Metal Organic Framework steered electrosynthesis of anisotropic gold nanorods for specific sensing of organophosphate pesticides in vegetables collected from the field

Zr-based metalloporphyrin MOF probe for electrochemical detection of parathion-methyl

An electrochemical (EC) sensor based on metalloporphyrin metal-organic framework (MOF) for the detection of parathion-methyl (PM) has been developed. The prepared MOF-525(Fe) exhibits great signal enhancement toward the electrochemical detection of PM owing to its unique structural properties and electrochemical activities. Under optimal experimental conditions, the as-prepared MOF-525(Fe) based EC sensor exhibited excellent PM sensing performance with a wide linear detection range (0.1 μM-100 μM) and low limit of detection (LOD, 1.4 nM). Compared to its corresponding Fe metalloporphyrin (linker), MOF-525(Fe) exhibited a superior sensitivity (28.31 μA cm-2·μM-1), which is 3.7 times higher than the sensitivity of FeTCPP linker (7.56 μA cm-2·μM-1) towards PM. The improved performance is associated with the high specific surface area and the large pore channels of MOF-525(Fe) facilitating a better interaction between PM and the Fe metalloporphyrin active sites, especially in the lower concentration range. Moreover, a possible affinity of the PM molecules toward Zr6 clusters may also contribute to the selective enrichment of PM on MOF-525(Fe). This EC sensor further demonstrated high selectivity in the presence of interfering molecules. The recovery results further confirm accurate PM sensing in actual samples, which suggests promising applications for the rapid detection of environmental organophosphates by metalloporphyrin MOFs.

Recent progress and perspectives of metal organic frameworks (MOFs) for the detection of food contaminants

Over the past decades, increasing research in metal-organic frameworks (MOFs) being a large family of highly tunable porous materials with intrinsic physical properties, show propitious results for a wide range of applications in adsorption, separation, electrocatalysis, and electrochemical sensors. MOFs have received substantial attention in electrochemical sensors owing to their large surface area, active metal sites, high chemical and thermal stability, and tunable structure with adjustable pore diameters. Benefiting from the superior properties, MOFs and MOF-derived carbon materials act as promising electrode material for the detection of food contaminants. Although several reviews have been reported based on MOF and its nanocomposites for the detection of food contaminants using various analytical methods such as spectrometric, chromatographic, and capillary electrophoresis. But there no significant review has been devoted to MOF/and its derived carbon-based electrodes using electrochemical detection of food contaminants. Here we review and classify MOF-based electrodes over the period between 2017 and 2022, concerning synthetic procedures, electrode fabrication process, and the possible mechanism for detection of the food contaminants which include: heavy metals, antibiotics, mycotoxins, and pesticide residues. The merits and demerits of MOF as electrode material and the need for the fabrication of MOF and its composites/derivatives for the determination of food contaminants are discussed in detail. At last, the current opportunities, key challenges, and prospects in MOF for the development of smart sensing devices for future research in this field are envisioned.

Visual evaluation of acetylcholinesterase inhibition by an easy-to-operate assay based on N-doped carbon nanozyme with high stability and oxidase-like activity

Acetylcholinesterase (AChE) is the key enzyme associated with neurotransmission, and thus many drugs have been explored for their inhibitory effect on AChE, such as donepezil for Alzheimer's disease and organophosphorus pesticides (OPs). Compared with clinical trials, in vitro screening bioassays for AChE inhibitors are preferable in terms of operability and cost. Herein, we developed an easy-to-operate nanozyme-based colorimetric assay for the evaluation of AChE inhibitory strength with excellent anti-interference ability and low dependence on professional equipment. The metal-free carbon nanozyme NC900 played an important role in the signal output due to its features of efficient oxidase-like activity, excellent water dispersibility, high stability and low color interference. Employing various AChE-targeted or non-targeted pesticides as examples, the as-proposed assay exhibited excellent distinguishing ability for different chemicals. The higher absorption intensity at 652 nm represents a stronger inhibitory effect, as well as blue color. In addition, this method was used to study the influence of pH on the degradation of prodrugs, and the efficiency of mixed pesticides. This work provides a simple and reliable assay to screen AChE inhibitors, which is promising for the preliminary evaluation of a large number of potential candidates.

