Tetracycline antibiotics and NH4+ detection by Zn-organic framework fluorescent probe

Luminol-Eu3+-Gd3+-functionalized mesoporous silica for ultrasensitive detection of tetracycline antibiotics and smartphone-assisted sensing analysis

An organic-inorganic hybrid nanoprobe, namely LML-D-SBA@Eu3+-Gd3+, was constructed, with SBA-15 acting as the carrier material, and luminol and Eu3+ acting as fluorescence channels to achieve ratiometric signals that eliminate external interference (accurate detection). Gd3+ was used as a sensitizer to amplify the red emission of Eu3+ (ultrasensitive detection). In TCs detection, the luminol emission at 428 nm was quenched due to the photoinduced electron transfer mechanism, and the Eu3+ emission at 617 nm was sensitized due to the synergistic energy transfer from TCs and Gd3+ to Eu3+. The fluorescence intensity at 617 and 428 nm showed ratiometric changes as indicated by notable color changes from blue to red. The detection limits for TC and OTC were 0.21 and 0.08 ng/mL, respectively. To realize a facile, rapid, and cost-effective detection, we constructed a portable intelligent sensing platform based on smartphones, and it demonstrated great potential for on-site detection of TCs.

Development of toxic gas sensor from anthocyanin-embedded polycaprolactone-co-polylactic acid nanofibrous mat

The colorless ammonia gas has been a significant intermediate in the industrial sector. However, prolonged exposure to ammonia causes harmful effects to organs or even death. Herein, an environmentally friendly solid-state ammonia sensor was developed utilizing colorimetric polycaprolactone-co-polylactic acid nanofibrous membrane. Pomegranate (Punica granatum L.) peel contains anthocyanin (ACN) as a naturally occurring spectroscopic probe. A mordant (potassium aluminum sulfate) is used to immobilize the anthocyanin direct dyestuff inside nanofibers, generating mordant/anthocyanin (M/ACN) coordinated complex nanoparticles. When exposed to ammonia, the color change of anthocyanin-encapsulated polycaprolactone-co-polylactic acid nanofibrous membrane from purple to transparent was examined by absorbance spectra and CIE Lab color parameters. With a quick colorimetric shift, the polycaprolactone-co-polylactic acid fabric exhibits a detection limit of 5-150 mg/L. The absorbance spectra showed a hypsochromic shift when exposed to ammonia, displaying an absorption shift from 559 nm to 391 nm with an isosbestic point of 448 nm. Scanning electron microscopy (SEM) images revealed that the polycaprolactone-co-polylactic acid nanofibers had a diameter of 75-125 nm, whereas transmission electron microscopy (TEM) images revealed that M/ACN nanoparticles exhibited diameters of 10-20 nm.

Detection mechanism and the outlook of metal-organic frameworks for the detection of hazardous substances in milk

Milk has a high nutritional value. However, milk is easily contaminated in the production, processing, and storage processes, which harms consumers' health. Therefore, the harmful substances' detection in milk is important. Metal-organic frameworks (MOFs) have proven high potential in food safety detection due to their unique porous structure, large effective surface area, large porosity, and structural tunability. This article systematically describes the detection mechanism of fluorescence, electrochemical, colorimetric, and enzyme-linked immunosorbent assay based on MOFs. The progress of the application of MOFs in the detection of antibiotics, harmful microorganisms and their toxins, harmful ions, and other harmful substances in milk in recent years is reviewed. The structural tunability of MOFs enables them to be functionalized, giving the ability to be applied to different detection methods or substances. Therefore, MOFs can be used as an advantageous sensing material for detecting harmful substances in the complex environment of milk.

