Engineering Agonistic Bispecifics to Investigate the Influence of Distance on Surface-Mediated Complement Activation

The development of agonists capable of activating the human complement system by binding to the C1 complex presents a novel approach for targeted cell killing. Bispecific nanobodies and Abs can successfully use C1 for this purpose; however, efficacy varies significantly between epitopes, Ab type, and bispecific design. To address this variability, we investigated monomeric agonists of C1 in the form of bispecific nanobodies, which lack Fc domains that lead to oligomerization in Abs. These therefore offer an ideal opportunity to explore the geometric parameters crucial for C1 activation. In this study, we explored the impact of linker length as a metric for Ag and epitope location. DNA nanotechnology and protein engineering allowed us to design linkers with controlled lengths and flexibilities, revealing a critical range of end-to-end distances for optimal complement activation. We discovered that differences in complement activation were not caused by differential C1 activation or subsequent cleavage of C4, but instead impacted C4b deposition and downstream membrane lysis. Considering the importance of Ab class and subclass, this study provides insights into the structural requirements of C1 binding and activation, highlighting linker and hinge engineering as a potential strategy to enhance potency over specific cellular targets. Additionally, using DNA nanotechnology to modify geometric parameters demonstrated the potential for synthetic biology in complement activation. Overall, this research offers valuable insights into the design and optimization of agonists for targeted cell killing through complement activation.

Tailoring of Physical Properties in Macroporous Poly(isocyanopeptide) Cryogels

Over the years, synthetic hydrogels have proven remarkably useful as cell culture matrixes to elucidate the role of the extracellular matrix (ECM) on cell behavior. Yet, their lack of interconnected macropores undermines the widespread use of hydrogels in biomedical applications. To overcome this limitation, cryogels, a class of macroporous hydrogels, are rapidly emerging. Here, we introduce a new, highly elastic, and tunable synthetic cryogel, based on poly(isocyanopeptides) (PIC). Introduction of methacrylate groups on PIC facilitated cryopolymerization through free-radical polymerization and afforded cryogels with an interconnected macroporous structure. We investigated which cryogelation parameters can be used to tune the architectural and mechanical properties of the PIC cryogels by systematically altering cryopolymerization temperature, polymer concentration, and polymer molecular weight. We show that for decreasing cryopolymerization temperatures, there is a correlation between cryogel pore size and stiffness. More importantly, we demonstrate that by simply varying the polymer concentration, we can selectively tune the compressive strength of PIC cryogels without affecting their architecture. This unique feature is highly useful for biomedical applications, as it facilitates decoupling of stiffness from other variables such as pore size. As such, PIC cryogels provide an interesting new biomaterial for scientists to unravel the role of the ECM in cellular functions.

Collagen-decorated electrospun scaffolds of unsaturated copolyesters for bone tissue regeneration

Many efforts have been devoted to bone tissue to regenerate damaged tissues, and the development of new biocompatible materials that match the biological, mechanical, and chemical features required for this application is crucial. Herein, a collagen-decorated scaffold was prepared via electrospinning using a synthesized unsaturated copolyester (poly(globalide-co-pentadecalactone)), followed by two coupling reactions: thiol-ene functionalization with cysteine and further conjugation via EDC/NHS chemistry with collagen, aiming to design a bone tissue regeneration device with improved hydrophilicity and cell viability. Comonomer ratios were varied, affecting the copolymer's thermal and chemical properties and highlighting the tunable features of this copolyester. Functionalization with cysteine created new carboxyl and amine groups needed for bioconjugation with collagen, which is responsible for providing biological and structural integrity to the extra-cellular matrix. Bioconjugation with collagen turned the scaffold highly hydrophilic, decreasing its contact angle from 107 ± 2° to 0°, decreasing the copolymer crystallinity by 71%, and improving cell viability by 85% compared with the raw scaffold, thus promoting cell growth and proliferation. The highly efficient and biosafe strategy to conjugate polymers and proteins created a promising device for bone repair in tissue engineering.

