Defects and defect engineering in Soft Matter

Visualizing the Heterogeneity in Homogeneous Supramolecular Polymers

The dynamic properties of supramolecular polymers enable new functionality beyond the limitations of conventional polymers. The mechanism of the monomer exchange between different supramolecular polymers is proposed to be closely associated with local disordered domains within the supramolecular polymers. However, a direct detection of such heterogeneity has never been experimentally probed. Here, we present the direct visualization of the local disordered domains in the backbone of supramolecular polymers by a super-resolution microscopy technique: Nile Red-based spectrally resolved point accumulation for imaging in nanoscale topography (NR-sPAINT). We investigate the local disordered domains in trisamide-based supramolecular polymers comprising a (co)assembly of benzene-1,3,5-tricarboxamide (BTA) and a variant with one of the amide bonds inverted (iBTA). The NR-sPAINT allows us to simultaneously map the spatial distribution and polarity of the local disordered domains along the polymers with a spatial precision down to ∼20 nm. Quantitative autocorrelation and cross-correlation analysis show subtle differences in the spatial distribution of the disordered domains between polymers composed of different variants of BTA monomers. Further, statistical analysis unraveled high heterogeneity in monomer packing at both intra- and interpolymer levels. The results reported here demonstrate the necessity of investigating the structures in soft materials at nanoscale to fully understand their intricacy.

Colloidal model for nucleation and aggregation in one dimension: Accessing the interaction parameters

Through a one-dimensional colloidal model for epitaxial growth, we characterize the nucleation and aggregation processes occurring in a gap between adjacent islands. The timescales associated with deposition, diffusion, aggregation, and nucleation inside the gap are studied in terms of the parameters defining the interaction between colloidal particles. Numerical results from molecular-dynamics (MD) simulations are compared with analytical models and good agreement is found between both data sets. The results for the timescales are used to calculate the associated rates to generate kinetic Monte Carlo (KMC) simulations, which allow exploring larger systems and longer timescales in comparison with MD simulations. The KMC simulations reproduce the global behavior of the densities of islands and monomers as well as the gap length distribution between adjacent islands.

Shapelet-based orientation and defect identification method for nanostructured surface imaging

Structure-property relations are of fundamental importance for continued progress in materials research. Determining these relationships for nanomaterials introduces additional challenges, especially when nanostructure is present, either through self-assembly or nano-lithographic processes. Recent advances have been made for quantification of nanostructured surfaces, for which many robust experimental imaging methods exist. One promising approach is based on the use ofshapelet functionsfor image analysis, which may be used as a reduced basis for surface pattern structure resulting from a broad range of phenomena (e.g. self-assembly). These shapelet-based methods enable automated quantification of nanostructured images, guided by the user/researcher, providing pixel-level information of local order without requiring detailed knowledge of order symmetries. In this work, enhancements to the existing shapelet-basedresponse distance methodare developed which enable further analysis of local order, including quantification oflocal orientationand identification oftopological defects. The presented shapelet-based methods are applied to a representative set of images of self-assembled surfaces from experimental characterization techniques including scanning electron microscopy, atomic force microscopy, and transmission electron microscopy. These methods are shown to be complementary in implementation and, importantly, provide researchers with a robust and generalized computational approach to comprehensively quantify nanostructure order, including local orientation and boundaries within well-aligned grains.

Photo-Controllable Smart Hydrogels for Biomedical Application: A Review

Nowadays, smart hydrogels are being widely studied by researchers because of their advantages such as simple preparation, stable performance, response to external stimuli, and easy control of response behavior. Photo-controllable smart hydrogels (PCHs) are a class of responsive hydrogels whose physical and chemical properties can be changed when stimulated by light at specific wavelengths. Since the light source is safe, clean, simple to operate, and easy to control, PCHs have broad application prospects in the biomedical field. Therefore, this review timely summarizes the latest progress in the PCHs field, with an emphasis on the design principles of typical PCHs and their multiple biomedical applications in tissue regeneration, tumor therapy, antibacterial therapy, diseases diagnosis and monitoring, etc. Meanwhile, the challenges and perspectives of widespread practical implementation of PCHs are presented in biomedical applications. This study hopes that PCHs will flourish in the biomedical field and this review will provide useful information for interested researchers.

