Photocatalytic oxidation of NO on reduction type semiconductor photocatalysts: effect of metallic Bi on CdS nanorods

Plant-Based Phytochemicals for Synthesis of Z-Scheme In2O3/CdS Heterostructures: DFT Analysis and Photocatalytic CO2 Reduction to HCOOH and CO

Photocatalytic CO2 reduction shows potential for mitigating industrial emissions. Z-scheme In2O3/CdS(bio) heterostructures (25 nm, 217.0 m2 g-1 surface area) with a more negative conduction band synthesized using phytochemicals present in Aegle marmelos with short microwave irradiation inhibit CdS(bio) photocorrosion forming SO42-. In2O3/CdS(bio) increased the photocurrent density (0.82 μA cm-2) and CO2 adsorption (0.431 mmol g-1) significantly compared to CdS(bio) and In2O3(bio) NPs. Heterostructures increased decay time and reduced PL intensity by 46.28 and 61.80% over those of CdS(bio) and In2O3(bio) NPs. Density functional theory (DFT)-optimized geometry, band structure analysis, and density of states (DOS) studies indicate that the DOS of CdS is modified with In2O3 incorporation, enhancing charge separation. Optimal 0.4In2O3/CdS(bio) heterostructures exhibit remarkable CO2 conversion to HCOOH/CO production of 514.4/162 μmol g-1 h-1 (AQY 4.44/2.45%), surpassing CdS(bio) and In2O3(bio) by 9 and 6.5 times, and retain their morphological and structural stability. This study provides valuable insight for developing bio-based CdS heterostructures for photocatalytic CO2 reduction.

Remarkable Enhancement of Photocatalytic Activity of High-Energy TiO2 Nanocrystals for NO Oxidation through Surface Defluorination

The superior photocatalytic activity of TiO2 nanocrystals with exposed high-energy (001) facets, achieved through the use of hydrofluoric acid as a shape-directing reagent, is widely reported. However, in this study, we report for the first time the detrimental effect of surface fluorination on the photoreactivity of high-energy faceted TiO2 nanocrystals towards NO oxidation (resulting in a NO removal rate of only 5.9%). This study aims to overcome this limitation by exploring surface defluorination as an effective strategy to enhance the photocatalytic oxidation of NO on TiO2 nanocrystals enclosed with (001) facets. We found that surface defluorination, achieved through either NaOH washing (resulting in an improved NO removal rate of 23.2%) or calcination (yielding an enhanced NO removal rate of 52%), leads to a large increase in the photocatalytic oxidation of NO on TiO2 nanocrystals with enclosed (001) facets. Defluorination processes stimulate charge separation, effectively retarding recombination and significantly promoting the production of reactive oxygen species, including superoxide radicals (·O2-), singlet oxygen (1O2), and hydroxyl radicals (·OH). Both in situ diffuse reflectance infrared Fourier-transform spectroscopy and density functional theory calculations confirm the higher adsorption of NO after defluorination, thus facilitating the oxidation of NO on TiO2 nanocrystals.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Increasing the Photocatalytic Hydrogen Generation Activity of CdS Nanorods by Introducing Interfacial and Polarization Electric Fields

Cadmium sulfide (CdS) is a photocatalyst widely used for efficient H2 production under visible light irradiation, due to its narrow bandgap and suitable conduction band position. However, the fast recombination of carriers results in their low utilization. In order to improve photocatalytic hydrogen production, it reports the successful introduction of metallic Cd and S vacancies on CdS nanorods (CdS NRs) by a facile in situ chemical reduction method, using a thermal treatment process. This procedure generates interfacial and polarization electric fields, that significantly improve the photocatalytic hydrogen production performance of CdS NRs in sodium sulfide and sodium sulfite aqueous solutions, under visible light irradiation (λ >420 nm). The introduction of these electric fields is believed to improve charge separation and facilitate faster interfacial charge migration, resulting in a significantly optimized catalyst, with a photocatalytic hydrogen evolution rate of up to 10.6 mmol-1  g-1  h-1 with apparent quantum efficiency (AQE) of 12.1% (420 nm), which is 8.5 times higher than that of CdS. This work provides a useful method to introduce metallic and S vacancies on metal sulfide photocatalysts to build local polarization and interfacial electric fields for high-performance photocatalytic H2 production.

