Electrochemical oxidation of resorcinol: mechanistic insights from experimental and computational studies

Methylene blue molecularly imprinted polymer for melatonin determination in urine and saliva samples

A highly sensitive and rapid electrochemical sensor was developed for detecting melatonin using a molecularly imprinted polymer (MIP) with methylene blue as the functional monomer and melatonin as the template. The MIP was synthesized via a simple electropolymerization process that did not require an initiating reagent. The sensor demonstrated good selectivity for melatonin against common interferences such as lactate, cytosine, cytidine, urea, ascorbic acid, creatine, creatinine, serotonin, and tryptophan. Melatonin detection was achieved at a potential of 0.60 V vs. Ag/AgCl with a sensitivity of 138.8 ± 4.7 µA µM‒1 in the linear range 0.097 - 200 µM and a limit of detection of 29 nM (3SB/m). The sensor exhibited excellent reproducibility and repeatability for both within (intra) and between (inter) electrodes (%RSD < 3% for n = 3). The sensor was applied to authentic urine and saliva samples with recoveries of 103 ± 1% and 102 ± 1%, respectively.

Microporous carbon for fast and simple electrochemical detection of imidacloprid insecticide in fruit and water samples

Herein, a fast and sensitive electrochemical sensor was developed for imidacloprid detection using low-cost disposable microporous carbon screen-printed electrodes. The electrochemical behaviour of imidacloprid at the microporous material was investigated in detail. The developed sensor allowed imidacloprid detection in the linear range of 0.00-1.00 mM with a sensitivity of 14.43 ± 0.42 μA mM^-1 and a detection limit of 2.54 μM (3s _B/m). The sensor showed excellent selectivity and high tolerance to possible interference from other tested insecticides and ions. Excellent repeatability (3.42%, n = 3) and reproducibility (2.23%, n = 3) were demonstrated. Application of the sensor in various fruit and water samples without any treatment showed 96.2-103.0% recoveries. The developed sensor further revealed that the most effective method for removing imidacloprid residue from fruit samples was via washing with a mixture of 5% w/v NaCl and 5% w/v bicarbonate at 40 °C.

Hydrothermally Grown MoS2 as an Efficient Electrode Material for the Fabrication of a Resorcinol Sensor

Recently, the active surface modification of glassy carbon electrodes (GCE) has received much attention for the development of electrochemical sensors. Nanomaterials are widely explored as surface-modifying materials. Herein, we have reported the hydrothermal synthesis of molybdenum disulfide (MoS₂) and its electro-catalytic properties for the fabrication of a resorcinol sensor. Structural properties such as surface morphology of the prepared MoS₂ was investigated by scanning electron microscopy and phase purity was examined by employing the powder X-ray diffraction technique. The presence of Mo and S elements in the obtained MoS₂ was confirmed by energy-dispersive X-ray spectroscopy. Finally, the active surface of the glassy carbon electrode was modified with MoS₂. This MoS₂-modified glassy carbon electrode (MGC) was explored as a potential candidate for the determination of resorcinol. The fabricated MGC showed a good sensitivity of 0.79 µA/µMcm² and a detection limit of 1.13 µM for the determination of resorcinol. This fabricated MGC also demonstrated good selectivity, and stability towards the detection of resorcinol.

Microporous carbon in the selective electro-oxidation of molecular biomarkers: uric acid, ascorbic acid, and dopamine

Herein, we demonstrate the superior electrocatalytic activities of microporous carbon in the oxidation of three molecular biomarkers, ascorbic acid (AA), dopamine (DA), and uric acid (UA), which are co-present in biological fluids.

