Nickel nanocrystal/nitrogen-doped carbon composites as efficient and carbon monoxide-resistant electrocatalysts for methanol oxidation reactions

Polythiophene-coated carbon nano boxes for efficient platinum-based catalysts for methanol electrooxidation

To improve the efficiency of the methanol oxidation reaction (MOR) in direct methanol fuel cells (DMFCs), it is essential to develop catalysts with high catalytic activity. However, constructing polyatomic doped carbon nanomaterials and understanding the interaction mechanisms between dopant elements remain significant challenges. In this study, we propose nitrogen-doped carbon nanobox (CNB) derived from Zeolitic Imidazolate Framework-67 (ZIF-67) crystals as precursors to serve as carriers for highly efficient platinum nanoparticles (Pt NPs). We synthesized platinum/poly(3,4-propylenedioxythiophene)/carbon nanobox (Pt/PProDOT/CNB) composites by wrapping CNB around PProDOT films via in situ oxidative polymerization. This unique structural design provides several advantages to the catalyst, including a large active surface area, numerous accessible electrocatalytic active centers, an optimized electronic structure, and good electronic conductivity. The Pt/PProDOT/CNB composites demonstrated excellent methanol oxidation performance, with a remarkable mass activity (MA) of 1639.9 mA mg-1Pt and a high electrochemical active surface area (ECSA) of 160.8 m2/g. Furthermore, the catalyst exhibited good CO resistance and outstanding durability.

Enhanced Hydroxyl Adsorption in Ultrathin NiO/Cr2 O3 In-Plane Heterostructures for Efficient Alkaline Methanol Oxidation Reaction

The exploration of advanced nickel-based electrocatalysts for alkaline methanol oxidation reaction (MOR) holds immense promise for value-added organic products coupled with hydrogen production, but still remain challenging. Herein, we construct ultrathin NiO/Cr2 O3 in-plane heterostructures to promote the alkaline MOR process. Experimental and theoretical studies reveal that NiO/Cr2 O3 in-plane heterostructures enable a favorable upshift of the d-band center and enhanced adsorption of hydroxyl species, leading to accelerated generation of active NiO(OH)ads species. Furthermore, ultrathin in-plane heterostructures endow the catalyst with good charge transfer ability and adsorption behavior of methanol molecules onto catalytic sites, contributing to the improvement of alkaline MOR kinetics. As a result, ultrathin NiO/Cr2 O3 in-plane heterostructures exhibit a remarkable MOR activity with a high current density of 221 mA cm-2 at 0.6 V vs Ag/AgCl, which is 7.1-fold larger than that of pure NiO nanosheets and comparable with other highly active catalysts reported so far. This work provides an effectual strategy to optimize the activity of nickel-based catalysts and highlights the dominate efficacy of ultrathin in-plane heterostructures in alkaline MOR.

N, P co-doped Ni/Mo-based multicomponent electrocatalysts in situ decorated on Ni foam for overall water splitting

Developing the robust non-precious metal bifunctional electrocatalyst is highly imperative for the hydrogen evolution from overall water splitting. Herein, a Ni foam (NF)-supported ternary Ni/Mo bimetallic complex (Ni/Mo-TEC@NF), hierarchically constructed by coupling the in-situ formed MoNi₄ alloys and Ni₂Mo₃O₈ with Ni₃Mo₃C on NF, has been developed through a facile method involving the in-situ hydrothermal growth of the Ni-Mo oxides/polydopamine (NiMoO_x/PDA) complex on NF and a subsequent annealing in a reduction atmosphere. Synchronously, N and P atoms are co-doped into Ni/Mo-TEC during the annealing procedure using phosphomolybdic acid and PDA raw materials as P and N sources, respectively. The resultant N, P-Ni/Mo-TEC@NF shows outstanding electrocatalytic activities and tremendous stability for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), due to the multiple heterojunction effect-promoted electron transfer, the large number of exposed active sites, and the modulated electronic structure by the N and P co-doping. It only needs a low overpotential of 22 mV to afford the current density of 10 mA·cm^-2 for HER in alkaline electrolyte. More importantly, as the anode and cathode, it requires only 1.59 and 1.65 V to achieve 50 and 100 mA·cm^-2 for overall water splitting, respectively, comparable to the benchmark Pt/C@NF//RuO₂@NF couple. This work could spur the search for economical and efficient electrodes by in situ constructing multiple bimetallic components on 3D conductive substrates for practical hydrogen generation.

