to superior catalytic activity. The Pd/H-Nb₂O₅ catalyst exhibited 63.1% of CO conversion (theoretical maximum conversion: 64.3%) and 92.9% of DMO selectivity, with a DMO weight time yield of 1297.9 g kg_cat.^-1 h^-1, and remained robust even after 50 h of time on stream evaluation. Current work provides a deep insight into the CO activation mechanism and helps improve the catalytic stability by boosting interfacial electron interaction via oxygen defects induction, and also sheds light on the design and synthesis of high-performance catalysts in other heterogeneous catalysis fields.

Highly-efficient visible-light-driven photocatalytic H2 evolution integrated with microplastic degradation over MXene/ZnxCd1-xS photocatalyst

The development of highly-efficient photocatalyst for H₂ production integrated with microplastic degradation is significant to meet the demand for clean energy and resolve "white pollution". Herein, a series of MXene/Zn_xCd_1-xS photocatalysts were successfully fabricated for H₂ evolution integrated with degradation of polyethylene terephthalate (PET). The resultant photocatalysts exhibited excellent photocatalytic performance, and the best photocatalytic H₂ evolution rate can reach 14.17 mmol·g^-1·h^-1 in alkaline PET alkaline solution. What's more, the PET was also converted to the useful organic micromolecule, including glycolate, acetate, ethanol, etc. The highly-efficient photocatalytic performance of MXene/Zn_xCd_1-xS photocatalysts can be attributed to the enhanced separation ability of photocarriers and optimum band structure with enhanced oxidation capacity of valence band. Finally, the photocatalytic mechanism was investigated in detail. Overall, this work supplied a new useful guidance for solving the energy problem and microplastic pollution issues, simultaneously.

Highly Effective Pd/MgO/γ-Al2O3 Catalysts for CO Oxidative Coupling to Dimethyl Oxalate: The Effect of MgO Coating on γ-Al2O3

The support of MgO/γ-Al₂O₃ was initially prepared by a multiple impregnation method and Pd was placed on the surface of the MgO/γ-Al₂O₃ support via incipient wetness impregnation. Pd/MgO/γ-Al₂O₃ (Pd/MAO) catalysts were systematically characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), CO₂-temperature-programmed desorption (TPD), transmission electron microscopy (TEM), CO-Fourier transform infrared (CO-FTIR), and X-ray photoelectron spectroscopy (XPS) and tested in the CO oxidative coupling to dimethyl oxalate (DMO) reaction. Compared to Pd/γ-Al₂O₃, the catalytic activities of the Pd/MAO catalysts improved significantly. The Pd/MAO catalyst with a 30% mass ratio of Mg to γ-Al₂O₃ delivers 3 times higher STY of DMO than that of Pd/γ-Al₂O₃. It has been demonstrated that MgO covered γ-Al₂O₃ layer-by-layer forming MAO supports, which can increase surface basicity and the interaction between Pd particles and the MAO supports. Moreover, the relationship between metal and support interaction and catalytic performance was discussed.

Boosting Interfacial Electron Transfer between Pd and ZnTi-LDH via Defect Induction for Enhanced Metal-Support Interaction in CO Direct Esterification Reaction

Strong metal-support interaction is crucial to the stability of catalysts in heterogeneous catalysis. However, reports on boosting interfacial electron transfer between metal and support via defect induction for enhanced metal-support interaction are limited. In this work, ultrathin reducible ZnTi-layered double hydroxide (LDH) nanosheets with rich oxygen defects were synthesized to stabilize Pd clusters, and the rich oxygen defects promoted Pd cluster bonding with Zn and Ti atoms in supports, thereby forming a metal-metal bond. Electron spin resonance (ESR), X-ray absorption fine spectra (XAFS), and density functional theory (DFT) calculations demonstrate remarkable interfacial electron transfer (0.62 e). The Pd/ZnTi-LDH catalyst shows superior catalytic stability for CO direct esterification to dimethyl oxalate. By contrast, the nonreducible Pd/ZnAl-LDH catalyst with a few oxygen defects shows minimal interfacial electron transfer (0.08 e), which leads to relatively poor catalytic stability. This work provides a deep insight into promoting the stability of catalysts by boosting interfacial electron transfer via defect induction.

Atomically dispersed Rh-doped NiFe layered double hydroxides: precise location of Rh and promoting hydrazine electrooxidation properties

Noble metal-based catalysts have attracted huge attention owing to their intriguing activity and selectivity. Revealing noble metal active sites and keeping them in a form of stable and high loading are crucial to improving the catalytic performance and understanding the reaction mechanism. Herein, a feasible preparation method was used to synthesize a Rh-based ultrathin NiFe layered double hydroxide (Rh/NiFe). The detailed study proved that the existence form of Rh atoms is atomically dispersed. Moreover, extended X-ray absorption fine structure (EXAFS) with theoretical calculation of X-ray absorption near-edge structure (XANES) and density functional theory (DFT) were used to identify at the atomic level the precise location and coordination environment of the introduced Rh atoms. It was found that Rh atoms are doped in the LDH layer in a coplanar position with Ni and Fe atoms. With a 5.4 wt% loading amount of Rh, the modified catalyst of Rh/NiFe-5.4 requires 80 mV less than unmodified ultrathin NiFe layered double hydroxide (NiFe) for hydrazine electrooxidation. The XAFS fitting revealed that the doping of Rh atoms results in the distortion of the laminate and then introduces certain defects, which may be attributed to electron transport, thus endowing them with exceptional electrocatalytic performance.