Regulating the Morphology Modification To Prepare the High Charge Separation Efficiency and Visible Light Responsive Dual-Type-II B-CN/H-TiO2/BS-CN Heterojunction for Wastewater Treatment

For the conventional type-II heterojunction photocatalyst, their photocatalytic activity is affected by the limited separation efficiency of electron-hole pairs, exquisitely designed heterojunction photocatalysts are highly prospective materials for inducing charge transfer efficiently. Typically, enhancing the separation efficiency of electron-hole pairs in photocatalysts has been a formidable challenge. Here, the hollow mesoporous TiO2 (H-TiO2), the bulk g-C3N4 (B-CN), and g-C3N4 with bamboo shape (BS-CN) are prepared by simple processes. Among them, it is surprising to find that the band structure of g-C3N4 can be regulated and controlled by adjusting its structure. The B-CN/H-TiO2/BS-CN (CNTOCN) dual-type-II heterojunction photocatalyst and B-CN/H-TiO2 (CNTO) type-II heterojunction photocatalyst are designed to improve the separation efficiency of electron-hole pairs. The superiority of CNTOCN dual-type-II heterojunction photocatalyst is demonstrated by the photocatalysis experiment, the band structure analysis, and the photoelectric characterization. The results show that CNTOCN (0.8428 h-1) has much higher photocatalytic activity than H-TiO2 (0.0812 h-1), B-CN (0.3569 h-1), and CNTO (0.5934 h-1). The improvement of photocatalytic activity is ascribed to the establishment of the dual-type-II heterojunction charge transfer mechanism. This work presents an approach to designing efficient dual-type-II heterojunction photocatalysts for the sustainable conversion of solar energy to photodegrade dyes in dyeing wastewater.

Compositionally engineered Cd-Mo-Se alloyed QDs toward photocatalytic H2O2 production and Cr(VI) reduction with a detailed mechanism and influencing parameters

With the exceptional advantages of safety, greenness, and low cost, photocatalytic H2O2 generation has kindled a wonderful spark, although being severely hampered by the terrible photoinduced exciton recombination, migration, and surface decomposition. Here, employing reflux method, the Cd-Mo-Se quantum dots of varying molar ratios of Cd and Mo were synthesized using thioglycolic acid as the capping ligand to regulate their growth. This type of metal alloying promotes rapid charge migration, improves light harvesting, and reduces the rate of charge recombination. The improved optoelectronic properties and boosted activity of Cd-rich ternary CMSe-1 QDs led to the observed exceptional photocatalytic H2O2 yield of 1403.5 μmol g-1 h-1 (solar to chemical conversion efficiency, 0.27%) under visible light, outperforming the other ternary and Se-based QD photocatalysts. Additionally, CMSe-1 shows 93.6% (2 h) hazardous Cr(VI) photoreduction. The enhanced catalytic performance of CMSe-1 corresponds to effective charge carrier separation and transfer efficiency, well supported by PL, TRPL, and electrochemical measurements. Photocatalytic H2O2 production was also studied under varying experimental conditions and the scavenger test suggests a superoxide radical intermediate 2-step single electron reduction pathway. The catalyst-assisted Cr(VI) reduction is substantiated by the zero-order kinetics as well as the determination of the pHPZC value. The catalyst can be employed for a maximum of four times while retaining its activity, according to the photostability and reusability test outcomes. This research presents interesting approaches for producing ternary QDs and modified systems for efficient photocatalytic H2O2 production and Cr(VI) reduction.

Synthesis of neodymium ferrite incorporated graphitic carbonitride (NdFe2O4@g-C3N4) and its application in the photodegradation of ciprofloxacin and ampicillin in a water system

Purification of antibiotic-contaminated drinking water sources is faced with limitations. Therefore, this study incorporated neodymium ferrite (NdFe2O4) in graphitic carbonitride (g-C3N4) to form NdFe2O4@g-C3N4 as a photocatalyst for removing ciprofloxacin (CIP) and ampicillin (AMP) from aqueous systems. X-ray diffraction (XRD) revealed a crystallite size of 25.15 nm for NdFe2O4 and 28.49 nm for NdFe2O4@g-C3N4. The bandgap is 2.10 and 1.98 eV for NdFe2O4 and NdFe2O4@g-C3N4, respectively. The transmission electron micrograph (TEM) images of NdFe2O4 and NdFe2O4@g-C3N4 gave an average particle size of 14.10 nm and 18.23 nm, respectively. Scanning electron micrograph (SEM) images showed heterogeneous surfaces with irregular-sized particles suggesting agglomeration at the surfaces. NdFe2O4@g-C3N4 (100.00 ± 0.00% for CIP and 96.80 ± 0.80% for AMP) exhibited better photodegradation efficiency towards CIP and AMP than NdFe2O4 (78.45 ± 0.80% for CIP and 68.25 ± 0.60% for AMP) in a process described by pseudo-first-order kinetics. NdFe2O4@g-C3N4 showed a stable regeneration capacity towards degradation of CIP and AMP with a capacity that is above 95% even at the 15th cycle of treatment. The use of NdFe2O4@g-C3N4 in this study revealed its potential as a promising photocatalyst for removing CIP and AMP in water systems.

