Converting p-terphenyl into a novel organo-catalyst for LED-driven energy and electron transfer photoreactions in water

Mechanistic investigations of polyaza[7]helicene in photoredox and energy transfer catalysis

Organic photocatalysts frequently possess dual singlet and triplet photoreactivity and a thorough photochemical characterization is essential for efficient light-driven applications. In this article, the mode of action of a polyazahelicene catalyst (Aza-H) was investigated using laser flash photolysis (LFP). The study revealed that the chromophore can function as a singlet-state photoredox catalyst in the sulfonylation/arylation of styrenes and as a triplet sensitizer in energy transfer catalysis. The singlet lifetime is sufficiently long to exploit the exceptional excited state reduction potential for the activation of 4-cyanopyridine. Photoinduced electron transfer generating the radical cation was directly observed confirming the previously proposed mechanism of a three-component reaction. Several steps of the photoredox cycle were investigated separately, providing deep insights into the complex mechanism. The triplet-excited Aza-H, which was studied with quantitative LFP, is formed with a quantum yield of 0.34. The pronounced triplet formation was exploited for the isomerization reaction of (E)-stilbene to the Z-isomer and the cyclization of cinnamyl chloride. Catalyst degradation mainly occurs through the long-lived Aza-H triplet (28 µs), but the photostability is greatly increased when the triplet efficiently reacts in a catalytic cycle such that turnover numbers exceeding 4400 are achievable with this organocatalyst.

Chromophore Planarity, -BH Bridge Effect, and Two-Photon Activity: Bi- and Ter-Phenyl Derivatives as a Case Study

In this work, we have employed electronic structure theories to explore the effect of the planarity of the chromophore on the two-photon absorption properties of bi- and ter-phenyl systems. To that end, we have considered 11 bi- and 7 ter-phenyl-based chromophores presenting a donor-π-acceptor architecture. In some cases, the planarity has been enforced by bridging the rings at ortho-positions by -CH2 and/or -BH, -O, -S, and -NH moieties. The results presented herein demonstrate that in bi- and ter-phenyl systems, the planarity achieved via a -CH2 bridge increases the 2PA activity. However, the introduction of a bridge with the -BH moiety perturbs the electronic structure to a large extent, thus diminishing the two-photon transition strength to the lowest electronic excited state. As far as two-photon absorption activity is concerned, this work hints toward avoiding -BH bridge(s) to enforce planarity in bi- and ter-phenyl systems; however, one may use -CH2 bridge(s) to achieve the enhancement of the property in question. All of these conclusions have been supported by in-depth analyses based on generalized few-state models.

Triplet quenching pathway control with molecular dyads enables the identification of a highly oxidizing annihilator class

Metal complex - arene dyads typically act as more potent triplet energy donors compared to their parent metal complexes, which is frequently exploited for increasing the efficiencies of energy transfer applications. Using unexplored dicationic phosphonium-bridged ladder stilbenes (P-X2+) as quenchers, we exclusively observed photoinduced electron transfer photochemistry with commercial organic photosensitizers and photoactive metal complexes. In contrast, the corresponding pyrene dyads of the tested ruthenium complexes with the very same metal complex units efficiently sensitize the P-X2+ triplets. The long-lived and comparatively redox-inert pyrene donor triplet in the dyads thus provides an efficient access to acceptor triplet states that are otherwise very tricky to obtain. This dyad-enabled control over the quenching pathway allowed us to explore the P-X2+ photochemistry in detail using laser flash photolysis. The P-X2+ triplet undergoes annihilation producing the corresponding excited singlet, which is an extremely strong oxidant (+2.3 V vs. NHE) as demonstrated by halide quenching experiments. This behavior was observed for three P2+ derivatives allowing us to add a novel basic structure to the very limited number of annihilators for sensitized triplet-triplet annihilation in neat water.

