Effects of temperature and polyols on the ciprofloxacin hydrochloride-mediated micellization of sodium dodecyl sulfate

Study on the association and phase separation behavior of surfactants and promethazine hydrochloride: impact of ammonium electrolytes

In the current study, the association and phase separation of cationic tetradecyltrimethylammonium bromide (TTAB) and nonionic Triton X-100 (TX-100) surfactants with promethazine hydrochloride (PMH) were investigated in aqueous ammonium-based solutions. The micellization nature of the TTAB and PMH drug mixture was examined by evaluating critical micelle concentration (CMC) and counterion binding extent (β) at different salt contents and temperatures (298.15-323.15 K). Micelle formation in the TTAB + PMH mixture was enhanced in the presence of ammonium salts, whereas the process was delayed with an increase in temperature in the respective salt solution. With an increase in salt content, the cloud point (CP) of the TX-100 + PMH mixture decreased, which revealed that the respective progression occurred through the salting out phenomenon. In micellization and clouding processes, the changes in free energies ΔG0m and ΔG0c were found to be negative and positive, respectively, demonstrating that the corresponding processes are spontaneous and non-spontaneous. Standard enthalpies (ΔH0m/ΔH0c) and standard entropies (ΔS0m/ΔS0c) for the association and clouding processes, respectively, were also calculated and discussed. The core forces amid TTAB/TX-100 and PMH in the manifestation of electrolytes are dipole-dipole and hydrophobic forces among the employed components according to the values for ΔH0m/ΔH0c and ΔS0m/ΔS0c, respectively.

Physicochemical parameters and modes of interaction associated with the micelle formation of a mixture of tetradecyltrimethylammonium bromide and cefixime trihydrate: effects of hydrotropes and temperature

The interaction between an antibiotic drug (cefixime trihydrate (CMT)) and a cationic surfactant (tetradecyltrimethylammonium bromide (TTAB)) was examined in the presence of both ionic and non-ionic hydrotropes (HTs) over the temperature range of 300.55 to 320.55 K. The values of the critical micelle concentration (CMC) of the TTAB + CMT mixture were experienced to have dwindled with an enhancement of the concentrations of resorcinol (ReSC), sodium benzoate (NaBz), sodium salicylate (NaS), while for the same system, a monotonically augmentation of CMC was observed in aq. 4-aminobenzoic acid (PABA) solution. A gradual increase in CMC, as a function of temperature, was also observed. The values of the degree of counterion binding (β) for the TTAB + CMT mixture were experienced to be influenced by the concentrations of ReSC/NaBz/NaS/PABA and a change in temperature. The micellization process of TTAB + CMT was observed to be spontaneous (negative standard Gibbs free energy change (ΔG0m)) at all conditions studied. Also, the values of standard enthalpy change (ΔH0m) and entropy change (ΔS0m) were found negative and positive, respectively (with a few exceptions), for the test cases indicating an exothermic and enthalpy-entropy directed micellization process. The recommended interaction forces between the components in the micellar system are electrostatic and hydrophobic interactions. In this study, the values of ΔC0m were negative in aqueous NaBz, ReSC, and PABA media, and positive in case of NaS. An excellent compensation scenario between the enthalpy and entropy for the CMT + TTAB mixed system in the investigated HTs solutions is well defined in the current work.

Investigation of the impacts of simple electrolytes and hydrotrope on the interaction of ceftriaxone sodium with cetylpyridinium chloride at numerous study temperatures

Herein, interactions between cetylpyridinium chloride (CPC) and ceftriaxone sodium (CTS) were investigated applying conductivity technique. Impacts of the nature of additives (e.g. electrolytes or hydrotrope (HDT)), change of temperatures (from 298.15 to 323.15 K), and concentration variation of CTS/additives were assessed on the micellization of CPC + CTS mixture. The conductometric analysis of critical micelle concentration (CMC) with respect to the concentration reveals that the CMC values were increased with the increase in CTS concentration. In terms of using different mediums, CMC did not differ much with the increase in electrolyte salt (NaCl, Na2SO4) concentration, but increased significantly with the rise of HDT (NaBenz) amount. In the presence of electrolyte, CMC showed a gentle increment with temperature, while the HDT showed the opposite trend. Obtained result was further correlated with conventional thermodynamic relationship, where standard Gibb's free energy change ( Δ G m o ) , change of enthalpy ( Δ H m o ) , and change of entropy ( Δ S m o ) were utilized to investigate. The Δ G m o values were negative for all the mixed systems studied indicating that the micellization process was spontaneous. Finally, the stability of micellization was studied by estimating the intrinsic enthalpy gain (Δ H m o , ∗ ) and compensation temperature (Tc). Here, CPC + CTS mixed system showed more stability in Na2SO4 medium than the NaCl, while in NaBenz exhibited the lowest stability.