Surface Acidification of BiOI/TiO2 Composite Enhanced Efficient Photocatalytic Degradation of Benzene

A novel BiOI/TiO2 nano-heterojunction was prepared using hydrothermal and sol-gel methods. The composite material was characterized by X-ray diffraction, ultraviolet-visible diffuse reflection spectroscopy, scanning electron microscopy, and transmission electron microscopy. The crystallinity and response to light of BiOI/TiO2 were controlled by preparation conditions such as the optimal solvent condition and heat treatment temperature. The photocatalytic activity of the BiOI/TiO2 catalyst was examined using benzene as a test molecule. The benzene degradation rate of the composite catalyst under visible light was enhanced compared to pure TiO2, thus reaching 40% of the original benzene concentration, which increased further to >60% after surface acidification. The fluorescence spectra, light current, and electron paramagnetic resonance confirmed that the enhanced activity was attributed to carrier separation by the heterojunction. The acid sites and active chlorine of hydrochloric acidification offer a novel mechanism for photocatalytic reactions.

Recent Progress of Natural Mineral Materials in Environmental Remediation

Organic contaminants, volatile organic compounds (VOCs), and heavy metals have posed long-term threats to the ecosystem and human health. Natural minerals have aroused widespread interest in the field of environmental remediation due to their unique characteristics such as rich resources, environmentally benign, and excellent photoelectric properties. This review briefly introduced the contributions of natural minerals such as sulfide minerals, oxide minerals, and oxysalt minerals in pollution control, which include organic pollution degradation, sterilization, air purification (NO VOCs oxidation), and heavy metal treatment by means of photocatalysis, Fenton catalysis, persulfate activation, and adsorption process. At last, the future challenges of natural mineral materials in pollution control are also outlooked.

Research progress in metal sulfides for photocatalysis: From activity to stability

Metal sulfides are a type of reduction semiconductor photocatalysts with narrow bandgap and negative conduction band potential, which make them have unique photocatalytic performance in solar-to-fuel conversion and environmental purification. However, metal sulfides also suffer from low quantum efficiency and photocorrosion. In this review, the strategies to improve the photocatalytic activity of metal sulfide photocatalysts by stimulating the charge separation and improving light-harvesting ability are introduced, including morphology control, semiconductor coupling and surface modification. In addition, the recent research progress aiming at improving their photostability is also illustrated, such as, construction of hole transfer heterojunctions and deposition of hole transfer cocatalysts. Based on the electronic band structures, the applications of metal sulfides in photocatalysis, namely, hydrogen production, degradation of organic pollutants and reduction of CO₂, are summarized. Finally, the perspectives of the promising future of metal-sulfide based photocatalysts and the challenges remaining to overcome are also presented.

Crystal-facet and microstructure engineering in ZnO for photocatalytic NO oxidation

Photocatalysis is believed to be an important way of reducing NO pollutant in air and the facet engineering of semiconducting oxides could enhance the efficiency of the photocatalysis. ZnO nanoparticles with different exposed crystalline facets were successfully synthesized using a hydrothermal method and their photocatalytic degradation towards NO was investigated. The crystals from ZnCl₂ precursor were hexagonal mesoporous ones with exposed (0002) facet, while those from zinc acetate were in the form of flakes or wheat ears with enhanced exposure of (101(-)1) facet. Calcination in air imparted an enhanced the textural coefficient of the orientated facets as well as the oxygen defects. The nanocrystals with enhanced (0002) facet and lower flat-band energy did better in photoelectrochemical water-oxidation than those with exposed (101(-)1) facet that showed superior photocatalytic activity (approaching 76.7 ± 0.6% under 365 nm photons) for NO oxidation. According to theoretical calculations, (101(-)1) facet with O termination showed much higher affinity to NO molecules than other configurations, and the oxygen vacancy in ZnO played an minor role in the photocatalytic oxidation of NO. A high quantum efficiency approaching 97.5 ± 1.4% under 275 nm photons was obtained for the ZnO crystals from zinc acetate with mixed (0002) and (101(-)1) facets. This research explores the special characteristics of ZnO with different exposed facets and is important for the future design of highly efficient photocatalyst for hazardous material removal.

