Modulating built-in electric field via Bi-VO4-Fe interfacial bridges to enhance charge separation for efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting on semiconductor electrodes is considered to be one of the important ways to produce clean and sustainable hydrogen fuel, which is a great help in solving energy and environmental problems. Bismuth vanadate (BiVO4) as a promising photoanode for photoelectrochemical water splitting still suffers from poor charge separation efficiency and photo-induced self-corrosion. Herein, we develop heterojunction-rich photoanodes composed of BiVO4 and iron vanadate (FeVO4), coated with nickel iron oxide (NiFeOx/FeVO4/BiVO4). The formation of the interface between BiVO4 and FeVO4 (Bi-VO4-Fe bridges) enhances the interfacial interaction, resulting in improved performance. Meanwhile, high-conductivity FeVO4 and NiFeOx oxygen evolution co-catalysts effectively enhance bulk electron/hole separation, interface water's kinetics and photostability. Concurrently, the optimized NiFeOx/FeVO4/BiVO4 possesses a remarkable photocurrent density of 5.59 mA/cm2 at 1.23 V versus reversible hydrogen electrode (vs RHE) under AM 1.5G (Air Mass 1.5 Global) simulated sunlight, accompanied by superior stability without any decreased of its photocurrent density after 14 h. This work not only reveals the crucial role of built-in electric field in BiVO4-based photoanode during PEC water splitting, but also provides a new guide to the design of efficient photoanode for PEC.

Self-Standing Mo/MoO2 Porous Flake Arrays for Efficient Hydrogen Evolution Reaction in High-pH Media

The alkaline hydrogen evolution reaction (HER) is limited by scarce proton availability, resulting in slower reaction kinetics compared to those under acidic conditions. Enhancing the local chemical environment of protons on the catalyst surface can improve the intrinsic reaction kinetics. Here, we design a Mo/MoO2 metallic heterojunction that creates an acidic-like environment with a proton-rich surface, significantly enhancing HER performance in alkaline electrolytes, as confirmed by in situ spectroscopy and electrochemical analysis. A self-standing Mo/MoO2 catalytic electrode is fabricated via a controlled pyrolysis-reduction strategy. This electrode exhibits exceptional HER activity, with low overpotentials of 65 mV at 10 mA cm-2 and 315 mV at 500 mA cm-2, a Tafel slope of 38.2 mV dec-1, and stability exceeding 60 h at -300 mA cm-2 in alkaline solution. The porous flake array structure of the Mo/MoO2 heterojunctions enhances the adjacent hydronium (H3O+) concentration, resulting in a ΔGH* value of 0.15 eV and a water dissociation energy barrier of 0.37 eV in an alkaline medium. The successful preparation of a large-area electrode (2 cm × 2 cm) demonstrates the scalability of this approach for fabricating molybdenum-based catalytic electrodes with enhanced HER activity in alkaline environments.

Electron Redistribution of Ru Site on MoO2@NiMoO4 Support for Efficient Ampere-Level Current Density Electrolysis of Alkaline Seawater

Seawater electrolysis is a promising but challenging strategy to generate carbon-neutral hydrogen. A grand challenge for hydrogen evolution reaction (HER) from alkaline seawater electrolysis is the development of efficient and stable electrocatalysts to overcome the limitation of sluggish kinetics. Here, a 3D nanorod hybrid catalyst is reported, which comprises heterostructure MoO2@NiMoO4 supported Ru nanoparticles (Ru/ MoO2@NiMoO4) with a size of ≈5 nm. Benefitting from the effect of strongly coupled interaction, Ru/MoO2@NiMoO4 catalyst exhibits a remarkable alkaline seawater hydrogen evolution performance, featured by a low overpotential of 184 mV at a current density of 1.0 A cm-2, superior to commercial Pt/C (338 mV). Experimental observations demonstrate that the heterostructure MoO2@NiMoO4 as an electron-accepting support makes the electron transfer from the Ru nanoparticles to MoO2, and thereby implements the electron redistribution of Ru site. Mechanistic analysis elucidates that the electron redistribution of active Ru site enhances the ability of hydrogen desorption, thereby promoting alkaline seawater HER kinetics and finally leading to a satisfactory catalysis performance at ampere-level current density of alkaline seawater electrolysis.

