Polymer surface ligand and silica coating induced highly stable perovskite nanocrystals with enhanced aqueous fluorescence for efficient Hg2+ and glutathione detection

Sn4+ Alloying and Chiral Incorporation into Tellurium Halides Triggering Tunable Luminescence Emission and Second-Harmonic Generation

Recently, chiral organic-inorganic hybrid metal halides have attracted considerable interest as promising multifunctional materials, benefiting from their diverse structures and tunable photophysical properties. Herein, by introducing the chiral ligand methylbenzylamine (R-/S-MBA) and alloying Sn4+ cation, a series of tellurium-based halides R-/S-MBA2SnxTe1-xCl6 (x = 0, 0.125, 0.2, 0.365 and 0.54) with second-harmonic generation (SHG) effect and photoluminescence (PL) properties are successfully synthesized. Their optical bandgaps are determined to be 2.48-2.6 eV. Specifically, the introduction of chiral organic cations could break the structural symmetry and cause the tellurium halide to crystallize in the chiral space group. The incorporation of isovalent Sn4+ into the chiral host tellurium halides results in the increase in octahedral distortion, thereby promoting host intrinsic self-trapped emission that originates from the interconfigurational 3P0,1 → 1S0 transitions of Te4+. Consequently, the as-prepared Sn4+ doped halides, R-/S-MBA2SnxTe1-xCl6 (x = 0.365, 0.54), exhibit not only SHG response but also bright orange fluorescence. This study provides an effective strategy for designing chiral multifunctional materials.

Aqueous-phase dual-functional chiral perovskites for hydrogen sulfide (H2S) detection and antibacterial applications in Escherichia coli

Perovskite nanocrystals (PNCs) have attracted extensive attention for their potential applications in biology. However, only a handful of PNCs have been scrutinized in the biological domain due to issues such as instability, poor dispersion, and size inhomogeneity in polar solvents. The development of dual-functional perovskite nanomaterials with hydrogen sulfide (H2S) sensing and antibacterial capabilities is particularly intriguing. In this study, we prepared chiral quasi-two-dimensional (quasi-2D) perovskite nanomaterials, Bio(S-PEA)2CsPb2Br7 and Bio(R-PEA)2CsPb2Br7, that were uniformly dispersed in aqueous media. The effective encapsulation of methoxypolyethylene glycol amine (mPEG-NH2) improved water stability and uniformity of particle size. Circular dichroism (CD) signals were created by the successful insertion of chiral cations. These perovskites as probes showed a rapid and sensitive fluorescence quenching response to H2S, and the effect of imaging detection was observed at the Escherichia coli (E. coli) level. As antibacterial agents, their pronounced positive charge properties facilitated membrane lysis and subsequent E. coli death, indicating a significant antibacterial effect. This work has preliminary explored the application of chiral perovskites in biology and provides insight into the development of bifunctional perovskite nanomaterials for biological applications.

Sensing Utilities of Cesium Lead Halide Perovskites and Composites: A Comprehensive Review

Recently, the utilization of metal halide perovskites in sensing and their application in environmental studies have reached a new height. Among the different metal halide perovskites, cesium lead halide perovskites (CsPbX3; X = Cl, Br, and I) and composites have attracted great interest in sensing applications owing to their exceptional optoelectronic properties. Most CsPbX3 nanostructures and composites possess great structural stability, luminescence, and electrical properties for developing distinct optical and photonic devices. When exposed to light, heat, and water, CsPbX3 and composites can display stable sensing utilities. Many CsPbX3 and composites have been reported as probes in the detection of diverse analytes, such as metal ions, anions, important chemical species, humidity, temperature, radiation photodetection, and so forth. So far, the sensing studies of metal halide perovskites covering all metallic and organic-inorganic perovskites have already been reviewed in many studies. Nevertheless, a detailed review of the sensing utilities of CsPbX3 and composites could be helpful for researchers who are looking for innovative designs using these nanomaterials. Herein, we deliver a thorough review of the sensing utilities of CsPbX3 and composites, in the quantitation of metal ions, anions, chemicals, explosives, bioanalytes, pesticides, fungicides, cellular imaging, volatile organic compounds (VOCs), toxic gases, humidity, temperature, radiation, and photodetection. Furthermore, this review also covers the synthetic pathways, design requirements, advantages, limitations, and future directions for this material.

