Phase transformation and room temperature stabilization of various Bi2O3 nano-polymorphs: effect of oxygen-vacancy defects and reduced surface energy due to adsorbed carbon species

Multifunctional bismuth oxide (Bi2 O3 ) particles: Evidence for selective melanoma therapy

The current study investigates the therapeutic and optical properties of bismuth oxide (Bi2 O3 ) particles for selective melanoma therapy and prevention. The Bi2 O3 particles were prepared using a standard precipitation method. The Bi2 O3 particles induced apoptosis in human A375 melanoma cells but not human HaCaT keratinocytes or CCD-1090Sk fibroblast cells. This selective apoptosis appears to be associated with a combination of factors: increased particle internalization (2.29 ± 0.41, 1.16 ± 0.08 and 1.66 ± 0.22-fold of control) and enhanced production of reactive oxygen species (ROS) (3.4 ± 0.1, 1.1 ± 0.1 and 2.05 ± 0.17-fold of control) in A375 cells compared to HaCaT and CCD-1090SK cells, respectively. As a high-Z element, bismuth is also an excellent contrast agent for computer tomography, which renders Bi2 O3 a theranostic material. Moreover, Bi2 O3 displays high UV absorption and low photocatalytic activity compared to other semiconducting metal oxides, which opens further potential fields of application as a pigment or as an active ingredient in sunscreens. Overall, this study demonstrates the multifunctional properties of Bi2 O3 particles surrounding the treatment and prevention of melanoma.

Preparation of Bi2O3-YSZ and YSB-YSZ Composite Powders by a Microemulsion Method and Their Performance as Electrolytes in a Solid Oxide Fuel Cell

Bi₂O₃ is a promising sintering additive for YSZ that not only decreases its sintering temperature but also increases its ionic conductivity. However, Bi₂O₃ preferably grows into large-sized rods. Moreover, the addition of Bi₂O₃ induces phase instability of YSZ and the precipitation of monoclinic ZrO₂, which is unfavorable for the electrical property. In order to precisely control the morphology and size of Bi₂O₃, a microemulsion method was introduced. Spherical Bi₂O₃ nanoparticles were obtained from the formation of microemulsion bubbles at the water-oil interface due to the interaction between the two surfactants. Nanosized Bi₂O₃-YSZ composite powders with good mixing uniformity dramatically decreased the sintering temperature of YSZ to 1000 °C. Y₂O₃-stabilized Bi₂O₃ (YSB)-YSZ composite powders were also fabricated, which did not affect the phase of YSZ but decreased its sintering temperature. Meanwhile, the oxygen vacancy concentration further increased to 64.9% of the total oxygen with the addition of 5 mol% YSB. In addition, its ionic conductivity reached 0.027 S·cm^-1 at 800 °C, one order of magnitude higher than that of YSZ. This work provides a new strategy to simultaneously decrease the sintering temperature, stabilize the phase and increase the conductivity of YSZ electrolytes.

Emerging 2D Metal Oxides: From Synthesis to Device Integration

2D metal oxides have aroused increasing attention in the field of electronics and optoelectronics due to their intriguing physical properties. In this review, an overview of recent advances on synthesis of 2D metal oxides and their electronic applications is presented. First, the tunable physical properties of 2D metal oxides that relate to the structure (various oxidation-state forms, polymorphism, etc.), crystallinity and defects (anisotropy, point defects, and grain boundary), and thickness (quantum confinement effect, interfacial effect, etc.) are discussed. Then, advanced synthesis methods for 2D metal oxides besides mechanical exfoliation are introduced and classified into solution process, vapor-phase deposition, and native oxidation on a metal source. Later, the various roles of 2D metal oxides in widespread applications, i.e., transistors, inverters, photodetectors, piezotronics, memristors, and potential applications (solar cell, spintronics, and superconducting devices) are discussed. Finally, an outlook of existing challenges and future opportunities in 2D metal oxides is proposed.