Facile and efficient preparation of amino bearing metal-organic frameworks-coated cotton fibers for solid-phase extraction of non-steroidal anti-inflammatory drugs in human plasma

The determination of blood concentration of non-steroidal anti-inflammatory drugs (NSAIDs) is highly desired in clinical practice. In this work, three amino bearing metal-organic frameworks (amino-MOFs) coated cotton fibers were prepared using a facile cysteine-triggered in situ growth strategy and proposed as in-tip solid-phase microextraction (in-SPME) adsorbents for efficient extraction of non-steroidal anti-inflammatory drugs from human plasma. The self-made adsorbents exhibited satisfactory extraction performance toward three NSAIDs including diclofenac sodium, ketoprofen and flurbiprofen. Under the optimized conditions, the established method exhibited satisfactory enrichment performance, low limits of detection and excellent extraction efficiency. Good reproducibility, wide linear range, excellent linearity and satisfactory sensitivity were obtained in the experiment. The method was also used for the enrichment and determination of NSAIDs in human plasma samples. Good recoveries were obtained, ranging from 66.5% to 98.9% with relative standard deviations less than 6.62%. The good performance of amino-MOFs was due to the synergistic effects arising from grafted charged amino groups within ordered pores of suitable size, leading to strong affinity towards guest molecules. Electrostatic interaction, hydrogen bond and π-π interaction played a vital role in the extraction of NSAIDs. This report indicated the potential of amino-MOFs as efficient adsorbents for the determination of NSAIDs from human plasma.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

Development of europium(III) complex functionalized silica nanoprobe for luminescence detection of tetracycline

Increasing awareness of the health and environment impacts of the antibiotics misuse or overuse, such as tetracycline (TC) in treatment or prevention of infections and diseases, has driven the development of robust methods for their detection in biological, environmental and food systems. In this work, we report the development of a new europium(III) complex functionalized silica nanoprobe (SiNPs-Eu³⁺) for highly sensitive and selective detection of TC residue in aqueous solution and food samples (milk and meat). The nanoprobe is developed by immobilization of Eu³⁺ ion onto the surface of silica nanoparticles (SiNPs) as the emitter and TC recognition unit. The β-diketone configuration of TC can further coordinate with Eu³⁺ steadily on the surface of nanoprobe, facilitating the absorption of light excitation for Eu³⁺ emitter activation and luminescence "off-on" response. The dose-dependent luminescence enhancement of SiNPs-Eu³⁺ nanoprobe exhibits good linearities, allowing the quantitative detection of TC. The SiNPs-Eu³⁺ nanoprobe shows high sensitivity and selectivity for TC detection in buffer solution. Time resolved luminescence analysis enables the elimination of autofluorescence and light scattering for highly sensitive detection of TC in milk and pork mince with high accuracy and precision. The successful development of SiNPs-Eu³⁺ nanoprobe is anticipated to provide a rapid, economic, and robust approach for TC detection in real world samples.

Detection Enhancement of One Multifunctional Cd-Metal-Organic Framework toward Tetracycline Antibiotics by Simply Mixing Eu3+ in Suspension

It is necessary to find more simple methods to improve the detection selectivity and sensitivity of antibiotics. Herein, we constructed a novel three-dimensional (3D) Cd-MOF LCU-117 assembled from p-terphenyl-4,2″,5″,4'-tetracarboxylic acid, which showed a special 3D helical structure with carboxylic acid ligands and nitrogen-containing ligands crossing each other vertically. Luminescence measurements indicated that LCU-117 has high selectivity and sensitivity toward Eu³⁺ through the ratiometric effect. Meanwhile, this complex itself could detect antibiotics oxytetracycline (OTC) through the turn-off mechanism. When Eu³⁺ was added in suspensions of LCU-117 (noted as Eu³⁺@LCU-117), the detection toward OTC was enhanced significantly and visually. The sensing mechanism was investigated in detail by various measurements and theoretical calculations. LCU-117 has a good effect on the logic gate, potential fingerprint detection, and mixed-matrix membranes (MMMs). The practical application for monitoring OTC in water samples also provided a satisfactory result.

