Effect of micro-aerobic process on improvement of anaerobic digestion sewage sludge treatment: flow cytometry and ATP assessment

The Similarities in Microbial and Chemical Patterns of Fermentation in Two Open Environments were Promoted by Using 150-Year-Old Nukadoko as Starters

Nukadoko, a fermented rice bran employed in traditional Japanese pickling, uses lactic acid bacteria to ferment vegetables. Here, we report the microbial and chemical data of a mixture of matured 150-year-old nukadoko and commercially available rice bran placed in two open environments over 29 days. Across the two environments, Loigolactobacillus was identified as the dominant microbial genera in the later stages of fermentation in nukadoko. The period of increase in the relative abundance of Loigolactobacillus correlated with a decrease in pH and Oxidation-Reduction Potential (ORP) values. While the two environments showed a difference in the rate of change in microbial diversity, they shared the common process through which Loigolactobacillus outcompeted adventitious bacteria in nukadoko, as indicated by the alpha and beta diversity index. Thus, the similarities in microbial and chemical data across two open environments during fermentation using starters indicate that starters contribute to the stability of fermentation in open environments.

Developing a sorptive material of cadmium from pyrolysis of hen manure

A large amount of manure is generated from concentrated animal feeding operations (CAFOs), leading to serious environmental issues and hazardous risks from pathogens, such as methicillin-resistant Staphylococcus aureus. Therefore, developing an effective method for manure disposal is essential. Thus, in this study, we suggest the use of CO2 in pyrolysis of hen manure (HM) as an effective method to convert the carbon in HM into syngas (especially carbon monoxide (CO)). HM was used and tested as the model compound. From the results of thermo-gravimetric analysis, the decarboxylation of CaCO3 in HM in the presence of N2 was realized at temperatures ranging from 638 to 754 °C. The Boudouard reaction was observed at ≥ 664 °C in the presence of CO2. Despite the lack of occurrence of the Boudouard reaction, more CO formation was observed in the presence of CO2 at ≥ 460 °C. This was deemed as a homogeneous reaction induced by CO2. Considering the high Ca content of HM, HM biochar in N2 and CO2 were used as adsorbent for removal of Cadmium (Cd), which is toxic heavy metal. The adsorption capacities of HM_N2 and HM_CO2 were 302.4 and 95.7 mg g-1, respectively. The superior performance of HM_N2 is mainly attributed to the presence of Ca(OH)2, which provides favorable (alkaline) conditions for precipitation and ion exchange. Our results indicate the environmental benefits from using CO2. Specifically, CO2 (representative greenhouse gas) converted into fuel. Given this, pyrolysis of HM in the presence of CO2 was achieved at ≤ 640 °C, and the atmospheric condition should be switched from CO2 to N2 at ≥ 640 °C to ensure the decarboxylation of CaCO3.

Optimizing the hydrolysis-acidification stage in municipal wastewater treatment: comparison of immobilized fillers and granular sludge

The decomposition of organic macromolecules in sewage currently benefits substantially from hydrolysis-acidification. The full use of its qualities can help domestic sewage to biodegrade more quickly, which promotes the subsequent aerobic reactions. This study evaluated the hydrolysis-acidification performance of granular sludge and filler in residential sewage. Both forms were highly effective at producing volatile fatty acids (VFAs) at the beginning of the reaction, but the granular sludge gradually disintegrated over time, particularly at low temperatures. The production of VFAs decreased (68.08 mg/L), and the effluent dissolved organic nitrogen (DON) increased (6.23 mg/L). However, the effluent of fillers remained at a lower level (1.3 mg/L) and produced more VFAs (74.13 mg/L). High-throughput sequencing revealed that the filler included a greater quantity of hydrolytic-acidifying bacteria than the granular sludge, which resulted in higher performance. In this study, the optimal form of utilizing hydrolytic acidifying bacteria was discussed to provide a theoretical basis to improve the full utilization of organic matter in domestic sewage and the removal of as much total nitrogen as possible.