Sulfur tuning oxygen vacancy of Ba2Bi1.4Ta0.6O6 for boosted photocatalytic tetracycline hydrochloride degradation and hydrogen evolution

Photocatalysis, such as solar-driven photodegradation and energy conversion, has attracted great attention, given that it provides a promising solution for alleviating the energy shortage and environmental contamination issues. However, the insufficient light absorption and charge separation/transport efficiency restrict the solar conversion efficiency. It has been proved that oxygen vacancies (O_v) can improve the photocatalytic activity by enhancing the light absorption. But in this study, we show that oxygen vacancies hinder the charge separation/transfer in Ba₂Bi_1.4Ta_0.6O₆. The incorporation of S further pushes the light absorption edge up to 1170 nm. Therefore, the S/O_v-Ba₂Bi_1.4Ta_0.6O₆ sample can absorb not only the full range of visible light but also part of near-infrared light. More importantly, it mitigates the drawback of oxygen vacancies, improving the charge separation/transport by 1.65 times. As a result, The S/O_v-Ba₂Bi_1.4Ta_0.6O₆ nanowires manifest 4.41 times and over 100 times higher photocatalytic activity for tetracycline hydrochloride degradation and hydrogen production, respectively.

Visible-light driven p-n heterojunction formed between α-Bi2O3 and Bi2O2CO3 for efficient photocatalytic degradation of tetracycline

To improve the efficiency of photocatalytic oxidative degradation of antibiotic pollutants, it is essential to develop an efficient and stable photocatalyst. In this study, a polymer-assisted facile synthesis strategy is proposed for the polymorph-controlled α-Bi2O3/Bi2O2CO3 heterojunction retained at elevated calcination temperatures. The p-n heterojunction can effectively separate and migrate electron-hole pairs, which improves visible-light-driven photocatalytic degradation from tetracycline (TC). The BO-400@PAN-140 photocatalyst achieves the highest pollutant removal efficiency of 98.21% for photocatalytic tetracycline degradation in 1 h (λ > 420 nm), and the degradation efficiency was maintained above 95% after 5 cycles. The morphology, crystal structure, and chemical state of the composites were analysed by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Ultraviolet-visible diffuse reflection, transient photocurrent response, and electrochemical impedance spectroscopy were adopted to identify the charge transfer and separation efficiency of photogenerated electron-hole pairs. The EPR results verified h+ and ˙OH radicals as the primary active species in the photocatalytic oxidation reactions. This observation was also consistent with the results of radical trapping experiments. In addition, the key intermediate products of the photocatalytic degradation of TC over BO-400@PAN-140 were identified via high-performance liquid chromatography-mass spectrometry, which is compatible with two possible photocatalytic reaction pathways. This work provides instructive guidelines for designing heterojunction photocatalysts via a polymer-assisted semiconductor crystallographic transition pathway for TC degradation into cleaner production.

Cooperative Coupling of H2 O2 Production and Organic Synthesis over a Floatable Polystyrene-Sphere-Supported TiO2 /Bi2 O3 S-Scheme Photocatalyst

Cooperative coupling of photocatalytic H₂ O₂ production with organic synthesis has an expansive perspective in converting solar energy into storable chemical energy. However, traditional powder photocatalysts suffer from severe agglomeration, limited light absorption, poor gas reactant accessibility, and reusable difficulty, which greatly hinders their large-scale application. Herein, floatable composite photocatalysts are synthesized by immobilizing hydrophobic TiO₂ and Bi₂ O₃ on lightweight polystyrene (PS) spheres via hydrothermal and photodeposition methods. The floatable photocatalysts are not only solar transparent, but also upgrade the contact between reactants and photocatalysts. Thus, the floatable step-scheme (S-scheme) TiO₂ /Bi₂ O₃ photocatalyst exhibits a drastically enhanced H₂ O₂ yield of 1.15 mm h^-1 and decent furfuryl alcohol conversion to furoic acid synchronously. Furthermore, the S-scheme mechanism and dynamics are systematically investigated by in situ irradiated X-ray photoelectron spectroscopy and femtosecond transient absorption spectrum analyses. In situ Fourier transform infrared spectroscopy and density functional theory calculations reveal the mechanism of furoic acid evolution. The ingenious design of floatable photocatalysts not only furnishes insight into maximizing photocatalytic reaction kinetics but also provides a new route for highly efficient heterogeneous catalysis.