Dispersible CdS1-xSex solid-solution nanocrystal photocatalysts: Photoinduced self-transformation synthesis and enhanced hydrogen-evolution activity

Modulating the electronic structure of Cadmium sulfide (CdS) by non-metallic elements to produce solid-solution photocatalysts serves as a potential route to improve its performance of photocatalytic hydrogen (H₂) evolution. However, exploring an effective synthetic route of CdS-based solid solution is still a great challenge. Herein, the CdS_1-xSe_x solid-solution nanocrystals were successfully synthesized by an accessible photoinduced self-transformation route, including the direct formation of dispersible CdS_1-x(SeS)_x and the in situ self-transformation of selenosulfide ((SeS)^2-) to Se^2- by photoexcited electrons. The prepared CdS_1-xSe_x solid-solution photocatalysts possess a small crystallite size of ca. 5 nm and their bandgaps can be easily tuned in a wide range of 1.84-2.28 eV by tailoring the mole ratio of Se/S. The resultant CdS_0.90Se_0.10 solid-solution photocatalyst realizes the highest H₂-production tempo of 94.6 μmol·h^-1, which is 1.6 folds higher than that of CdS. The experimental and theoretical studies supported that the incorporation of Se atoms could not only narrow the bandgap value to reinforce visible-light absorption, but also tune its electronic structure to optimize interfacial H₂-evolution dynamics, thus achieving an efficient photocatalytic H₂-production rate of the dispersible CdS_1-xSe_x solid solution. This study may deliver advanced inspirations for optimizing the electronic structure of photocatalysts towards sustainable H₂ production.

6-Aza-2-thio-thymine-gold nanoclusters: an excellent candidate in the photoelectrochemical field

The high performance of the photoelectrochemical (PEC) properties of AuNCs can be achieved with 6-aza-2-thio-thymine-AuNCs (ATT-AuNCs) as a photoactive material. The ATT-AuNCs yielded a cathodic photocurrent density as high as 88 μA cm^-2 with O₂ as electron acceptor, which is three orders of magnitude higher than those of other AuNCs in aqueous solutions. Moreover, ATT-AuNCs also show a higher carrier density, shorter Debye length, and smaller depletion layer width than those of reported AuNCs. This work not only reveals the PEC performance and mechanism of ATT-AuNCs, but also establishes a framework for in-depth design and studying the PEC performance of AuNCs.

Fabrication of three-dimensional hierarchical porous 2D/0D/2D g-C3N4 modified MXene-derived TiO2@C: Synergy effect of photocatalysis and H2O2 oxidation in NO removal

A novel three-dimensional multi-level porous g-C₃N₄ modified MXene-derived TiO₂@C aerogel (g-C₃N₄/TiO₂@C aerogel) was synthesized for NO removal. Through SEM analysis, 2D g-C₃N₄ and 2D Ti₃C₂ nanosheets were constructed into an interconnected macroscopic framework with continuous macropores via ice template. OD TiO₂ nanoparticles uniformly covered 2D C nanosheets with irregular mesopores and macropores in in-situ oxidation of Ti₃C₂ nanosheets by calcination via TEM analysis. g-C₃N₄/TiO₂@C aerogel for photocatalytic activation of hydrogen peroxide (H₂O₂) had an excellent efficiency of 90.7% for NO removal at parts per million level. This efficiency was 4.9 times and 7.8 times that of g-C₃N₄/TiO₂@C aerogel and H₂O₂ individually, due to the synergy between photocatalysis and H₂O₂ oxidation. Meantime, g-C₃N₄/TiO₂@C aerogel exhibited an enhanced performance compared with g-C₃N₄ nanosheet (55.7%) and TiO₂@C aerogel (38.5%). It was attributed to the large specific surface area (93.82 m²/g) with hierarchical mesoporous and macroporous structure and the 2D/OD/2D heterojunction of g-C₃N₄/TiO₂@C aerogel, further enhancing electron-hole separation. The mechanism was hypothesized that g-C₃N₄/TiO₂@C aerogel activated H₂O₂ to generate hydroxyl radicals (·OH) and superoxide radicals (·O₂^-) for oxidation of NO.

High-efficiency photocatalytic degradation of rhodamine 6G by organic semiconductor tetrathiafulvalene in weak acid-base environment

Tetrathiafulvalene (TTF) was successfully applied to degrade rhodamine 6G (Rh6G) in photocatalytic system. The results exhibited that TTF had excellent suitability in the range of weak acid to weak base (pH = 5-9). Multiple reactive oxygen species (˙OH, ¹O₂, H₂O₂ and ˙O₂^-) as well as h⁺ and e^- were generated in photocatalytic process, causing the rapid degradation of Rh6G. This study provides new ideas for the development of catalysts in photocatalytic system and the broader applications of organic semiconductor materials.

Preparation and characterization of a self-dispersed and reactive TiO2/BiOBr photocatalyst for self-cleaning and ultraviolet resistant cotton fabrics

A novel and efficient approach is presented herein to develop self-cleaning and ultraviolet resistant cotton fabrics loaded with a self-dispersed and reactive TiO2/BiOBr photocatalyst.