Design of a new nanocomposite based on Keggin-type [ZnW12O40]6- anionic cluster anchored on NiZn2O4 ceramics as a promising material towards the electrocatalytic hydrogen storage

Extensive research efforts have been dedicated to developing electrode materials with high capacity to address the increasing complexities arising from the energy crisis. Herein, a new nanocomposite was synthesized via the sol-gel method by immobilizing K6ZnW12O40 within the surface of NiZn2O4. ZnW12O40@NiZn2O4 was characterized by FT-IR, UV-Vis, XRD, SEM, EDX, BET, and TGA-DTG methods. The electrochemical characteristics of the materials were examined using cyclic voltammogram (CV) and charge-discharge chronopotentiometry (CHP) techniques. Multiple factors affecting the hydrogen storage capacity, including current density (j), surface area of the copper foam, and the consequences of repeated cycles of hydrogen adsorption-desorption were evaluated. The initial cycle led to an impressive hydrogen discharge capability of 340 mAh/g, which subsequently increased to 900 mAh/g after 20 cycles with a current density of 2 mA in 6.0 M KOH medium. The surface area and the electrocatalytic characteristics of the nanoparticles contribute to facilitate the formation of electrons and provide good diffusion channels for the movement of electrolyte ions throughout the charge-discharge procedure.

A universal method to fabricate high-valence transition metal-based HER electrocatalysts and direct Raman spectroscopic evidence for interfacial water regulation

Valence modulation of transition metal oxides represents a highly effective approach in designing high-performance catalysts, particularly for pivotal applications such as the hydrogen evolution reaction (HER) in solar/electric water splitting and the hydrogen economy. Recently, there has been a growing interest in high-valence transition metal-based electrocatalysts (HVTMs) due to their demonstrated superiority in HER performance, attributed to the fundamental dynamics of charge transfer and the evolution of intermediates. Nevertheless, the synthesis of HVTMs encounters considerable thermodynamic barriers, which presents challenges in their preparation. Moreover, the underlying mechanism responsible for the enhancement in HVTMs still needs to be discovered. Hence, the universal synthesis strategies of the HVTMs are discussed, and direct Raman spectroscopic evidence for intermediates regulation is revealed to guide the further design of the HVTM electrocatalysts. This work offers new insights for facile designing of HVTMs electrocatalysts for energy conversion and storage through adjusting the reaction pathway.

Tunable-pH Environment Induced by Local Anchor Effect of High Lewis Basicity Conductive Polymers toward Glycerol Upgrading Assisted Hydrogen Evolution

Hybrid organic/inorganic composites with the organic phase tailored to modulate the local chemical environment at the transition metal-based catalyst surface arise as an enchanting category of catalysts for electrocatalysis. A fundamental understanding of how the conductive polymers of different Lewis basicities affect the reaction path is, however, still lacking to guide rational catalyst design. Herein, polyaniline (PANI), poly(3,4-ethylenedioxythiophene) (PEDOT), and poly(vinyl alcohol) (PVA) manifesting different Lewis basicities are compared for their regulatory roles on the hydrogen evolution reaction (HER) and glycerol electrooxidation (GOR) pathways regarding local proton coverage. Concerted efforts from in situ Raman and DFT theoretical calculations unveil that conductive polymer/V2O5 surface with tunable local pH regulated by Lewis acidity/basicity. As a result of the tailored chemical environment, the restructured V2O5/PANI/NF composite demonstrates a low overall potential of 1.55 V at the partial current density of 50 mA cm-2 for formate. The glycerol upgrading assisted hydrogen evolution device composed of V2O5/PANI/NF exhibits excellent electrochemical performance at a maximal Faraday efficiency of 82%, ranking among state of the art.

