Graphitic carbon nitride nanotubes: a new material for emerging applications

Exploring Highly Efficient Broadband Self-Trapped-Exciton Luminophors: from 0D to 3D Materials

The review summarizes our recent reports on brightly-emitting materials with varied dimensionality (3D, 2D, 0D) synthesized using "green" chemistry and exhibiting highly efficient photoluminescence (PL) originating from self-trapped exciton (STE) states. The discussion starts with 0D emitters, in particular, ternary indium-based colloidal quantum dots, continues with 2D materials, focusing on single-layer polyheptazine carbon nitride, and further evolves to 3D luminophores, the latter exemplified by lead-free double halide perovskites. The review shows the broadband STE PL to be an inherent feature of many materials produced in mild conditions by "green" chemistry, outlining PL features general for these STE emitters and differences in their photophysical properties. The review is concluded with an outlook on the challenges in the field of STE PL emission and the most promising venues for future research.

Hierarchical Self-Assembly of Carbon Dots into High-Aspect-Ratio Nanowires

We report a spontaneous and hierarchical self-assembly mechanism of carbon dots prepared from citric acid and urea into nanowire structures with large aspect ratios (>50). Scattering-type scanning near-field optical microscopy (s-SNOM) with broadly tunable mid-IR excitation was used to interrogate details of the self-assembly process by generating nanoscopic chemical maps of local wire morphology and composition. s-SNOM images capture the evolution of wire formation and the complex interplay between different chemical constituents directing assembly over the nano- to microscopic length scales. We propose that residual citrate promotes tautomerization of melamine surface functionalities to produce supramolecular shape synthons comprised of melamine-cyanurate adducts capable of forming long-range and highly directional hydrogen-bonding networks. This intrinsic, heterogeneity-driven self-assembly mechanism reflects synergistic combinations of high chemical specificity and long-range cooperativity that may be harnessed to reproducibly fabricate functional structures on arbitrary surfaces.

A simple and efficient process for the synthesis of 2D carbon nitrides and related materials

We describe here a new process for the synthesis of very high quality 2D Covalent Organic Frameworks (COFs), such a C2N and CN carbon nitrides. This process relies on the use of a metallic surface as both a reagent and a support for the coupling of small halogenated building blocks. The conditions of the assembly reaction are chosen so as to leave the inorganic salts by-products on the surface, to further confine the assembly reaction on the surface and increase the quality of the 2D layers. We found that under these conditions, the process directly returns few layers material. The structure/quality of these materials is demonstrated by extensive cross-characterizations at different scales, combining optical microscopy, Scanning Electron Microscopy (SEM)/Transmission Electron Microscopy (TEM) and Energy Dispersive Spectroscopy (EDS). The availability of such very large, high-quality layers of these materials opens interesting perspectives, for example in photochemistry and electronics (intrinsic transport properties, high gap substrate for graphene, etc...).

Self-assembly of colloidal single-layer carbon nitride

We introduce a new concept of a "bottom-to-top" design of intercalate carbon nitride compounds based on the effects of self-assembly of colloidal single-layer carbon nitride (SLCN) sheets stabilized by tetraethylammonium hydroxide NEt₄OH upon ambient drying of the water solvent. These effects include (i) formation of stage-1 intercalates of NEt₄OH during the ambient drying of SLCN colloids on glass substrates and (ii) the spontaneous formation of layered hexagonally-shaped networks of SLCN sheets on freshly-cleaved mica surfaces. The dynamics of the intercalate formation was followed by in situ X-ray diffraction allowing different stages to be identified, including the deposition of a primary "wet" intercalate of hydrated NEt₄OH and the gradual elimination of excessive water during its ambient drying. The intercalated NEt₄⁺ cations show a specific "flattened" conformation allowing the dynamics of formation and structure of the intercalate to be probed by vibrational spectroscopies. The two-dimensional self-assembly on mica is assumed to be driven both by the internal hexagonal symmetry of heptazine units and by a templating effect of the mica surface.

Modification of glassy carbon electrode with manganese cobalt oxide-cubic like structures incorporated graphitic carbon nitride sheets for the voltammetric determination of 2,4,6 -trichlorophenol

Novel cube-like transition metal oxide embedded on graphitic carbon nitride (MCO@GCN) formed a hybrid composite via hydrothermal assisted sonochemical synthesis. The synthesized composite was examined with various physical characterizations such as morphological SEM, EDX, XRD, and FT-IR spectroscopy. The electrocatalytic activity of MCO@GCN composite was further investigated when used  to modify a glassy carbon electrode (GCE). The electrochemical sensor was investigated using modified MCO@GCN/GCE towards environmental pollutant 2,4,6-trichlorophenol (2,4,6-TCP) detection with at a potential of (+ 0.654 V vs Ag/AgCl) in pH-7. The structural features have favored a high charge transfer ratio with excellent conductivity which showed a low detection limit (LOD) of 0.0068 μM and sensitivity of 23.57 μA·μM^-1·cm^-2 comprising a wide linear working range of 0.01-1720 μM by using differential pulse voltammetry. Besides, the MCO@GCN/GCE displayed excellent selectivity , repeatability, reproducibility, storage, and operational stability. Notably, the proposed MCO@GCN/GCE was validated with different environmental samples (tap, river, and industrial water) with RSD 0.62-2.86% and 96.51-99.66% (n = 3) recovery.