Physico-chemical properties of the association of cetyltrimethylammonium bromide and bovine serum albumin mixture in aqueous-organic mixed solvents

Herein, we have investigated the association behavior of bovine serum albumin (BSA) and cetyltrimethylammonium bromide (CTAB) using the conductivity method in H₂O and H₂O + organic mixed solvents at different temperatures. The association phenomenon was detected from the deviation of the conductivity changes with enhancing the surfactant concentration and changes of numerous physico-chemical properties, such as CMC, α, β and thermodynamic variables (∆G⁰_m, ∆H⁰_m and ∆S⁰_m). The values of CMC for the CTAB + BSA system in 10 % (v/v) solvents follow the trend: CMC_water < CMC_water+DMSO < CMC_water+AN < CMC_water+DX < CMC_water+DMF. The interaction of BSA with CTAB is notably influenced due to a change of temperature and extent of hydration of BSA and surfactant. The obtained values of -∆G⁰_m manifest that the association of BSA and CTAB mixture is a spontaneous process, while the values of -∆G⁰_m in presence of 10 % (v/v) aq. organic solvents come out in the given sequence: -∆G_m^o (H₂O + DMSO) > ∆G_m^o (H₂O + DMF) > -∆G_m^o (H₂O + DX) > -∆G_m^o (H₂O + AN). The H-bonding, ion-dipole, along with the hydrophobic interactions, are believed to be the binding interactions between BSA and CTAB in the study media.

Predicting the aggregation number of cationic surfactants based on ANN-QSAR modeling approaches: understanding the impact of molecular descriptors on aggregation numbers

In this work, a quantitative structure-activity relationship (QSAR) study is performed on some cationic surfactants to evaluate the relationship between the molecular structures of the compounds with their aggregation numbers (AGGNs) in aqueous solution at 25 °C. An artificial neural network (ANN) model is combined with the QSAR study to predict the aggregation number of the surfactants. In the ANN analysis, four out of more than 3000 molecular descriptors were used as input variables, and the complete set of 41 cationic surfactants was randomly divided into a training set of 29, a test set of 6, and a validation set of 6 molecules. After that, a multiple linear regression (MLR) analysis was utilized to build a linear model using the same descriptors and the results were compared statistically with those of the ANN analysis. The square of the correlation coefficient (R ²) and root mean square error (RMSE) of the ANN and MLR models (for the whole data set) were 0.9392, 7.84, and 0.5010, 22.52, respectively. The results of the comparison revealed the efficiency of ANN in detecting a correlation between the molecular structure of surfactants and their AGGN values with a high predictive power due to the non-linearity in the studied data. Based on the ANN algorithm, the relative importance of the selected descriptors was computed and arranged in the following descending order: H-047 > ESpm12x > JGI6> Mor20p. Then, the QSAR data was interpreted and the impact of each descriptor on the AGGNs of the molecules were thoroughly discussed. The results showed there is a correlation between each selected descriptor and the AGGN values of the surfactants.

Influences of NaCl and Na2SO4 on the Micellization Behavior of the Mixture of Cetylpyridinium Chloride + Polyvinyl Pyrrolidone at Several Temperatures

