Cobalt doping of FePS3 promotes intrinsic active sites for the efficient hydrogen evolution reaction

CoPS/Co4S3 Heterojunction with Highly Exposed Active Sites and Dual-site Synergy for Effective Hydrogen Evolution Reactions

Cobalt phosphosulphide (CoPS) has recently been recognized as a potentially effective electrocatalyst for the hydrogen evolution reaction (HER). However, there have been no research on the design of CoPS-based heterojunctions to boost their HER performance. Herein, CoPS/Co4S3 heterojunction was prepared by phosphating treatment based on defect-rich flower-like Co1-xS precursors. The high specific surface area of nanopetals, together with the heterojunction structure with inhomogeneous strain, exposes more active sites in the catalyst. The electronic structure of the catalyst is reconfigured as a result of the interfacial interactions, which promote the catalyst's ability to adsorb hydrogen and conduct electricity. The synergistic effect of the Co and S dual-site further enhance the catalytic activity. The catalyst has overpotentials of 61 and 70 mV to attain a current density of 10 mA cm-2 in acidic and alkaline media, respectively, which renders it competitive with previously reported analogous catalysts. This work proposes an effective technique for constructing transition metal phosphosulfide heterojunctions, as well as the development of an efficient HER electrocatalyst.

XPS Analysis of FexNiyPS3 vdW Materials Used in the Hydrogen Evolution Processes

In response to the global demand for sustainable energy solutions, the quest for stable and cost-effective hydrogen production has garnered significant attention in recent decades. Here, the emergence of layered metal phosphorus trichalcogenides (MPX3, M: transition metal, X: chalcogen) materials and their two-dimensional counterparts with customizable composition and electronic structure holds great promise for such purposes. In the present study, we successfully synthesized large-scale and high-quality FePS3, NiPS3, and an alloyed counterpart, Fe0.5Ni0.5PS3. Subsequent systematic investigations were conducted to probe their respective electronic structures and assess their hydrogen evolution reaction (HER) properties. Remarkably, our results unveiled the successful modulation of the bandgap for FexNiyPS3, ultimately bestowing it with the most favorable HER performance for Fe0.5Ni0.5PS3 when compared to the other two samples. Furthermore, our exploration into the evolution of the X-ray photoelectron spectroscopy (XPS) spectra demonstrated that the charge conversions of metal cations play a pivotal role in the HER reactions. This critical insight further enriches our understanding of the fundamental mechanisms governing the performance of the prepared layered MPX3-based electrocatalysts, thus facilitating a comprehensive and detailed analysis of the pre- and post-HER reactions. This work not only sheds light on the intricate interplay between composition, electronic structure, and catalytic performance in the realm of novel electrocatalysts, but also contributes to the broader scientific community's pursuit of sustainable and efficient hydrogen production.

Computational screening of layered metal chalcogenide materials for HER electrocatalysts, and its synergy with experiments

Layered materials have emerged as attractive candidates in our search for abundant, inexpensive and efficient hydrogen evolution reaction (HER) catalysts, due to larger specific area these offer. Among these, transition metal dichalcogenides have been studied extensively, while ternary transition metal tri-chalcogenides have emerged as promising candidates recently. Computational screening has emerged as a powerful tool to identify the promising materials out of an initial set for specific applications, and has been employed for identifying HER catalysts also. This article presents a comprehensive review of how computational screening studies based on density functional calculations have successfully identified the promising materials among the layered transition metal di- and tri-chalcogenides. Synergy of these computational studies with experiments is also reviewed. It is argued that experimental verification of the materials, predicted to be efficient catalysts but not yet tested, will enlarge the list of materials that hold promise to replace expensive platinum, and will help ushering in the much awaited hydrogen economy.

