Self-healing solid polymer electrolyte based on imine bonds for high safety and stable lithium metal batteries

Self-healing, antibiofouling and anticorrosion properties enabled by designing polymers with dynamic covalent bonds and responsive linkages

Coating metal structures with a protective material is a popular strategy to prevent their deterioration due to corrosion. However, maintaining the barrier properties of coatings after their mechanical damage is challenging. Herein, we prepared multifunctional coatings with self-healing ability to conserve their anticorrosion performance after damage. The coating was formed by blending synthesized redox-responsive copolymers with the ability to release a corrosion inhibitor upon the onset of corrosion with synthesized self-healing polyurethanes containing disulfide bonds. The corrosion rate of steel substrates coated with a blend is approximately 24 times lower than that of steel coated with only self-healing polyurethane. An exceptional healing efficiency, as high as 95%, is obtained after mechanical damage. The antibiofouling property against bacterial and microalgal attachments on coatings is facilitated by the repellent characteristic of fluorinated segments and the biocidal activity of the inhibitor moieties in the copolymer.

Rigid-flexible coupling network solid polymer electrolytes for all-solid-state lithium metal batteries

Poor mechanical strength at working temperature and low ionic conductivity seriously hinder the application of poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) in high performance all-solid-state lithium metal batteries (LMBs). Here, we design and prepare a series of rigid-flexible coupling network SPEs (RFN-SPEs) with soft poly(ethylene glycol) (PEG) chains and rigid crosslinkers containing the benzene structure. Compared with soft crosslinkers, rigid crosslinkers provide the same amount of active crosslinking points with smaller molecular weight, and meanwhile enhance the mechanical strength of the network. Therefore, based on the rigid crosslinkers, RFN-SPEs exhibit synchronously improved ionic conductivity and mechanical strength. With these RFN-SPEs, symmetrical cells can be cycled for over 2100 h at 0.5 mA cm-2. Meanwhile, stable cycling and high-rate capability could be achieved for LMBs, revealing that SPEs with the rigid-flexible coupling network are promising electrolyte systems for all-solid-state LMBs.

Glass Fiber Reinforced Epoxy-Amine Thermosets and Solvate IL: Towards New Composite Polymer Electrolytes for Lithium Battery Applications

To effectively use (Li) lithium metal anodes, it is becoming increasingly necessary to create membranes with high lithium conductivity, electrochemical and thermal stabilities, as well as adequate mechanical properties. Composite gel polymer electrolytes (CGPE) have emerged as a promising strategy, offering improved ionic conductivity and structural performance compared to polymer electrolytes. In this study, a simple and scalable approach was developed to fabricate a crosslinked polyethylene oxide (PEO)-based membrane, comprising two different glass fiber reinforcements, in terms of morphology and thickness. The incorporation of a solvated ionic liquid into the developed membrane enhances the ionic conductivity and reduces flammability in the resulting CGPE. Galvanostatic cycling experiments demonstrate favorable performance of the composite membrane in symmetric Li cells. Furthermore, the CGPE demonstrated electrochemical stability, enabling the cell to cycle continuously for more than 700 h at a temperature of 40 °C without short circuits. When applied in a half-cell configuration with lithium iron phosphate (LFP) cathodes, the composite membrane enabled cycling at different current densities, achieving a discharge capacity of 144 mAh·g^-1. Overall, the findings obtained in this work highlight the potential of crosslinked PEO-based composite membranes for high-performance Li metal anodes, with enhanced near room temperature conductivity, electrochemical stability, and cycling capability.

Self-Healing Polymer Electrolytes for Next-Generation Lithium Batteries

The integration of polymer materials with self-healing features into advanced lithium batteries is a promising and attractive approach to mitigate degradation and, thus, improve the performance and reliability of batteries. Polymeric materials with an ability to autonomously repair themselves after damage may compensate for the mechanical rupture of an electrolyte, prevent the cracking and pulverization of electrodes or stabilize a solid electrolyte interface (SEI), thus prolonging the cycling lifetime of a battery while simultaneously tackling financial and safety issues. This paper comprehensively reviews various categories of self-healing polymer materials for application as electrolytes and adaptive coatings for electrodes in lithium-ion (LIBs) and lithium metal batteries (LMBs). We discuss the opportunities and current challenges in the development of self-healable polymeric materials for lithium batteries in terms of their synthesis, characterization and underlying self-healing mechanism, as well as performance, validation and optimization.

Self-Healing Solid Polymer Electrolyte for Room-Temperature Solid-State Lithium Metal Batteries

Poor room-temperature ionic conductivities and narrow electrochemical stable windows severely hinder the application of conventional poly(ethylene oxide)-based (PEO-based) solid polymer electrolytes (SPEs) for high-energy-density lithium metal batteries (LMBs). Herein, we designed and synthesized a PEO-based self-healing solid polymer electrolyte (SHSPE) via dynamically cross-linked imine bonds for safe, flexible solid LMBs. The constructed dynamic networks endow this SPE with fascinating intrinsic self-healing ability and excellent mechanical properties (extensibility > 500% and stress >130 kPa). More importantly, this SHSPE exhibits ultrahigh ionic conductivity (7.48 × 10^-4 S cm^-1 at 25 °C) and wide ESW (5.0 V vs Li/Li⁺). As a result, Li||Li symmetrical cells with the SHSPE showed reliable stability in a >1200 h cycling test under room temperature. The assembled Li|SHSPE|LiFePO₄ cell maintained a discharge capacity of 126.4 mAh g^-1 after 300 cycles (0.1C, 27 °C). This work highlights a promising strategy for next-generation room-temperature solid-state LMBs.