Aerosol-assisted nanostructuring of nickel/cobalt oxide thin films for viable electrochemical hydrazine sensing

Portable smartphone-enabled dydrogesterone sensors based on biomimetic polymers for personalized gynecological care

Dydrogesterone, a frequently prescribed synthetic hormone integral to the treatment of diverse gynecological conditions, necessitates precise quantification in complex human plasma. In this study, the development of a portable, smartphone-based electrochemical sensor employing screen-printed gold electrodes (SPAuEs) modified with a biomimetic, molecularly imprinted poly(methacrylic acid-co-methyl methacrylate) (MIP) is presented for dydrogesterone detection in human plasma. FTIR spectroscopy illustrates the transformation of a pre-polymer mixture into a polymerized matrix, while SEM reveals a uniform MIP/SPAuE surface morphology. The sensor fabrication protocol, encompassing MIP/SPAuE composition, polymerization solvent, incubation time, and scan rate, is optimized to achieve enhanced sensitivity. The MIP/SPAuEs sensor exhibits a linear sensor response to dydrogesterone within the concentration range of 1-500 nM, as evidenced by cyclic and differential pulse voltammetry. The MIP/SPAuE sensor demonstrates exceptional sensitivity, recording 8.2 × 10-3 μA nM-1, with a sub-nanomolar limit of detection (LOD = 370 pM), and low limit of quantification (LOQ = 1.12 nM), along with appreciable selectivity over common interferents. In real-world clinical applications, the designed sensor is effectively employed for the rapid and precise determination of dydrogesterone in human blood plasma, achieving a remarkable recovery of 81%. Furthermore, MIP/SPAuE coatings possess suitable stability over 15 days, indicating the robustness of the sensor material for multiple rounds of analysis. The developed sensor provides a sensitive, selective, and cost-effective solution for monitoring dydrogesterone in plasma during various gynecological disorders, allowing for personalized healthcare applications.

Discerning biomimetic nanozyme electrodes based on g-C3N4 nanosheets and molecularly imprinted polythiophene nanofibers for detecting creatinine in microliter droplets of human saliva

The growing risk of death associated with kidney dysfunction underlines the requirement for a cost-effective and precise point-of-care (POC) diagnostic tool to identify chronic kidney disease (CKD) at an early stage. This work reports the development of a non-invasive POC diagnostic based on cost-efficient, disposable electrodes and in situ-designed biomimetic nanozymes. The nanozymes are composed of graphitic carbon nitride nanosheets (gCN) and creatinine-imprinted polythiophene nanofibers (miPTh). Microscopic analyses reveal porous nanofibrous surface morphology of biomimetic miPTh/gCN nanozymes. Bulk imprinting and the inclusion of conductive gCN nanosheets drastically reduced the charge transfer resistance and improved the electron exchange kinetics at the nanozyme-electrolyte interface. The electrochemical oxidation of creatinine is studied via cyclic voltammetry (CV), and differential pulse voltammetry (DPV), which exhibit excellent creatinine recognition ability of biomimetic miPTh/gCN nanozyme sensors compared to pristine polymeric or non-imprinted nanozymes. The sensor reveals linear response toward 200-1000 nmol L-1 creatinine, high sensitivity (4.27 μA cm-2 nmol-1 L), sub-nanomolar detection limit (340 pmol L-1), and excellent selectivity over common salivary analytes. To corroborate its real-world utility, the miPTh/gCN nanozyme sensor shows an impressive 94.8% recovery of spiked creatinine concentrations in microliter droplets of human saliva samples. This disposable sensor reveals great potential in the realm of reliable and efficient non-invasive POC diagnostics for healthcare delivery.

Enhanced electrocatalytic activity of fluorine doped tin oxide (FTO) by trimetallic spinel ZnMnFeO4/CoMnFeO4 nanoparticles as a hydrazine electrochemical sensor

In the present study, ZnMnFeO₄ and CoMnFeO₄ tri-metallic spinel oxide nanoparticles (NPs) were provided using hydrothermal methods. The nanoparticles have been characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and electrochemical techniques. A reliable and reproducible electrochemical sensor based on ZnMnFeO₄/CoMnFeO₄/FTO was fabricated for rapid detection and highly sensitive determination of hydrazine by the DPV technique. It is observed that the modified electrode causes a sharp growth in the oxidation peak current and a decrease in the potential for oxidation, contrary to the bare electrode. The cyclic voltammetry technique showed that there is high electrocatalytic activity and excellent sensitivity in the suggested sensor for hydrazine oxidation. Under optimal experimental conditions, the DPV method was used for constructing the calibration curve, and a linear range of 1.23 × 10^-6 M to 1.8 × 10^-4 M with a limit of detection of 0.82 ± 0.09 μM was obtained. The obtained results indicate that ZnMnFeO₄/CoMnFeO₄/FTO nano sensors exhibit pleasant stability, reproducibility, and repeatability in hydrazine measurements. In addition, the suggested sensor was efficiently employed to ascertain the hydrazine in diverse samples of cigarette tobacco.