Application of flow cytometry for rapid, high-throughput, multiparametric analysis of environmental microbiomes

Quantification of the abundance and understanding of the dynamics of the microbial communities is essential to establish a basis for microbiome characterization. The conventional techniques used for the quantification of microbes are complicated and time-consuming. With scientific advancement, many techniques evolved and came into account. Among them, flow cytometry is a robust, high-throughput technique through which microbial dynamics, morphology, microbial distribution, physiological characteristics, and many more attributes can be studied in a high-throughput manner with comparatively less time and resources. Flow cytometry, when combined with other omics-based methods, offers a rapid and efficient platform to analyze and understand the composition of microbiome at the cellular level. The microbial diversity observed through flow cytometry will not be equivalent to that obtained by sequencing methods, but this integrated approach holds great potential for high throughput characterization of microbiomes. Flow cytometry is regarded as an established characterization tool in haematology, oncology, immunology, and medical microbiology research; however, its application in environmental microbiology is yet to be explored. This comprehensive review aims to delve into the diverse environmental applications of flow cytometry across various domains, including but not limited to bioremediation, landfills, anaerobic digestion, industrial bioprocesses, water quality regulation, and soil quality regulation. By conducting an in-depth analysis, this article seeks to shed light on the potential benefits and challenges associated with the utilization of flow cytometry in addressing environmental concerns.

Microaerobic condition as pretreatment for improving anaerobic digestion: A review

Pretreatment of waste before anaerobic digestion (AD) has been extensively studied during the last decades. One of the biological pretreatments studied is the microaeration. This review examines this process, including parameters and applications to different substrates at the lab, pilot and industrial scales, to guide further improvement in large-scale applications. The underlying mechanisms of accelerating hydrolysis and its effects on microbial diversity and enzymatic production were reviewed. In addition, modelling of the process and energetic and financial analysis is presented, showing that microaerobic pretreatment is commercially attractive under certain conditions. Finally, challenges and future perspectives were also highlighted to promote the development of microaeration as a pretreatment before AD.

Micro-Aerobic Pre-Treatment vs. Thermal Pre-Treatment of Waste Activated Sludge for Its Subsequent Anaerobic Digestion in Semi-Continuous Digesters: A Comparative Study

This article investigates methane production, organic matter removal, and energy by comparing micro-aerobic pre-treatment and thermal pre-treatment of waste-activated sludge (WAS). For micro-aerobic pre-treatment, WAS was pre-treated at 0.35 vvm (volume of air per volume of medium per minute) for 48 h. The data showed over a 30% increase in soluble Chemical Oxygen Demand (COD) and soluble proteins when this pre-treatment was applied. Then, the micro-aerobically pre-treated sludge was mixed with primary sludge and anaerobically digested in semi-continuous digesters with Hydraulic Retention Times (HRT) of 20, 15, and 10 days at 35 °C. We used two digesters as a control: one fed with a mixture of primary sludge (PS) and raw WAS; another fed with a mixture of PS and thermally pre-treated WAS. The results showed a better performance for the digester fed with micro-aerobically pre-treated sludge than the other two at all the HRT tested. The better performance is because of the solubilization of particulate organic matter, as shown at the reactor outlet. Energy consumption analysis showed that micro-aerobic pre-treatment required 32% more energy in a year than thermal pre-treatment. However, if sludge is pre-thickened in a similar way as performed for thermal pre-treatment, then the energy demand required by micro-aerobic pre-treatment is reduced by 41% concerning the thermal pre-treatment; nevertheless, more studies should be performed to verify that methane production and solid reduction advantages are maintained.

Newly isolated lysozyme-producing strain Proteus mirabilis sp. SJ25 reduced the waste activated sludge: Performance and mechanism

To promote aerobic digestion of sludge, a lysozyme-producing strain was screened and identified as Proteus mirabilis sp. SJ25. The results of response surface methodology (RSM) showed that at the temperature of 30.8 °C, pH of 6.69, and the inoculum amount of 2.81%, the sludge reduced by 26.58%. Compared with the control group, the removal efficiency of suspended solids (SS) from sludge in the experimental group increased by 14.60%, the release of soluble chemical oxygen demand (SCOD) increased by 2.21 times, and the release of intracellular substances increased significantly. Actinobacteriota, Chloroflexi, Proteobacteria, Bacteroidota, and Firmicutes were the main phyla involved in the sludge reduction process. Strain SJ25 enhanced the degradation rate of sludge by releasing lysozyme lysis to lyse bacteria, enhancing the metabolism and membrane transport of carbohydrates and amino acids. This study provides a new perspective in the field of efficient degradation of waste sludge.

