Using RAFT Polymerization Methodologies to Create Branched and Nanogel-Type Copolymers

This review aims to highlight the most recent advances in the field of the synthesis of branched copolymers and nanogels using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is a reversible deactivation radical polymerization technique (RDRP) that has gained tremendous attention due to its versatility, compatibility with a plethora of functional monomers, and mild polymerization conditions. These parameters lead to final polymers with good control over the molar mass and narrow molar mass distributions. Branched polymers can be defined as the incorporation of secondary polymer chains to a primary backbone, resulting in a wide range of complex macromolecular architectures, like star-shaped, graft, and hyperbranched polymers and nanogels. These subcategories will be discussed in detail in this review in terms of synthesis routes and properties, mainly in solutions.

Design of Microstructure-Engineered Polymers for Energy and Environmental Conservation

With the ever-growing demand for sustainability, designing polymeric materials using readily accessible feedstocks provides potential solutions to address the challenges in energy and environmental conservation. Complementing the prevailing strategy of varying chemical composition, engineering microstructures of polymer chains by precisely controlling their chain length distribution, main chain regio-/stereoregularity, monomer or segment sequence, and architecture creates a powerful toolbox to rapidly access diversified material properties. In this Perspective, we lay out recent advances in utilizing appropriately designed polymers in a wide range of applications such as plastic recycling, water purification, and solar energy storage and conversion. With decoupled structural parameters, these studies have established various microstructure-function relationships. Given the progress outlined here, we envision that the microstructure-engineering strategy will accelerate the design and optimization of polymeric materials to meet sustainability criteria.

Hydrophobic Biodegradable Hyperbranched Copolymers with Excellent Marine Diatom Resistance

As the utilization of degradable polymer coatings increased, the accompanying trade-off between good degradability and high-efficiency antidiatom adhesion due to their hydrophobic nature remains unresolved. The study presents a new hydrophobic surface-fragmenting coating consisting of degradable hyperbranched polymers (hereafter denoted as h-LLA_x) synthesized by reversible complexation-mediated copolymerization with isobornyl acrylate (IBOA) and divinyl-functional oligomeric poly(l-lactide) (OLLA-V₂), both derived from biomass, that exhibited superior resistance (∼0 cell mm^-2) to marine diatom Navicula incerta (N. incerta) attachment with higher OLLA content. The combined impact of the microscale hollow semisphere micelles that self-assembled degradable hyperbranched copolymers and hydrolysis-driven self-renewable surfaces following immersion in seawater may account for the remarkable resistance of h-LLA_x coatings against N. incerta. Detailed investigations were conducted across multiple perspectives, from hydrolytic degradation to broad-spectrum antibacterial attachment to ecotoxicity assessment. The excellent features of high resistance to marine diatoms and bacterial attachment, degradability, and environmental friendliness make the as-prepared h-LLA_x coatings widely sought after for antifouling coating applications.