Electrostatic co-assembly of FePS3 nanosheets and surface functionalized BCN heterostructures for hydrogen evolution reaction

Advances in the hydrogen evolution reaction (HER) are intricately connected with addressing the current energy crisis and quest for sustainable energy sources. The necessity of catalysts that are efficient and inexpensive to perform the hydrogen evolution reaction is key to this. Following the ground-breaking discovery of graphene, metal thio/seleno phosphates (MPX3: M - transition metal, P - phosphorus and X - S/Se), two dimensional (2D) materials, exhibit excellent tunable physicochemical, electronic and optical properties, and are expected to be key to the energy industry for years to come. Taking this into account, a facile time-effective electrostatic restacking synthesis procedure has been followed to synthesize a 2D/2D heterostructure (FePS3@BCN) involving FePS3, one of the prominent MPX3 materials, with borocarbonitride (BCN), for hydrogen evolution reaction (HER). The piled up nanosheets of FePS3 and BCN are held together by an electrostatic force, and display extreme robustness under the harsh conditions of HER application. The amalgamated electrocatalyst achieved an overpotential of 187 mV at a current density of 10 mA cm-2 with a shallow Tafel slope of 41 mV dec-1, following the Volmer-Heyrovsky mechanism. The resilience of the electrocatalyst has been examined through chronoamperometric testing for long term stability, and it is stable for more than 14 hours, which shows the excellent electrocatalytic activity for hydrogen evolution reaction owing to the strategic approach to the catalyst design, the use of numerous electrochemically active sites, large surface area and a barrier-free channel for quick ion transfer.

Application of density functional theory to study the electronic structure and magnetic behavior of clusters MnPS3 (M = Fe, Co, Ni; n = 0 ~ 3)

CONTEXT

The article explores and compares the electronic structure and magnetic properties of transition metal phosphate materials, namely FePS₃, CoPS₃, and NiPS₃.

RESEARCH FINDINGS

Analysis of the optimized configuration reveals significant insights into the electronic properties of M_nPS₃ clusters. Electrons within the cluster exhibit a flow from the metal atom M and the non-metal atom P to the non-metal atom S. The S atom serves as the primary site for electrophilic reactions within the cluster, while the metal atom hosts the main site for nucleophilic reactions. Configurations 2a⁽²⁾, 2b⁽²⁾, 3a⁽⁴⁾, 3b⁽³⁾, and 3c⁽²⁾ exhibit enhanced electron mobility and optimal electronic properties. Moreover, the analysis of the magnetic properties of the optimized configurations demonstrates that the magnetic behavior of M_nPS₃ clusters is influenced by the spin motion of α electrons in the p orbital. Metal atoms make a relatively significant contribution to the magnetic properties of M_nPS₃ clusters. Configurations 1b⁽³⁾, 2c⁽⁴⁾, and 3a⁽⁴⁾ exhibit comparatively higher magnetic properties compared to other configurations of the same size. This study identifies the optimal configuration for the magnetic and electronic properties of transition metal phosphorothioate materials. It also elucidates the trends in magnetic and electronic properties as the number of metal atoms varies, thereby providing valuable theoretical support for the application of these materials in the fields of magnetic materials and electronic devices.

METHODS

In this study, the Fe-based transition elements, namely Fe, Co, and Ni, are selected as the metal atoms M. The cluster MPS₃ is used to simulate the local structure of the material, allowing for an investigation into the influence of the metal atoms on its electronic and magnetic properties. By increasing the number of metal atoms and expanding the cluster size, the variations in these properties are explored. Density functional theory (DFT) calculations are performed using the B3LYP functional within the Gaussian09 software package. The M_nPS₃ cluster is subjected to optimal calculations and vibrational analysis at the def2-tzvp quantization level, resulting in optimized configurations with different spin multiplet degrees. Quantum chemistry software GaussView, wave function analysis software Multiwfn, and plotting software Origin are utilized for data characterization and graphical representation of the magnetic and electronic properties of the optimized configurations. Through the employment of these computational tools, valuable insights into the magnetic and electronic properties of the M_nPS₃ cluster and its dependency on different metal atoms are obtained.

