A carbon dot doped lanthanide coordination polymer nanocomposite as the ratiometric fluorescent probe for the sensitive detection of alkaline phosphatase activity

Novel hydrogel pillar array based ratiometric multicolor fluorescence biosensor for visual detection of alkaline phosphatase activity

Enzyme-induced in-situ fluorescence is crucial for the development of biosensing mechanisms and correlative spectroscopic analysis. Inspired by simple p-aminophenol (AP)-controlled synthesis and the specific catalytic reaction of 4-aminophenyl phosphate (APP) triggered by alkaline phosphatase (ALP), our research proposed a strategy to prepare carbon dots (CDs) as fluorescent signals for ALP detection using AP and 3-aminopropyltrimethoxysilane (APTMS) as the precursors. The further constructed ratiometric fluorescence sensor reduced the detection limit of ALP to 0.075 μU/mL by a significant margin. Considering the need for point-of-care testing (POCT), we chose agarose for the preparation of portable hydrogel sensors so that even untrained personnel can quickly achieve semi-quantitative visual detection of ALP using colorimetric cards. These results demonstrate the practical applicability of ratiometric fluorescence sensing hydrogel pillar arrays, which are important for high-sensitivity, visualization, and portable rapid enzyme activity assays.

A ternary nucleotide-lanthanide coordination nanoprobe for ratiometric fluorescence detection of ciprofloxacin

Ciprofloxacin (CIP) is a widely used broad-spectrum antibiotic and has been associated with various side effects, making its accurate detection crucial for patient safety, drug quality compliance, and environmental and food safety. This study presents the development of a ternary nucleotide-lanthanide coordination nanoprobe, GMP-Tb-BDC (GMP: guanosine 5'-monophosphate, BDC: 2-amino-1,4-benzenedicarboxylic acid), for the sensitive and ratiometric detection of CIP. The GMP-Tb-BDC nanoprobe was constructed by incorporating the blue-emissive ligand BDC into the Tb/GMP coordination polymers. Upon the addition of CIP, the fluorescence of terbium ion (Tb3+ ) was significantly enhanced due to the coordination and fluorescence sensitization properties of CIP, while the emission of the BDC ligand remained unchanged. The nanoprobe demonstrated good linearity in the concentration range of 0-10 μM CIP. By leveraging mobile phone software to analyze the color signals, rapid on-site analysis of CIP was achieved. Furthermore, the nanoprobe exhibited accurate analysis of CIP in actual drug and milk samples. This study showcases the potential of the GMP-Tb-BDC nanoprobe for practical applications in CIP detection.

Specializing Carbon Nanozyme Active Sites for Sensitive Alkaline Phosphatase Activity Metal-Free Detection

As biological enzymes regulate metabolic processes, alkaline phosphatase (ALP) is a critical diagnostic indicator associated with many diseases. To accurately measure the enzyme activity, nanozymactic materials can offer sensitive strategies for ALP detection. However, nanozymes often lack specific target binding sites, and the presence of common co-components, e. g., metal ions, may cause false-positive or false-negative results in enzyme activity determination. Herein, we developed a colorimetric assay for ALP detection using metal-free nanozymatic carbon dots (CDs). The ALP hydrolysis of pyrophosphate ions (PPi) to phosphate ions (Pi) induces a "turn-on" response based on the nanozyme activity. This PPi-induced inhibition mechanism is extensively studied via the Michaelis-Menten model, revealing that PPi acts as a noncompetitive inhibitor for CDs at a binding site distinct from the common nanozyme active site. With superior responses to ALP substrates, a highly sensitive and selective method is established for sensing ALP activity with a linear range of 0.010-0.200 U/L and a detection limit of 0.009 U/L. This finding explores the recognition and binding behavior of nanozymes, allowing for precise and reliable measurements even in complex samples, and represents a significant breakthrough for nanozyme-based assays in biological analysis.

