Cyclic metal(oid) clusters control platinum-catalysed hydrosilylation reactions: from soluble to zeolite and MOF catalysts

Covalent bonding of N-hydroxyphthalimide on mesoporous silica for catalytic aerobic oxidation of p-xylene at atmospheric pressure

The surface of SBA-15 mesoporous silica was modified by N-hydroxyphthalimide (NHPI) moieties acting as immobilized active species for aerobic oxidation of alkylaromatic hydrocarbons. The incorporation was carried out by four original approaches: the grafting-from and grafting-onto techniques, using the presence of surface silanols enabling the formation of particularly stable O-Si-C bonds between the silica support and the organic modifier. The strategies involving the Heck coupling led to the formation of NHPI groups separated from the SiO2 surface by a vinyl linker, while one of the developed modification paths based on the grafting of an appropriate organosilane coupling agent resulted in the active phase devoid of this structural element. The successful course of the synthesis was verified by FTIR and 1H NMR measurements. Furthermore, the formed materials were examined in terms of their chemical composition (elemental analysis, thermal analysis), structure of surface groups (13C NMR, XPS), porosity (low-temperature N2 adsorption), and tested as catalysts in the aerobic oxidation of p-xylene at atmospheric pressure. The highest conversion and selectivity to p-toluic acid were achieved using the catalyst with enhanced availability of non-hydrolyzed NHPI groups in the pore system. The catalytic stability of the material was additionally confirmed in several subsequent reaction cycles.

Soluble individual metal atoms and ultrasmall clusters catalyze key synthetic steps of a natural product synthesis

Metal individual atoms and few-atom clusters show extraordinary catalytic properties for a variety of organic reactions, however, their implementation in total synthesis of complex organic molecules is still to be determined. Here we show a 11-step linear synthesis of the natural product (±)-Licarin B, where individual Pd atoms (Pd1) catalyze the direct aerobic oxidation of an alcohol to the carboxylic acid (steps 1 and 6), Cu2-7 clusters catalyze carbon-oxygen cross couplings (steps 3 and 8), Pd3-4 clusters catalyze a Sonogashira coupling (step 4) and Pt3-5 clusters catalyze a Markovnikov hydrosylilation of alkynes (step 5), as key reactions during the synthetic route. In addition, the new synthesis of Licarin B showcases an unexpected selective alkene hydrogenation with metal-free NaBH4 and an acid-catalyzed intermolecular carbonyl-olefin metathesis as the last step, to forge a trans-alkene group. These results, together, open new avenues in the use of metal individual atoms and clusters in organic synthesis, and confirm their exceptional catalytic activity in late stages during complex synthetic programmes.

Ag2(0) dimers within a thioether-functionalized MOF catalyze the CO2 to CH4 hydrogenation reaction

Ultrasmall silver clusters in reduced state are difficult to synthesize since silver atoms tend to rapidly aggregate into bigger entities. Here, we show that dimers of reduced silver (Ag₂) are formed within the framework of a metal-organic framework provided with thioether arms in their walls (methioMOF), after reduction with NaBH₄ of the corresponding Ag⁺-methioMOF precursor. The resulting Ag₂-methioMOF catalyzes the methanation reaction of carbon dioxide (CO₂ to CH₄ hydrogenation reaction) under mild reaction conditions (1 atm CO₂, 4 atm H₂, 140 °C), with production rates much higher than Ag on alumina and even comparable to the state-of-the-art Ru on alumina catalyst (Ru-Al₂O₃) under these reaction conditions, according to literature results.

Tunable Aryl Alkyl Ionic Liquid Supported Synthesis of Platinum Nanoparticles and Their Catalytic Activity in the Hydrogen Evolution Reaction and in Hydrosilylation

Tunable aryl alkyl ionic liquids (TAAILs) are ionic liquids (ILs) with a 1-aryl-3-alkylimidazolium cation having differently substituted aryl groups. Herein, nine TAAILs with the bis(trifluoromethylsulfonyl)imide anion are utilized in combination with and without ethylene glycol (EG) as reaction media for the rapid microwave synthesis of platinum nanoparticles (Pt-NPs). TAAILs allow the synthesis of small NPs and are efficient solvents for microwave absorption. Transmission electron microscopy (TEM) shows that small primary NPs with sizes of 2 nm to 5 nm are obtained in TAAILs and EG/TAAIL mixtures. The Pt-NPs feature excellent activity as electrocatalysts in the hydrogen evolution reaction (HER) under acidic conditions, with an overpotential at a current density of 10 mA cm^-2 as low as 32 mV vs the reversible hydrogen electrode (RHE), which is significantly lower than the standard Pt/C 20% with 42 mV. Pt-NPs obtained in TAAILs also achieved quantitative conversion in the hydrosilylation reaction of phenylacetylene with triethylsilane after just 5 min at 200 °C.

