Phosphorescent multinuclear complexes for optoelectronics: tuning of the excited-state dynamics

Di(pyridin-2-yl)amino-substituted 1,10-phenanthrolines and their Ru(II)-Pd(II) dinuclear complexes: synthesis, characterization and application in Cu-free Sonogashira reaction

Dinuclear complexes bearing Ru(II) photoactive centers are of interest for the development of efficient dual catalysts for many photocatalyzed reactions. Ditopic polypyridine ligands, bis(pyridin-2-yl)amino-1,10-phenanthrolines, containing an additional coordination site (bis(pyridin-2-yl)amine, dpa) at positions 3, 4 or 5 of the 1,10-phenanthroline core (Phen-3NPy2, Phen-4NPy2 and Phen-5NPy2) were synthesized. They were used as bridging ligands to obtain dinuclear complexes [(bpy)2Ru(Phen-NPy2)PdCl2](PF6)2 (Ru(Phen-NPy2)Pd) in good yields via stepwise complexation. In these complexes Ru(II) is coordinated to 1,10-phenanthroline, while Pd(II) is bound to the dpa chelating moiety, as established by NMR spectroscopy and X-ray single crystal analysis. The influence of the position of dpa in the phenanthroline ring on the structural, optical and electrochemical properties of Ru(Phen-NPy2)Pd complexes was studied. The complexes exhibit photoluminescence in argon-saturated MeCN solution with maxima in the range of 615-625 nm, with emission quantum yields ranging from 0.11 to 0.15 for Ru(Phen-NPy2) complexes and from 0.018 to 0.026 for dinuclear Ru(Phen-NPy2)Pd complexes. All the complexes absorb visible light in the range of 370-470 nm with high extinction coefficients and can be considered useful as photocatalysts. The Ru2+/3+ potential in Ru(Phen-NPy2)Pd complexes showed no significant dependence on the dpa position, while the Pd2+/0 reduction potential was significantly lower for Ru(Phen-3NPy2)Pd and Ru(Phen-4NPy2)Pd, than for Ru(Phen-5NPy2)Pd (-0.57 V and -0.72 V vs. Ag/AgCl, KCl(sat.), respectively). The complexes were used as photoactivated precatalysts in Cu-free Sonogashira coupling under blue LEDs (12 W) irradiation. The reaction proceeded roughly three times faster when Ru(Phen-4NPy2)Pd and Ru(Phen-3NPy2)Pd were used as catalyst precursors compared to the mixed catalytic system Ru(bpy)3(PF6)2/(RNPy2)PdCl2.

Adaptive photoluminescence through a bioinspired antioxidative mechanism

Transition metal complexes are archetypal luminescent probes that are widely used for various applications ranging from optoelectronics to biomedicine. However, they face significant challenges such as photobleaching and photooxidative stress, which limit their performance. Herein, we introduce a photosystem-inspired concept based on the use of a vitamin (ascorbic acid, Asc-Ac) to adaptively suppress photobleaching of molecular luminophores. As a proof-of-concept compound, we have selected a new bis-cyclometalated Pt(II) complex (Pt-tBu) and investigated its adaptive photoluminescence resulting from singlet dioxygen (1O2) photoproduction in the presence of Asc-Ac. Interestingly, the excited state quenching and subsequent photobleaching of Pt-tBu in aerated solutions is suppressed by addition of Asc-Ac, which scavenges the 1O2 photosensitized by Pt-tBu upon irradiation and results in an adaptive oxygen depletion with enhancement of luminescence. The adaptation is resilient for successive irradiation cycles with oxygen replenishment, until peroxidation overshooting leads to the degradation of Pt-tBu by formation of a dark Pt(iv) species. The complexity-related adaptation with initial overperformance (luminescence boost) relies on the external energy input and cascaded feedback loops, thus biomimicking inflammation, as the repeated exposure to a stressor leads to a final breakdown. Our antioxidative protection mechanism against photobleaching can be successfully extended to multiple coordination compounds (e.g., Ir(iii), Ru(ii) and Re(i) complexes), thus demonstrating its generality. Our findings broaden the scope of molecular adaptation and pave the way for enhancing the stability of molecular luminophores for multiple applications.