Intermittent Microaeration Technology to Enhance the Carbon Source Release of Particulate Organic Matter in Domestic Sewage

Domestic sewage treatment plants often have insufficient carbon sources in the influent water. To solve this problem, the commonly used technical means include an additional carbon source, primary sludge fermentation, and excess sludge fermentation, but these methods are uneconomical, unsustainable, and not applicable to small-scale wastewater treatment plants. Intermittent microaeration technology has the advantages of low energy-consumption, ease of application, and low cost, and can effectively promote anaerobic digestion of municipal sludge; however little research has been reported on its use to enhance the carbon sources release of particulate organic matter (POM) from domestic wastewater. Therefore, the effect of intermittent microaeration on the carbon source release of POM was evaluated in this study, with POM as the control test. The results showed that the release concentration of soluble chemical oxygen demand (SCOD) was the highest on day 4 under microaerobic conditions, and the concentrations of SCOD, NH4+-N, and PO43−-P in the liquid phase were 1153, 137.1, and 13 mg/L, respectively. Compared with the control group, the SCOD concentration increased by 34.2%, and the NH4+-N and PO43−-P concentrations decreased by 18.65% and 17.09%, respectively. Intermittent microaeration can effectively promote the growth of Paludibacter, Actinomyces, and Trichococcus hydrolytic fermentation functional bacteria. Their relative abundances increased by 282.83%, 21.77%, and 23.47%, respectively, compared with the control group. It can simultaneously inhibit the growth of acetate-type methanogenic archaea, Methanosaeta and Methanosarcina, with a decrease in relative abundances of 16.81% and 6.63%, respectively. The aforementioned data show that intermittent microaeration can not only promote the hydrolysis of POM, but can also reduce the loss of acetic acid carbon source, which is a cost-effective technical way to enhance the release of a carbon source of particulate organic matter in domestic sewage.

The influence of combined low-strength ultrasonics and micro-aerobic pretreatment process on methane generation and sludge digestion: Lipase enzyme, microbial activation, and energy yield

Low-frequency ultrasonics is a potential technology to reduce the hydrolysis phase period in anaerobic digestion process. In this study, theinfluence of combined low frequency ultrasonics and micro-aerobic (MA) pretreatment on sewage sludge solubilization, enzyme activity and anaerobic digestion were assessed. Initially, the effect of ultrasonic density (0.012, 0.014, 0.016, 0.018, 0.1, 0.12 and 0.14 W/mL) and irradiation time (1, 3, 5, 8, 9, 10 and 12 min) of 20 kHz frequency waves were investigated. Accordingly, the effect of micro-aerobic pretreatment (Air flow rate (AFR) = 0.1, 0.2, 0.3 and 0.5 VVM) within 20, 30, 40.48 and 60 h were examined. In addition, the effect of combined pretreatment on COD solubilization, lipase enzyme activation, ATP, percentage of live bacteria and methane gas production during the anaerobic process were examined. The results showed that the highest lipase activity (14.9 Umol/mL) was obtained under the effect of ultrasonic density of 0.1 W/ml within 9 min. The highest solubilization (65%) was observed under optimal micro-aerobic conditions: AFR = 0.2 (VVM) and micro-aerobic time: 40 h. Combined ultrasonic and micro-aerobic (US + MA) pretreatment increases the solubilization (70%), microbial activity (2080%) and lipase enzymatic activity (129%) compared to individual pretreatment. The Biogas production during anaerobic digestion pretreated with combined methods increased by 193% compared to the control, while the elevated values of biogas production in reactors pretreated by ultrasonic and micro-aerobic pretreatment alone were observed to be 101% and 165%, respectively. The net energy in reactor with the combined pre-treatment methods was calculated to be 1.26 kWh, while this value for control, pretreated ultrasonic and micro-aerobic reactors were obtained to be 0.56, 0.67 and 1.2 kWh, respectively.