Biomass carbon dots derived from Wedelia trilobata for the direct detection of glutathione and their imaging application in living cells

Full-color biomass carbon dots for high-level information encryption and multi-color light emitting diode applications

Six biomass carbon dots (BCDs) with adjustable emission from 450 to 680 nm under a single wavelength excitation were successfully synthesized from spinach via solvent control strategy. The obtained BCDs show blue, green, yellow, violet, pink, and red emission with high photoluminescence quantum yield (PLQY = 12.68 ~ 30.77%). Detailed characterizations disclose that the tunable-emission mechanism is caused by the synergistic effect of carbon conjugate and surface oxidation degree. Meanwhile, full-color photoluminescence BCDs/PVP powder and BCDs/PVP/PVA films were fabricated by utilizing the prepared BCDs combined with polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA), respectively, which presented excellent high-level information encryption application. Importantly, multi-color and white light-emitting diode (LED) with Commission Internationale de L' Eclairage (CIE) of blue (0.25, 0.29); green (0.25, 0.31); yellow (0.42, 0.45); red (0.52, 0.31); and white (0.32, 0.31) were achieved by only using our prepared BCDs. This work provides a valuable strategy of preparing multi-color BCDs using readily available biomass materials and paves a way for high-level information encryption and LED applications.

One-step solvothermal synthesis of full-color fluorescent carbon dots for information encryption and anti-counterfeiting applications

Multicolor fluorescent carbon dots (CDs) have received extensive attention due to their excellent fluorescence tunable performance. In this study, multicolor CDs with color tunable and high fluorescence quantum yields (QYs) were successfully prepared under the same conditions by a one-step solvothermal method using 2-aminoterephthalic acid (ATA) and Nile Blue A (NBA) as reaction reagents, achieving a wide color field coverage. Detailed studies on the relevant mechanisms have been carried out for blue, green and red CDs, indicating that the regulating mechanism of multicolor luminescence is determined by the size of the sp2 conjugated domains, which is due to the increase of particle size that causes an increase in the size of the sp2 conjugated domains, resulting in the narrowing of the band gap and the red-shift of the emission wavelength. It was found that the CDs have the advantages of simple preparation, high photostability and high quantum yield. They were used as fluorescent ink and mixed with polyvinyl alcohol (PVA) to form CD/PVA composites, which were successfully applied in the field of information encryption and anti-counterfeiting. This work provides a new strategy for the synthesis of panchromatic tunable fluorescent CDs and their application in the field of information encryption and anti-counterfeiting.

Ag-carbon dots with peroxidase-like activity for colorimetric and SERS dual mode detection of glucose and glutathione

Currently, nanozymes have made important research progress in the fields of catalysis, biosensing and tumor therapy, but most of nanozymes sensing systems are single-mode detection, which are easily affected by environment and operation, so it is crucial to construct nanozymes sensing system with dual-signal detection to obtain a more stable and reliable performance. In this paper, Ag-carbon dots (Ag-CDs) bifunctional nanomaterials were synthesized using carbon dots as reducing agent and protective agent by a facile and green one-step method. A simple and sensitive colorimetric-SERS dual-mode sensing platform was constructed for the detection of glucose and glutathione(GSH) in body fluids by taking advantage of good peroxidase-like and SERS activities of Ag-CDs. Ag-CDs catalyzes H2O2 to hydroxyl radicals(•OH), which oxidized TMB to form ox-TMB blue solution with characteristic absorption peak at 652 nm and Raman characteristic peak at 1607 cm-1. Ag-CDs sensing method exhibited high performance for glucose and GSH with detection limits for colorimetric and SERS as low as 11.30 μM and 3.54 μM, 0.38 μM and 0.24 μM respectively (S/N = 3). In addition, Ag-CDs have good stability and uniformity, ensuring long-term applicability of catalytic system. This colorimetric-SERS dual-mode sensing platform can be used for the determination of glucose and GSH in saliva and urine, and has the advantages of simple, low cost, rapid, and high accuracy, which has a potential application prospect in biosensor and medical research.