Specific sensing of resorcin based on the hierarchical porous nanoprobes constructed by cuttlefish-derived biomaterials through differential pulse voltammetry

The specific detection of resorcin from its isomers is a current research hotspot. Thus in our work, a ternary hierarchical porous nanoprobe has been constructed based on the combination of cuttlefish ink and bimetallic Au@Ag nanoclusters for the specific sensing of resorcin. Briefly, through electrostatic interaction, Au@Ag core-shell nanoclusters are immobilized on the surface of polydopamine extracted from cuttlefish, which is turned into nitrogen-doped porous carbon functionalized by bimetallic Au@Ag by topological transformation subsequently. Afterward, an electrochemical sensor is fabricated based on the nanoprobes for specifically determining resorcin in solution by differential pulse voltammetry, and the linear detection ranges of the sensor are 1-100 μM and 1.2-4 mM while the detection limit reaches 0.06 μM. Meanwhile, the sensing mechanism of resorcin by the pre-fabricated sensor is detailedly studied by density functional theory to obtain a clear electrochemical process. Besides, the selectivity, stability, plus reproducibility of the pre-fabricated sensor have been also tested, and the determinations for resorcin in real environmental water samples have also been performed with good recoveries, revealing the auspicious application potential in the environmental monitoring.

MoS2 quantum dots and titanium carbide co-modified carbon nanotube heterostructure as electrode for highly sensitive detection of zearalenone

A novel electrochemical sensor has been fabricated for sensitive determination of zearalenone (ZEA) in food samples based on molybdenum disulfide quantum dots (MoS₂ QDs) and two-dimensional titanium carbide (2D-Ti₃C₂T_x MXene) co-modified multi-walled carbon nanotube (MWCNT) heterostructure. Physical and electrochemical characterizations reveal that 2D-Ti₃C₂T_x and MoS₂ QDs co-modified MWCNTs yields synergistic signal amplification effect, together with large specific surface area and excellent conductivity for the heterostructure, endowing the developed sensor with high detection performance to ZEA. Under optimized conditions, the sensor shows a wide linear range from 3.00 to 300 ng mL^-1 and a low limit of detection (LOD) of 0.32 ng mL^-1_, which is far lower than the maximum residue limits (MRLs) settled by the European Commission. In addition, it exhibits excellent selectivity, high reproducibility with a relative standard deviation (RSD) of 1.1%, and good repeatability (RSD 1.1%). In real sample analysis recoveries ranged from 94.8 to 105% showing the proposed electrochemical sensor has high potential in practical applications. This work presents an effective and valuable pathway for the use of novel heterostructure in the biosensing field.

Tuning Electrocatalytic Aptitude by Incorporating α-MnO2 Nanorods in Cu-MOF/rGO/CuO Hybrids: Electrochemical Sensing of Resorcinol for Practical Applications

In this study, Cu-MOF/rGO/CuO/α-MnO₂ nanocomposites have been fabricated by a one-step hydrothermal method and used in the voltammetric detection of resorcinol (RS). The poor conductivity of MOFs in the field of electrochemical sensing is still a major challenge. A series of Cu-MOF/rGO/CuO/α-MnO₂ nanocomposites have been synthesized with varying fractions of rGO and with a fixed amount of α-MnO₂ via a facile method. These nanocomposites are well characterized using some sophisticated characterization techniques. The as-prepared nanohybrids have strongly promoted the redox reactions at the electrode surface due to their synergistic effects of improved conductivity, high electrocatalytic activity, an enlarged specific surface area, and a plethora of nanoscale level interfacial collaborations. The electrode modified with Cu-MOF/rGO/CuO/α-MnO₂ has revealed superior electrochemical properties demonstrating linear differential pulse voltammetry (DPV) responses from a 0.2 to 22 μM RS concentration range (R² = 0.999). The overall results of this sensing podium have shown excellent stability, good recovery, and a low detection limit of 0.2 μM. With excellent sensing performance achieved, the practicability of the sensor has been evaluated to detect RS in commercial hair color samples as well as in tap water and river water samples. Therefore, we envision that our hybrid nanostructures synthesized by the structural integration strategy will open new horizons in material synthesis and biosensing platforms.