Ni-CeO2 Heterostructure Promotes Hydrogen Evolution Reaction via Tuning of the O-H Bond Length of Adsorbed Water at the Electrolyte/Electrode Interface

Understanding the properties and structure of reactant water molecules at the electrolyte solution/electrode interface is relevant to know the mechanisms of hydrogen evolution reaction (HER). However, this approach has rarely been implemented due to the elusive local microenvironment in the vicinity of the catalyst. Taking the Ni-CeO2 heterostructure immobilized onto carbon paper (Ni-CeO2 /CP) as a model, the dynamic behavior of adsorbed intermediates during the reaction was measured by in situ surface-enhanced infrared absorption spectroscopy with attenuated total reflection configuration (ATR-SEIRAS). Theoretical calculations are used in combination to comprehend the potential causes of increased HER activity. The results show that the O-H bond of adsorbed water at the electrolyte solution/electrode interface becomes longer for promoting the dissociation of water and accelerating the kinetically slow Volmer step. In addition, forming the Ni-CeO2 heterostructure interface optimizes the hydrogen adsorption Gibbs free energy, thus increasing HER activity. Therefore, the Ni-CeO2 /CP electrode exhibits remarkably low HER overpotentials of 37 and 119 mV at 10 and 100 mA cm-2 , which are close to commercial Pt/C (16 and 102.6 mV, respectively).

Chelating Co-reduction Strategy for the Synthesis of High-Entropy Alloy Aerogels

Aerogels, as three-dimensional porous materials, have attracted much attention in almost every field owing to their unique structural properties. Designing high-entropy alloy aerogels (HEAAs) to quinary and above remains an enormous challenge due to the different reduction potentials and nucleation/growth kinetics of different constituent metals. Herein, a novel and universal chelating co-reduction strategy to prepare HEAAs at room temperature in the water phase is proposed. The addition of chelators (ethylenediaminetetraacetic acid tetrasodium salt, sodium citrate, salicylic acid, and 4,4'-bipyridine) with a certain strong coordination capacity can adjust the reduction potential of different metal components, which is the key to synthesize single-phase solid solution alloys successfully. The optimized AgRuPdAuPt HEAA can be an excellent electrocatalyst for hydrogen evolution reaction (HER) with an ultrasmall overpotential of 22 mV at 10 mA cm^-2 and excellent stability for 24 h in an alkaline solution. In situ Raman spectroscopy unveils the enhanced hydrogen evolution reaction mechanism of HEAAs. Overall, this work provides a novel chelating co-reduction strategy for the facile and versatile synthesis and design of advanced HEAAs and broadens the development and utilization of multi-elemental alloy electrocatalysts.

Tailoring a local acid-like microenvironment for efficient neutral hydrogen evolution

Electrochemical hydrogen evolution reaction in neutral media is listed as the most difficult challenges of energy catalysis due to the sluggish kinetics. Herein, the Ir-H_xWO₃ catalyst is readily synthesized and exhibits enhanced performance for neutral hydrogen evolution reaction. H_xWO₃ support is functioned as proton sponge to create a local acid-like microenvironment around Ir metal sites by spontaneous injection of protons to WO₃, as evidenced by spectroscopy and electrochemical analysis. Rationalize revitalized lattice-hydrogen species located in the interface are coupled with H_ad atoms on metallic Ir surfaces via thermodynamically favorable Volmer-Tafel steps, and thereby a fast kinetics. Elaborated Ir-H_xWO₃ demonstrates acid-like activity with a low overpotential of 20 mV at 10 mA cm^-2 and low Tafel slope of 28 mV dec^-1, which are even comparable to those in acidic environment. The concept exemplified in this work offer the possibilities for tailoring local reaction microenvironment to regulate catalytic activity and pathway.