Defect-Induced Secondary Crystals Drive Two-Dimensional to Three-Dimensional Morphological Evolution in the Co-Self-Assembly of Polyferrocenylsilane Block Copolymer and Homopolymer

Bottom-up fabrication protocols for uniform 3D hierarchical structures in solution are rare. We report two different approaches to fabricate uniform 3D spherulites and their precursors using mixtures of poly(ferrocenyldimethylsilane) (PFS) block copolymer (BCP) and PFS homopolymer (HP). Both protocols are designed to promote defects in 2D assemblies that serve as intermediate structures. In a multistep seeded growth protocol, we add the BCP/HP mixture to (1D) rod-like PFS micelles in a selective solvent as first-generation seeds. This leads to 2D platelet structures. If this step is conducted at a high supersaturation, secondary crystals form on the basal surface of these platelets. Co-crystallization and rapid crystallization of BCP/HP promote the formation of defects that act as nucleation sites for secondary crystals, resulting in multilayer platelets. This is the key step. The multilayer platelets serve as second-generation seeds upon subsequent addition of BCP/HP blends and, with increasing supersaturation, lead to the sequential formation of uniform (3D) hedrites, sheaves, and spherulites. Similar structures can also be obtained by a simple one-pot direct self-assembly (heating-cooling-aging) protocol of PFS BCP/HP blends. In this case, for a carefully chosen but narrow temperature range, PFS HPs nucleate formation of uniform structures, and the annealing temperature regulates the supersaturation level. In both protocols, the competitive crystallization kinetics of HP/BCP affects the morphology. Both protocols exhibit broad generality. We believe the morphological transformation from 2D to 3D structures, regulated by defect formation, co-crystallization, and supersaturation levels, could apply to various semicrystalline polymers. Moreover, the 3D structures are sufficiently robust to serve as recoverable carriers for nanoparticle catalysts, exhibiting valuable catalytic activity and opening new possibilities for applications requiring exquisite 3D structures.

Microbial cellulosic pad encompassing alpha-arbutin in Tragacanth gum as the controlled delivery system

This research focuses on preparing a natural-based drug delivery system for α-arbutin (AR) as a skin lightening. Bacterial cellulose nanofibers (BC) pad was used for controlled-AR release through two approaches. First was the dip-drying method (P-BC), in which AR cross-linked to BC pads using citric acid (CA). The second was simultaneously entrapping of AR in Tragacanth gum (AR-TG) and stabilized on BC (BC-T) through the ultrasonic-assisted microemulsion method. UV-Vis spectra revealed better control of AR release in BC-T in the first hour. High cell viability (above 70 %) of the pads containing 1-3 % AR was reported using MTT assay. The in-vitro permeation study indicated the proper AR penetration in the treated pads. The Fickian diffusion model was determined as a fitted model for all pads in the drug release kinetics. FTIR, XRD, and TGA analyses further characterized the pads. FESEM images verified AR-TG and BC structures with average diameters of 410.7 ± 25.4 and 34.5 ± 7.51 nm, respectively. The hydrophilicity and mechanical properties of the pads were also investigated. Finally, the high biocompatibility, initial controlled release, and proper permeation suggested BC-T as a more promising delivery platform for AR.