Lysozyme stability in various deep eutectic solvents using molecular dynamics simulations

The ability of neat deep eutectic solvents (DESs) to influence protein structure and function has gained considerable interest due to the unstable nature of enzymes or therapeutic proteins, which are often exposed to thermal, chemical, or mechanical stresses when handled at an industrial scale. In this study, we simulated a model globular protein, lysozyme, in water and six choline chloride-based DES using molecular dynamics simulations, to investigate the structural changes in various solvent environments, giving insights into the overall stability of lysozyme. Root mean square deviation (RMSD) and root mean square fluctuations (RMSF) of the C-α backbone indicated that most DESs induced a less flexible and rigid lysozyme structure compared to water. The radius of gyration and end-to-end distance calculations pointed towards higher structural compactness in reline and levuline, while the structure of lysozyme considerably expanded in oxaline. Protein-solvent interactions were further analysed by hydrogen bonding interactions and radial distribution functions (RDF), which indicated a higher degree of lysozyme-hydrogen bond donor (HBD) interactions compared to lysozyme-choline hydrogen bonding. Surface area analysis revealed an overall % increase in total positive, negative, donor, and acceptor surface areas in malicine and oxaline compared to water and other DESs, indicating the exposure of a larger number of residues to interactions with the solvent. Reline, levuline, and polyol-based DESs comparatively stabilized lysozyme, even though changes in the secondary/tertiary structures were observed.Communicated by Ramaswamy H. Sarma.

Growth Factor Immobilization to Synthetic Hydrogels: Bioactive bFGF-Functionalized Polyisocyanide Hydrogels

With its involvement in cell proliferation, migration and differentiation basic fibroblast growth factor (bFGF) has great potential for tissue engineering purposes. So far, however, clinical translation of soluble bFGF-based therapies is unsuccessful, because the required effective doses are often supraphysiological, which may cause adverse effects. An effective solution is growth factor immobilization, whereby bFGF retains its bioactivity at increased efficacy. Studied carriers include films, solid scaffolds, and particles, as well as natural and synthetic hydrogels. However, these synthetic hydrogels poorly resemble the characteristics of the native extracellular matrix (ECM). In this work, bFGF is covalently conjugated to the synthetic, but highly biocompatible, polyisocyanide-based hydrogel (PIC-bFGF), which closely mimics the architecture and mechanical properties of the ECM. The growth factor conjugation protocol is straightforward and readily extrapolated to other growth factors or proteins. The PIC-bFGF hydrogel shows a prolonged bioactivity up to 4 weeks although no clear effects on the ECM metabolism are observed. Beyond the future potential of the PIC-bFGF hydrogel toward various tissue engineering applications, this work underlines that simple biological conjugation procedures are a powerful strategy to induce additional bioactivity in 3D synthetic cell culture matrices.

Therapeutic Efficacy of Polymeric Biomaterials in Treating Diabetic Wounds-An Upcoming Wound Healing Technology

Diabetic wounds are one of the serious, non-healing, chronic health issues faced by individuals suffering from diabetic mellitus. The distinct phases of wound healing are either prolonged or obstructed, resulting in the improper healing of diabetic wounds. These injuries require persistent wound care and appropriate treatment to prevent deleterious effects such as lower limb amputation. Although there are several treatment strategies, diabetic wounds continue to be a major threat for healthcare professionals and patients. The different types of diabetic wound dressings that are currently used differ in their properties of absorbing wound exudates and may also cause maceration to surrounding tissues. Current research is focused on developing novel wound dressings incorporated with biological agents that aid in a faster rate of wound closure. An ideal wound dressing material must absorb wound exudates, aid in the appropriate exchange of gas, and protect from microbial infections. It must support the synthesis of biochemical mediators such as cytokines, and growth factors that are crucial for faster healing of wounds. This review highlights the recent advances in polymeric biomaterial-based wound dressings, novel therapeutic regimes, and their efficacy in treating diabetic wounds. The role of polymeric wound dressings loaded with bioactive compounds, and their in vitro and in vivo performance in diabetic wound treatment are also reviewed.