New method for morphological identification and simultaneous quantification of multiple tetracyclines by a white fluorescent probe

The threat of tetracycline antibiotics to the environment and human health is attracting widespread attention. The development of morphological analysis and quantitative techniques of multiple tetracyclines is of great significance for the evaluation of biochemical toxicity, wide-spectrum antibacterial property and degradation cycle between different tetracyclines. In this study, the white fluorescent Eu/Tb@CDs was synthesized and applied successfully to the identification and detection of the most widely used tetracycline antibiotics (tetracycline (TC), oxytetracycline (OC), chlortetracycline (CC) and doxycycline (DC)) with detection limits all below 1 nM. For the actual water samples with coexistence of the above 4 tetracyclines, their simultaneous morphology identification and accurate quantitative detection can also be realized through simple spectrometric measurement. In addition, the selective and competitive experiments have been carried out on the pollutants widely present in water, and the results have also confirmed that other pollutants could not interfere with the detection of the above 4 tetracyclines. It is undeniable that this work will conveniently and visually reveal the existence information and geographical distribution characteristics of different tetracycline antibiotics in the environment and their action mechanism on organisms.

Multifunctional fluorescent Eu-MOF probe for tetracycline antibiotics and dihydrogen phosphate sensing and visualizing latent fingerprints†‡

The contamination of tetracycline antibiotics and dihydrogen phosphate (H₂PO₄⁻) in food and the environment is one of the major concerns for human health. Herein, a water-stable carboxyl-functionalized europium metal–organic framework (Eu-MOF) was prepared and demonstrated, for the first time, as a dual-responsive fluorescent sensor of tetracycline antibiotics (oxytetracycline (OTC), tetracycline (TC), and doxycycline (DOX)) and H₂PO₄⁻via fluorescent turn-on and turn-off, respectively. Eu-MOF presents a sensitive and selective detection of OTC with a rapid response time (1 min) and good anti-interference ability. The limits of detection (LODs) of 78 nm, 225 nm, and 201 nM were achieved for OTC, TC, and DOX, respectively. Coordination and hydrogen bonding led to energy and electron transfer from the TC to the MOF, contributing to the fluorescent enhancement mechanism. Moreover, Eu-MOF can effectively detect H₂PO₄⁻via fluorescence turn-off with a LOD of 0.70 μM. The interactions between H₂PO₄⁻ and MOF interrupt the energy transfer from ligand to MOF, leading to fluorescence quenching. In addition, Eu-MOF was successfully applied to determine OTC and H₂PO₄⁻ in real samples, obtaining satisfactory recoveries and RSDs. More fascinating, Eu-MOF could be utilized to develop latent fingerprints on various surfaces, providing well-defined fluorescent fingerprint details in which the sweat pores can be seen with the naked eye.

Water-stable Eu-MOF as a fluorescent probe for detecting tetracycline antibiotics and dihydrogen phosphate in real samples and visualization of latent fingerprints.

Zinc Ion-Based Switch-on Fluorescence-Sensing Probes for the Detection of Tetracycline

Tetracycline (TC) is an antibiotic that has been widely used in the animal husbandry. Thus, TC residues may be found in animal products. Developing simple and sensitive methods for rapid screening of TC in complex samples is of great importance. Herein, we demonstrate a fluorescence-sensing method using Zn²⁺ as sensing probes for the detection of TC. Although TC can emit fluorescence under the excitation of ultraviolet light, its fluorescence is weak because of dynamic intramolecular rotations, leading to the dissipation of excitation energy. With the addition of Zn²⁺ prepared in tris(hydroxymethyl)amino-methane (Tris), TC can coordinate with Zn²⁺ in the Zn²⁺-Tris conjugates to form Tris-Zn²⁺-TC complexes. Therefore, the intramolecular motions of TC are restricted to reduce nonradiative decay, resulting in the enhancement of TC fluorescence. Aggregation-induced emission effects also play a role in the enhancement of TC fluorescence. Our results show that the linear dynamic range for the detection of TC is 15-300 nM. Moreover, the limit of detection was ~7 nM. The feasibility of using the developed method for determination of the concentration of TC in a complex chicken broth sample is also demonstrated in this work.

