High-sensitively fluorescent switch-type sensing for Ag+ and halide anions of 2D Cd-based network constructed with logic gates

Effective detection of the concentration of Ag+ ions in bactericidal fluid is one of the necessary conditions for their effective utilization for sterilization. A novel 2D Cd(II) coordination polymer (CP1), named as [Cd(HDPN)(4,4'-bbpy)]·2H2O, was hydrothermally synthesized using 5-(2',4'-dicarboxylphenyl) nicotic acid (H3DPN) and 4,4'-bis(imidazolyl)biphenyl (4,4'-bbpy). The structure analysis discovered that CP1 possessed a 2D network structure of dinuclear inorganic building blocks. Fluorescence sensing discovered that CP1 could high-sensitively detect Ag+, tetracycline, nitrobenzene and pyrimethanil and the lowest limit of detection (LOD) were 1.44 × 10-8M, 2.15 × 10-8M, 8.09 × 10-8M, and 2.54 × 10-7M, respectively. It is worth noting that the quenching occurs after the addition of Ag+ to the aqueous solution of CP1, and then it gradually recovers when one of the halide anions (X- = Cl-, Br- and I-) is added, forming a unique "on-off-on" fluorescence sensor for Ag+ and constructing a simple logic gate. The fluorescence sensing mechanism of CP1 was investigated using ultraviolet-visible spectroscopy, PXRD, XPS, and DFT methods. The research indicates that CP1 is anticipated to serve as an excellent multifunctional fluorescence sensor, especially as a switch-type sensor for Ag+ and the halide anions.

Unveiling the multifaceted applications of magnetically responsive chitosan capped ZnS QDs for sensing and annihilation of pharmaceutical drugs

The persistence of active pharmaceutical ingredients in water bodies has lead to detrimental impacts on public health as well as deteriorated aquatic resources at breakneck pace. To address this, highly fluorescent chitosan capped ZnS QDs (CZS QDs) were integrated with nickel ferrite nanoparticles (NF NPs) through ultrasonic assisted method to yield a series of magnetically responsive CZS-xNF nanohybrids (x = 5, 10, 15 and 20 wt% of NF). The successful fabrication of nanohybrids were affirmed through various techniques such as Fourier transform infra-red spectroscopy (FT-IR), powder X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), high resolution transmission electron microscopy (HRTEM), vibrating sample magnetometer (VSM) and diffused reflectance spectroscopy (DRS). The dual applicability of CZS-xNF nanohybrid was witnessed for the detection of pharmaceutical waste by fluorescence sensing and their concomitant annihilation via visible light driven photodegradation reactions. The developed nanohybrid showed exceptional selectivity towards tetracycline antibiotics, with ultra-low limit of detection of 0.53 μM for tetracycline (TC) and 0.30 μM for minocycline (MC), respectively. The fluorescent sensor was also analysed for trace level detection of tetracyclines in real water samples that showed satisfactory recoveries of 90-106%, depicting practical applicability of sensor. Additionally, the excellent photocatalytic features of synthesized nanohybrid prompted their use in photodegradation of TC and MC and a superior photocatalytic performance was achieved in comparison to CZS QDs. The enhanced photocatalytic performance of CZS-xNF nanohybrid can be attributed to type-I charge transfer mechanism, which resulted in efficient charge separation and reduced photo-induced recombination rate of charge carriers. The nanohybrids were recyclable up to four cycles after being utilized in sensing and photocatalysis, thus offering a promising strategy for environmental remediation through synchronized sensing and extirpation of pharmaceutical waste.

A Ni(II) Coordination Polymer as a Multifunctional Luminescent Sensor for Detection of UO22+, Cr2O72-, CrO42- and Nitrofurantoin

A new Ni coordination polymer [Ni(MIP)(BMIOPE)]_n (1) was constructed (BMIOPE = 4,4'-bis(2-methylimidazol-1-yl)diphenyl ether, and H₂MIP = 5-methylisophthalic acid), possessing two-dimensional (2D) twofold parallel interwoven net structure with a 4⁴∙6² point symbol. Complex 1 has been successfully obtained based on mixed-ligand strategy. The fluorescence titration experiments revealed that complex 1 could act as multifunctional luminescent sensor to simultaneously detect UO₂²⁺, Cr₂O₇^2- and CrO₄^2-, and NFT (nitrofurantoin). The limit of detection (LOD) values for complex 1 are 2.86 × 10^-5, 4.09 × 10^-5, 3.79 × 10^-5 and 9.32 × 10^-5 M for UO₂²⁺, Cr₂O₇^2-, CrO₄^2- and NFT. The K_sv values are 6.18 × 10³, 1.44 × 10⁴, 1.27 × 10⁴ and 1.51 × 10⁴ M^-1 for NFT, CrO₄^2-, Cr₂O₇^2- and UO₂²⁺. Finally, the mechanism of its luminescence sensing is studied in detail. These results manifest that complex 1 is a multifunctional sensor for sensitive fluorescent UO₂²⁺, Cr₂O₇^2-, CrO₄^2- and NFT detection.

Smart prototype for an electronic color sensor device for visual simultaneous detection of macrofuran based on a coated paper strip

Nowadays, in the clinical, pharmaceutical, and environmental sectors, the development of facile and sensitive analytical methods and/or innovative devices for the follow-up and detection of antibiotics and pharmaceutical formulations, in general, are urgently needed and still challenging. This work declared three vital applications for broad-spectrum nitrofurantoin (macrofuran) antibiotic detection and quantification: A colorimetric method, a coated paper strip-based nano-lanthanum complex prototype and fabrication of smart electronic color sensor device-based coated paper strips. The colorimetric method showed a significant response upon increasing the concentration of the nitrofurantoin in a range between (1.0–100.0 ng/mL) via a visual color change from orange-yellow to red colors degree with detection and quantification limits of 0.175 and 0.53 ng/mL, respectively, whereas the nano-lanthanum complex coated paper strip prototype showed qualitative on-site sensing for nitrofurantoin via naked eye color changes which can be detected anywhere. Moreover, a smart prototype for detecting macrofuran in the means of paper color change in the RGB color component extraction algorithm and the grayscale projection value processing algorithm was fabricated. The change in RGB color on the coated paper strip was detected using an electronic color sensor device. The developed colorimetric method, coated paper strip, and the electronic color sensor device prototype exhibited fast, simple, costless, and selective towards macrofuran over the competing analyzed. As well as, showed good applicability in the different real samples spiked with different concentrations of macrofuran.

Graphical abstract

Recent Progress in Metal-Organic Framework Based Fluorescent Sensors for Hazardous Materials Detection

Population growth and industrial development have exacerbated environmental pollution of both land and aquatic environments with toxic and harmful materials. Luminescence-based chemical sensors crafted for specific hazardous substances operate on host-guest interactions, leading to the detection of target molecules down to the nanomolar range. Particularly, the luminescence-based sensors constructed on the basis of metal-organic frameworks (MOFs) are of increasing interest, as they can not only compensate for the shortcomings of traditional detection techniques, but also can provide more sensitive detection for analytes. Recent years have seen MOFs-based fluorescent sensors show outstanding advantages in the field of hazardous substance identification and detection. Here, we critically discuss the application of MOFs for the detection of a broad scope of hazardous substances, including hazardous gases, heavy metal ions, radioactive ions, antibiotics, pesticides, nitro-explosives, and some harmful solvents as well as luminous and sensing mechanisms of MOF-based fluorescent sensors. The outlook and several crucial issues of this area are also discussed, with the expectation that it may help arouse widespread attention on exploring fluorescent MOFs (LMOFs) in potential sensing applications.