Herein, the conductivity measurement technique is used to determine the interactions that may occur between polyvinyl pyrrolidone (PVP) polymer and cetylpyridinium chloride (CPC) surfactant in the presence of NaCl and Na2SO4 of fixed concentration at variable temperatures (298.15-323.15 K) with an interval of 5 K. In the absence or presence of salts, we observed three critical micelle concentrations (CMC) for the CPC + PVP mixture. In all situations, CMC1 values of CPC + PVP system were found to be higher in water than in attendance of salts (NaCl and Na2SO4). Temperature and additives have the tendency to affect counterion binding values. Various physico-chemical parameters were analyzed and demonstrated smoothly, including free energy (ΔG0m), enthalpy (ΔH0m) and entropy change (ΔS0m). The micellization process is achieved to be spontaneous based on the obtained negative ΔG0m values. The linearity of the ΔHmo and ΔSmo values is excellent. The intrinsic enthalpy gain (ΔH0*m) and compensation temperature (Tc) were calculated and discussed with logical points. Interactions of polymer hydrophobic chains or the polymer + surfactant associated with amphiphilic surface-active drugs can employ a strong impact on the behavior of the gels.

Physico-chemical and spectroscopic investigation of flavonoid dispersed C n TAB micelles

In this study, kaempferol (0.2 m/mmol kg-1) dispersed cationic surfactant micelles were prepared as a function of alkyltrimethylammonium bromide (C n TAB) hydrophobicity (C = 12 to C = 16). The dispersion study of kaempferol in different C n TAB, i.e. dodecyltrimethylammonium bromide (C = 12), tetradecyltrimethylammonium bromide (C = 14) and hexadecyltrimethylammonium bromide (C = 16), was conducted with the physico-chemical properties of density, sound velocity, viscosity, surface tension, isentropic compressibility, acoustic impedance, surface excess concentration and area occupied per molecule and thermodynamic parameters Gibbs free energy, enthalpy and activation energy measured at 298.15 K. These properties were measured with varying concentration of C n TAB from 0.0260 to 0.0305 mol kg-1 in a 10% (w/w) aqueous dimethyl sulfoxide solvent system. The variations in these measured properties have been used to infer the kaempferol dispersion stability via hydrophobic-hydrophilic, hydrophilic-hydrophilic, van der Waals, hydrogen bonding and other non-covalent interactions.

Effects of various media on micellization, adsorption and thermodynamic behaviour of imipramine hydrochloride and antimicrobial surfactant mixtures

The effect of various media (aqueous, NaCl, urea (U) and thiourea (TU)) on the micellization and adsorption activity of varied mixtures of imipramine hydrochloride (IMP) and benzethonium chloride (BZCl) is investigated via tensiometry. In an aqueous medium, the interactions between IMP and BZCl are also evaluated using UV-visible and FTIR spectroscopy. The interaction between components increases with increased mole fraction (α 1) of BZCl in the mixed system (IMP + BZCl). Different parameters, such as micellar and the mixed monolayer component composition, the interaction parameters of the solution and the interface, the activity coefficients of the components in solution and at the interface, and thermodynamic parameters, are computed using different proposed theoretical models (i.e. Clint, Motomura, Rubingh and Rosen). The cmc values obtained for the pure components and mixtures (IMP + BZCl) of all the compositions are found to be less in NaCl than in the aqueous solution while found more in the presence of U or TU. TU is more effective in increasing the cmc of the pure and mixed systems than U. The Gibbs free energy ( Δ G mic ∘ ) values of the studied pure and mixed systems are negative, showing the spontaneous nature of the reaction.

Impacts of polyols and temperature on the micellization, interaction and thermodynamics behavior of the mixture of tetradecyltrimethylammonium bromide and polyvinyl alcohol

Herein, the aggregation manner of the mixture of polyvinyl alcohol (PVA) and tetradecyltrimethylammonium bromide (TTAB) was performed in polyols (glucose, maltose and galactose) media over 300.55–320.55 K temperatures range with 5 K interval through conductivity measurement method. The micelle formation of TTAB + PVA mixture was identified by the assessment of critical micelle concentration (CMC) from the plots of specific conductivity (κ) versus TTAB concentration. The degree of micelle ionization (α), the extent of bound counter ions (β) as well as thermodynamic properties ( Δ G m 0 ${\Delta}{G}_{m}^{0}$ , Δ H m 0 ${\Delta}{H}_{m}^{0}$ and Δ S m 0 ${\Delta}{S}_{m}^{0}$ ) of TTAB + PVA systems have been estimated. The CMC values reveal that the micelle formation of TTAB + PVA mixture experience an enhancement in the manifestation of polyols. The values of free energy of micellization ( Δ G m 0 ${\Delta}{G}_{m}^{0}$ ) are negative for the TTAB + PVA system in aqueous polyols media, suggesting a spontaneous aggregation phenomenon. The Δ H m 0 ${\Delta}{H}_{m}^{0}$ and Δ S m 0 ${\Delta}{S}_{m}^{0}$ values of TTAB + PVA systems direct that the PVA molecule interacts with TTAB through the exothermic, ion-dipole, and hydrophobic interactions. The thermodynamic properties of transfer were also determined for the move of TTAB + PVA mixture from H2O to water + polyols mixed solvents. The values of compensation temperature (T c) and intrinsic enthalpy gain ( Δ H m 0 , ∗ ${\Delta}{H}_{m}^{0,\ast }$ ) were evaluated and discussed for the studied system.