Phase Evolution on the Hydrogen Adsorption Kinetics of NiFe-Based Heterogeneous Catalysts for Efficient Water Electrolysis

Transition metal layered double hydroxides, especially nickel-iron layered double hydroxide (NiFe-LDH) shows significant advancement as efficient oxygen evolution reaction (OER) electrocatalyst but also plays a momentous role as a precursor for NiFe-based hydrogen evolution reaction (HER) catalysts. Herein, a simple strategy for developing Ni-Fe-derivative electrocatalysts via phase evolution of NiFe-LDH under controllable annealing temperatures in an argon atmosphere is reported. The optimized catalyst annealed at 340 ^o C (denoted NiO/FeNi₃ ) exhibits superior HER properties with an ultralow overpotential of 16 mV@10 mA cm^-2 . Density functional theory simulation and in situ Raman analyses reveal that the excellent HER properties of the NiO/FeNi₃ can be attributed to the strong electronic interaction at the interface of the metallic FeNi₃ and semiconducting NiO, which optimizes the H₂ O and H adsorption energies for efficient HER and OER catalytic processes. This work will provide rational insights into the subsequent development of related HER electrocatalysts and other corresponding compounds via LDH-based precursors.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Pinpointing the axial ligand effect on platinum single-atom-catalyst towards efficient alkaline hydrogen evolution reaction

Developing active single-atom-catalyst (SAC) for alkaline hydrogen evolution reaction (HER) is a promising solution to lower the green hydrogen cost. However, the correlations are not clear between the chemical environments around the active-sites and their desired catalytic activity. Here we study a group of SACs prepared by anchoring platinum atoms on NiFe-layered-double-hydroxide. While maintaining the homogeneity of the Pt-SACs, various axial ligands (−F, −Cl, −Br, −I, −OH) are employed via a facile irradiation-impregnation procedure, enabling us to discover definite chemical-environments/performance correlations. Owing to its high first-electron-affinity, chloride chelated Pt-SAC exhibits optimized bindings with hydrogen and hydroxide, which favor the sluggish water dissociation and further promote the alkaline HER. Specifically, it shows high mass-activity of 30.6 A mgPt⁻¹ and turnover frequency of 30.3  H₂ s⁻¹ at 100 mV overpotential, which are significantly higher than those of the state-of-the-art Pt-SACs and commercial Pt/C catalyst. Moreover, high energy efficiency of 80% is obtained for the alkaline water electrolyser assembled using the above catalyst under practical-relevant conditions.

Establishing robust structure/performance correlations is critical for the development of single-atom-catalysts with improved activity. Here, the axial ligand on Pt single-atom-catalyst is precisely adjusted and studied, showing that the ligand’s first electron affinity is crucial for the catalysis.

Enhanced photoelectrochemical performance of ZnO/NiFe-layered double hydroxide for water splitting: Experimental and photo-assisted density functional theory calculations

Hydrogen production technologies have attracted considerable attention with the increasing demand for renewable energy. Among them, the combined action of water electrolysis and solar energy has emerged. In this study, a hydrangea ZnO/NiFe-layered double hydroxide (LDH) heterojunction was synthesized using the two-step hydrothermal method. The resulting ZnO/NiFe-LDH improved the range and intensity of light response, thus meeting the requirement of electrocatalysis and photocatalysis in theory. Moreover, ZnO/NiFe-LDH demonstrated excellent activity in the electrochemical performance test in the presence of light. When used as a water splitting catalyst in a full cell, the cell voltage was 1.632 V, and Faradic efficiency was 99.1%. Moreover, from the in situ Raman and theoretical calculation results, it is possible to conclude that the synthesized ZnO/NiFe-LDH has the property of absorbing light energy, and the introduction of light energy can optimize the bandgap structure of the material and enhance the adsorption capacity of the system, thus significantly reducing the energy required for water splitting reaction. In sum, this study introduced a composition strategy for LDH heterojunction materials and presented a theoretical and experimental investigation of the light influence on the material structure and electrochemical reaction. Furthermore, it is believed that an important future direction of hydrogen production is photo-assisted water splitting.