Tailoring g-C3N4 with Lanthanum and Cobalt Oxides for Enhanced Photoelectrochemical and Photocatalytic Activity

Herein, the synthesis, characterization, and photoelectrochemical and photocatalytic characteristics of hydrothermally prepared La2O3–g-C3N4, CoO–g-C3N4, and La2O3–CoO–g-C3N4 are discussed. The XRD analysis and crystalline phases unveiled the impregnation of La2O3 and CoO into g-C3N4. The microscopic analysis supports the formation of g-C3N4 nanoflakes and La2O3 and CoO nanoparticles embedded homogeneously in the La2O3–CoO–g-C3N4 nanocomposite, whereas the EDX comprehended their respective elemental composition and ratios. A bandgap energy of 2.38 eV for La2O3–CoO–g-C3N4 was calculated using the Tauc plot method, complementing high visible-light activity. The solar-driven water-splitting reaction exhibited significant photocurrent efficiency (~3.75 mA/cm2), augmenting the hydrogen generation by La2O3–CoO–g-C3N4 compared to that by pure g-C3N4, La2O3–g-C3N4, and CoO–g-C3N4 in 0.5 M Na2SO4 electrolyte. The synergistic effect of La2O3 and CoO impregnation with g-C3N4 led to effective division of the photogenerated charge transporters, enhancing the photocatalytic hydrogen generation by the photocatalysts. Furthermore, photocatalytic pollutant removal, namely greater than 90% decomposition of methylene blue (MB) from water, was investigated with a pseudo-first-order reaction kinetics under 1 sun visible-light irradiation. Thus, La2O3–CoO–g-C3N4 nanocomposite was found to be a prospective material for harnessing solar energy.

Graphite-like Carbon Nitride Nanotube for Electrochemiluminescence Featuring High Efficiency, High Stability, and Ultrasensitive Ion Detection Capability

Herein, for the first time, we introduced a novel electrochemiluminescence (ECL) luminophore based on a one-dimensional g-C₃N₄ nanotube using K₂S₂O₈ as the coreactant. The g-C₃N₄ nanotube/K₂S₂O₈ couple displayed very satisfactory ECL performance, i.e., an ECL efficiency (Φ_ECL) of 437% (vs 100% for the Ru(bpy)₃²⁺/K₂S₂O₈ reference) and excellent ECL stability (the relative standard deviation (RSD) = 0.78%). By contrast, Φ_ECL and RSD of the control g-C₃N₄ nanosheet/K₂S₂O₈ couple were merely 196% and 45.34%, respectively. The mechanism study revealed that the g-C₃N₄ nanotube features a large surface area and much lower interfacial impedance in the porous microstructure, which are beneficial for accelerating the charge transfer rate and stabilizing charge/excitons for ECL. Moreover, using the g-C₃N₄ nanotube/K₂S₂O₈ system as a sensing platform, excellent Cu²⁺ detection capability was also achieved. Our work thus triggers a promising g-C₃N₄ nanomaterial system toward ECL application.

Photocatalytic degradation of tetracycline by Phosphorus-doped carbon nitride tube combined with peroxydisulfate under visible light irradiation

Photocatalysis has been regarded as a kind of environmentally friendly advanced oxidation process to eliminate pollutants. In this work, Phosphorus-doped carbon nitride tube (PCN) was synthesized via a hydrothermal calcination method and applied to degrade tetracycline (TC) through combing with peroxydisulfate (PDS) under visible light irradiation. Experimental results showed that the optimized catalysts PCN-5 exhibited superior degradation performance and reusability for TC degradation. 96.4% TC could be degraded for optimal PCN-5 with 0.3 g·L^-1 catalysts and 1.0 g·L^-1 PDS under visible light within 60 min. In addition, the degradation rate constant for TC of PCN + PDS + Vis system was still above 85% after five uses. Radical trapping experiment indicating that O₂^·- is the dominant radical for TC degradation. The findings of this work revealed the potential application of the PCN + PDS + Vis system toward degrading contaminants in wastewater.