Noble metal-free doped graphitic carbon nitride (g-C3N4) for efficient photodegradation of antibiotics: progress, limitations, and future directions

Graphitic carbon nitride (g-C₃N₄) is well recognised as one of the most promising materials for photocatalytic activities such as environmental remediation via organic pollution elimination. New methods of nanoscale structure design introduce tunable electrical characteristics and broaden their use as visible light-induced photocatalysts. This paper summarises the most recent developments in the design of g-C₃N₄ with element doping. Various methods of introducing metal and nonmetal elements into g-C₃N₄ have been investigated in order to simultaneously tune the material's textural and electronic properties to improve its response to the entire visible light range, facilitate charge separation, and extend charge carrier lifetime. The degradation of antibiotics is one of the application domains of such doped g-C₃N₄. We expect that this research will provide fresh insights into clear design methods for efficient photocatalysts that will solve environmental challenges in a sustainable manner. Finally, the problems and potential associated with g-C₃N₄-based nanomaterials are discussed. This review is expected to encourage the ongoing development of g-C₃N₄-based materials for greater efficiency in photocatalytic antibiotic degradation.

Architecture and Kinetic Studies of Photocatalytic H2O2 Generation and H2 Evolution through Regulation of Spatial Charge Transfer via Z-Scheme Path over a (001) Facet Engineered TiO2@MXene/B-g-C3N4 Ternary Hybrid

Spatial charge separation and migration are the critical shortcomings dominating the core energy conversion corridors of photocatalytic systems. Here, a biomimetic multi-interfacial architecture providing strong coupled interaction and rapid charge transmission for photostable and competent photocatalytic H2O2 production and H2 evolution is proposed. The triple-hybrid all-solid-state Z-scheme system was formed with the (001) facet exposed TiO2 nanosheets derived from MXene layers and B-g-C3N4 nanosheets (M/(001)TiO2@BCN) through an electrostatic self-assembly strategy with intimate electronic interaction due to Ti orbital modulation and proper stacking among the hybrids. The metallic and highly conductive MXene layers act as solid state electron mediators in the Z-scheme heterojunction that promote electron-hole separation and migration efficiency. Specifically, the MTBCN-12.5 composite provides optimum yield of H2O2 up to 1480.1 μmol h-1 g-1 and a H2 evolution rate of 408.4 μmol h-1 (with ACE 6.7%), which are 4 and 20 fold greater than the pristine BCN, respectively. The enhanced photocatalytic performance is systematically identified by the increased surface area, higher cathodic and anodic current densities of -1.01 and 2.27 mA cm-2, delayed charge recombination as supported by PL and EIS measurement, and excellent photostability. The Z-scheme charge transfer mechanism is validated by time-resolved photoluminescence (TRPL) analysis, cyclic voltametric analysis, and the radical trapping experiment as detected by PL analysis. This research marks a substantial advancement and establishes the foundation for future design ideas in accelerating charge transfer.

Oxygen Vacancy-Mediated Z-Scheme Charge Transfer in a 2D/1D B-Doped g-C3N4/rGO/TiO2 Heterojunction Visible Light-Driven Photocatalyst for Simultaneous/Efficient Oxygen Reduction Reaction and Alcohol Oxidation

Hydrogen peroxide (H₂O₂) is a powerful oxidant that directly or indirectly oxidizes many organic and inorganic contaminants. The photocatalytic generation of H₂O₂ is achieved by using a semiconductor photocatalyst in the presence of alcohol as a proton source. Herein, we have synthesized oxygen vacancy (O_v)-mediated TiO₂/B-doped g-C₃N₄/rGO (TBCN@rGO) ternary heterostructures by a simple hydrothermal technique. Several characterization techniques were employed to explore the existence of oxygen vacancies in the crystal structure and investigate their impact on the optoelectronic properties of the catalyst. Oxygen vacancies offered additional sites for adsorbing molecular oxygen, activating alcohols, and facilitating electron migration from TBCN@rGO to the surface-adsorbed O₂. The defect creation (oxygen vacancy) and Z-scheme mechanistic pathways create a suitable platform for generating H₂O₂ by two-electron reduction processes. The optimized catalyst showed the highest photocatalytic H₂O₂ evolution rate of 172 μmol/h, which is 1.9 and 2.5 times greater than that of TBCN and BCN, respectively. The photocatalytic oxidation of various lignocellulose-derived alcohols (such as furfural alcohol and vanillyl alcohol) and benzyl alcohol was also achieved. Photocatalytic activity data, physicochemical and optoelectronic features, and trapping experiments were conducted to elucidate the structure-activity relationships. The TBCN@rGO acts as a multifunctional Z-scheme photocatalyst having an oxygen vacancy, modulates surface acidity-basicity required for the adsorption and activation of the reactant molecules, and displays excellent photocatalytic performance due to the formation of a large number of active surface sites, increased electrical conductivity, improved charge transfer properties, outstanding photostability, and reusability. The present study establishes a unique strategy for improving H₂O₂ generation and alcohol oxidation activity and also provides insights into the significance of a surface vacancy in the semiconductor photocatalyst.