Selective detection of ascorbic acid by tuning the composition and fluorescence of the cesium lead halide perovskite nanocrystals

Lead halide perovskite nanocrystals (PNCs) have attracted intense attention due to their excellent optoelectronic properties. In this work, a series of water-stable CsPb(Br/I)3PNCs fluorescent probes were prepared using an anion exchange method. It was found that the PNCs probes could be used to detect ascorbic acid (AA) in water, and interestingly, the FL spectra of the PNCs probes can be adjusted by controlling the concentration of KI in anion exchange to improve the detection selectivity of AA. The high sensitivity and selectivity make CsPb(Br/I)3PNCs an ideal material for AA sensing. The concentration of AA can be linearly measured in the range from 0.01 to 50μM, with a detection limit of 4.2 nM. The reason for the enhanced FL of CsPb(Br/I)3PNCs was studied, and it is considered that AA causes the aggregation of CsPb(Br/I)3PNCs. This strategy of improving the selectivity of the probe to the substrate by adjusting the spectrum will significantly expand the application of PNCs in the field of analysis and detection.

p-Thiocresol Functionalized Cesium Lead Bromide (PTC@CsPbBr3): A Fluorometric Sensing Probe for the Detection of Cholesterol

Inorganic halide-based perovskites (e.g., cesium lead bromide) are tremendously useful semiconducting materials due to their unique optoelectronic properties. However, degradation of these perovskites under humid conditions is one of the major drawbacks to prevent their wide applications. Herein, passivated cesium lead bromide nanoparticles are synthesized using p-thiocresol as a passivating ligand, and this stable version of perovskite is later applied successfully as a sensor probe towards cholesterol detection. The designed sensor can detect cholesterol with a lower detection limit of 0.24 ppm and a fast response time of 10 s. The mechanism of quenching PTC@CsPbBr3 upon the gradual addition of cholesterol is discussed. Further, the sensor is successfully applied in the detection of cholesterol in real samples (blood serum). This work presents PTC@CsPbBr3 as a novel sensing platform for detecting cholesterol well in biomedical applications.

Improving the stability of perovskite nanocrystals via SiO2 coating and their applications

Lead halide perovskite nanocrystals (LHP NCs) with outstanding optical properties have been regarded as promising alternatives to traditional phosphors for lighting and next-generation display technology. However, the practical applications of LHP NCs are seriously hindered by their poor stability upon exposure to moisture, oxygen, light, and heat. Hence, various strategies have been proposed to solve this issue. In this review, we have focused our attention on improving the stability of LHP NCs via SiO2 coating because it has the advantages of simple operation, less toxicity, and easy repetition. SiO2 coating is classified into four types: (a) in situ hydrolytic coating, (b) mesoporous silica loading, (c) mediated anchoring, and (d) double coating. The potential applications of SiO2-coated LHP NCs in the field of optoelectronics, biology, and catalysis are presented to elucidate the reliability and availability of SiO2 coating. Finally, the future development and challenges in the preparation of SiO2-coated LHP NCs are analyzed in order to promote the commercialization process of LHP NC-related commodities.

Synthesis of a water-stable CsPbBr3 perovskite for selective detection of mercury ion in water

By using the method of low-temperature crystallization, CsPbBr3 perovskite nanocrystals (PNCs) coated with trifluoroacetyl lysine (Tfa-Lys) and oleamine (Olam) were synthesized in aqueous solution. The structure of the CsPbBr3 PNCs was characterized by many methods, such as ultraviolet (UV)-visible absorption spectrophotometer, fluorescence spectrophotometer, transmission electron microscopy (TEM), and X-ray diffraction (XRD) pattern. The fluorescence emission of the CsPbBr3 PNCs is stable in water for about 1 day at room temperature. It was also found that the fluorescence of the PNCs could be obviously and selectively quenched after the addition of mercury ion (Hg2+ ), allowing a visual detection of Hg2+ by the naked eye under UV light illumination. The fluorescence quenching rate (I0 /I) has a good linear relationship with the addition of Hg2+ in the concentration range 0.075 to 1.5 mg/L, with a correlation coefficient (R2 ) of 0.997, and limit of detection of 0.046 mg/L. The fluorescence quenching mechanism of the PNCs was determined by the fluorescence lifetime and X-ray photoelectron spectroscopy (XPS) of the PNCs. Overall, the synthesis method for CsPbBr3 PNCs is simple and rapid, and the as-prepared PNCs are stable in water that could be conveniently used for selective detection of Hg2+ in the water environment.

