Fabrication of resorcinol-based porous resin carbon material and its application in aqueous symmetric supercapacitors

Revisiting the Effect of Pyrolysis Temperature and Type of Activation on the Performance of Carbon Electrodes in an Electrochemical Capacitor

Hierarchical porous carbons are known to enhance the electrochemical features of electrodes in electrochemical capacitors. However, the contribution of surface oxygen and the resulting functionalities and wettability, along with the role of electrical conductivity and degree of amorphous or crystalline nature in the micro-mesoporous carbons, are not yet clear. This article considers the effect of carbonisation temperature (500-900 °C) and the type of activation (CO2, KOH) on the properties mentioned above in case of carbon xerogels (CXs) to understand the resulting electrochemical performances. Depending on the carbonisation temperature, CX materials differ in micropore surface area (722-1078 m2 g-1) while retaining a mesopore surface area ~300 m2 g-1, oxygen content (3-15%, surface oxygen 0-7%), surface functionalities, electrical conductivity (7 × 10-6-8 S m-1), and degree of amorphous or crystalline nature. Based on the results, electrochemical performances depend primarily on electrical conductivity, followed by surface oxygen content and meso-micropore connectivity. The way of activation using a varied extent of CO2 exposure and KOH concentrations played differently in CX in terms of pore connectivity from meso- to micropores and their contributions and degree of oxidation, and resulted in different electrochemical behaviours. Such performances of activated CXs depend solely on micro-mesopore features.

Electrochemical properties of an activated carbon xerogel monolith from resorcinol-formaldehyde for supercapacitor electrode applications

Activated carbon xerogel monoliths were prepared from resorcinol and formaldehyde via a catalyst-free and template-free hydrothermal polycondensation reaction, followed by pyrolysis and activation. The ratio of resorcinol (R) to distilled water (W) was varied to afford an interconnected pore structure with controlled pore size, while the pyrolysis temperature was optimized to give high specific surface area. Activation was carried out at 700 °C after soaking the samples in 6 M KOH aqueous solution. The same process, called "heat treatment", was also carried out without soaking in KOH for comparison. The weight loss upon pyrolysis, activation and heat treatment and the weight gain via KOH soaking were measured. Field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and an N2 sorption instrument were utilized for characterization. Additionally, electrochemical properties were evaluated using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS) with a 3-electrode system, while a 2-electrode system was also employed for selected samples. The highest specific capacitance of 323 F g-1 via GCD at 1 A g-1 was obtained at the R/W ratio of 45 and with 500 °C pyrolysis. In addition, this sample also exhibited 89.4% retention at 20 A g-1 in the current density variation and 100% retention in 5000 cycling tests.