Inorganic Metal-Oxide Photocatalyst for H2 O2 Production

Hydrogen peroxide (H₂ O₂ ) is a mild but versatile oxidizing agent with extensive applications in bleaching, wastewater purification, medical treatment, and chemical synthesis. The state-of-art H₂ O₂ production via anthraquinone oxidation is hardly considered a cost-efficient and environment-friendly process because it requires high energy input and generates hazardous organic wastes. Photocatalytic H₂ O₂ production is a green, sustainable, and inexpensive process which only needs water and gaseous dioxygen as the raw materials and sunlight as the power source. Inorganic metal oxide semiconductors are good candidates for photocatalytic H₂ O₂ production due to their abundance in nature, biocompatibility, exceptional stability, and low cost. Progress has been made to enhance the photocatalytic activity toward H₂ O₂ production, however, H₂ O₂ photosynthesis is still in the laboratory research phase since the productivity is far from satisfaction. To inspire innovative ideas for boosting the H₂ O₂ yield in photocatalysis, the most well-studied metal oxide photocatalysts are selected and the modification strategies to improve their activity are listed. The mechanisms for H₂ O₂ production over modified photocatalysts are discussed to highlight the facilitating role of the modification methods. Besides, methods for the quantification of H₂ O₂ and associated radical intermediates are provided to guide future studies in this field.

Photocatalytic degradation of lignin by low content g-C3N4 modified TiO2 under visible light

TiO2/g-C3N4 photocatalysts efficiently degraded lignin to obtain small molecule aromatics, which facilitated the efficient utilization of biomass.

A novel Z-scheme Bi-Bi2O3/KTa0.5Nb0.5O3 heterojunction for efficient photocatalytic conversion of N2 to NH3

A novel Z-scheme photocatalyst Bi-Bi2O3/KTa0.5Nb0.5O3 (KTN) composite was prepared by a simple solvothermal method. Compared with KTN, Bi/KTN, and Bi2O3/KTN, Bi-Bi2O3/KTN ternary composite catalyst presented much better photocatalytic ammonia-synthesis efficiency....

Ternary photocatalysts based on MOF-derived TiO2 co-decorated with ZnIn2S4 nanosheets and CdS nanoparticles for effective visible light degradation of organic pollutants

A high-efficiency visible-light-responsive CdS/ZnIn2S4/TiO2 photocatalyst was prepared for the first time by the self-sacrificing template method followed by a two-step chemical bath process.

Robust charge carrier engineering via plasmonic effect and conjugated Π-framework on Au loaded ZnCr-LDH/RGO photocatalyst towards H2 and H2O2 production

Au loaded ZnCr-LDH/RGO ternary photocatalyst for H2 and H2O2 production under visible light illumination.

Surface engineering of copper sulfide-titania-graphitic carbon nitride ternary nanohybrid as an efficient visible-light photocatalyst for pollutant photodegradation

Advanced photocatalyst is a key for photocatalytic water purification in the environmental pollutant remediation. In this study, graphitic carbon nitride (g-CN) modified by CuS and TiO₂ ternary nanohybrid (CuS-TiO₂-g-CN) with close interfacial contact among CuS, TiO₂ and g-CN was fabricated through a facile and green method. Compared to the binary g-CN-based counterparts, the CuS-TiO₂-g-CN possesses multiple photo-generated charge transfers owing to the synergistic action of CuS, TiO₂ and g-CN. And hence the separation efficiency of photo-generated electron-hole pairs can be improved for the CuS-TiO₂-g-CN. The optical and photoelectrochemical measurements prove that the CuS-TiO₂-g-CN has narrower band gap energy and higher transient photocurrent density than those of g-CN and TiO₂-g-CN. Therefore, the CuS-TiO₂-g-CN shows notably higher photocatalytic activity and stability towards the degradation of Rhodamine B (RhB) than g-CN and TiO₂-g-CN under visible-light irradiation. Moreover, a possible visible-light photocatalytic mechanism of CuS-TiO₂-g-CN for degrading RhB was also proposed on the basis of the experimental results and literature reports.