Recent Progress in Metal Phosphorous Chalcogenides: Potential High-Performance Electrocatalysts

Since the discovery of graphene, research on the family of 2D materials has been a thriving field. Metal phosphorous chalcogenides (MPX₃ ) have attracted renewed attention due to their distinctive physical and chemical properties. The advantages of MPX₃ , such as tunable layered structures, unique electronic properties, thermodynamically appropriate band alignments and abundant catalytic active sites on the surface, make MPX₃ material great potential in electrocatalysis. In this review, the applications of MPX₃ electrocatalysts in recent years, including hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction, are summarized. Structural regulation, chemical doping and multi-material composite that are often effective and practical research methods to further optimize the catalytic properties of these materials, are introduced. Finally, the challenges and opportunities for electrocatalytic applications of MPX₃ materials are discussed. This report aims to advance future efforts to develop MPX₃ and related materials for electrocatalysis.

Phosphorus-modified cobalt single-atom catalysts loaded on crosslinked carbon nanosheets for efficient alkaline hydrogen evolution reaction

Efficient and low-cost transition metal single-atom catalysts (TMSACs) for hydrogen evolution reaction (HER) have been recognized as research hotspots recently with advances in delivering good catalytic activity without noble metals. However, the high-cost complex preparation of TMSACs and insufficient stability limited their practical applications. Herein, a simple top-down pyrolysis approach to obtain P-modified Co SACs loaded on the crosslinked defect-rich carbon nanosheets was introduced for alkaline hydrogen evolution, where Co atoms are locally confined before pyrolysis to prevent aggregation. Thereby, the abundant defects and the unsaturated coordination formed during the pyrolysis significantly improved the stability of the monatomic structure and reduced the reaction barrier. Furthermore, the synergy between cobalt atoms and phosphorus atoms was established to optimize the decomposition process of water molecules, which delivers the key to promoting the slow reaction kinetics of alkaline HER. As the result, the cobalt SAC exhibited excellent catalytic activity and stability for alkaline HER, with overpotentials of 70 mV and 192 mV at current densities of -10 mA cm^-2 and -100 mA cm^-2, respectively.

Facile Solvent-Free Synthesis of Metal Thiophosphates and Their Examination as Hydrogen Evolution Electrocatalysts

The facile solvent-free synthesis of several known metal thiophosphates was accomplished by a chemical exchange reaction between anhydrous metal chlorides and elemental phosphorus with sulfur, or combinations of phosphorus with molecular P2S5 at moderate 500 °C temperatures. The crystalline products obtained from this synthetic approach include MPS3 (M = Fe, Co, Ni) and Cu3PS4. The successful reactions benefit from thermochemically favorable PCl3 elimination. This solvent-free route performed at moderate temperatures leads to mixed anion products with complex heteroatomic anions, such as P2S64−. The MPS3 phases are thermally metastable relative to the thermodynamically preferred separate MPx/ MSy and more metal-rich MPxSy phases. The micrometer-sized M-P-S products exhibit room-temperature optical and magnetic properties consistent with isolated metal ion structural arrangements and semiconducting band gaps. The MPS3 materials were examined as electrocatalysts in hydrogen evolution reactions (HER) under acidic conditions. In terms of HER activity at lower applied potentials, the MPS3 materials show the trend of Co > Ni >> Fe. Extended time constant potential HER experiments show reasonable HER stability of ionic and semiconducting MPS3 (M = Co, Ni) structures under acidic reducing conditions.

Crystalline-Amorphous Interfaces Coupling of CoSe2 /CoP with Optimized d-Band Center and Boosted Electrocatalytic Hydrogen Evolution

Amorphous and heterojunction materials have been widely used in the field of electrocatalytic hydrogen evolution due to their unique physicochemical properties. However, the current used individual strategy still has limited effects. Hence efficient tailoring tactics with synergistic effect are highly desired. Herein, the authors have realized the deep optimization of catalytic activity by a constructing crystalline-amorphous CoSe₂ /CoP heterojunction. Benefiting from the strong electronic coupling at the interfaces, the d-band center of the material moves further down compared to its crystalline-crystalline counterpart, optimizing the valence state and the H adsorption of Co and lowering the kinetic barrier of hydrogen evolution reaction (HER). The heterojunction shows an overpotential of 65 mV to drive a current density of 10 mA cm^-2 in the acidic medium. Besides, it also shows competitive properties in both neutral and basic media. This work provides inspiration for optimizing the catalytic activity through combining a crystalline and amorphous heterojunction, which can be implemented for other transition metal compound electrocatalysts.