Crosslinker structure modulates bulk mechanical properties and dictates hMSC behavior on hyaluronic acid hydrogels

Synthetic hydrogels are attractive platforms due in part to their highly tunable mechanics, which impact cell behavior and secretory profile. These mechanics are often controlled by altering the number of crosslinks or the total polymer concentration in the gel, leading to structure-property relationships that inherently couple network connectivity to the overall modulus. In contrast, the native extracellular matrix (ECM) contains structured biopolymers that enable stiff gels even at low polymer content, facilitating 3D cell culture and permeability of soluble factors. To mimic the hierarchical order of natural ECM, this work describes a synthetic hydrogel system in which mechanics are tuned using the structure of sequence-defined peptoid crosslinkers, while fixing network connectivity. Peptoid crosslinkers with different secondary structures are investigated: 1) a helical, molecularly stiff peptoid, 2) a non-helical, less stiff peptoid, and 3) an unstructured, relatively flexible peptoid. Bulk hydrogel storage modulus increases when crosslinkers of higher chain stiffness are used. In-vitro studies assess the viability, proliferation, cell morphology, and immunomodulatory activity of human mesenchymal stem cells (hMSCs) on each hydrogel substrate. Matrix mechanics regulate the morphology of hMSCs on the developed substrates, and all of the hydrogels studied upregulate IDO production over culture on TCP. Softer substrates further this upregulation to a plateau. Overall, this system offers a biomimetic strategy for decoupling hydrogel storage modulus from network connectivity, enabling systematic study of biomaterial properties on hMSC behavior and enhancement of cellular functionality for therapeutic applications. STATEMENT OF SIGNIFICANCE: Various strategies to tune hydrogel mechanics have been developed to control human mesenchymal stem cell (hMSC) behavior and regulate their immunomodulatory potential. However, these strategies typically couple mechanics to network connectivity, which in turn changes other hydrogel properties such as permeability that may have unintended effects on hMSC behavior. This work presents a strategy to tune hydrogel mechanics using crosslinkers with different secondary structure and molecular rigidity. This strategy successfully decouples hydrogel moduli from crosslinker stoichiometry and mimics the hierarchical nature of the native extracellular matrix. The moduli of the developed hydrogels led to significant impacts on hMSC morphology and proliferation, and increased immunomodulatory potential, indicating that molecular rigidity is a promising avenue to control engineered ECM mechanics for therapeutic applications.

Toward Tissue-Like Material Properties: Inducing In Situ Adaptive Behavior in Fibrous Hydrogels

The materials properties of biological tissues are unique. Nature is able to spatially and temporally manipulate (mechanical) properties while maintaining responsiveness toward a variety of cues; all without majorly changing the material's composition. Artificial mimics, synthetic or biomaterial-based are far less advanced and poorly reproduce the natural cell microenvironment. A viable strategy to generate materials with advanced properties combines different materials into nanocomposites. This work describes nanocomposites of a synthetic fibrous hydrogel, based on polyisocyanide (PIC), that is noncovalently linked to a responsive cross-linker. The introduction of the cross-linker transforms the PIC gel from a static fibrous extracellular matrix mimic to a highly dynamic material that maintains biocompatibility, as demonstrated by in situ modification of the (non)linear mechanical properties and efficient self-healing properties. Key in the material design is cross-linking at the fibrillar level using nanoparticles, which, simultaneously may be used to introduce more advanced properties.

Role of the Anilinium Ion on the Selective Polymerization of Anilinium 2-Acrylamide-2-methyl-1-propanesulfonate

The development of anilinium 2-acrylamide-2-methyl-1-propanesulfonate (Ani-AMPS) monomer, confirmed by ¹H NMR, ¹³C NMR, and FTIR, is systematically studied. Ani-AMPS contains two polymerizable functional groups, so it was submitted to selective polymerization either by free-radical or oxidative polymerization. Therefore, poly(anilinium 2-acrylamide-2-methyl-1-propanesulfonic) [Poly(Ani-AMPS)] and polyaniline doped with 2-acrylamide-2-methyl-1-propanesulfonic acid [PAni-AMPS] can be obtained. First, the acrylamide polymer, poly(Ani-AMPS), favored the π-stacking of the anilinium group produced by the inter- and intra-molecular interactions and was studied utilizing ¹H NMR, ¹³C NMR, FTIR, and UV-Vis-NIR. Furthermore, poly(Ani-AMPS) fluorescence shows quenching in the presence of Fe²⁺ and Fe³⁺ in the emission spectrum at 347 nm. In contrast, the typical behavior of polyaniline is observed in the cyclic voltammetry analysis for PAni-AMPS. The optical properties also show a significant change at pH 4.4. The PAni-AMPS structure was corroborated through FTIR, while the thermal properties and morphology were analyzed utilizing TGA, DSC (except PAni-AMPS), and FESEM.