Preparation and application of carbon quantum dot fluorescent probes combined with rare earth ions

Globally, antibiotic abuse, organic contamination, and excessive heavy metal ion pollution pose serious threats to human health. In this case, ratiometric fluorescent probes can eliminate the errors caused by environmental factors and provide more accurate detection results than single-emission intensity nanoprobes. Accordingly, based on the excellent biocompatibility and abundant surface functional groups of carbon quantum dots (CQDs) and the properties of large Stokes shifts and narrow emission bands of rare earth ions (RE3+), RE-CQD fluorescent probes have attracted widespread attention. Herein, firstly we review the combination of carbon quantum dots with rare earth ions (rare earth complexes) using various functionalization approaches to improve the defects of rare earth complexes and realize the functionalization of carbon quantum dots and their applications in many fields, such as biology and environmental science. In addition, we classify the methods for the synthesis of RE-CQD hybrids into three groups according to the different binding modes of the RE and CQDs, including doping, covalent grafting, and direct coordination. The excellent properties of these fluorescent probes are also briefly described. Finally, a comprehensive overview of the important applications of RE-CQD fluorescent probes in the fields of public safety sensing, chemical sensing, biomedical sensing, temperature sensing, and pH sensing is presented. In this review, the recent research progress in the field of ratiometric fluorescence sensing based on carbon quantum dots and rare earth ions is summarized and an outlook on the future development of RE-CQD fluorescent probes regarding their construction and potential applications is provided.

Integrated ratiometric luminescence sensing strategy based on encapsulation of guests in heterobinuclear lanthanide coordination polymer nanoparticles for glucose detection in human serum

Lanthanide coordination polymers (LnCPs) can be used as a host platform to encapsulate functional guest molecules for the construction of integrated sensing platforms. In this work, two guest molecules, rhodamine B (RhB) and glucose oxidase (GOx), were successfully encapsulated in a heterobinuclear lanthanide coordination polymer synthesized by self-assembly of Ce³⁺, Tb³⁺ and adenosine monophosphate (AMP) to form RhB&GOx@AMP-Tb/Ce. Both guest molecules show good storage stability and minimal leakage. The higher catalytic activity and stability of RhB&GOx@AMP-Tb/Ce is obtained due to the confinement effect compared to free GOx. RhB&GOx@AMP-Tb/Ce exhibits superior luminescence based on the internal tandem energy transfer process of the nanoparticles (Ce³⁺→Tb³⁺→RhB). Glucose can be oxidized in the presence of GOx to form gluconic acid and H₂O₂. Subsequently, Ce³⁺ in the AMP-Tb/Ce host structure can be oxidized by H₂O₂ to Ce⁴⁺, thereby interrupt the internal energy transfer process and cause ratiometric luminescence response. Benefiting from the synergistic effect, the smart integrated luminescent glucose probe exhibits a wide linear range (0.4-80 μM) and a low detection limit (74.3 nM) with high sensitivity, selectivity and simplicity, enabling the quantitative detection of glucose in human serum. This work describes a good strategy to construct an integrated luminescence sensor based on lanthanide coordination polymers.

Gelatinous lanthanide coordination polymer with aggregation-enhanced antenna effect for ratiometric detection of endogenous alkaline phosphatase

Aggregation-induced emission (AIE) and antenna effect (AE) are two significant behaviors that have attracted increasing attention. However, it is challenging to achieve the synergistic effect of AIE and AE in luminescent materials for more extensive applications. Here, four gelatinous Ln³⁺ coordination polymers (Ln-CPs) are synthesized by self-assembly of ciprofloxacin (CIP), adenosine monophosphate (AMP), and Ln³⁺ ions in aqueous medium. Encouragingly, a remarkable increase in the characteristic fluorescence of Ln³⁺ and a significant decrease in CIP are observed along with increasing concentration of Ln-CPs, which is attributed to the large aggregates formed by self-assembly that strictly constrain the intramolecular motions of antenna ligands, thereby achieving the aggregation-enhanced AE. More meaningfully, Eu-CP not only shows a rice-like morphology at high aggregation state, but also provides an opportunity for the selective detection of alkaline phosphatase (ALP). A new flower-like polymer is formed upon incubating Eu-CP with ALP, accompanied by the fluorescence quenching of Eu³⁺ and recovery of CIP, a ratiometric determination of ALP in the range of 0.1-6.0 U·L^-1 is thus achieved. Additionally, ALP assay in human serum and bioimaging in living cells have been successfully performed. This research opens a new horizon for the fabrication of Ln³⁺-based luminescent materials with promising applications.

A ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles for selective and sensitive detection of Fe3+ and Cu2+ ions

Detection of Fe(III) and Cu(II) in water is highly desirable because their abnormal levels can cause serious harm to human health and environmental safety. In this work, a ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles was constructed for the detection of Fe³⁺ and Cu²⁺ ions. The terbium-silica nanoparticles (named SiO₂@Tb) with dual-emission signals were successfully prepared by grafting Tb³⁺ ions onto trimellitic anhydride (TMA) functionalized silica nanospheres. It can serve as a ratiometric fluorescent probe for the detection of Fe³⁺ and Cu²⁺ ions in water with the green emission of Tb³⁺ ions as a response signal and the blue emission of silica nanospheres as the reference signal. Significantly, an easy-to-differentiate color change for visual detection was also realized. SiO₂@Tb shows high sensitivity even in very low concentration regions towards the sensing of Fe³⁺ and Cu²⁺ with low detection limits of 0.75 μM and 0.91 μM, respectively. Moreover, the mechanism for the luminescence quenching of SiO₂@Tb was systematically investigated, and was attributed to the synergetic effect of the absorption competition quenching (ACQ) mechanism and cation exchange. This study demonstrates that SiO₂@Tb can be employed as a promising fluorescent probe for the detection of Fe³⁺ and Cu²⁺ ions, and the combination of lanthanide ions with silica nanoparticles is an effective strategy to construct a ratiometric fluorescent sensing platform for the determination of analytes in environmental detection.

In situ reaction-based ratiometric fluorescent assay for alkaline phosphatase activity and bioimaging

Alkaline phosphatase (ALP) is an important biomarker, it is of great significance to develop a sensitive and efficient analytical method for ALP. In this study, an in situ reaction based ratiometric fluorescence assay for ALP was proposed. l-ascorbic acid-2-phosphate (AA2P) was used as a substrate for ALP, and Cu²⁺/o-phenylenediamine (OPD) were involved in this system. Cu²⁺ can oxidize OPD to 2,3-diaminophenazine (OPDox) with an emission centered at 566 nm. The presence of ALP can catalyze the hydrolysis of AA2P to ascorbic acid (AA), which will inhibit the production of OPDox and reduce the corresponding fluorescence intensity, and AA will react with OPD to generate 3-(dihydroxyethyl)furan[3,4-b]quinoxalin-1-one (DFQ) with an emission peak at 447 nm. The fluorescence ratio of F447/F566 has a linear relationship with ALP activity. The proposed method is highly sensitive, finely selective, cost efficiency and easy to operate, it exhibits good linearity in the range of 0.5-22 and 22-40 mU·mL^-1, with a detection limit as low as 0.06 mU·mL^-1. The excellent applicability of this strategy in human serum samples and MCF-7 cells imaging suggests that this method has promising prospects for biomedical research.

Selective Detection of Alkaline Phosphatase Activity in Environmental Water Samples by Copper Nanoclusters Doped Lanthanide Coordination Polymer Nanocomposites as the Ratiometric Fluorescent Probe

In this paper, a novel, accurate, sensitive and rapid ratiometric fluorescent sensor was fabricated using a copper nanoclusters@infinite coordination polymer (ICP), specifically, terbium ion-guanosine 5'-disodium (Cu NCs@Tb-GMP) nanocomposites as the ratiometric fluorescent probe, to detect alkaline phosphatase (ALP) in water. The fluorescence probe was characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The experimental results showed that, compared with Tb-GMP fluorescent sensors, Cu ratiometric fluorescent sensors based on NCs encapsulated in Tb-GMP had fewer experimental errors and fewer false-positive signals and were more conducive to the sensitive and accurate detection of ALP. In addition, the developed fluorescent probe had good fluorescence intensity, selectivity, repeatability and stability. Under optimized conditions, the ratiometric fluorescent sensor detected ALP in the range of 0.002-2 U mL^-1 (R² = 0.9950) with a limit of detection of 0.002 U mL^-1, and the recovery of ALP from water samples was less than 108.2%. These satisfying results proved that the ratiometric fluorescent probe has good application prospects and provides a new method for the detection of ALP in real water samples.