Unveiling the key role of metal coordination mode and ligand's side groups on the performance of deep-red light-emitting electrochemical cell

Three novel deep-red to near-infrared (DR to NIR) emitters based on mononuclear and dinuclear ruthenium(II) complexes with bulky structures were presented herein. For the first time, the unusual effects of metal coordination mode on the electroluminescence properties of a binuclear emitter were investigated. Unexpectedly, the mononuclear complexes showed superior performance in deep-red light-emitting electrochemical cells (DR-LEC) compared to the dinuclear complex. Likewise, substituting various ancillary ligands improved the radiance and lifetime of devices by 2.5 and 1.5 times, respectively. To the best of our knowledge, the obtained efficiency is among the best reported to date for DR-LECs based on ruthenium polypyridyl complexes.

Neutral 2-phenylbenzimidazole-based iridium(III) complexes with picolinate ancillary ligand: tuning the emission properties by manipulating the substituent on the benzimidazole ring

We report the synthesis and characterization of ten neutral bisheteroleptic iridium(III) complexes with 2-phenylbenzimidazole cyclometallating ligand and picolinate as ancillary ligand. The 2-phenylbenzimidazole has been modified by selected substituents introduced on the cyclometallating ring and/or on the benzimidazole moiety. The integrity of the complexes has been assessed by NMR spectroscopy, by high-resolution mass spectrometry and by elemental analysis. The complexes are demonstrated to be highly phosphorescent at room temperature and a luminescence study with comprehensive ab initio calculations allow us to determine the lowest emitting excited state which depends on the substituent nature and its position on the cyclometallating ligand.

Welcoming Neighbour or Inhospitable Host? Selective Second Metal Binding in 5- and 6-Phospha-Substituted Bpy Ligands

The controlled formation of mixed-metal bimetallics was realised through use of a fac-[Re(CO)3(N,N'-bpy-P)Cl] complex bearing an exogenous 2,4,6-trioxa-1,3,5,7-tetramethyl-8-phosphaadamantane donor at the 5-position of the bpy. The introduction of gold, silver, and rhodium with appropriate secondary ligands was readily achieved from established starting materials. Restricted rotation about the C(bpy)-P bond was observed in several of the bimetallic complexes and correlated with the relative steric bulk of the second metal moiety. Related chemistry with the 6-substituted derivative proved more limited in scope with only the bimetallic Re/Au complex being isolated.

Molecularly Engineered Room-Temperature Phosphorescence for Biomedical Application: From the Visible toward Second Near-Infrared Window

Phosphorescence, characterized by luminescent lifetimes significantly longer than that of biological autofluorescence under ambient environment, is of great value for biomedical applications. Academic evidence of fluorescence imaging indicates that virtually all imaging metrics (sensitivity, resolution, and penetration depths) are improved when progressing into longer wavelength regions, especially the recently reported second near-infrared (NIR-II, 1000-1700 nm) window. Although the emission wavelength of probes does matter, it is not clear whether the guideline of "the longer the wavelength, the better the imaging effect" is still suitable for developing phosphorescent probes. For tissue-specific bioimaging, long-lived probes, even if they emit visible phosphorescence, enable accurate visualization of large deep tissues. For studies dealing with bioimaging of tiny biological architectures or dynamic physiopathological activities, the prerequisite is rigorous planning of long-wavelength phosphorescence, being aware of the cooperative contribution of long wavelengths and long lifetimes for improving the spatiotemporal resolution, penetration depth, and sensitivity of bioimaging. In this Review, emerging molecular engineering methods of room-temperature phosphorescence are discussed through the lens of photophysical mechanisms. We highlight the roles of phosphorescence with emission from visible to NIR-II windows toward bioapplications. To appreciate such advances, challenges and prospects in rapidly growing studies of room-temperature phosphorescence are described.

