Ultrasound-assisted switchable hydrophilic solvent-based homogeneous liquid-liquid microextraction for the determination of triazole fungicides in environmental water by GC-MS

Lignin-based emulsive liquid-liquid microextraction for detecting triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS

A universal, green, and rapid lignin-based emulsive liquid-liquid microextraction (ELLME) method was established to detect nine triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS. By employing an environmentally friendly emulsifier (lignin), the proposed ELLME was compatible with more extractants, and not restricted to fatty acids. Due to the high amphiphilic properties and three-dimensional structure of lignin, the emulsion was quickly formed through several aspirate-dispense cycles of the green extractant (guaiacol) and lignin solution. And a micropipette was used for rapid microextraction. The limit of detection was 0.0002-0.0057 μg L-1. The extraction recoveries and relative standard deviation were 81.7%-102.0% and 0.9%-7.1%, respectively. Finally, three green metric tools were used to verify the greenness of the whole procedure. The proposed lignin-based ELLME successfully emulsified green solvents, indicating that emerging solvents may be excellent alternatives as extractants in ELLME for pesticide residue analysis in food samples.

Triazoles in the environment: An update on sample pretreatment and analysis methods

Triazoles, due to their high bactericidal performance, have been widely used in the agricultural, clinical, and chemical industry. However, triazoles have been proven to cause endocrine-toxic and organ impairment in humans as a potentially toxic substance. Besides, because of the improper use and difficulty of degradation, triazoles pesticide residues left in the environment could pose a threat to the environment. Therefore, the rapid, reliable, accurate, and high-sensitivity triazoles analysis methods are significantly essential to effectively monitor their presence in various samples and safeguard human health. This review aims to summarize and update the progress of the pretreatment and analytical methods of triazole fungicides in environmental samples from 2012 to 2024. Common pretreatment methods used to extract and purify targets include simple steps (e.g., protein precipitation and coated blade spray), liquid-liquid extraction, solid-phase extraction, and various microextraction methods such as liquid-phase microextraction and solid-phase microextraction, among others. Detection methods mainly include liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, supercritical fluid chromatography, sensing methods, and capillary electrophoresis. In addition, we elaborate and compare the advantages and disadvantages of different pretreatment and analytical methods, and their development prospects are discussed.

Quick synthesis of CoFe-PBA@GO with electrochemical method as a novel, sensitive, and degradable nanocomposite applied in nanofibers for triazole extraction before HPLC-UV analysis

Today, the wide use of triazole fungicides due to environmental damage and its side effects has raised global concern. Hence, in this research, poly-vinyl alcohol/polyacrylic-acid/CoFe-PBA@GO electrospun nanofiber was synthesized and applied as effective, degradable, and novel adsorbent at pipette-tip microextraction (PT-μSPE) method for the rapid and concurrent extraction of five of triazole fungicides in fruit and vegetable samples prior to quantitative analysis by high-performance liquid chromatography-ultraviolet. The incorporation of CoFe-PBA@GO with superporous structure and abundant functional groups in a polymer medium improves the extraction efficiency of nanofibers due to hydrogen bonding and π-π interactions formed between analytes and synthesized nano-adsorbent. Various important elements that affect the extraction yield of the target analytes were optimized utilizing a time-variable approach. Under the optimum conditions, dynamic range was attained in the range of 0.3-900.0 ng/mL with correlation coefficients ≥ 0.999. The identification limit of the PT-μSPE-HPLC-UV method ranged from 0.1 to 0.3 ng/mL.

Edible oil-based switchable-hydrophilicity solvent liquid-liquid microextraction prior to smartphone digital image colorimetry for the determination of total curcuminoids in food samples

Edible oil-based switchable-hydrophilicity solvent liquid-liquid microextraction was coupled with smartphone digital image colorimetry for the determination of total curcuminoids. Images of the colored extracts were captured in a laboratory-made colorimetric box, which were then split into their red-green-blue channels. Optimum extraction conditions were achieved using 550 μL of almond oil as the extraction solvent and 0.40 M sodium hydroxide for hydrolysis of the oil to the salt of its fatty acid. Phosphoric acid (2.0 mL, 4.0 M) was used as the hydrophilicity-switching trigger, while pH of the sample solution adjusted to 5.50 and extraction time of 1.0 min, were found to be optimum. Optimum detection conditions were achieved at a distance of 7.0 cm from the detection camera, a region of interest of 175 px2, a detection wavelength of 420 nm and 50.0% brightness of the light source. The limit of detection was found to be 0.020 μg mL-1. A good linearity was achieved as indicated by coefficients of determination above 0.9965. The proposed method was used for the determination of total curcuminoids in tea and turmeric samples with percentage relative recoveries of 95.0-105.0% and percentage relative standard deviations below 8.7%.