Emerging Cocatalysts on g-C3 N4 for Photocatalytic Hydrogen Evolution

Over the past few decades, graphitic carbon nitride (g-C₃ N₄ ) has arisen much attention as a promising candidate for photocatalytic hydrogen evolution reaction (HER) owing to its low cost and visible light response ability. However, the unsatisfied HER performance originated from the strong charge recombination of g-C₃ N₄ severely inhibits the further large-scale application of g-C₃ N₄ . In this case, the utilization of cocatalysts is a novel frontline in the g-C₃ N₄ -based photocatalytic systems due to the positive effects of cocatalysts on supressing charge carrier recombination, reducing the HER overpotential, and improving photocatalytic activity. This review summarizes some recent advances about the high-performance cocatalysts based on g-C₃ N₄ toward HER. Specifically, the functions, design principle, classification, modification strategies of cocatalysts, as well as their intrinsic mechanism for the enhanced photocatalytic HER activity are discussed here. Finally, the pivotal challenges and future developments of cocatalysts in the field of HER are further proposed.

Single-layer carbon nitride: synthesis, structure, photophysical/photochemical properties, and applications

This Perspective provides a critical summary of the current state of the art in the synthesis and properties of polyheptazine single-layer carbon nitride (SLCN). The summary combines the authors' research and literature reports on SLCN concerning the synthesis of single-layer polyheptazine sheets, light absorption and emission by SLCN, photochemical and photocatalytic properties of SLCN as well as examples of applications of SLCN sheets as "building blocks" in heterostructures with nanocrystalline semiconductors and metals. The Perspective is concluded with an outlook discussing the most promising directions for further studies and applications of SLCN and related composites.

Molybdenum impregnated g-C3N4 nanotubes as potentially active photocatalyst for renewable energy applications

Molybdenum (Mo) impregnated g-C3N4 (Mo-CN) nanotubes are fabricated via a thermal/hydrothermal process to augment photoelectrochemical properties during solar-driven water-splitting (SDWS) reactions. Graphitic-C3N4 is an attractive material for photocatalysis because of its suitable band energy, high thermal and chemical stability. The FE-SEM and HR-TEM comprehend the nanotube-like morphology of Mo-CN. The spectroscopic characterization revealed bandgap energy of 2.63 eV with high visible-light activity. The x-ray diffraction of pristine g-C3N4 and Mo-CN nanotubes discloses the formation of triazine-based nanocrystalline g-C3N4, which remains stable during hydrothermal impregnation of Mo. Furthermore, Mo-CN nanotubes possess high sp2-hybridized nitrogen content, and metallic/oxidized Mo nanoparticles (in a ratio of 1:2) are impregnated into g-C3N4. The XPS analysis confirms C, N, and Mo for known atomic and oxidation states in Mo-CN. Furthermore, high photocurrent efficiency (~ 5.5 mA/cm2) is observed from 5%-Mo-CN nanotubes. That displays efficient SDWS by 5%-Mo-CN nanotubes than other counterparts. Impedance spectroscopy illustrated the lowest charge transfer resistance (Rct) of 5%-Mo-CN nanotubes, which further confirms the fast electron transfer kinetics and efficient charge separation resulting in high photocurrent generation. Hence, 5%Mo-CN composite nanotubes can serve as a potential photocatalytic material for viable solar-driven water splitting.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Advanced Two-Dimensional Heterojunction Photocatalysts of Stoichiometric and Non-Stoichiometric Bismuth Oxyhalides with Graphitic Carbon Nitride for Sustainable Energy and Environmental Applications

Semiconductor-based photocatalysis has been identified as an encouraging approach for solving the two main challenging problems, viz., remedying our polluted environment and the generation of sustainable chemical energy. Stoichiometric and non-stoichiometric bismuth oxyhalides (BiOX and BixOyXz where X = Cl, Br, and I) are a relatively new class of semiconductors that have attracted considerable interest for photocatalysis applications due to attributes, viz., high stability, suitable band structure, modifiable energy bandgap and two-dimensional layered structure capable of generating an internal electric field. Recently, the construction of heterojunction photocatalysts, especially 2D/2D systems, has convincingly drawn momentous attention practicably owing to the productive influence of having two dissimilar layered semiconductors in face-to-face contact with each other. This review has systematically summarized the recent progress on the 2D/2D heterojunction constructed between BiOX/BixOyXz with graphitic carbon nitride (g-C3N4). The band structure of individual components, various fabrication methods, different strategies developed for improving the photocatalytic performance and their applications in the degradation of various organic contaminants, hydrogen (H2) evolution, carbon dioxide (CO2) reduction, nitrogen (N2) fixation and the organic synthesis of clean chemicals are summarized. The perspectives and plausible opportunities for developing high performance BiOX/BixOyXz-g-C3N4 heterojunction photocatalysts are also discussed.