Unusual Effects of the Metal Center Coordination Mode on the Photophysical Behavior of the Rhenium(I) and Rhenium(I)-Iridium(III) Complexes

Binuclear transition-metal complexes based on conjugated systems containing coordinating functions are potentially suitable for a wide range of applications, including light-emitting materials, sensors, light-harvesting systems, photocatalysts, etc., due to energy-transfer processes between chromophore centers. Herein we report on the synthesis, characterization, photophysical, and theoretical studies of relatively rare rhenium(I) and rhenium(I)-iridium(III) dyads prepared by using the nonsymmetrical polytopic ligands (NN2 and NN3) with the strongly conjugated phenanthroline and imidazole-quinoline/pyridine coordinating fragments. Availability of these different diimine chelating functions and targeted synthetic procedures allowed one to obtain a series of mononuclear (Re and Ir) and binuclear (Re-Re and Re-Ir) metal complexes with various modes of {Re(CO)3Cl} and {Ir(NC)2} metal fragment coordination. The obtained compounds were characterized by 1D 1H and 2D (COSY and NOESY) NMR spectroscopy, mass spectrometry, elemental analysis, and X-ray diffraction crystallography. The photophysical study of the complexes (absorption, excitation and emission spectra, quantum yields, and excited-state lifetimes) showed that their emission parameters display strong dependence on the manner of metal center coordination to the diimine bidentate functions. The mononuclear complexes with an unoccupied imidazole-quinoline/pyridine fragment [Re(NN2), Re(NN3), and Ir(NC2)2(NN2)] or those containing a coordinated {Ir(NC)2} fragment in this position [Ir(NC2)2(NN1) and Re(NN2)Ir(NC1)2-Re(NN2)Ir(NC4)2] exhibit moderate-to-intense phosphorescence (quantum yields vary from 3% to 56% in a degassed solution), whereas the complexes containing a {Re(CO)3Cl} moiety in the imidazole-quinoline/pyridine position [Re2(NN2), Re2(NN3), and Ir(NC2)2(NN2)Re] demonstrate a strong reduction in the phosphorescence efficiency with a quantum yield of ≪0.1%. Quenching of the phosphorescence in the latter types of emitters is discussed in terms of a strong decrease in the radiative rate constants for these complexes compared to their analogues mentioned above, while the nonradiative constants remain nearly unchanged. Theoretical density functional theory (DFT) and time-dependent DFT (TD DFT) calculations, including evaluation of the radiative rate constants for the couple of structurally analogous complexes with and without a {Re(CO)3Cl} moiety coordinated to the imidazole-quinoline/pyridine chelating function, confirmed the observed trend in the variation of the emission intensity.

Binuclear Copper(I) Complexes for Near-Infrared Light-Emitting Electrochemical Cells

Two binuclear heteroleptic CuI complexes, namely Cu-NIR1 and Cu-NIR2, bearing rigid chelating diphosphines and π-conjugated 2,5-di(pyridin-2-yl)thiazolo[5,4-d]thiazole as the bis-bidentate ligand are presented. The proposed dinuclearization strategy yields a large bathochromic shift of the emission when compared to the mononuclear counterparts (M1-M2) and enables shifting luminescence into the near-infrared (NIR) region in both solution and solid state, showing emission maximum at ca. 750 and 712 nm, respectively. The radiative process is assigned to an excited state with triplet metal-to-ligand charge transfer (3 MLCT) character as demonstrated by in-depth photophysical and computational investigation. Noteworthy, X-ray analysis of the binuclear complexes unravels two interligand π-π-stacking interactions yielding a doubly locked structure that disfavours flattening of the tetrahedral coordination around the CuI centre in the excited state and maintain enhanced NIR luminescence. No such interaction is present in M1-M2. These findings prompt the successful use of Cu-NIR1 and Cu-NIR2 in NIR light-emitting electrochemical cells (LECs), which display electroluminescence maximum up to 756 nm and peak external quantum efficiency (EQE) of 0.43 %. Their suitability for the fabrication of white-emitting LECs is also demonstrated. To the best of our knowledge, these are the first examples of NIR electroluminescent devices based on earth-abundant CuI emitters.

Organometallic Ir(III) complexes: post-synthetic modification, photophysical properties and binuclear complex construction

Two methods of post-synthetic modification (Suzuki coupling and CuAAC click-reaction) were applied to Ir(III) complexes [Ir(C^{^}N)₂N^{^}N]⁺ to provide the second highly selective donor site. One family of functionalized complexes was used to demonstrate the potential of post-synthetic modification for controlled construction of d-d and d-f binuclear complexes. The complexes obtained were characterized by CHN elemental analysis, NMR spectroscopy, ESI mass-spectrometry, FTIR spectroscopy and single crystal X-ray diffraction analysis. By means of XPS and NEXAFS spectroscopy the coordination of diimine donor site to the Ln(III) centre has been definitely confirmed. The photophysical properties of mono- and binuclear complexes were carefully investigated, and the evolution of luminescent characteristics during the formation of a system of connected metallocenters is also discussed. TDDFT calculations were used to describe the luminescence mechanism and to confirm the conclusions made on the basis of experimental data.