Biomass carbon and Ti2C3MXene quantum dots as ratiometric fluorescent probes for sensitive detecting malachite green in fish sample

A visual detection method for malachite green (MG) in food was established based on 'double-response-OFF' ratiometric fluorescent paper-based sensor. Biomass carbon quantum dots (BCQDs) using broad bean shell, and Ti3C2MXene quantum (MQDs) dots modified by ethylenediamine were synthesized by solvothermal method. The MG and two kinds of quantum dots could undergo static quenching, and the fluorescence color of two kinds of quantum dots gradually changed from red to blue, eventually the fluorescence was quenched, and the pattern had a two-stage linear relationship using fluorescent spectrofluorometer in the range of 0.1-140.0μM and the detection limit of 0.07μM. On this basis, a BCQDs/MQDs ratiometric fluorescence paper-based sensor was constructed and applied to fish sample. Through mobile phone software-Color recognizer, RGB values of fluorescent paper-based sensor at various concentrations of MG were extracted. The results showed that MG concentration was linearly correlated withR' value of RGB in the range of 20.0-140.0μM with 16.5μM detection limit. The method had been applied to the determination of canned fish and fresh basa fish samples, and the recovery rates were 97.33%-108.93% and 96.04%-117.97%, respectively. It proved that the ratiometric fluorescent paper-based sensor could be used for the rapid visual quantitative detecting MG in real samples.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Interfacial deposition of Ag nanozyme on metal-polyphenol nanosphere for SERS detection of cellular glutathione

The low polarization and low Raman cross section characteristics of glutathione (GSH) make it challenging to directly detect GSH molecules through surface enhanced Raman scattering (SERS) technology. Development of nanostructures for indirect detection of GSH applied to the SERS platform is of great interest. Herein, silver nanoparticles (Ag NPs)/copper-polyphenol colloidal spheres (denoted as CuTA@Ag) with adjustable Ag NPs coverage are prepared by deposition of Ag NPs on the metal-polyphenol colloidal spheres via an interfacial polyphenol reduction method. The size and density of the Ag NPs deposited on the out layer can be readily adjusted by tailoring the concentrations of silver precursor. It leads to activity difference for the nanozyme and SERS characteristics. The SERS properties of the obtained CuTA@Ag are studied using oxTMB, catalytic products of nanozyme, as the probing molecules. They provide satisfactory SERS performance with a low detection limit of 10^-7 M (S/N = 3) and linear determination in the 1-100 μM range for GSH. Moreover, it is further able to detect the glutathione content in cancer cells with well accurate and reproducible capability, catching the signs of rising cancer marker levels. This work proposes structurally tunable nanomaterials platform for a catalytic-based SERS assay, which is expected to utilize the high sensitivity of SERS tool for GSH detection in the cellular environment.

Construction of continuously enhanced fluorescent sensor for detection of glutathione in normal and cancer cells

In this paper, water-soluble cysteamine (CA)-capping CdSe quantum dots (CA-CdSe) could be used as a continuous fluorescent sensor. The CA-CdSe QDs can respond to Ag⁺ with a detection limit of 54.1 nM. Interestingly, CA-CdSe quantum dots combined with Ag⁺ to generate a new nano-fluorescence sensor-Ag⁺ modified CA-CdSe QDs (Ag⁺@CA-CdSe). Ag⁺@CA-CdSe can detect glutathione (GSH) with good sensitivity and anti-interference performance. The detection limit of Ag⁺@CA-CdSe fluorescenct sensor for GSH is as low as 0.74 μM. In addition, the novel nano-fluorescent sensor Ag⁺@CA-CdSe exhibited good cell permeability and was successfully applied to detect exogenous and endogenous GSH concentrations in cells. It could distinguish cancerous and normal cells by in vitro cell fluorescence imaging.