An efficient chitosan-naphthalimide fluorescent probe for simultaneous detection and adsorption of Hg2+ and its application in seafood, water and soil environments

As a virulent heavy metal ion, Hg2+ will lead to a serious threat to ecosystem and human health. In this work, we reported a chitosan-naphthalimide fluorescent probe CS-NA-ITC for specific recognition and efficient adsorption of Hg2+. CS-NA-ITC showed no fluorescence in solution state, while the fluorescence intensity increased obviously at the presence of Hg2+, accompanied by the fluorescence color becomes from colorless to bright yellow. It displayed favorable properties like low detection limit (73 nM), extensive pH detection range (5-10) and excellent anti-interference ability. The binding pattern of CS-NA-ITC to Hg2+ was verified by Job's plot, XPS analysis and FT-IR test. In addition, CS-NA-ITC was utilized to recognition of Hg2+ in actual water and soil samples and seafood products. Furthermore, the CS-NA-ITC hydrogel could be employed as an efficient Hg2+ adsorbent with good reusability, which adsorption ability was enhanced compared to chitosan hydrogel.

Biomolecules incorporated in halide perovskite nanocrystals: synthesis, optical properties, and applications

Halide perovskite nanocrystals (HPNCs) have emerged at the forefront of nanomaterials research over the past two decades. The physicochemical and optoelectronic properties of these inorganic semiconductor nanoparticles can be modulated through the introduction of various ligands. The use of biomolecules as ligands has been demonstrated to improve the stability, luminescence, conductivity and biocompatibility of HPNCs. The rapid advancement of this field relies on a strong understanding of how the structure and properties of biomolecules influences their interactions with HPNCs, as well as their potential to extend applications of HPNCs towards biological applications. This review addresses the role of several classes of biomolecules (amino acids, proteins, carbohydrates, nucleotides, etc.) that have shown promise for improving the performance of HPNCs and their potential applications. Specifically, we have reviewed the recent advances on incorporating biomolecules with HP nanomaterials on the formation, physicochemical properties, and stability of HP compounds. We have also shed light on the potential for using HPs in biological and environmental applications by compiling some recent of proof-of-concept demonstrations. Overall, this review aims to guide the field towards incorporating biomolecules into the next-generation of high-performance HPNCs for biological and environmental applications.

A novel aggregation-induced emission fluorescent probe with large Stokes shift for sensitive detection of pH changes in live cells

The detection of intracellular pH is crucial for elucidating the pathological process of cancers, as well as for medical diagnostic applications. Here, we developed an aggregation-induced emission active pH-responsive fluorescent probe (TPE-DCP) for sensitively detecting cell pH changes. The probe shows obvious pH-sensing properties at ~615 nm, with a pKa value of 6.82 and a good linear pH response ranging from 8.5 to 4.5. TPE-DCP holds advantages such as excellent anti-interference performance, good photostability, and low cytotoxicity, and has been successfully used to image intracellular pH changes in cells.

Chromophoric Ion Receptor-Decorated Porous Monolithic Polymer for the Solid-State Naked Eye Sensing of Hg(II): An Experimental and Theoretical Approach

The current work presents a perspective to obliterate toxic Hg(II) from an aqueous environment, a strategic environmental remediation and decontamination measure. We report a simple, efficient, and reusable solid-state visual sensing strategy for the selective detection and quantitative recovery of ultratrace Hg(II). The capture of Hg(II) ions was effectuated using a macro-/mesoporous polymer monolith uniformly decorated with an azo-based chromophoric ion receptor, i.e., 7-((1H-benzo[d]imidazol-2-yl)diazenyl)quinolin-8-ol (BIDQ). The porous polymer template was synthesized through free radical polymerization of gylcidylmethacrylate and ethylene glycol dimethacrylate, leading to distinct structural and surface properties that offer exclusive solid-state colorimetric selectivity for Hg(II) upon restricted spatial dispersion of the ion receptor. The sensor provides a broad linear response range of 1-200 μg/L, with an outstanding detection limit of 0.2 μg/L for Hg(II) ions, thus effectuating reliable and reproducible sensing. Optimizing analytical parameters such as solution pH, receptor concentration, sensor quantity, kinetics, temperature, and matrix interference proved to be promising for the real-time monitoring of toxic mercury ions from aqueous/industrial systems, with maximum response in the pH range of 7.5-8.0, with a response time of ≤80 s. Density functional theory (DFT) calculations were employed to study the electronic structure of BIDQ upon chelating with Hg(II) ions, using 6-311G and LAND2Z basis sets.