Advanced Photoelectrochemical Hydrogen Generation by CdO-g-C3N4 in Aqueous Medium under Visible Light

Herein, hydrothermal fabrication of CdO-g-C3N4 photocatalyst for a substantially better photocatalytic recital in water splitting is presented. The XRD analysis confirms the cubic phase of CdO-g-C3N4, whereas FTIR and UV-VIS studies revealed the presence of respective groups and a median band gap energy (2.55 eV) of the photocatalyst, respectively, which further enhanced its photo-electrochemical (PEC) properties. The SEM displays the oblong structures of g-C3N4 sheets and nano rod-like morphology of CdO and CdO-g-C3N4, respectively. The HR-TEM exhibits morphology & orientation of the grains and substantiates the polycrystal-line nature of CdO-g-C3N4 nanocomposite. The photocatalytic water-splitting concert is evaluated by PEC experiments under 1 SUN visible light irradiation. Linear sweep voltammetry (LSV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) comprehend the CdO-g-C3N4 as a hydrogen evolution photocatalyst. A photocurrent density beyond ≥5 mA/cm2 is recorded from CdO-g-C3N4, which is 5-6 folds greater than pure CdO and g-C3N4. The efficient separation and transfer of charges allocated to CdO-g-C3N4 and fabricating heterojunctions between g-C3N4 and CdO suppresses the unfavorable electron-hole pairs recombination process. Thus, it recesses charge transfer resistance, augmenting enhanced photocatalytic performance under 1 SUN irradiation.

Tailoring g-C3N4 with Lanthanum and Cobalt Oxides for Enhanced Photoelectrochemical and Photocatalytic Activity

Herein, the synthesis, characterization, and photoelectrochemical and photocatalytic characteristics of hydrothermally prepared La2O3–g-C3N4, CoO–g-C3N4, and La2O3–CoO–g-C3N4 are discussed. The XRD analysis and crystalline phases unveiled the impregnation of La2O3 and CoO into g-C3N4. The microscopic analysis supports the formation of g-C3N4 nanoflakes and La2O3 and CoO nanoparticles embedded homogeneously in the La2O3–CoO–g-C3N4 nanocomposite, whereas the EDX comprehended their respective elemental composition and ratios. A bandgap energy of 2.38 eV for La2O3–CoO–g-C3N4 was calculated using the Tauc plot method, complementing high visible-light activity. The solar-driven water-splitting reaction exhibited significant photocurrent efficiency (~3.75 mA/cm2), augmenting the hydrogen generation by La2O3–CoO–g-C3N4 compared to that by pure g-C3N4, La2O3–g-C3N4, and CoO–g-C3N4 in 0.5 M Na2SO4 electrolyte. The synergistic effect of La2O3 and CoO impregnation with g-C3N4 led to effective division of the photogenerated charge transporters, enhancing the photocatalytic hydrogen generation by the photocatalysts. Furthermore, photocatalytic pollutant removal, namely greater than 90% decomposition of methylene blue (MB) from water, was investigated with a pseudo-first-order reaction kinetics under 1 sun visible-light irradiation. Thus, La2O3–CoO–g-C3N4 nanocomposite was found to be a prospective material for harnessing solar energy.

Recent Advances in Processing and Applications of Heterobimetallic Oxide Thin Films by Aerosol-assisted Chemical Vapor Deposition

The fabrication of smart, efficient, and innovative devices critically needs highly refined thin-film nanomaterials; therefore, facile, scalable, and economical methods of thin films production are highly sought-after for the sustainable growth of the hi-tech industry. The chemical vapor deposition (CVD) technique is widely implemented at the industrial level due to its versatile features. However, common issues with a precursor, such as reduced volatility and thermal stability, restrict the use of CVD to produce novel and unique materials. A modified CVD approach, named aerosol-assisted CVD (AACVD), has been the center of attention due to its remarkable tendency to fabricate uniform, homogenous, and distinct nano-architecture thin films in an uncomplicated and straightforward manner. Above all, AACVD can utilize any custom-made or commercially available precursors, which can be transformed into a transparent solution in a common organic solvent; thus, a vast array of compounds can be used for the formation of nanomaterial thin films. This review article highlights the importance of AACVD in fabricating heterobimetallic oxide thin films and their potential in making energy production (e. g., photoelectrochemical water splitting), energy storage (e. g., supercapacitors), and environmental protection (e. g., electrochemical sensors) devices. A heterobimetallic oxide system involves two metallic species either in a composite, solid solution, or metal-doped metal oxides. Moreover, the AACVD tunable parameters, such as temperature, deposition time, and precursor, which drastically affect thin films microstructure and their performance in device applications, are also discussed. Lastly, the key challenges and issues of scaling up AACVD to the industrial level and processing for emerging functional materials are also highlighted.