Inhibitor and Activator: Dual Role of Subsurface Sulfide Enables Selective and Efficient Electro-Oxidation of Methanol to Formate on CuS@CuO Core-Shell Nanosheet Arrays

Selective electro-oxidation of aliphatic alcohols into value-added carboxylates at lower potentials than that of the oxygen evolution reaction (OER) is an environmentally and economically desirable anode reaction for clean energy storage and conversion technologies. However, it is challenging to achieve both high selectivity and high activity of the catalysts for the electro-oxidation of alcohols, such as the methanol oxidation reaction (MOR). Herein, a monolithic CuS@CuO/copper-foam electrode for the MOR with superior catalytic activity and almost 100% selectivity for formate is reported. In the core-shell CuS@CuO nanosheet arrays, the surface CuO directly catalyzes MOR, while the subsurface sulfide not only serves as an inhibitor to attenuate the oxidative power of the surface CuO to achieve selective oxidation of methanol to formate and prevent over-oxidation of formate to CO₂ but also serves as an activator to form more surface O defects as active sites and enhances the methanol adsorption and charge transfer to achieve superior catalytic activity. CuS@CuO/copper-foam electrodes can be prepared on a large scale by electro-oxidation of copper-foam at ambient conditions and can be readily utilized in clean energy technologies.

Hydrogel Nanocomposite-Derived Nickel Nanoparticles/Porous Carbon Frameworks as Non-Precious and Effective Electrocatalysts for Methanol Oxidation

Innovative and facile methods for the preparation of metal nanoparticles (MNPs) with A highly uniform distribution and anchored on a unique substrate are receiving increasing interest for the development of efficient and low-cost catalysts in the field of alternative and sustainable energy technologies. In this study, we report a novel and facile metal-ions adsorption-pyrolysis method based on a hydrogel nanocomposite for the preparation of well-distributed nickel nanoparticles on 3D porous carbon frameworks (Ni@PCFs). The pyrolysis temperature effect on electrocatalytic activity toward methanol oxidation and catalyst stability was investigated. Physicochemical characterizations (SEM, TEM, and XRD) were used to determine the morphology and composition of the prepared electrocatalyst, which were then linked to their electrocatalytic activity. The experimental results indicate that the catalyst synthesized by pyrolysis at 800 °C (Ni@PCFs-8) exhibits the highest electrocatalytic activity for oxidation of methanol in alkaline media. Additionally, prepared Ni@PCFs-8 displays a remarkable increase in electrocatalytic activity after activation in 1 M KOH and excellent stability. The adsorption-pyrolysis pathway ensures that the Ni NPs are trapped in the PCFs, which can provide highly reactive surface sites. This work may provide a facile and effective strategy for preparing uniformly distributed metallic NPs on a 3D PCF substrate with high catalytic activity for energy applications.

Accurately manipulating hierarchical flower-like Fe2P@CoP@nitrogen-doped carbon spheres as an efficient carrier material of Pt-based catalyst

Fabrication of hierarchical porous catalysts with a large specific surface area and tunable architecture provides an effective strategy to promote the catalytic performance of Pt-based catalysts. Herein, we design and construct hierarchical flower-like Fe₂P@CoP@nitrogen-doped carbon (Fe₂P@CoP@NDC) through a facile method, and synthesize Pt/Fe₂P@CoP@NDC porous spheres via acid pickling and depositing of Pt NPs. The morphology of Fe₂P@CoP@NDC is precisely manipulated by controlling the synthesis conditions, including the reaction time and the addition of a protective agent, and the protective growth mechanism of the hierarchical flower-like Fe₂P@CoP@NDC spheres is mentioned. Significantly, the Pt/Fe₂P@CoP@NDC catalyst exhibits 3.29 and 2.36 times higher mass activity and specific activity than those of commercial Pt/C for methanol oxidation, respectively. Furthermore, its residual mass activity after 1000 cycles is 5.77 times as much as that of the commercial Pt/C catalyst in acidic electrolytes. Based on exploration of the reaction kinetics of the Pt/Fe₂P@CoP@NDC catalyst, the excellent catalytic activity and durability are attributed to the unique porous structure with relatively open area and enlarged specific surface area, which can promote fast electron transport and charge transfer, resulting in quick reaction kinetics. Moreover, metal phosphides can effectively accelerate the oxidative removal of intermediates, accordingly improving the catalytic activity. Therefore, the Pt/Fe₂P@CoP@NDC material with these compositional and structural features is expected to be a promising electrochemical catalyst.

3D Co-Ni-C Network from Milk as Competitive Bifunctional Catalysts for Methanol and Urea Electrochemical Oxidation

Methanol oxidation (MOR) and urea oxidation (UOR) have been considered for new types of fuel cells, but the lack of highly active nonnoble metal catalysts restricts such cells. A NiCo-modified biomass carbon (milk as the carbon source)-based catalyst with a 3D structure is synthesized by using salt templates. The results show that 3D-C-NiCo (1:1) exhibits excellent MOR and UOR properties with a potential of 1.33 V vs. RHE and 1.35 V vs. RHE at 10 mA cm−2, respectively. MOR and UOR reactions not only can replace the oxygen evolution reaction (OER) in consumption of electrolytic water but also can effectively degrade wastewater pollution rich in methanol and urea.