Paper mill sludge-based carbon quantum dots as a specifically ratiometric fluorescent probe for the sensitive and selective detection of coptisine

Coptisine (COP), one of the bioactive components in Rhizoma Coptidis, has many pharmacological effects. Meanwhile, the determination of COP is essential in pharmacological and clinical applications. Herein, we prepared carbon quantum dots (CQDs) by one-step oil-thermal method using paper mill sludge (PMS) as precursor, and developed a ratiometric fluorescence method for the determination of COP. The structural and optical properties of PMS-CQDs were evaluated through HRTEM, FT-IR, XPS, XRD, UV-vis, fluorescence, zeta potential and fluorescence lifetime experiments. Fluorescence intensity ratio at 550 nm and 425 nm (I₅₅₀ /I₄₂₅ ) was recorded as an index for quantitative detection of COP. The detection concentration of COP ranges from 0.1 to 50 μM in good linear correlation (R² = 0.9974) with a limit of detection of 0.028 μM (3σ/k). The quenching mechanism was deduced to be inner filter effect and static quenching. The ratiometric fluorescent probe showed impressive selectivity and sensitivity towards COP, and was successfully applied to the detection of COP in human urine with expected recoveries (95.22-111.00%) and relative standard deviation (0.46-2.95%), indicating that our developed method has a great application prospect in actual sample detection.

A colorimetric and ratiometric photometric sequential assay for ascorbic acid and alkaline phosphatase in serum based on valence states modulation

The photometric method is widely used in real clinical tests due to its simple operation, low cost and convenient. Many of the reported colorimetric ALP assays so far are non- ratiometric because the detection was based on changes in absorbance at a single wavelength. The development of novel colorimetric and ratiometric assay is of importance for quantitatively measuring target with high accuracy. The challenge in the design of ratiometric photometric assay is that the chromophore must have a significant spectral shift before and after binding to the target. Here, we report a colorimetric and ratiometric photometric sequential assay of AA and ALP based on the complexation between ARS and Cu²⁺ and redox reaction between AA and Cu²⁺. The absorption band of ARS centered at 425 nm (yellow color), which could be shifted to 510 nm (red color) upon Cu²⁺ binding. However, as far as we know, this classic color reaction has not been used to develop a ratiometric photometric method to sequentially detect AA and ALP, although photometric methods based on the regulation of other color reagents with oxidizing metal ions have been reported. The proposed sensing system shows a limit of detection for ALP at 0.24 U L^-1 and could be applied for detecting ALP in newborn calf serum. The established sensing system makes a useful contribution to the detection of ALP in complex clinical samples.

Long-wavelength emission carbon dots as self-ratiometric fluorescent nanoprobe for sensitive determination of Zn2

A novel ratiometric fluorescence nanoprobe based on long-wavelength emission carbon dots (CDs) was designed for high sensitive and selective detection of Zn²⁺. The CDs were conveniently prepared by a one-step solvothermal treatment of formamide and glutathione (GSH). Under single excitation wavelength (420 nm), the obtained CDs exhibit three emission peaks at 470, 650, and 685 nm, respectively. For the long-wavelength emission region of the CDs, the fluorescence at 685 nm can be quenched with different levels upon the addition of most metal ions. However, the presence of Zn²⁺ not only results in the fluorescence quenching at 685 nm effectively but also enhances at 650 nm remarkably, which may be due to the formation of CD-Zn²⁺ chelate complex inducing the dispersion of CDs aggregates and changes in the group distribution on the surface of CDs. Taking the advantage of the unique fluorescence response induced by Zn²⁺, the prepared CDs were successfully employed as nanoprobe for self-ratiometric fluorescence determination of Zn²⁺ with F₆₅₀/F₆₈₅ as signal output. A good linear relationship in the concentration range 0.01 to 2 μM, and a detection limit as low as 5.1 nM has been obtained. The ratiometric nanoprobe was successfully applied to  Zn²⁺ determination  in human serum samples.