Enhanced Rupture Force in a Cut-Dispersed Double-Network Hydrogel

The Kirigami approach is an effective way to realize controllable deformation of intelligent materials via introducing cuts into bulk materials. For materials ranging from ordinary stiff materials such as glass, ceramics, and metals to soft materials, including ordinary hydrogels and elastomers, all of them are all sensitive to the presence of cuts, which usually act as defects to deteriorate mechanical properties. Herein, we study the influence of the cuts on the mechanical properties by introducing "dispersed macro-scale cuts" into a model tough double network (DN) hydrogel (named D-cut gel), which consists of a rigid and brittle first network and a ductile stretchable second network. For comparison, DN gels with "continuous cuts" having the same number of interconnected cuts (named C-cut gel) were chosen. The fracture tests of D-cut gel and C-cut gel with different cut patterns were performed. The fracture observation revealed that crack blunting occurred at each cut tip, and a large wrinkle-like zone was formed where the wrinkles were parallel to the propagation direction of the cut. By utilizing homemade circular polarizing optical systems, we found that introducing dispersed cuts increases the rupture force by homogenizing the stress around the crack tip surrounding every cut, which reduces stress concentration in one certain cut. We believe this work reveals the fracture mechanism of tough soft materials with a kirigami cut structure, which should guide the design of advanced soft and tough materials along this line.

Interplay Between Hydrogen Bonding and Electron Transfer in Mixed Valence Assemblies of Triarylamine Trisamides

Hydrogen-bonding interactions are assumed to play a critical role in the long-range transport of light or charge recently observed in supramolecular assemblies of C₃ -symmetrical discotic molecules. Herein, the structure of mixed valence assemblies formed by irradiating triarylamine trisamide (TATA) molecules was determined by multifarious techniques under various conditions with the aim of probing the interplay between the hydrogen bonding network and the rate of electron transport in different states (solution, gel, film). Irradiation was performed under initial states that vary by the degree of association of TATA monomers through hydrogen bonds. Firstly, a significant shift of the N-H and C=O stretching frequencies was observed by FTIR upon irradiation thus revealing an overlooked signature of TATA⋅+ species and interacting mixed valence aggregates. Secondly, gels and films both mostly consist of hydrogen-bonded TATA polymers but their EPR spectra recorded at 293 K reveal very different behaviors: localized electrons in the gels versus fully delocalized electrons in the films. Hydrogen bonding thus appears as a necessary but not sufficient condition to get fast electron transfer rates and a packing of the TATA monomers particularly suitable for charge transport is assumed to exist in the solid state. Finally, defects in the hydrogen bonding network are detected upon increasing the number of radical species in the mixed valence assemblies present in the film state without impeding the delocalization of the unpaired electrons. A delicate balance between hydrogen bonds and packing is thus necessary to get supramolecular polarons in mixed valence TATA assemblies.

Polarity and chirality control of an active fluid by passive nematic defects

Much like passive materials, active systems can be affected by the presence of imperfections in their microscopic order, called defects, that influence macroscopic properties. This suggests the possibility to steer collective patterns by introducing and controlling defects in an active system. Here we show that a self-assembled, passive nematic is ideally suited to control the pattern formation process of an active fluid. To this end, we force microtubules to glide inside a passive nematic material made from actin filaments. The actin nematic features self-assembled half-integer defects that steer the active microtubules and lead to the formation of macroscopic polar patterns. Moreover, by confining the nematic in circular geometries, chiral loops form. We find that the exact positioning of nematic defects in the passive material deterministically controls the formation and the polarity of the active flow, opening the possibility of efficiently shaping an active material using passive defects.

Progress in the self-assembly of organic/inorganic polyhedral oligomeric silsesquioxane (POSS) hybrids

This Review describes recent progress in the self-assembly of organic/inorganic POSS hybrids derived from mono-, di-, and multi-functionalized POSS cages. We highlight the self-assembled structures and physical properties of giant surfactants and chain-end- and side-chain-type hybrids derived from mono-functionalized POSS cages; main-chain-type hybrids derived from di-functionalized POSS cages; and star-shaped hybrids derived from multi-functionalized POSS cages; with various polymeric attachments, including polystyrene, poly(methyl methacrylate), phenolic, PVPh, and polypeptides.