S-Doped carbonized polymer dots inhibit early myocardial fibrosis by regulating mitochondrial function

Myocardial fibrosis (MF) is a critical pathological lesion in the progression of various acute and chronic cardiovascular diseases. However, there is still a lack of clinically effective drugs and treatments for MF therapies. Herein, for the first time, we developed fluorescent sulfur-doped carbonized polymer dots (S-CPDs) as new nano-antioxidants to reduce the cardiomyocyte damage caused by reactive oxygen species (ROS) in the early stage of fibrotic lesions. In vitro results suggested that the pre-protection of S-CPDs significantly increased the survival rate of H9c2 cells under severe oxidative stress, inhibited the isoproterenol (ISO)-induced hypertrophy of myocardial cells through improving the content of mitochondria related proteins and adenosine triphosphate (ATP) in cells. Moreover, S-CPD administration could effectively decrease cardiac hypertrophy and promote heart function in MF rat models. The rapid internalization, high biocompatibility and fluorescence imaging potential of S-CPDs revealed their promising application prospects in the diagnoses and treatments of cardiovascular diseases.

Biomass-Derived Carbon Dots and Their Sensing Applications

Carbon dots (CDs) can be widely used in the field of sensing because of its good water solubility, low toxicity, high fluorescence stability and excellent biocompatibility. It has become a popular trend to prepare high-value, inexpensive, renewable and environmentally friendly CDs sensors from biomass resources. This article reviewed the research progress of biomass-derived CDs as chemical, physical and biological sensors in recent years and studied their preparation processes and sensing abilities. Furthermore, the prospects and challenges of biomass-CDs sensors were discussed. This article is expected to provide inspirations for the design, preparation and application of biomass-CDs sensors in the future.

In-situ formation of MnO2 nanoparticles on Ru@SiO2 nanospheres as a fluorescent probe for sensitive and rapid detection of glutathione

Glutathione (GSH)-switched fluorescent assays have appealed much attention due to rapid signal changes of fluorescent probes. However, exposure to exterior environment of fluorescent probe causes photobleaching and premature leakage, leading to low sensitivity and poor photostability. Herein, luminescent SiO₂ nanoparticles encapsulated with Ru(bpy)₃²⁺ (Ru@SiO₂) were designed and synthesized as fluorescent probe to construct a GSH-switched fluorescent assay. The encapsulation of Ru(bpy)₃²⁺ in the SiO₂ nanoparticles could effectively prevent the leakage of Ru(bpy)₃²⁺ molecules, improving the photostability of probe. The fluorescence of Ru@SiO₂ nanoparticles was quenched by coating MnO₂ nanoparticles on Ru@SiO₂ surface (Ru@SiO₂@MnO₂ nanocomposites) through an in situ growth approach, which reduced background of the assay. The MnO₂ nanoparticles not only further inhibited the leakage of Ru(bpy)₃²⁺ molecules, but also could serve as a recognition unit of GSH. In the presence of GSH, the MnO₂ nanoparticles on the surface of Ru@SiO₂ nanoparticles were reduced to Mn²⁺, resulting the fluorescence recovery of Ru@SiO₂ nanoparticles. Thus, a signal-on fluorescent strategy was constructed for GSH detection. The assay displayed good analytical performance for GSH detection with a low detection limit of 16.2 nM due to excellent fluorescence quenching ability of MnO₂ nanoparticles and special role of Ru@SiO₂ nanoparticles to block probe leakage. The proposed assay was also applied to measure GSH levels in human serum samples. This work paves a new way to detect GSH with high sensitivity.

High-Efficiency Utilization of Waste Tobacco Stems to Synthesize Novel Biomass-Based Carbon Dots for Precise Detection of Tetracycline Antibiotic Residues

Recycling waste biomass into valuable products (e.g., nanomaterials) is of considerable theoretical and practical significance to achieve future sustainable development. Here, we propose a one-pot hydrothermal synthesis route to convert waste tobacco stems into biomass-based N, S-codoped carbon dots (C-dots) with the assistance of carbon black. Unlike most of the previously reported luminescent C-dots, these biomass-based C-dots showed a satisfactory stability, as well as an excitation-independent fluorescence emission at ~520 nm. Furthermore, they demonstrated a pH-dependent fluorescence emission ability, offering a scaffold to design pH-responsive assays. Moreover, these as-synthesized biomass-based C-dots exhibited a fluorescence response ability toward tetracycline antibiotics (TCs, e.g., TC, CTC, and OTC) through the inner filter effect (IFE), thereby allowing for the establishment a smart analytical platform to sensitively and selectively monitor residual TCs in real environmental water samples. In this study, we explored the conversion of waste tobacco stems into sustainable biomass-based C-dots to develop simple, efficient, label-free, reliable, low-cost, and eco-friendly analytical platforms for environmental pollution traceability analysis, which might provide a novel insight to resolve the ecological and environmental issues derived from waste tobacco stems.