Monitoring the Viral Transmission of SARS-CoV-2 in Still Waterbodies Using a Lanthanide-Doped Carbon Nanoparticle-Based Sensor Array

The latest epidemic of extremely infectious coronavirus disease 2019 (COVID-19) has created a significant public health concern. Despite substantial efforts to contain severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) within a specific location, shortcomings in the surveillance of predominantly asymptomatic infections constrain attempts to identify the epidemiological spread of the virus. Continuous surveillance of wastewater streams, including sewage, offers opportunities to track the spread of SARS-CoV-2, which is believed to be found in fecal waste. To demonstrate the feasibility of SARS-CoV-2 detection in wastewater systems, we herein present a novel facilely constructed fluorescence sensing array based on a panel of three different lanthanide-doped carbon nanoparticles (LnCNPs). The differential fluorescence response pattern due to the counterion-ligand interactions allowed us to employ powerful pattern recognition to effectively detect SARS-CoV-2 and differentiate it from other viruses or bacteria. The sensor results were benchmarked to the gold standard RT-qPCR, and the sensor showed excellent sensitivity (1.5 copies/μL) and a short sample-to-results time of 15 min. This differential response of the sensor array was also explained from the differential mode of binding of the LnCNPs with the surface proteins of the studied bacteria and viruses. Therefore, the developed sensor array provides a cost-effective, community diagnostic tool that could be potentially used as a novel epidemiologic surveillance approach to mitigate the spread of COVID-19.

Carbon dots-decorated hydroxyapatite nanowires–lanthanide metal–organic framework composites as fluorescent sensors for the detection of dopamine

A ratiometric composite fluorescent probe (HAPNWs-CDs-Tb/MOF) with hydroxyapatite carrier and the fluorescence ratio of carbon dots and lanthanide metal organic framework as the response signal was prepared for the detection of dopamine.

Green synthesis of orange emissive carbon dots for the detection of Ag+and their application via solid-phase sensing and security ink

Fluorescent carbon dots (CDs) have attracted considerable interest due to their superior optical properties and facile preparation. In this work, O-phenylenediamine and melamine were used as precursors for the one-step hydrothermal synthesis of novel orange emissive CDs (O-CDs) in an aqueous solution. The fluorescence intensity (580 nm) of the O-CDs exhibited a good linear relationship with Ag⁺in the range of 0.0-50.0μM with the detection limit of 0.289μM. Moreover, the O-CDs were successfully used to determine Ag⁺in biological samples (Hela cells) because of their low cytotoxicity, and good biocompatibility. Besides, the O-CDs-doped solid-phase detection materials (test paper and hydrogel) were employed to monitor Ag⁺qualitatively and quantitatively, indicated that the O-CDs had a great capacity for the detection of Ag⁺in biological and environmental areas. Based on their extraordinary fluorescence property, the O-CDs could also be used as security ink. Overall, based on their excellent fluorescent performance, the CDs in this study have significant potential for practical application toward solid-phase sensing and security ink.

Insights on Luminescent Micro- and Nanospheres of Infinite Coordination Polymers

Coordination polymers have been extensively studied in recent years. Some of these materials can exhibit several properties such as permanent porosity, high surface area, thermostability and light emission, as well as open sites for chemical functionalization. Concerning the fact that this kind of compounds are usually solids, the size and morphology of the particles are important parameters when an application is desired. Inside this context, there is a subclass of coordination polymers, named infinite coordination polymers (ICPs), which auto-organize as micro- or nanoparticles with low crystallinity. Specifically, the particles exhibiting spherical shapes and reduced sizes can be better dispersed, enter cells much easier than bulk crystals and be converted to inorganic materials by topotactic transformation. Luminescent ICPs, in particular, can find applications in several areas, such as sensing probes, light-emitting devices and bioimaging. In this review, we present the state-of-the-art of ICP-based spherical particles, including the growth mechanisms, some applications for luminescent ICPs and the challenges to overcome in future commercial usage of these materials.