Luminescence-enhanced conjugated polymer dots through thermal treatment for cell imaging

Conjugated polymer dots (Pdots) are often used as excellent fluorescent probes in the biomedical field. In the process of preparing Pdots, the rapid change of the solvent polarity will result in a messy and defective stacking of the polymer chains in the particle, and these stacking defects of the polymer chains may weaken its luminescence properties. Here, we try to optimize the stacking of the conjugated polymer chains by the thermal annealing treatment. After the low temperature thermal treatment, the fluorescence intensity of Pdots can be enhanced by about 11%-29%, and Pdots maintain their original stability and biosafety. We used transmission electron microscopy (TEM) and single particle fluorescence imaging to reveal the possible mechanism of the chain stacking optimization process, that is, the thermal annealing process of Pdots is the competition between internal chain rearrangement in the particle and particle aggregation. The luminescence-enhanced Pdots exhibit good cellular imaging performance. These results prove that it is feasible to extend the thermal annealing treatment from planar polymer devices to polymer nanoparticles. It provides the possibility to realize stable and complex biological imaging applications using Pdots with a simple molecular structure, and a mature improvement scheme for the mass preparation of Pdots.

Control of Extrinsic Porosities in Linked Metal-Organic Polyhedra Gels by Imparting Coordination-Driven Self-Assembly with Electrostatic Repulsion

The linkage of metal-organic polyhedra (MOPs) to synthesize porous soft materials is one of the promising strategies to combine processability with permanent porosity. Compared to the defined internal cavity of MOPs, it is still difficult to control the extrinsic porosities generated between crosslinked MOPs because of their random arrangements in the networks. Herein, we report a method to form linked MOP gels with controllable extrinsic porosities by introducing negative charges on the surface of MOPs that facilitates electrostatic repulsion between them. A hydrophilic rhodium-based cuboctahedral MOP (OHRhMOP) with 24 hydroxyl groups on its outer periphery can be controllably deprotonated to impart the MOP with tunable electrostatic repulsion in solution. This electrostatic repulsion between MOPs stabilizes the kinetically trapped state, in which an MOP is coordinated with various bisimidazole linkers in a monodentate fashion at a controllable linker/MOP ratio. Heating of the kinetically trapped molecules leads to the formation of gels with similar colloidal networks but different extrinsic porosities. This strategy allows us to design the molecular-level networks and the resulting porosities even in the amorphous state.

Droplet-like Defect Annihilation Mechanisms in Hexagonal Cylinder-Forming Block Copolymers

The annihilation of typical individual defects in hexagonal cylinder-forming block copolymers is investigated using the self-consistent field theory (SCFT) in conjunction with the string method. Usually, defect removal in two-dimensional hexagonal patterns involves reorganizing the cylindrical domains. Unlike atoms in solid crystals, the self-assembled cylindrical domains of block copolymers are "soft". Thus, the kinetic motions of the cylindrical domains resemble liquid droplets. Dislocations in hexagonal patterns are eliminated via creating and removing cylindrical domains. Our results show that new cylindrical domains are created via either a nucleation-like process or a fission-like process, whereas excessive domains are eliminated via a fusion-like or evaporation-like process. For weakly segregated block copolymers, the nucleation-like and evaporation-like processes are preferred.

Salt-induced stability and modified interfacial energetics in self-faceting emulsion droplets

HYPOTHESIS

The counterintuitive temperature-controlled self-faceting of water-suspended, surfactant-stabilized, liquid oil droplets provides new opportunities in engineering of smart liquids, the properties of which are controllable by external stimuli. However, many emulsions exhibiting self-faceting phenomena have limited stability due to surfactant precipitation. The emulsions' stability may be enhanced, and their inter-droplet electrostatic repulsion tuned, through controlled charge screening driven by varying-concentration added salts. Moreover, in many technologically-relevant situations, salts may already exist in the emulsion's aqueous phase. Yet, salts' impact on self-faceting effects has never been explored. We hypothesize that the self-faceting transitions' temperatures, and stability against surfactant precipitation, of ionic-surfactants-stabilized emulsions are significantly modified by salt introduction.

EXPERIMENTS

We explore the temperature-dependent impact of NaCl and CsCl salt concentration on the emulsions' phase diagrams, employing optical microscopy of emulsion droplet shapes and interfacial tension measurements, both sensitive to interfacial phase transitions.