Reversed Active Sites Boost the Intrinsic Activity of Graphene-like Cobalt Selenide for Hydrogen Evolution

Optimizing the hydrogen adsorption Gibbs free energy (ΔG_H ) of active sites is essential to improve the overpotential of the electrocatalytic hydrogen evolution reaction (HER). We doped graphene-like Co_0.85 Se with sulfur and found that the active sites are reversed (from cationic Co sites to anionic S sites), which contributed to an enhancement in electrocatalytic HER performance. The optimal S-doped Co_0.85 Se composite has an overpotential of 108 mV (at 10 mA cm^-2 ) and a Tafel slope of 59 mV dec^-1 , which exceeds other reported Co_0.85 Se-based electrocatalysts. The doped S sites have much higher activity than the Co sites, with a hydrogen adsorption Gibbs free energy (ΔG_H ) close to zero (0.067 eV), which reduces the reaction barrier for hydrogen production. This work provides inspiration for optimizing the intrinsic HER activity of other related transition metal chalcogenides.

Precious metals recovery from aqueous solutions using a new adsorbent material

Platinum group metals (PGMs) palladium, platinum, and ruthenium represent the key materials for automotive exhaust gas treatment. Since there are no adequate alternatives, the importance of these metals for the automotive industry is steadily rising. The high value of PGMs in spent catalysts justifies their recycling. Therefore, it is really important to recovery platinum group metals from aqueous solutions. Of the many PGMs recovery procedures, adsorption is a process with a good efficiency, but an important role is played by the adsorbent material used into the process. In order to improve the adsorption properties of materials were developed new methods for chemical modification of the solid supports, through functionalization with different extractants. In present paper a new adsorbent material (Chitosan-DB18C6) was used for PGMs recovery. The new adsorbent material was produced by impregnating Chitosan with dibenzo-18-crown-6-ether using Solvent Impregnated Resin (SIR) method. The crown ethers were chosen as extractant due to their known ability to bind metallic ions, whether they are symmetrically or unsymmetrically substituted. In order to determine the PGMs recovery efficiency for new prepared adsorbent material the equilibrium and kinetic studies were performed. Also, to study the PGMs adsorption mechanism the experimental data were modelled using pseudo-first-order and pseudo-second order kinetic models. Experimental data were fitted with three equilibrium isotherm models: Langmuir, Freundlich and Sips. The results proved that new adsorbent material (Chitosan-DB18C6) is an efficient adsorbent for PGMs recovery from aqueous solutions.

NiSe2/CdS composite nanoflakes photocatalyst with enhanced activity under visible light

Degrading organic pollutants using a photocatalyst under visible light is one of the effective ways to solve the increasingly serious environmental pollution problem. In this work, we have loaded a small amount of NiSe₂ nanoflakes on the surface of CdS using a simple and low-cost solvothermal synthesis method. The samples were characterized with detailed X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), photocurrent, photoluminescence spectrometer (PL), photocatalytic properties, etc. The results show that a 2 mol% load of NiSe₂ increases the rate of degradation of Rhodamine B (RhB) to more than twice the original rate (0.01000 min⁻¹versus 0.00478 min⁻¹). Meanwhile, the sample has excellent stability. The improved photocatalytic properties can be attributed to the face-to-face contact between the nanoflakes, accelerated separation and transfer of photon-generated carriers. This work provides a suitable co-catalyst that can be used to optimize the performance of other photocatalytic materials.

The obtained NiSe₂/CdS composite nanoflakes exhibit greatly enhanced photocatalytic properties due to the accelerated separation of photon-generated carriers.