Humidity Sensors Based on Metal-Organic Frameworks

Humidity sensors are important in industrial fields and human activities. Metal-organic frameworks (MOFs) and their derivatives are a class of promising humidity-sensing materials with the characteristics of a large specific surface area, high porosity, modifiable frameworks, and high stability. The drawbacks of MOFs, such as poor film formation, low electrical conductivity, and limited hydrophilicity, have been gradually overcome with the development of material science. Currently, it is moving towards a critical development stage of MOF-based humidity sensors from usability to ease of use, of which great challenges remain unsolved. In order to better understand the related challenges and point out the direction for the future development of MOF-based humidity sensors, we reviewed the development of such sensors based on related published work, focusing on six primary types (impedance, capacitive, resistive, fluorescent, quartz crystal microbalance (QCM), and others) and analyzed the sensing mechanism, material design, and sensing performance involved, and presented our thoughts on the possible future research directions.

An Overview of the Design of Metal-Organic Frameworks-Based Fluorescent Chemosensors and Biosensors

Taking advantage of high porosity, large surface area, tunable nanostructures and ease of functionalization, metal-organic frameworks (MOFs) have been popularly applied in different fields, including adsorption and separation, heterogeneous catalysis, drug delivery, light harvesting, and chemical/biological sensing. The abundant active sites for specific recognition and adjustable optical and electrical characteristics allow for the design of various sensing platforms with MOFs as promising candidates. In this review, we systematically introduce the recent advancements of MOFs-based fluorescent chemosensors and biosensors, mainly focusing on the sensing mechanisms and analytes, including inorganic ions, small organic molecules and biomarkers (e.g., small biomolecules, nucleic acids, proteins, enzymes, and tumor cells). This review may provide valuable references for the development of novel MOFs-based sensing platforms to meet the requirements of environment monitoring and clinical diagnosis.

Kill two birds with one stone: Selective and fast removal and sensitive determination of oxytetracycline using surface molecularly imprinted polymer based on ionic liquid and ATRP polymerization

Oxytetracycline (OTC) residue in food and environment has potential threats to ecosystem and human health, thus its sensitive monitoring and effective elimination are very important. In this work, a new molecularly imprinted polymer (MIP) composite was prepared through atom transfer radical polymerization by using OTC as template, gold nanoparticles modified carbon nanospheres (Au-CNS) as supporter, ionic liquids (IL) as functional monomer and cross-linking agent. The obtained MIP-IL@Au-CNS composite was characterized by Fourier transform infrared absorption spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. It displayed high imprinting factor (5.50) and adsorption capacity (56.7 mg g^-1), and could achieved the adsorption equilibrium in short time (about 15 min). Results also illustrated that the adsorption process basically conformed to the quasi-second-order kinetic model and Freundlich model, and MIP-IL@Au-CNS could be recycled at least 5 times. Furthermore, a sensitive OTC electrochemical sensor was developed by combining MIP-IL@Au-CNS with IL-modified carbon nanocomposites (IL@N-rGO-MWCNT). The resulting sensor demonstrated a linear response to OTC in the wide range of 0.02-20 μM, and the detection limit was down to 5 nM. It also had the advantages of high selectivity, fast elution/regeneration and simple construction procedure. The sensor had been applied to the detection of real samples, and acceptable recovery (96.4%-106%) and RSD (3.2%-6.2%) were obtained. This work expands the application of IL-based MIP in pollutant monitoring and enriching.

Zinc(ii) Schiff base complexes as dual probes for the detection of NH4+ and HPO42− ions

Three novel Zn(ii) Schiff base complexes were obtained by solvent evaporation technique. 1 and 2 show selectively recognition of NH4+ and HPO42− accompanied with an efficient fluorescence “turn off” phenomenon.

Facile fabrication and luminescence properties of a new ZnII coordination polymer-based fluorescent sensor toward antibiotics

A new ZnII-based coordination polymer could selectively and sensitively recognize NFT and DCN via turn-off effect. Interestingly, a mixed matrix film for visualizable sensing has been successfully developed.

Methyl Blue@CUST-580 composite as a simultaneous fluorescence-enhanced dual-emission platform for enhanced detection of antibiotics

A novel Cd-based MOF fluorescent sensor, [(Cd)2O(BIMB)0.5(BTB)] [CUST-580, H3BTB= 1,3,5- Tris(4-carboxyphenyl) benzene, BIMB = 1,4-Bis((1H-imidazoi-1-yl) methyl) bezene] was successfully synthesized by solvothermal condition. Due to the unique 3D spatial structure...