Blue-to-UVB Upconversion, Solvent Sensitization and Challenging Bond Activation Enabled by a Benzene-Based Annihilator

Several energy-demanding photoreactions require harsh UV light from inefficient light sources. The conversion of low-energy visible light to high-energy singlet states via triplet-triplet annihilation upconversion (TTA-UC) could offer a solution for driving such reactions under mild conditions. We present the first annihilator with an emission maximum in the UVB region that, combined with an organic sensitizer, is suitable for blue-to-UVB upconversion. The annihilator singlet was successfully employed as an energy donor in subsequent FRET activations of aliphatic carbonyls. This hitherto unreported UC-FRET reaction sequence was directly monitored using laser spectroscopy and applied to mechanistic irradiation experiments demonstrating the feasibility of Norrish chemistry. Our results provide clear evidence for a novel blue light-driven substrate or solvent activation strategy, which is important in the context of developing more sustainable light-to-chemical energy conversion systems.

Cyclometalated Spirobifluorene Imidazolylidene Platinum(II) Complexes with Predominant 3LC Emissive Character and High Photoluminescence Quantum Yields

Two novel bidentate C^C*_spiro cyclometalated platinum(II) complexes comprising a spiro-conjugated bifluorene ligand and different β-diketonate auxiliary ligands are synthesized and characterized. Their preparation employs a robust and elaborate synthetic protocol commencing with an N-heterocyclic carbene precursor. Structural characterization by means of NMR techniques and solid-state structures validate the proposed and herein presented molecular scaffolds. Photophysical studies, including laser flash photolysis methods, reveal an almost exclusively ligand-centered triplet state, governed by the C^C*_spiro-NHC ligand. The high triplet energies and the long triplet lifetimes in the order of 30 μs in solution make the complexes good candidates for light-emitting diode-driven photocatalysis, as initial energy transfer experiments reveal. In-depth time-dependent density functional theory investigations are in excellent accordance with our spectroscopic findings. The title compounds are highly emissive in the bluish-green color region with quantum yields of up to 87% in solid-state measurements.

Water-soluble ruthenium complex-pyrene dyads with extended triplet lifetimes for efficient energy transfer applications

Long triplet lifetimes of excited photosensitizers are essential for efficient energy transfer reactions in water, given that the concentrations of dissolved oxygen and suitable acceptors in aqueous media are typically much lower than in organic solvents. Herein, we report the design, synthesis and photochemical characterization of two structurally related water-soluble ruthenium complex-based dyads decorated with a covalently attached pyrene chromophore. The triplet energy of the latter is slightly below that of the metal complex enabling a so-called triplet reservoir and excited-state lifetime extensions of up to two orders of magnitude. The diimine co-ligands, which can be modified easily, have a major impact on both the ultrafast intramolecular energy transfer (iEnT) kinetics upon excitation with visible light and the lifetime of the resulting long-lived pyrene triplet. The phenanthroline-containing dyad shows fast triplet pyrene formation (25 ps) and an exceptionally long triplet lifetime beyond 50 microseconds in neat water. The iEnT process via the Dexter mechanism is slower by a factor of two when bipyridine co-ligands are employed, which is rationalized by a poor orbital overlap. Both dyads are very efficient sensitizers for the formation of singlet oxygen in air-saturated water as well as for the bimolecular generation of anthracene triplets that are key intermediates in upconversion mechanisms. This is demonstrated by the 5-hydroxymethylfurfural oxidation, which yields completely different main products depending on the pH value of the aqueous solution, as an initial application-related experiment and by time-resolved spectroscopy. Our findings are important in the greater contexts of photocatalysis and energy conversion in the "green" solvent water.

