Dual-Functional Tungsten-Doped NiO for Highly Sensitive Triethylamine Sensor with ppb Level Detection Limit

In this study, the W-doped Nickel oxide (NiO) nanoflowers were synthesized using a straightforward hydrothermal method, significantly enhancing the sensing performance toward triethylamine through dual-functional tungsten doping. The optimal doping concentration not only increased the specific surface area of NiO from 25.54 to 189.19 m2 g-1 but also reduced the formation energy of oxygen vacancies. The sensor containing 4 at % W-doped NiO demonstrated exceptional sensitivity to triethylamine, achieving a detection level as high as 229.0 for concentrations of 100 ppm at 237.5 °C. This triethylamine sensor represents a 135-fold enhancement over sensors fabricated from undoped NiO, and offers a rapid response/recovery time of 8 and 30 s, respectively. Furthermore, at a lower triethylamine concentration of 50 ppb, indicating a lower detection limit.

High-Performance N-Butanol Gas Sensor Based on Iron-Doped Metal-Organic Framework-Derived Nickel Oxide and DFT Study

In this study, a straightforward two-step hydrothermal process was used to synthesize Fe-doped NiO nanomaterials. A number of characterization approaches were employed to explore the structure and morphology of the synthesized Fe-doped NiO. The as-prepared samples were multi-layered flower-like structures formed by nanoparticles, according to scanning electron microscopy and transmission electron microscopy studies. The findings of the study on gas sensing performance showed that the response of the 1.5 at % Fe-NiO sensor was nearly 100 times greater than that of the pure NiO sensor, and the lower limit of detection was greatly decreased (50 ppb). The 1.5 at % Fe-NiO sensor exhibited superior sensing performance for n-butanol. The incorporation of an appropriate amount of Fe into the NiO lattice modified the carrier concentration, which is the primary cause of the increased sensor performance of an appropriate amount of Fe-doped NiO. In addition, the density functional theory calculation method based on the first-principles theory was used to study the adsorption performance and electronic behavior of pure NiO and 1.5 at % Fe-NiO for n-butanol. The calculated results were consistent with the experimental results.

Semiconductor Gas Sensor for Triethylamine Detection

With the demanding detection of unique toxic gas, semiconductor gas sensors have attracted tremendous attention due to their intriguing features, such as, high sensitivity, online detection, portability, ease of use, and low cost. Triethylamine, a typical gas of volatile organic compounds, is an important raw material for industrial development, but it is also a hazard to human health. This review presents a concise compilation of the advances in triethylamine detection based on chemiresistive sensors. Specifically, the testing system and sensing parameters are described in detail. Besides, the sensing mechanism with characterizing tactics is analyzed. The research status based on various chemiresistive sensors is also surveyed. Finally, the conclusion and challenges, as well as some perspectives toward this area, are presented.

Synthesis of Fe-doped NiO nanosheets on carbon cloth for improved catalytic performance in Li–O2 batteries

The substitution of Ni2+ in NiO with Fe3+ can significantly improve the cycling stability and discharge/recharge capacities of Li–O2 batteries.

The modification effect of Fe2O3 nanoparticles on ZnO nanorods improves the adsorption and detection capabilities of TEA

The depletion layer and more active sites are the key factors for improving the gas sensitivity of an Fe2O3/ZnO sensor.

Ultrasensitive ppb-level trimethylamine gas sensor based on p-n heterojunction of Co3O4/WO3

Trace poisonous and harmful gases in the air have been harming and affecting people's health for a long time. At present, effective and accurate detection of ppb-level harmful gas is still a bottleneck to be overcome. Herein, we report a ppb-level triethylamine (TEA) gas sensor based on p-n heterojunction of Co₃O₄/WO₃, which is prepared with ZIF-67 as the precursor and provides Co₃O₄deposited tungsten oxide flower-like structure. Due to the introduction of Co₃O₄and the 3D flower-like structure of WO₃, the Co₃O₄/WO₃-2 gas sensor shows excellent gas sensing performance (1101 for 10 ppm at 240 °C), superb selectivity, good long-term stability and linear response for TEA concentration. Moreover, the experimental results indicate that the Co₃O₄/WO₃-2 gas sensor also possesses a good response to 50 ppb TEA, in fact, the theoretical limit of detection is 0.6 ppb. Co₃O₄not only improves the efficiency of electron separation/transport, but also accelerates the oxidation rate of TEA. This method of synthesizing p-n heterojunction with ZIF as the precursor provides a new idea and method for the preparation of low detection limit gas sensors.

MOF-Derived Mesoporous and Hierarchical Hollow-Structured In2O3-NiO Composites for Enhanced Triethylamine Sensing

It remains a challenge to design and fabricate high-performance gas sensors using metal-organic framework (MOF)-derived metal oxide semiconductors (MOS) as sensing materials due to the structural damage during the annealing process. In this study, the mesoporous In₂O₃-NiO hollow spheres consisting of nanosheets were prepared via a solvothermal reaction and subsequent cation exchange. More importantly, the transformation of Ni-MOF into In/Ni-MOF through exchanging the Ni²⁺ ion with In³⁺ ion can prevent the destruction of the porous reticular skeleton and hierarchical structure of Ni-MOF during calcination. Thus, the mesoporous In₂O₃-NiO hollow composites possess high porosity and large specific surface area (55.5 m² g^-1), which can produce sufficient permeability pathways for volatile organic compound (VOCs) molecules, maximize the active sites, and enhance the capacity of VOC capture. The mesoporous In₂O₃-NiO-based sensors exhibit enhanced triethylamine (TEA) sensing performance (S = 33.9-100 ppm) with distinct selectivity, good long-term stability, and lower detection limit (500 ppb) at 200 °C. These results can be attributed to the mesoporous hollow hierarchical structure and p-n junction of In₂O₃-NiO. The preparation concept mentioned in this work may provide a versatile platform applicable to various mesoporous composite sensing material-based hollow structures.

Construction of PdO-decorated double-shell ZnSnO3 hollow microspheres for n-propanol detection at low temperature

The sensor based on 4 wt% PdO-loaded double-shell ZnSnO3 hollow microspheres shows rapid response/recovery speed to n-propanol at low working temperature.

A microcube-like hierarchical heterostructure of α-Fe2O3@α-MoO3 for trimethylamine sensing

A rational design and directional synthesis of well-defined porous metal oxide heterostructures remains a challenge for the fabrication of new gas sensors with enhanced sensing properties. Herein, a novel hierarchical heterostructure of α-Fe2O3@α-MoO3 microcubes was prepared by applying a self-sacrifice template strategy, in which a porous metal-organic framework (MOF) was used as the precursor with the partial insertion of OH- and MoO42- and extraction of [Fe(CN)6]34- followed by heating treatment. Benefiting from the porous microcubic structural characteristic, the α-Fe2O3@α-MoO3 heterostructures exhibited excellent selectivity and high sensitivity for triethylamine gas with the highest response value (Ra/Rg) of 18.64 under the operating temperature of 240 °C. The experimental results also revealed that the material showed a fast response and recovery time (12 s/106 s) and excellent repeatability for at least 20 days. This feasible synthetic strategy may provide a versatile and controlled way to prepare other polymetal oxide-based heterostructures with improved sensing performance.