Iron and nitrogen-co-doped carbon quantum dots for the sensitive and selective detection of hematin and ferric ions and cell imaging

Biomass Carbon Dots as Fluorescent Probes for Fast and Highly Selective Detection of Fe3 + in Water Media

In this study, a novel fluorescent probe for the rapid and highly selective detection of Fe3 + based on biomass carbon dots (b-CDs) was developed. The b-CDs were obtained via one-step hydrothermal synthesis by utilizing laurel fallen leaves. And the as-synthesized b-CDs were applied for sensing Fe3+ based on fluorescence (FL) quenching effect both in water and phosphate buffer solution (PBS) with a wide linear range from 1 µM to 300 µM, the detection limits (LODs) respectively to be 0.34 µM in water and 0.48 µM in PBS solution. The FL intensity of b-CDs was quenched fleetly within 1 min after adding Fe3+. The sensing mechanism of the b-CDs + Fe3+ system can be attributed to the internal filtration effect (IFE) mechanism and the electron transfer (ET) between b-CDs and Fe3+ in water, and only the IFE mechanism in PBS solution based on multiple experimental evidences. Moreover, the as-proposed probe was successfully adopted for monitoring Fe3+ in lake water and tap water samples. This research shows some merits of economic, simplicity, green, high selectivity, and quick response for Fe3+ determination, and provides an approach for the water quality monitoring of Fe3+ and the effective utilization of waste biological materials.

A Dual-mode Ratiometric Fluorometric and Colorimetric Platform Based on Nitrogen-doped Carbon Dots and o-phenylenediamine for the Detection of Nitrite

In this study, a dual-mode ratiometric fluorometric and colorimetric platform for the determination of nitrite in pickles was proposed by exquisitely employing the fact that non-fluorescent o-Phenylenediamine (OPD) was oxidized by nitrite under acidic conditions to form fluorescent 2,3-diaminophenazine (DAP) (Em = 575), which meanwhile quench the fluorescent nitrogen-doped carbon dots (N-CDs) at 455 nm, the ratio of fluorescence intensity of DAP to N-CDs (F575/F455) changed with the increase of nitrite accompanied by visible color changes. Thus, nitrite can be quantitatively detected within a wide linear range (10-500 µM) with a low detection limit of 0.45 µM due to the high quantum yield of 39.7% of N-CDs. In addition, the colour of the N-CDs/OPD system changed from transparent to yellow when the nitrite was introduced, enabling colorimetric and on-site visual detection. The detection limit of the colorimetric method was 3.03 µM with a linear range of 10-500 µM. The proposed ratiometric fluorometric method has pleasant selectivity and good immunity to interference.

K, Koner AL. Review on Lysosomal Metal Ion Detection Using Fluorescent Probes

Metal ions are indispensable and play an important role in living systems. Metal ions coordinated to metalloenzymes pocket activate the bound substrate and labile metal ions maintaining the ionic balance. The amount of metal ions present in various subcellular compartments of the cells is highly regulated for maintaining cellular homeostasis. An imbalance in the metal ion concentration is related to several diseases and results in serious pathological conditions. Mostly the internalized metal ions are processed in the lysosomal compartment of the cell. A delicate regulation of metal ions in the lysosomal compartment can modulate the lysosomal pH and inhibit hydrolytic enzymes, which ultimately causes lysosomal storage disorders. In the past decade, the understanding and regulation of lysosomal metal ions based on fluorometric methods have gained significant attention. In this review, we have comprehensively summarized the development of various fluorescent reporters over the past five years for a selective and sensitive estimation of lysosomal metal ion concentration. We believe this consolidated and timely review will help researchers working in the areas associated with lysosomal metal ions.

Redox-active phytic acid-based self-assembled hybrid material for enhanced uranium adsorption from highly acidic solution

Achieving efficient uranium adsorption from highly acidic wastewater is still considered challenging. Here, an inorganic-organic hybridized self-assembly material (rPFE-10) with redox activity was constructed by phytic acid (PA), ethylenediamine (EDA), and Fe(II) via a facile one-pot route, and further applied for U(VI) removal. In the static adsorption experiment, rPFE-10 achieved the maximum U(VI) adsorption capacity of 717.1 mg/g at the optimal pH of 3.5. It also performed preeminently in a highly acidic condition of pH = 1.0, with the highest adsorption capacity of 551.2 mg/g and an equilibrium time of 30 min. Moreover, rPFE-10 exhibited a pH-responsive adsorption selectivity for U(VI) and An-Ln (S(U(VI)) and S(An-Ln)), which increased to 69 % and 94 % respectively as pH decreased from 3.0 to 1.0. Additionally, the spectral analysis revealed a reconstruction mechanism induced by multiple synergistic adsorption, in which U(VI) exchange with EDA+/2+ and Fe2+/3+ and earned suitable coordination geometry and ligand environment to coordinate with PA (mainly P-OH), while partial U(VI) is reduced by Fe(II) in framework. This work not only highlights the facile strategy for enhanced U(VI) retention in highly acidic solution, but expands the potential application of supramolecular self-assembly material in treatment of nuclear wastewater.