Direct Electron Transfer from Upconversion Graphene Quantum Dots to TiO2 Enabling Infrared Light-Driven Overall Water Splitting

Utilization of infrared light in photocatalytic water splitting is highly important yet challenging given its large proportion in sunlight. Although upconversion material may photogenerate electrons with sufficient energy, the electron transfer between upconversion material and semiconductor is inefficient limiting overall photocatalytic performance. In this work, a TiO₂/graphene quantum dot (GQD) hybrid system has been designed with intimate interface, which enables highly efficient transfer of photogenerated electrons from GQDs to TiO₂. The designed hybrid material with high photogenerated electron density displays photocatalytic activity under infrared light (20 mW cm⁻²) for overall water splitting (H₂: 60.4 μmol g_cat.⁻¹ h⁻¹ and O₂: 30.0 μmol g_cat.⁻¹ h⁻¹). With infrared light well harnessed, the system offers a solar-to-hydrogen (STH) efficiency of 0.80% in full solar spectrum. This work provides new insight into harnessing charge transfer between upconversion materials and semiconductor photocatalysts and opens a new avenue for designing photocatalysts toward working under infrared light.

Hydrogen evolution reaction mechanism on Ti3C2 MXene revealed by in situ/operando Raman spectroelectrochemistry

MXenes have shown great promise as electrocatalysts for the hydrogen evolution reaction (HER), but their mechanism is still poorly understood. Currently, the benchmark Ti₃C₂ MXene suffers from a large overpotential. In order to reduce this overpotential, modifications must be made to the structure to increase the reaction rate of the H⁺/e^- coupled transfer steps. These modifications heavily depend on understanding the HER mechanism. To remedy this, in situ/operando Raman spectroelectrochemistry combined with density functional theory (DFT) calculations are utilized to probe the HER mechanism of the Ti₃C₂ MXene catalyst in aqueous media. In acidic electrolytes, the -O- termination groups are protonated to form Ti-OH bonds, followed by protonation of the adjacent Ti site, leading to H₂ formation. DFT calculations show that the large overpotential is due to the lack of an optimum balance between O and Ti sites. In neutral electrolytes, H₂O reduction occurs on the surface and leads to surface protonation, followed by H₂ formation. This results in an overcharging of the structure that leads to the observed large HER overpotential. This study provides new insights into the HER mechanisms of MXene catalysts and a pathway forward to design efficient and cost-effective catalysts for HER and related electrochemical energy conversion systems.

Epitaxial Growth of High-Energy Copper Facets for Promoting Hydrogen Evolution Reaction

Copper is known as a conductive metal but an inert catalyst for the hydrogen evolution reaction due to its inappropriate electronic structure. In this work, an active copper catalyst is prepared with high-energy surfaces by adopting the friction stir welding (FSW) technique. FSW can mix the immiscible Fe and Cu materials homogenously and heat them to a high temperature. Resultantly, α-Fe transforms into γ-Fe, and low-energy γ-Fe (100) and (110) surfaces induce the epitaxial growth of high-energy Cu (110) and (100) planes, respectively. After the removal of γ-Fe by acid etching, the copper electrode exposes high-energy surface and exhibits excellent acidic HER activity, even being superior to Pt foil at high current densities (>66 mA cm^-2 ). Density functional theory calculation reveals that the high-energy surface favors the adsorption of hydrogen intermediate, thus accelerating the hydrogen evolution reaction. The epitaxial growth induced by FSW opens a new avenue toward engineering high-performance catalysts. In addition, FSW makes it possible to massively fabricate low-cost catalyst, which is advantageous to industrial application.

Engineering Bimodal Oxygen Vacancies and Pt to Boost the Activity Toward Water Dissociation

Water dissociation is the rate-limiting step of several energy-related reactions due to the high energy barrier required for breaking the oxygen-hydrogen bond. In this work, a bimodal oxygen vacancy (V_O ) catalysis strategy is adopted to boost the efficient water dissociation on Pt nanoparticles. The single facet-exposed TiO₂ surface and NiO_x nanocluster possess two modes of V_O different from each other. In ammonia borane hydrolysis, the highest catalytic activity among Pt-based materials is achieved with the turnover frequency of 618 min^-1 under alkaline-free conditions at 298 K. Theoretical simulation and characterization analyses reveal that the bimodal V_O significantly promotes the water dissociation in two ways. First, an ensemble-inducing effect of Pt and V_O in TiO₂ drives the activation of water molecules. Second, an electron promoter effect induced by the electron transfer from V_O in NiO_x to Pt further enhances the ability of Pt to dissociate water and ammonia borane. This insight into bimodal V_O catalysis establishes a new avenue to rationally design heterogeneous catalytic materials in the energy chemistry field.