Multiferroic behavior of the functionalized surface of a flexible substrate by deposition of Bi2 O3 and Fe2 O3

Thin films of bismuth and iron oxides were obtained by atomic layer deposition (ALD) on the surface of a flexible substrate poly(4,4'-oxydiphenylene-pyromellitimide) (Kapton) at a temperature of 250°C. The layer thickness was 50 nm. The samples were examined by secondary-ion mass spectrometry, and uniform distribution of elements in the film layer was observed. Surface morphology, electrical polarization, and mechanical properties were investigated by atomic force microscope, piezoelectric force microscopy, and force modulation microscopy. The values of current in the near-surface layer varied in the range of ±80 pA when a potential of 5 V was applied. Chemical analysis was performed by X-ray photoelectron spectroscopy, where the formation of Bi₂ O₃ and Fe₂ O₃ phases, as well as intermediate phases in the Bi-Fe-O system, was observed. Magnetic measurements were carried out by a vibrating sample magnetometer that showed a ferromagnetic response. The low-temperature method of functionalization of the Kapton surface with bismuth and iron oxides will make it possible to adapt the Bi-Fe-O system to flexible electronics.

Epitaxial Growth of 2D Ultrathin Metastable γ-Bi2 O3 Flakes for High Performance Ultraviolet Photodetection

Ultraviolet detection is of great significance due to its wide applications in the missile tracking, flame detecting, pollution monitoring, and so on. The nonlayered semiconductor γ-Bi₂ O₃ is a promising candidate toward high-performance UV detection due to the wide bandgap, excellent light sensitivity, environmental stability, nontoxic and elemental abundance properties. However, controllable preparation of ultrathin 2D γ-Bi₂ O₃ flakes remains a challenge, owing to its nonlayered structure, metastable nature, and other competing phases. Moreover, the UV photodetectors based on 2D γ-Bi₂ O₃ flake have not been implemented yet. Here, ultrathin (down to 4.8 nm) 2D γ-Bi₂ O₃ flakes with high crystal quality are obtained via a van der Waals epitaxy method. The as-synthesized single-crystalline γ-Bi₂ O₃ flakes show a body-centered cubic structure and grown along (111) lattice plane as revealed by experimental observations. More importantly, photodetectors based on the as-synthesized 2D γ-Bi₂ O₃ flakes exhibit promising UV detection ability, including a responsivity of 64.5 A W^-1 , a detectivity of 1.3 × 10¹³ Jones, and an ultrafast response speed (τ_rise  ≈ 290 µs and τ_decay  ≈ 870 µs) at 365 nm, suggesting its great potential for various optoelectronic applications.

Plasmonic Bismuth Nanoparticles: Thiolate Pyrolysis Synthesis, Size-Dependent LSPR Property, and Their Oxidation Behavior

Plasmonics, especially the localized surface plasmon resonance (LSPR) in non-noble metal bismuth nanoparticles (Bi NPs), and its spectral features and applications have stimulated increasing research interest in recent years. However, the lack of mature methods to prepare Bi NPs with a well-controlled size and/or shape significantly limits the experimental investigations concerning the LSPR optical properties. Herein, we realize the size-tunable synthesis of nearly monodisperse spherical Bi NPs through a thiolate pyrolysis reaction in solution. The instantaneous thermolysis of a layered molecular intermediate, bismuth dodecanethiolate [Bi(SC₁₂H₂₅)₃], results in a classical LaMer mechanism for the nucleation and growth of Bi NPs, allowing for a precise size control from 65 to 205 nm in the average diameter. The diameter tunability enables a systematic study on the size dependence of LSPR optical properties of Bi NPs, and we observe rich ultraviolet-visible-near-infrared spectral responses arising from the LSPR absorption and scattering of Bi NPs as their size varies, which will greatly benefit the light harvesting and manipulation in the solar spectrum. Furthermore, we find that a complete oxidation occurs to Bi NPs under air flow at the temperature when they melt and accordingly generate metastable tetragonal-phase β-Bi₂O₃ NPs that show an optical band gap of 2.15 eV and interesting temperature-dependent β → α → δ → (γ + β) polymorphic transitions.