A Critical Review on the Development of Optical Sensors for the Determination of Heavy Metals in Water Samples. The Case of Mercury(II) Ion

Recent publications are reviewed concerning the development of sensors for the determination of mercury in drinking water, based on spectroscopic methodologies. A critical analysis is made of the specific details and figures of merit of the developed protocols. Special emphasis is directed to the validation and applicability to real samples in the usual concentration range of mercury, considering the maximum allowed limits in drinking water established by international regulations. It was found that while most publications describe in detail the synthesis, structure, and physicochemical properties of the sensing phases, they do not follow the state of the art in the analytical developments. Recommendations are provided regarding the proper method development and validation, including the setting of the calibration concentration range, the correct estimation of the limits of detection and quantitation, the concentration levels to be set for producing spiked water samples, the number of real samples for adequate validation, the comparison of the developed method with a reference technique, and other analytical features which should be followed.

Incorporation of perovskite nanocrystals into lanthanide metal-organic frameworks with enhanced stability for ratiometric and visual sensing of mercury in aqueous solution

In-situ growth of CsPbBr₃ nanocrystal into Eu-BTC was realized for synthesis of dual-emission CsPbBr₃@Eu-BTC by a facile solvothermal method, and a novel ratiometric fluorescence sensor based on the CsPbBr₃@Eu-BTC was prepared for rapid, sensitive and visual detection of Hg²⁺ in aqueous solution. The transmission electron microscopy (TEM), X-ray diffraction pattern (XRD), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) analysis were used to verify the successful incorporation of CsPbBr₃ into the Eu-BTC. Meanwhile, the CsPbBr₃@Eu-BTC nanocomposite maintained high fluorescence performance and stability in aqueous solution. After adding Hg²⁺, the green fluorescence of CsPbBr₃ was quenched and the red fluorescence of Eu³⁺ remained unchanged, while the color changed from green to red obviously. The occurrence of dynamic quenching and electron transfer were verified by fluorescence lifetime, Stern-Volmer quenching constant and XPS analysis. The ratiometric fluorescence sensor shows high analytical performance for Hg²⁺ detection with a wide linear range of 0-1 μM and a low detection limit of 0.116 nM. In addition, it also shows high selectivity for the detection of Hg²⁺ and can be successfully applied to detect Hg²⁺ in environmental water samples. More importantly, a novel paper-based sensor based on the CsPbBr₃@Eu-BTC ratiometric probe was successfully manufactured for the visual detection of Hg²⁺ by naked eyes. This new type of ratiometric fluorescent sensor shows great potential for applications in point-of-care diagnostics.

Amphiphilic Polymer Ligand-Assisted Synthesis of Highly Luminescent and Stable Perovskite Nanocrystals for Sweat Fluorescent Sensing

The weak interfacial binding affinities of the inorganic perovskite core with ligands and high density of surface defect states induce the facile detachment of surface ligands from nanocrystals (NCs), resulting in their poor colloidal stability and fluorescence in aqueous. In this work, a powerful ligand engineering strategy was proposed for eliminating the surface defects and aggregation of the NCs. Using an amphiphilic polymer octylamine-modified polyacrylic acid (OPA) as a capping ligand, the as-synthesized CsPbBr₃ NCs retain high photoluminescence intensity and stability by the modified ligand-assisted reprecipitation method. The increase in the fluorescence lifetime and NC size could also be observed, and how the NC particle size influences fluorescence lifetime was further studied. In addition, the water stability, photostability, and thermal stability were significantly improved, and the fluorescence of NCs can maintain 80.13% of the original value in water for 15 d. We further validated that the strong binding affinity of OPA and oleylamine ligands with CsPbBr₃ NCs leads to a reduction in surface trap states, and a large amount of carboxyl groups of the OPA made the NCs preserve good water solubility. In addition, the OPA has the ability of adjusting the particle size of NCs. Furthermore, a wavelength-shifted colorimetric sensor based on these NCs was constructed for detection of Cl^- in sweat, which enables the rapid and visual detection of Cl^- with high accuracy and stability. Overall, these CsPbBr₃ NCs synthesized by the ligand engineering strategy validated their wide applications in biomedical sensing fields.