Recent Advancements in Metal and Non-Metal Mixed-Doped Carbon Quantum Dots: Synthesis and Emerging Potential Applications

In nanotechnology, the synthesis of carbon quantum dots (CQDs) by mixed doping with metals and non-metals has emerged as an appealing path of investigation. This review offers comprehensive insights into the synthesis, properties, and emerging applications of mixed-doped CQDs, underlining their potential for revolutionary advancements in chemical sensing, biosensing, bioimaging, and, thereby, contributing to advancements in diagnostics, therapeutics, and the under standing of complex biological processes. This synergistic combination enhances their sensitivity and selectivity towards specific chemical analytes. The resulting CQDs exhibit remarkable fluorescence properties that can be involved in precise chemical sensing applications. These metal-modified CQDs show their ability in the selective and sensitive detection from Hg to Fe and Mn ions. By influencing their exceptional fluorescence properties, they enable precise detection and monitoring of biomolecules, such as uric acid, cholesterol, and many antibiotics. Moreover, when it comes to bioimaging, these doped CQDs show unique behavior towards detecting cell lines. Their ability to emit light across a wide spectrum enables high-resolution imaging with minimal background noise. We uncover their potential in visualizing different cancer cell lines, offering valuable insights into cancer research and diagnostics. In conclusion, the synthesis of mixed-doped CQDs opens the way for revolutionary advancements in chemical sensing, biosensing, and bioimaging. As we investigate deeper into this field, we unlock new possibilities for diagnostics, therapeutics, and understanding complex biological processes.

Carbon dots using a household cleaning liquid as a dopant for iron detection in hydroponic systems

Iron (Fe) is a required micronutrient in plants for the production of chlorophyll and transport of oxygen. A commonly used surrogate for measuring nutrient levels is the measurement of electrical conductivity or total dissolved solids, but this technique is not selective towards any particular dissolved ion. In this study, using a conventional microwave, fluorescent carbon dots (CDs) are produced from glucose and a household cleaning product and applied towards monitoring dissolved ferric iron levels in hydroponic systems through fluorescent quenching. The produced particles have an average size of 3.19 ± 0.76 nm with a relatively high degree of oxygen surface groups. When using an excitation of 405 nm, a broad emission peak is centered at approximately 500 nm. A limit-of-detection of 0.196 ± 0.067 ppm (3.51 ± 1.21 μM) with minimal interference from common heavy metal quenchers and ions found in hydroponic systems was determined. Butterhead lettuce was grown while discretely monitoring iron levels via the CDs for three separate weeks of growth. The CDs displayed a non-significant difference (p > 0.05) in performance when compared to a standard method. These results along with a simple and relatively low-cost production method make the CDs in this study a promising tool for monitoring iron levels in hydroponic systems.

Nitrogen-doped carbon dots: Recent developments in its fluorescent sensor applications

Doped carbon dots have attracted great attention from researchers across disciplines because of their unique characteristics, such as their low toxicity, physiochemical stability, photostability, and outstanding biocompatibility. Nitrogen is one of the most commonly used elements for doping because of its sizeable atomic radius, strong electronegativity, abundance, and availability of electrons. This distinguishes them from other atoms and allows them to perform distinctive roles in various applications. Here, we have reviewed the most current breakthroughs in nitrogen-doped CDs (N-CDs) for fluorescent sensor applications in the last five years. The first section of the article addresses several synthetic and sustainable ways of making N-CDs. Next, we briefly reviewed the fluorescent features of N-CDs and their sensing mechanism. Furthermore, we have thoroughly reviewed their fluorescent sensor applications as sensors for cations, anions, small molecules, enzymes, antibiotics, pathogens, explosives, and pesticides. Finally, we have discussed the N-CDs' potential future as primary research and how that may be used. We hope that this study will contribute to a better understanding of the principles of N-CDs and the sensory applications that they can serve.

The synthesis of N-doped carbon dots for visual differentiating and detection of tetracyclines

N-doped carbon dots (N-CDs) were synthesized from L-glutamine and triethanolamine using a one-step hydrothermal method. The N-CDs emitting blue fluorescence had selective responses to tetracyclines (TCs) and could be used as a fluorescent probe to realize the quantitative detection and qualitative analysis of TCs. A method for the determination of TCs using the N-CDs in actual samples was successfully established. The recovery rate was maintained at 97.50-105.60%, and the relative standard deviation (RSD) was less than 3%. In addition, TCs can be visually distinguished using filter paper by the different fluorescence colours (light green, dark blue, and yellow-green) of the N-CDs/TCs system under ultraviolet light. This study provides a relatively simple method to detect and identify TCs.