Sweet, Sugar-Coated Hierarchical Platinum Nanostructures for Easy Support, Heterogenization and Separation

Metal nanoparticles are increasingly gaining interest in the field of heterogeneous catalysis. Here, we present a novel strategy for synthesizing sugar-coated platinum nanostructures (SC-Pt-NS) from the carbohydrates sucrose and D(-)-fructose. In the synthesis from a mixture of H2PtCl6·6H2O, the carbohydrate in an ionic liquid (IL) yielded primary particles of a homogeneous average size of ~10 nm, which were aggregated to hierarchical Pt nanostructures of ~40–65 nm and surrounded or supported by the carbohydrate. These sugar-coated platinum nanostructures present a facile way to support and heterogenize nanoparticles, avoid leaching and enable easier separation and handling. The catalytic activity of the SC-Pt-NS was shown in the hydrosilylation test reaction of phenylacetylene with triethylsilane, where very high turnover frequency (TOF) values of up to 87,200 h−1 could be achieved, while the platinum metal leaching into the product was very low.

Parts-per-million of ruthenium catalyze the selective chain-walking reaction of terminal alkenes

The chain–walking of terminal alkenes (also called migration or isomerization reaction) is currently carried out in industry with unselective and relatively costly processes, to give mixtures of alkenes with significant amounts of oligomerized, branched and reduced by–products. Here, it is shown that part–per–million amounts of a variety of commercially available and in–house made ruthenium compounds, supported or not, transform into an extremely active catalyst for the regioselective migration of terminal alkenes to internal positions, with yields and selectivity up to >99% and without any solvent, ligand, additive or protecting atmosphere required, but only heating at temperatures >150 °C. The resulting internal alkene can be prepared in kilogram quantities, ready to be used in nine different organic reactions without any further treatment.

The chain-walking of terminal alkenes is an industrially relevant reaction. Here, the authors show that part-per-million amounts of a variety of ruthenium compounds catalyze the reaction in yields and selectivity up to >99%, without any solvent or additive.

Evidence for the “cocktail” nature of platinum-catalyzed alkyne and alkene hydrosilylation reactions

Evidence of the involvement of a “cocktail”-type catalytic system in the alkyne and alkene hydrosilylation reaction in the presence of platinum on a carbon support is reported.

Platinum(II) Di-ω-alkenyl Complexes as "Slow-Release" Precatalysts for Heat-Triggered Olefin Hydrosilylation

We describe the synthesis, characterization, and catalytic hydrosilylation activity of platinum(II) di-ω-alkenyl compounds of stoichiometry PtR₂, where R = CH₂SiMe₂(vinyl) (1) or CH₂SiMe₂(allyl) (2), and their adducts with 1,5-cyclooctadiene (COD), dibenzo[a,e]cyclooctatetraene (DBCOT), and norbornadiene (NBD), which can be considered as slow-release sources of the reactive compounds 1 and 2. At loadings of 0.5 × 10^-6-5 × 10^-6 mol %, 1-COD is an active hydrosilylation catalyst that exhibits heat-triggered latency: no hydrosilylation activity occurs toward many olefin substrates even after several hours at 20 °C, but turnover numbers as high as 200000 are seen after 4 h at 50 °C, with excellent selectivity for formation of the anti-Markovnikov product. Activation of the Pt^II precatalyst occurs via three steps: slow dissociation of COD from 1-COD to form 1, rapid reaction of 1 with silane, and elimination of both ω-alkenyl ligands to form Pt⁰ species. The latent catalytic behavior, the high turnover number, and the high anti-Markovnikov selectivity are a result of the slow release of 1 from 1-COD at room temperature, so that the concentration of Pt⁰ during the initial stages of the catalysis is negligible. As a result, formation of colloidal Pt, which is known to cause side reactions, is minimized, and the amounts of side products are very small and comparable to those seen for platinum(0) carbene catalysts. The latent reaction kinetics and high turnover numbers seen for 1-COD after thermal triggering make this compound a potentially useful precatalyst for injection molding or solvent-free hydrosilylation applications.

A thiol–ene click reaction with preservation of the Si–H bond: a new approach for the synthesis of functional organosilicon compounds

This work presents an approach for the preparation of functional hydrosilanes.