Oxygen Vacancy Engineering Synergistic with Surface Hydrophilicity Modification of Hollow Ru Doped CoNi-LDH Nanotube Arrays for Boosting Hydrogen Evolution

With the development of clean hydrogen energy, the cost effective and high-performance hydrogen evolution reaction (HER) electrocatalysts are urgently required. Herein, a green, facile, and time-efficient Ru doping synergistic with air-plasma treatment strategy is reported to boost the HER performance of CoNi-layered double hydroxide (LDH) nanotube arrays (NTAs) derived from zeolitic imidazolate framework nanorods. The Ru doping and air-plasma treatment not only regulate the oxygen vacancy to optimize the electron structure but also increase the surface roughness to improve the hydrophilicity and hydrogen spillover efficiency. Therefore, the air plasma treated Ru doped CoNi-LDH (P-Ru-CoNi-LDH) nanotube arrays display superior HER performance with an overpotential of 29 mV at a current density of 10 mA cm^-2 . Furthermore, by assembling P-Ru-CoNi-LDH as both cathode and anode for two-electrode urea-assisted water electrolysis, a small cell voltage of 1.36 V is needed at 10 mA cm^-2 and can last for 100 h without any obvious activity attenuation that showing outstanding durability. In general, the P-Ru-CoNi-LDH can improve the HER performance from intrinsic electronic structure regulation cooperated with extrinsic surface wettability modification. These findings provide an effective intrinsic and extrinsic synergistic effect avenue to develop high performance HER electrocatalysts, which is potential to be applied to other research fields.

Polypyrrole Hollow Microspheres with Boosted Hydrophilic Properties for Enhanced Hydrogen Evolution Water Dissociation Kinetics

The water dissociation step (H₂O + M + e^- → M - H_ads + OH^-) is a crucial one toward achieving high-performance hydrogen evolution reaction (HER). The application of electronic conducting polymers (ECPs), such as polypyrrole (PPy), as the electrocatalyst for HER is rarely reported because of their poor adsorption energy per water molecule, which hinders the Volmer step. Herein, we strongly enrich PPy hollow microspheres (PPy-HMS) with attractive HER activity by enhancing their hydrophilic properties through hybridization with good water affinity SiO₂. The as-prepared PPy-coated SiO₂ (PPy@SiO₂-HMS) achieves a current density of 10 mA cm^-2 at -123 mV, which is lower than that of pristine PPy-HMS (-192 mV). Raman and X-ray photospectroscopy analyses reveal that the enhanced HER catalytic capability can be attributed to the strong electronic couplings between PPy and SiO₂, and this improves the adsorption energy per water molecule and in turn accelerates the water dissociation kinetics on PPy. This work highlights the potential application of low-cost ECPs as promising electrocatalysts for water electrolysis.

Modulation of electronic structures in two-dimensional electrocatalysts for the hydrogen evolution reaction

The electrocatalytic hydrogen evolution reaction (HER) has attracted substantial attention owing to its important role in realizing economic and sustainable hydrogen production via water electrolysis. Designing two-dimensional (2D) materials with large surface area, highly exposed surface sites and facile charge transport pathways is highly attractive for promoting the HER activity of the earth-abundant catalysts, and conducting rational modulations in the electronic structures is considered to be promising in further optimizing the intrinsic HER activity and thus realizing promoted HER performance. In this Feature Article, we systematically summarize recent progress in the modulation of the electronic structures of 2D HER electrocatalysts via multiple strategies including elemental doping, formation of alloyed structures, defect engineering, facet engineering, phase regulation, interface engineering and hybridization of the nanocatalysts with 2D substrates, and discuss the role of electronic structures in optimizing the intrinsic HER activity of 2D HER catalysts. We anticipate that this Feature Article will offer helpful guidance for oriented design and optimization of efficient electrocatalysts for scalable and economic hydrogen production.