Removal of Sulfide Ions from Kraft Washing Effluents by Photocatalysis with N and Fe Codoped Carbon Dots

N and Fe codoped carbon dots (N,Fe-CDs) were fabricated from citric acid, L-glutamic acid and ferric chloride via a hydrothermal method for the photocatalytic removal of S2- from kraft washing effluents (KWE). The N,Fe-CDs were fluorescent nanoparticles (average size of 3.18 nm) and catalyzed the oxidation of S2- following a first-order kinetic model with an activation energy of 33.77 kJ/mol. The N,Fe-CDs tolerated elevated temperatures as high as 80 °C without catalyst deactivation. The N,Fe-CDs catalysts were reusable for at least four cycles, preserving over 90% of the activity. In the treatment of KWE from the kraft pulping of eucalyptus, the concentration of S2- was decreased by the N,Fe-CDs from 1.19 to 0.41 mmol/L in 6 h. Consequently, near complete remediation was obtained in 24 h. In addition, half of the chemical oxygen demand was removed after treatment with 500 mg/L of the N,Fe-CDs. In addition, the present photocatalyst was safe within a concentration of 200 mg/L, as indicated by the acetylcholinesterase inhibition test. Our findings may help develop a cleaner production process for kraft brownstock washing.

A Review on the Catalytic Remediation of Dyes by Tailored Carbon Dots

Water polluted with dyes has become a serious global concern during the twenty-first century, especially for developing countries. Such types of environmental contaminant pose a severe threat to biodiversity, ecosystems, and human health globally; therefore, its treatment is an utmost requirement. Advanced technologies including the use of nanomaterials represent a promising water treatment technology with high efficiencies, low production costs, and green synthesis. Among the nanomaterials, carbon dots, as a new class of carbon-based nanoparticles, have attracted attention due to their unique features and advantages over other nanomaterials, which include high water solubility, easy fabrication and surface functionalisation, excellent electron-donating ability, and low toxicity. Such properties make carbon dots potential nanocatalysts for the Fenton-like degradation of environmental pollutants in water. Although recent studies show that carbon dots can successfully catalyse the degradation of dyes, there are still limited and controversial studies on the ecotoxicity and fate of these nanoparticles in the environment. In this review, the authors aim to summarise the recent research advances in water remediation by technologies using carbon dots, discuss important properties and factors for optimised catalytic remediation, and provide critical analysis of ecotoxicity issues and the environmental fate of these nanoparticles.

Paper mill sludge-based carbon quantum dots as a specifically ratiometric fluorescent probe for the sensitive and selective detection of coptisine

Coptisine (COP), one of the bioactive components in Rhizoma Coptidis, has many pharmacological effects. Meanwhile, the determination of COP is essential in pharmacological and clinical applications. Herein, we prepared carbon quantum dots (CQDs) by one-step oil-thermal method using paper mill sludge (PMS) as precursor, and developed a ratiometric fluorescence method for the determination of COP. The structural and optical properties of PMS-CQDs were evaluated through HRTEM, FT-IR, XPS, XRD, UV-vis, fluorescence, zeta potential and fluorescence lifetime experiments. Fluorescence intensity ratio at 550 nm and 425 nm (I₅₅₀ /I₄₂₅ ) was recorded as an index for quantitative detection of COP. The detection concentration of COP ranges from 0.1 to 50 μM in good linear correlation (R² = 0.9974) with a limit of detection of 0.028 μM (3σ/k). The quenching mechanism was deduced to be inner filter effect and static quenching. The ratiometric fluorescent probe showed impressive selectivity and sensitivity towards COP, and was successfully applied to the detection of COP in human urine with expected recoveries (95.22-111.00%) and relative standard deviation (0.46-2.95%), indicating that our developed method has a great application prospect in actual sample detection.

The highly sensitive “turn-on” detection of morin using fluorescent nitrogen-doped carbon dots

Graphic diagram of the synthesis of the N-CDs and the N-CDs based fluorescent sensor for the determination of morin.

Altering Chain Flexibility of Aliphatic Polyesters for Yellow-Green Clusteroluminescence in 38 % Quantum Yield

Preparation of non-conjugated polymers with long-wavelength emission and high quantum yield (QY) is still a huge challenge. Herein, we report the first example of linear non-conjugated polyester exhibiting yellow-green clusteroluminescence (CL) and a high QY of 38 %. We discovered that the polyester P3 with balanced flexibility and rigidity showed the longest CL wavelength and highest QY. Systematically photophysical characterization unravel the key role of ester cluster in the CL and the cluster formation via the aggregate of ester units was visualized. Moreover, P3 was demonstrated to be a highly selective, quick-responsive (ca. 1.2 min) and sensitive detector (detection limit is 0.78 μM) for irons owing to the fast disassociation of clusters by irons. This work not only gains further mechanistic insight into CL but also provides a new strategy to design high-efficiency and long-wavelength CL, meanwhile, enlightens the glorious application prospect of luminescent polyester.