Facile and Green Synthesis of Highly Fluorescent Carbon Quantum Dots from Water Hyacinth for the Detection of Ferric Iron and Cellular Imaging

Natural biomass is used for facile synthesis of carbon quantum dots (CQDs) with high fluorescence, owing to its abundance, low cost, and eco-friendliness. In this study, a bottom-up hydrothermal method was used to prepare CQDs from water hyacinth (wh) at a constant temperature of 180 °C for 12 h. The synthesized wh-CQDs had uniform size, amorphous graphite structure, high water solubility (containing multiple hydroxyl and carboxyl groups on the surface), excitation light-dependent characteristics, and high photostability. The results showed that the aqueous solution of CQDs could detect Fe³⁺ rapidly, sensitively, and highly selectively with a detection limit of 0.084 μM in the linear range of 0–330 μM, which is much lower than the detection limit of 0.77 μM specified by the World Health Organization. More importantly, because the wh-CQDs were synthesized without any additives, they exhibited low toxicity to Klebsiella sp. cells even at high concentrations. Moreover, wh-CQDs emitted bright blue fluorescence in Klebsiella sp. cells, indicating its strong penetrating ability. Correspondingly, the fluorescent cell sorting results also revealed that the proportion of cell internalization reached 41.78%. In this study, wh-CQDs derived from natural biomass were used as high-performance fluorescent probes for Fe³⁺ detection and Klebsiella sp. imaging. This study is expected to have great significance for the application of biomass carbon spots in the field of cellular imaging and biology.

An insight into the potentials of carbon dots for in vitro live-cell imaging: recent progress, challenges, and prospects

Carbon dots (CDs) are a strong alternative to conventional fluorescent probes for cell imaging due to their brightness, photostability, tunable fluorescence emission, low toxicity, inexpensive preparation, and chemical diversity. Improving the targeting efficiency by modulation of the surface functional groups and understanding the mechanisms of targeted imaging are the most challenging issues in cell imaging by CDs. Firstly, we briefly discuss important features of fluorescent CDs for live-cell imaging application in this review. Then, the newest modulated CDs for targeted live-cell imaging of whole-cell, cell organelles, pH, ions, small molecules, and proteins are elaborately discussed, and their challenges in these fields are explained.

Natural Carbon Nanodots: Toxicity Assessment and Theranostic Biological Application

This review outlines the methods for preparing carbon dots (CDs) from various natural resources to select the process to produce CDs with the best biological application efficacy. The oxidative activity of CDs mainly involves photo-induced cell damage and the destruction of biofilm matrices through the production of reactive oxygen species (ROS), thereby causing cell auto-apoptosis. Recent research has found that CDs derived from organic carbon sources can treat cancer cells as effectively as conventional drugs without causing damage to normal cells. CDs obtained by heating a natural carbon source inherit properties similar to the carbon source from which they are derived. Importantly, these characteristics can be exploited to perform non-invasive targeted therapy on human cancers, avoiding the harm caused to the human body by conventional treatments. CDs are attractive for large-scale clinical applications. Water, herbs, plants, and probiotics are ideal carbon-containing sources that can be used to synthesize therapeutic and diagnostic CDs that have become the focus of attention due to their excellent light stability, fluorescence, good biocompatibility, and low toxicity. They can be applied as biosensors, bioimaging, diagnosis, and treatment applications. These advantages make CDs attractive for large-scale clinical application, providing new technologies and methods for disease occurrence, diagnosis, and treatment research.