FINDINGS

A salt concentration dependent increase in the self-faceting transition temperatures is found, and its mechanism elucidated. Our findings allow for a significant enhancement of the emulsions' stability, and provide the physical understanding necessary for future progress in research and applications of self-faceting phenomena in salt-containing emulsions.

Mesoscopic Modeling of a Highly-Ordered Sanidic Polymer Mesophase and Comparison With Experimental Data

Board-shaped polymers form sanidic mesophases: assemblies of parallel lamellae of stacked polymer backbones separated by disordered side chains. Sanidics vary significantly with respect to polymer order inside their lamellae, making them “stepping stones” toward the crystalline state. Therefore, they are potentially interesting for studying crystallization and technological applications. Building on earlier mesoscopic models of the most disordered sanidics Σ_d, we focus on the other extreme, near-crystalline order, and develop a generic model that captures a highly ordered Σ_r mesophase. Polymers are described by generic hindered-rotation chains. Anisotropic nonbonded potentials, with strengths comparable to the thermal energy, mimic board-like monomer shapes. Lamellae equilibrated with Monte Carlo simulations, for a broad range of model parameters, have intralamellar order typical for Σ_r mesophases: periodically stacked polymers that are mutually registered along their backbones. Our mesophase shows registration on both monomer and chain levels. We calculate scattering patterns and compare with data published for highly ordered sanidic mesophases of two different polymers: polyesters and polypeptoids. Most of the generic structural features that were identified in these experiments are present in our model. However, our mesophase has correlations between chains located in different lamellae and is therefore closer to the crystalline state than the experimental samples.

Defect-controlled softness, diffusive permeability, and mesh-topology of metallo-supramolecular hydrogels

Hydrogels are polymer networks swollen in water; they are suitable materials for biomedical applications such as tissue engineering and drug delivery. In the latter, the controlled diffusion of small diffusants inside the network is essential, as it determines the release mechanism of the drug. In general, the diffusion inside a polymer network is controlled by its mesh-size. Here, we actively control the diffusivity and also the softness of metallo-supramolecular hydrogels via the network mesh-topology by introducing connectivity defects. A model polymer network is realized based on a 4-arm poly(ethylene glycol) (pEG) where each arm is capped with terpyridine moieties that are capable of forming metallo-supramolecular complexes with zinc ions. In this model network, we insert 8-arm pEG macromolecules that are functionalized with terpyridine at different ratios to create connectivity defects. With an increasing amount of 8-arm pEG, the polymer network forms more loops, as quantified by double quantum-NMR. This doped network shows an enhanced self-diffusivity of the building block molecules within the network, as examined by fluorescence recovery after photobleaching, and a higher softness, as investigated by oscillatory shear rheology. With these findings, we show that it is possible to tune the diffusivity and softness of hydrogels with defects in a rational fashion.

An Overview on Recent Progress of the Hydrogels: From Material Resources, Properties to Functional Applications

Hydrogels, as the most typical elastomer materials with three-dimensional network structures, have attracted wide attention owing to their outstanding features in fields of sensitive stimulus response, low surface friction coefficient, good flexibility and bio-compatibility. Because of numerous fresh polymer materials (or polymerization monomers), hydrogels with various structure diversities and excellent properties are emerging, and the development of hydrogels is very vigorous over the past decade. This review focuses on state-of-the-art advances, systematically reviews the recent progress on construction of novel hydrogels utilized several kinds of typical polymerization monomers, and explores the main chemical and physical cross-linking methods to develop the diversity of hydrogels. Following the aspects mentioned above, the classification and emerging applications of hydrogels, such as pH response, ionic response, electrical response, thermal response, biomolecular response, and gas response, are extensively summarized. Finally, we have done this review with the promises and challenges for the future evolution of hydrogels and their biological applications. cross-linking methods; functional applications; hydrogels; material resources This article is protected by copyright. All rights reserved.