Acetylcholinesterase-Cu3(PO4)2 hybrid nanoflowers for electrochemical detection of dichlorvos using square-wave voltammetry

Immobilization of enzymes is one of the key steps in the development of high-performance enzymatic electrochemical biosensors, and various nanostructured materials have been designed and developed to achieve this goal. Herein, hybrid nanoflowers (HNFs) were synthesized using acetylcholinesterase (AChE) as an organic component and copper phosphate (Cu₃(PO₄)₂) as an inorganic component. These AChE-Cu₃(PO₄)₂ HNFs exhibit a three-dimensional hierarchical flower-like structure, which not only has a large specific surface area but also promotes the affinity between AChE and its substrate with better catalytic activity. Not only that, the surface modification of the glassy carbon electrode (GCE) by the joint use of gold nanoparticles (AuNPs) and graphene oxide (GO) extended the electroactive area. Using square-wave voltammetry (SWV), the as-prepared biosensor (i.e., AChE-Cu₃(PO₄)₂ HNF/AuNP/GO/GCE) demonstrated superior sensing performance in the detection of dichlorvos. The detection limit is as low as 0.07 pM, and the linear detection range can range from 0.5 pM to 10 μM. In addition, the biosensor was feasible in real agricultural samples with satisfactory recoveries (98.65% to 103.43%). The reported biosensor provides an alternative tool for the direct measurements of AChE activity and its inhibition. Besides organophosphorus pesticides represented by dichlorvos, this biosensor has the potential to detect other AChE inhibitors, such as carbamate pesticides, drugs for Alzheimer's disease, etc., thus having broader applications in food safety and drug screening.

Surfactant stabilized gold nanomaterials for environmental sensing applications - A review

Surfactant stabilized Gold (Au) nanomaterials (NMs) have been documented extensively in recent years for numerous sensing applications in the academic literature. Despite the crucial role these surfactants play in the sensing applications, the comprehensive reviews that highlights the fundamentals associated with these assemblies and impact of these surfactants on the properties and sensing mechanisms are still quite scare. This review is an attempt in organizing the vast literature associated with this domain by providing critical insights into the fundamentals, preparation methodologies and sensing mechanisms of these surfactant stabilized Au NMs. For the simplification, the surfactants are divided into the typical and advanced surfactants and the Au NMs are classified into Au nanoparticles (NPs) and Au nanoclusters (NCs) depending upon the complexity in structure and size of the NMs respectively. The preparative methodologies are also elaborated for enhancing the understanding of the readers regarding such assemblies. The case studies regarding surfactant stabilized Au NMs were further divided into colorimetric sensors, surface plasmonic resonance (SPR) based sensors, luminescence-based sensors, and electrochemical/electrical sensors depending upon the property utilized by the sensor for the sensing of an analyte. Future perspectives are also discussed in detail for the researchers looking for further progress in that particular research domain.

Metal-organic frameworks for chemical sensing devices

Metal-organic frameworks (MOFs) are exceptionally large surface area materials with organized porous cages that have been investigated for nearly three decades. Due to the flexibility in their design and predisposition toward functionalization, they have shown promise in many areas of application, including chemical sensing. Consequently, they are identified as advanced materials with potential for deployment in analytical devices for chemical and biochemical sensing applications, where high sensitivity is desirable, for example, in environmental monitoring and to advance personal diagnostics. To keep abreast of new research, which signposts the future directions in the development of MOF-based chemical sensors, this review examines studies since 2015 that focus on the applications of MOF films and devices in chemical sensing. Various examples that use MOF films in solid-state sensing applications were drawn from recent studies based on electronic, electrochemical, electromechanical and optical sensing methods. These examples underscore the readiness of MOFs to be integrated in optical and electronic analytical devices. Also, preliminary demonstrations of future sensors are indicated in the performances of MOF-based wearables and smartphone sensors. This review will inspire collaborative efforts between scientists and engineers working within the field of MOFs, leading to greater innovations and accelerating the development of MOF-based analytical devices for chemical and biochemical sensing applications.

Efficient Gas and VOC Separation and Pesticide Detection in a Highly Stable Interpenetrated Indium-Organic Framework

The new indium-based organic framework {(Me₂NH₂)[In(BDPO)]·DMF·2H₂O}_n (1) was successfully constructed by using the oxalamide group modified ligand N,N'-bis(isophthalic acid)oxalamide (H₄BDPO). This framework presents a 2-fold interpenetrating structural characteristic, and the unique polar pore environment leads to a high capture ability for CO₂, C₂H_n and CH₃OH and good separation ability for CO₂ and C₂H_n over CH₄ as well as for CH₃OH over C₂H₅OH, which was further verified by an ideal adsorbed solution theory (IAST) calculation. Theoretical simulations pointed out the possible adsorption sites of different adsorbed gases in 1. In addition, the excellent chemical stability and strong luminescence of 1 give it an effective selective detection ability for 2,6-dichloro-4-nitroaniline (DCN) in water with a low detection limit of 3.85 ppm, and the detection mechanism is discussed in detail.