Interaction of cationic surfactant with acid yellow dye in absence/presence of organic and inorganic additives: conductivity and dye solubilization methods

In the present study, the conductometric and dye-solubilization techniques have been utilized to investigate the interaction between an anionic dye (acid yellow 23 [AY]) and a cationic surfactant (cetyltrimethylammonium bromide [CTAB]) in presence of organic (ethanol)/inorganic (NaCl) additives. From the conductometric method, two critical micelle concentrations (cmc) were found for AY + CTAB mixture in an aqueous system and the cmc values were found to undergo a change with the variation of AY concentrations. The cmc values of AY + CTAB systems were observed higher in the alcoholic medium, while the same was found to be lower in the NaCl solutions. The change in cmc of AY + CTAB systems shows an U-like curve with an increase of temperature. The negative free energy of micellization ( Δ G m o ${\Delta}{G}_{m}^{o}$ ) for the AY + CTAB systems has indicated a spontaneous micelle formation in all of the cases studied. The enthalpy ( Δ H m o ${\Delta}{H}_{m}^{o}$ ), as well as the entropy of micellization ( Δ S m o ${\Delta}{S}_{m}^{o}$ ) for the AY + CTAB systems, were assessed and discussed with proper reasoning. Additionally, the enthalpy-entropy compensation parameters were also investigated and illustrated. The solubility of AY and C D was observed to rise linearly with an increase in the concentration of CTAB/NaCl solution. The solubilization capacity (χ) of AY, the molar partition coefficient (K M) amongst the micellar and the aqueous phase, and free energy of solubilization ( Δ G S o ${\Delta}{G}_{S}^{o}$ ) were evaluated and discussed in detail. The former parameters undergo an increase with an increase of NaCl concentrations.

Impact of salts on the phase separation and thermodynamic properties of mixed nonionic surfactants in absence/attendance of polyvinyl alcohol

Mixed surfactant systems are used in different applied fields like pharmaceutical formulation rather than single surfactant. Therefore, the determination of the clouding nature of the triton X-100 (TX-100) + Tween 80 (TW-80) mixture was carried out in H2O and polyvinyl alcohol (PVA). In the occurrence of PVA, the cloud point (CP) values of TX-100 initially enhance with enhancing the concentration of PVA and tend to decrease after a certain concentration. For different ratios of TX-100 and TW-80 mixture having the same concentration of both solutions, CP values increase through the decreasing ratios of TX-100 with/without PVA. In the presence of polymer, at higher ratios of TX-100 than TW-80, the CP values are higher in magnitudes in comparison to the aqueous medium but at lower ratios of TX-100, the value of CP are lower in magnitudes in comparison to the aqueous system. The CP values of the TX-100 + TW-80 mixture in the salt system are lower in magnitudes than the aqueous medium in both the absence/presence of PVA. However, a reduction of CP values was obtained to a large extent for Na2SO4 over NaCl in the case of lower volume ratios of TX-100. Various thermodynamic variables (standard free energy ( Δ G c o ${\Delta}{G}_{c}^{o}$ ), standard enthalpy ( Δ H c o ${\Delta}{H}_{c}^{o}$ ), standard entropy ( Δ S c o ${\Delta}{S}_{c}^{o}$ ) change, thermodynamic parameters of transfer (free energy of transfer ( Δ G c , t o ${\Delta}{G}_{c,t}^{o}$ ), and transfer of enthalpies ( Δ H c , t o ${\Delta}{H}_{c,t}^{o}$ )) of phase transition) were also determined.