Degradable Vinyl Polymers for Combating Marine Biofouling

ConspectusMarine organisms such as barnacle larvae and spores of algae adhere to underwater surfaces leading to marine biofouling. This phenomenon has numerous adverse impacts on marine industries and maritime activities. Due to the diversity of fouling organisms and the complexity of the marine environment, it is a huge challenge to combat marine biofouling, which limits the development and utilization of marine resources. Since the International Marine Organization banned the use of tributyltin self-polishing copolymer (SPC) coatings in 2008, the development of an environmentally friendly and efficient anti-biofouling polymer has been the most important task in this field. Tin-free SPC is a well-established and widely used polymer binder for anti-biofouling coating today. Being a nondegradable vinyl polymer, SPC exhibits poor anti-biofouling performance in static conditions. Even more, such nondegradable polymers were considered to be a source of microplastics by the International Union for the Conservation of Nature in 2019. Recently, numerous degradable polymers, which can form dynamic surface through main chain scission, have been developed for preventing marine biofouling in static conditions. Nevertheless, the regulation of their degradation and mechanical properties is limited, and they are also difficult to functionalize. A new polymer combining the advantages of vinyl polymers and degradable polymers is needed. However, such a combination is a challenge since the former are synthesized via free radical polymerization whereas the latter are synthesized via ring-opening polymerization.In this Account, we review our recent progress toward degradable vinyl polymers for marine anti-biofouling in terms of polymerization methods and structures and properties of polymers. First, we introduce the strategies for preparing degradable vinyl polymers with an emphasis on hybrid copolymerization. Then, we present the synthesis and performance of degradable and hydrolyzable polyacrylates, degradable polyurethanes with hydrolyzable side groups, and surface-fragmenting hyperbranched polymers. Polymers with degradable main chains and hydrolyzable side groups combine the advantages of SPC and degradable polymers, so they are degradable and functional. They are becoming new-generation polymers with great potential for preparing high-efficiency, long-lasting, environmentally friendly and broad-spectrum coatings to inhibit marine biofouling. They can also find applications in wastewater treatment, biomedical materials, and other fields.

Silicone Elastomer with Self-Generating Zwitterions for Antifouling Coatings

Silicone elastomer-based fouling release coatings have been gaining increased attention in marine antibiofouling. However, the lack of fouling resistance limits their application. Introducing a zwitterionic polymer into silicone enhances its fouling resistance, but their incompatibility makes this challenging. In this work, a silicone elastomer with zwitterionic pendant chains has been prepared by grafting a telomer of tertiary carboxybetaine dodecafluoroheptyl ester ethyl acrylate (TCBF) and 3-mercaptopropyltriethoxysilane to the bis-silanol-terminated poly(dimethylsiloxane) (PDMS). The fluorocarbon groups drive the telomer onto the surface in the film formation process, while the TCBF groups hydrolyze and generate zwitterions on the surface, which is confirmed by attenuated total reflection infrared spectra analysis and water contact angle measurements. Bioassays using marine bacteria (Pseudomonas sp.) and diatoms (Navicula incerta) demonstrate that the antifouling efficacy is improved as the telomer content increases. The bacteria and diatom adhesion decreases by 95 and 81%, respectively, for the PDMS with 30 wt % telomer compared with the unmodified PDMS control. Meanwhile, the fouling release performance of PDMS is maintained with a pseudobarnacle removal strength of ∼0.1 MPa. This work provides a facile way to fabricate efficient silicone-based antifouling coatings.

Polymeric Materials for Eye Surface and Intraocular Applications

Ocular applications of polymeric materials have been widely investigated for medical diagnostics, treatment, and vision improvement. The human eye is a vital organ that connects us to the outside world so when the eye is injured, infected, or impaired, it needs immediate medical treatment to maintain clear vision and quality of life. Moreover, several essential parts of the eye lose their functions upon aging, causing diminished vision. Modern polymer science and polymeric materials offer various alternatives, such as corneal and scleral implants, artificial ocular lenses, and vitreous substitutes, to replace the damaged parts of the eye. In addition to the use of polymers for medical treatment, polymeric contact lenses can provide not only vision correction, but they can also be used as wearable electronics. In this Review, we highlight the evolution of polymeric materials for specific ocular applications such as intraocular lenses and current state-of-the-art polymeric systems with unique properties for contact lens, corneal, scleral, and vitreous body applications. We organize this Review paper by following the path of light as it travels through the eye. Starting from the outside of the eye (contact lenses), we move onto the eye's surface (cornea and sclera) and conclude with intraocular applications (intraocular lens and vitreous body) of mostly synthetic polymers and several biopolymers. Initially, we briefly describe the anatomy and physiology of the eye as a reminder of the eye parts and their functions. The rest of the Review provides an overview of recent advancements in next-generation contact lenses and contact lens sensors, corneal and scleral implants, solid and injectable intraocular lenses, and artificial vitreous body. Current limitations for future improvements are also briefly discussed.