A family of CuI-based 1D polymers showing colorful short-lived TADF and phosphorescence induced by photo- and X-ray irradiation

Exploiting 2-(alkylsulfonyl)pyridines as 1,3-N,S-ligands, herein we have constructed 1D CuI-based coordination polymers (CPs) bearing unprecedented (CuI)_n chains and possessing remarkable photophysical properties. At room temperature, these CPs show efficient TADF, phosphorescence or dual emission in the deep-blue to red range with outstandingly short decay times of 0.4-2.0 μs and good quantum performance. Owing to great structural diversity, the CPs demonstrate a variety of emissive mechanisms, spanning from TADF of ¹(M + X)LCT type to ³CC and ³(M + X)LCT phosphorescence. Moreover, the designed compounds emit strong X-ray radioluminescence with the quantum efficiency of up to an impressive 55% relative to all-inorganic BGO scintillators. The presented findings push the boundaries in designing TADF and triplet emitters with very short decay times.

Spin-Orbit Couplings for Nonadiabatic Molecular Dynamics at the ΔSCF Level

A procedure for the calculation of spin-orbit coupling (SOC) at the delta self-consistent field (ΔSCF) level of theory is presented. Singlet and triplet excited electronic states obtained with the ΔSCF method are expanded into a linear combination of singly excited Slater determinants composed of ground electronic state Kohn-Sham orbitals. This alleviates the nonorthogonality between excited and ground electronic states and introduces a framework, similar to the auxiliary wave function at the time-dependent density functional theory (TD-DFT) level, for the calculation of observables. The ΔSCF observables of the formaldehyde system were compared to reference TD-DFT values. Our procedure gives all components (energies, gradients, nonadiabatic couplings, and SOC terms) at the ΔSCF level of theory for conducting efficient, full-atomistic nonadiabatic molecular dynamics with intersystem crossing, particularly in condensed phase systems.

The ΔSCF method for non-adiabatic dynamics of systems in the liquid phase

Computational studies of ultrafast photoinduced processes give valuable insights into the photochemical mechanisms of a broad range of compounds. In order to accurately reproduce, interpret, and predict experimental results, which are typically obtained in a condensed phase, it is indispensable to include the condensed phase environment in the computational model. However, most studies are still performed in vacuum due to the high computational cost of state-of-the-art non-adiabatic molecular dynamics (NAMD) simulations. The quantum mechanical/molecular mechanical (QM/MM) solvation method has been a popular model to perform photodynamics in the liquid phase. Nevertheless, the currently used QM/MM embedding techniques cannot sufficiently capture all solute-solvent interactions. In this Perspective, we will discuss the efficient ΔSCF electronic structure method and its applications with respect to the NAMD of solvated compounds, with a particular focus on explicit quantum mechanical solvation. As more research is required for this method to reach its full potential, some challenges and possible directions for future research are presented as well.

Supramolecular gating of TADF process in self-assembled nano-spheres for high-resolution OLED applications

Acridine-based donor-acceptor chromophores exhibiting E-type delayed fluorescence were substituted with bis-biuret H-bonding motifs to induce the formation of hollow spheres which can be deposited from solution to form the active component of OLED devices. In solution, the contribution of the delayed component is sensitive to disruption of the aggregates.

Inherently dinuclear iridium(III) meso architectures accessed by cyclometalation of calix[4]arene-based bis(aryltriazoles)

Conventional cyclometalation of calix[4]arene bis(aryltriazoles) with iridium(III) chloride hydrate leads to unique meso architectures in which the Ir₂Cl₂ core is cross-bound by two (C^N)₂ ligands, which allows further replacement of the chloride bridges with ancillary ligands while maintaining the dinuclear structures of the complexes having independent or coupled iridium pairs.

Synthesis and photoelectric properties of IrIII complexes using fluorobenzylimidazole[2,1-b]thiazole derivatives as primary ligands

Twelve novel phosphorescent IrIII complexes based on fluorobenzimidazole[2,1-b]thiazole derivatives as primary ligands with luminescent nearly full colors.