Efficient Triplet-Triplet Annihilation Upconversion Sensitized by a Chromium(III) Complex via an Underexplored Energy Transfer Mechanism

Sensitized triplet-triplet annihilation upconversion (sTTA-UC) mainly relies on precious metal complexes thanks to their high intersystem crossing (ISC) efficiencies, excited state energies, and lifetimes, while complexes of abundant first-row transition metals are only rarely utilized and with often moderate UC quantum yields. [Cr(bpmp)₂ ]³⁺ (bpmp=2,6-bis(2-pyridylmethyl)pyridine) containing earth-abundant chromium possesses an absorption band suitable for green light excitation, a doublet excited state energy matching the triplet energy of 9,10-diphenyl anthracene (DPA), a close to millisecond excited state lifetime, and high photostability. Combined ISC and doublet-triplet energy transfer from excited [Cr(bpmp)₂ ]³⁺ to DPA gives ³ DPA with close-to-unity quantum yield. TTA of ³ DPA furnishes green-to-blue UC with a quantum yield of 12.0 % (close to the theoretical maximum). Sterically less-hindered anthracenes undergo a [4+4] cycloaddition with [Cr(bpmp)₂ ]³⁺ and green light.

Water-Soluble Tris(cyclometalated) Iridium(III) Complexes for Aqueous Electron and Energy Transfer Photochemistry

Cyclometalated iridium(III) complexes are frequently employed in organic light emitting diodes, and they are popular photocatalysts for solar energy conversion and synthetic organic chemistry. They luminesce from redox-active excited states that can have high triplet energies and long lifetimes, making them well suited for energy transfer and photoredox catalysis. Homoleptic tris(cyclometalated) iridium(III) complexes are typically very hydrophobic and do not dissolve well in polar solvents, somewhat limiting their application scope. We developed a family of water-soluble sulfonate-decorated variants with tailored redox potentials and excited-state energies to address several key challenges in aqueous photochemistry.

First, we aimed at combining enzyme with photoredox catalysis to synthesize enantioenriched products in a cyclic reaction network. Since the employed biocatalyst operates best in aqueous solution, a water-soluble photocatalyst was needed. A new tris(cyclometalated) iridium(III) complex provided enough reducing power for the photochemical reduction of imines to racemic mixtures of amines and furthermore was compatible with monoamine oxidase (MAO-N-9), which deracemized this mixture through a kinetic resolution of the racemic amine via oxidation to the corresponding imine. This process led to the accumulation of the unreactive amine enantiomer over time. In subsequent studies, we discovered that the same iridium(III) complex photoionizes under intense irradiation to give hydrated electrons as a result of consecutive two-photon excitation. With visible light as energy input, hydrated electrons become available in a catalytic fashion, thereby allowing the comparatively mild reduction of substrates that would typically only be reactive under harsher conditions. Finally, we became interested in photochemical upconversion in aqueous solution, for which it was desirable to obtain water-soluble iridium(III) compounds with very high triplet excited-state energies. This goal was achieved through improved ligand design and ultimately enabled sensitized triplet–triplet annihilation upconversion unusually far into the ultraviolet spectral range.

Studies of photoredox catalysis, energy transfer catalysis, and photochemical upconversion typically rely on the use of organic solvents. Water could potentially be an attractive alternative in many cases, but photocatalyst development lags somewhat behind for aqueous solution compared to organic solvent. The purpose of this Account is to provide an overview of the breadth of new research perspectives that emerged from the development of water-soluble fac-[Ir(ppy)]₃ complexes (ppy = 2-phenylpyridine) with sulfonated ligands. We hope to inspire the use of some of these or related coordination compounds in aqueous photochemistry and to stimulate further conceptual developments at the interfaces of coordination chemistry, photophysics, biocatalysis, and sustainable chemistry.

Vinylcyclopropane [3+2] Cycloaddition with Acetylenic Sulfones Based on Visible Light Photocatalysis**

The first intermolecular visible light [3+2] cycloaddition reaction performed on a meta photocycloadduct employing acetylenic sulfones is described. The developed methodology exploits the advantages of combining UV and visible‐light in a two‐step sequence that provides a photogenerated cyclopropane which, through a strain‐release process, generates a new cyclopentane ring while significantly increasing the molecular complexity. Mechanistic studies and DFT calculations indicate an energy transfer pathway for the visible light‐driven reaction step. This strategy could be extended to simpler vinylcyclopropanes.