Amine Switchable Hydrophilic Solvent Vortex-Assisted Homogeneous Liquid-Liquid Microextraction and GC-MS for the Enrichment and Determination of 2, 6-DIPA Additive in Biodegradable Film

2, 6-diisopropylaniline (2, 6-DIPA) is a crucial non-intentionally organic additive that allows the assessment of the production processes, formulation qualities, and performance variations in biodegradable mulching film. Moreover, its release into the environment may have certain effects on human health. Hence, this study developed simultaneous heating hydrolysis-extraction and amine switchable hydrophilic solvent vortex-assisted homogeneous liquid-liquid microextraction for the gas chromatography-mass spectrometry analysis of the 2, 6-DIPA additive and its corresponding isocyanates in poly(butylene adipate-co-terephthalate) (PBAT) biodegradable agricultural mulching films. The heating hydrolysis-extraction conditions and factors influencing the efficiency of homogeneous liquid-liquid microextraction, such as the type and volume of amine, homogeneous-phase and phase separation transition pH, and extraction time were investigated and optimized. The optimum heating hydrolysis-extraction conditions were found to be a H2SO4 concentration of 2.5 M, heating temperature of 87.8 °C, and hydrolysis-extraction time of 3.0 h. As a switchable hydrophilic solvent, dipropylamine does not require a dispersant. Vortex assistance is helpful to speed up the extraction. Under the optimum experimental conditions, this method exhibits a better linearity (0.0144~7.200 μg mL-1 with R = 0.9986), low limit of detection and quantification (0.0033 μg g-1 and 0.0103 μg g-1), high extraction recovery (92.5~105.4%), desirable intra- and inter-day precision (relative standard deviation less than 4.1% and 4.7%), and high enrichment factor (90.9). Finally, this method was successfully applied to detect the content of the additive 2, 6-DIPA in PBAT biodegradable agricultural mulching films, thus facilitating production process monitoring or safety assessments.

Dispersive magnetic solid phase extraction of triazole fungicides based on polybenzidine/magnetic nanoparticles in environmental samples

A polybenzidine-modified Fe3O4@SiO2 nanocomposite was successfully synthesized through a chemical oxidation method and employed as a novel sorbent in dispersive magnetic solid phase extraction (DMSPE) for the preconcentration and determination of three triazole fungicides (TFs), namely diniconazole, tebuconazole, and triticonazole in river water, rice paddy soil, and grape samples. The synthesis method involved a polybenzidine self-assembly coating on Fe3O4@SiO2 magnetic composite. Characterization techniques such as FT-IR, XRD, FESEM, EDX, and VSM were used to confirm the correctness of the synthesized nano-sorbent. The target TFs were determined in actual samples using the synthesized nanocomposite sorbent in combination with gas chromatography-flame ionization detection (FID). Several variables were carefully optimized , including the sample pH, sorbent dosage, extraction time, ionic strength, and desorption condition (solvent type, volume, and time). Under the optimized experimental conditions, the method exhibited linearity in the concentration range 5-1000 ng mL-1 for triticonazole and 2-1000 ng mL-1 for diniconazole and tebuconazole. The limits of detection (LOD) for the three TFs were in the range 0.6-1.5 ng mL-1. The method demonstrated acceptable precision with intra-day and inter-day relative standard deviation (RSD) values of less than 6.5%. The enrichment factors ranged from 248 to 254. Finally, the method applicability was evaluated by determining TFs in river water, rice paddy soil, and grape samples with recoveries in the range 90.5-106, indicating that the matrix effect was negligible in the proposed DMSPE procedure.

pH-responsive switchable deep eutectic solvents to mediate pretreatment method for trace analysis of triazole fungicides in peel wastes

The existing QuEChERS-combined analytical pretreatment methods are limited by large reagent consumption, high environmental burden, and mediocre effects. To provide an efficient and green pretreatment method, this study developed pH-responsive switchable deep eutectic solvents (SDESs) to extract triazole fungicides (TFs) from fruit peel wastes, which could enhance the preconcentration effect of target compounds in food waste samples with complex matrices. The mechanisms of pH-induced phase transition and hydrophobicity-hydrophilicity conversion of pH-responsive SDESs were investigated by pH phase diagrams and chemical characterization techniques, respectively. We validated the established method by high-performance liquid chromatography-diode array detector (HPLC-DAD), and lower LOD (0.089-0.351 ng mL^-1), LOQ (0.297-1.172 ng mL^-1), RSD (≤8.8 %) and satisfactory recoveries (90.6 %-110.9 %) and preconcentration factors (389-512) were obtained in rotting grape peel, watermelon peel, and orange peel samples. Our findings highlight the potential of pH-responsive SDESs in the extraction and analysis of various natural food products.