Controlling Exchange Pathways in Dynamic Supramolecular Polymers by Controlling Defects

Supramolecular fibers composed of monomers that self-assemble directionally via noncovalent interactions are ubiquitous in nature, and of great interest in chemistry. In these structures, the constitutive monomers continuously exchange in-and-out the assembly according to a well-defined supramolecular equilibrium. However, unraveling the exchange pathways and their molecular determinants constitutes a nontrivial challenge. Here, we combine coarse-grained modeling, enhanced sampling, and machine learning to investigate the key factors controlling the monomer exchange pathways in synthetic supramolecular polymers having an intrinsic dynamic behavior. We demonstrate how the competition of directional vs. nondirectional interactions between the monomers controls the creation/annihilation of defects in the supramolecular polymers, from where monomers exchange proceeds. This competition determines the exchange pathway, dictating whether a fiber statistically swaps monomers from the tips or from all along its length. Finally, thanks to their generality, our models allow the investigation of molecular approaches to control the exchange pathways in these dynamic assemblies.

Screw dislocation-induced pyramidal crystallization of dendron-like macromolecules featuring asymmetric geometry

We report herein that dendron-shaped macromolecules AB n crystallize into well-ordered pyramid-like structures from mixed solvents, instead of spherical motifs with curved structures, as found in the bulk. The design of the asymmetric molecular architecture and the choice of mixed solvents are applied as strategies to manipulate the crystallization process. In mixed solvents, the solvent selection for the Janus macromolecule and the existence of dominant crystalline clusters contribute to the formation of flat nanosheets. Whereas during solvent evaporation, the bulkiness of the asymmetric macromolecules easily creates defects within 2D nanosheets which lead to their spiral growth through screw dislocation. The size of the nanosheets and the growth into 2D nanosheets or 3D pyramidal structures can be regulated by the solvent ratio and solvent compositions. Moreover, macromolecules of higher asymmetry generate polycrystals of lower orderliness, probably due to higher localized stress.

Mode division multiplexing for multiple particles noncontact simultaneous trap

We propose and demonstrate an optical trap on the basis of a normal single-mode fiber (SMF), which is used to trap two particles in the axial direction at the same time without contact based on mode division multiplexing technology. We design and manufacture a tapered fiber probe. The LP₁₁ mode beam is excited by docking a normal SMF to a 980 nm SMF with a 2 µm offset. Then the beams of LP₀₁ and LP₁₁ are both transmitted in the fiber. To converge the LP₁₁ mode beam, a SMF with a tapered end is used to produce a cage for trapping the first microparticle. This particle acts as a lens to converge the LP₀₁ mode beam to trap the second microparticle. We verify the feasibility of trapping two particles simultaneously through simulation. With this function, the proposed optical trap is easier to manipulate different individual particles for comparison and testing, which can promote the development of the biological, biophysical, colloidal, and soft matter fields.

Phase-field model for a weakly compressible soft layered material: morphological transitions on smectic-isotropic interfaces

A coupled phase-field and hydrodynamic model is introduced to describe a two-phase, weakly compressible smectic (layered phase) in contact with an isotropic fluid of different density. A non-conserved smectic order parameter is coupled to a conserved mass density in order to accommodate non-solenoidal flows near the smectic-isotropic boundary arising from density contrast between the two phases. The model aims to describe morphological transitions in smectic thin films under heat treatment, in which arrays of focal conic defects evolve into conical pyramids and concentric rings through curvature dependent evaporation of smectic layers. The model leads to an extended thermodynamic relation at a curved surface that includes its Gaussian curvature, non-classical stresses at the boundary and flows arising from density gradients. The temporal evolution given by the model conserves the overall mass of the liquid crystal while still allowing for the modulated smectic structure to grow or shrink. A numerical solution of the governing equations reveals that pyramidal domains are sculpted at the center of focal conics upon a temperature increase, which display tangential flows at their surface. Other cases investigated include the possible coalescence of two cylindrical stacks of smectic layers, formation of droplets, and the interactions between focal conic domains through flow.