Formic acid dehydrogenation over PdNi alloys supported on N-doped carbon: synergistic effect of Pd-Ni alloying on hydrogen release

Ultrasmall Pd nanoparticles supported on a metal-organic framework DUT-67-PZDC for enhanced formic acid dehydrogenation

The highly dispersed ultrasmall palladium nanoparticles (Pd NPs) (1.7 nm) were successfully immobilized on a N-containing metal-organic framework (MOF, DUT-67-PZDC) using a co-reduction method, and it is used as an excellent catalyst for formic acid dehydrogenation (FAD). The optimized catalyst Pd/DUT-67-PZDC(10, 10 wt% Pd loading) shows 100% hydrogen (H2) selectivity and formic acid (FA) conversion at 60 °C, and the commendable initial turnover frequency (TOF) values of 2572 h-1 with the sodium formate (SF) as an additive and 1059 h-1 even without SF, which is better than most reported MOF supported Pd monometallic heterogeneous catalysts. The activation energy (Ea) of FAD is 43.2 KJ/mol, which is lower than most heterogeneous catalysts. In addition, the optimized catalyst Pd/DUT-67-PZDC(10) maintained good stability over five consecutive runs, demonstrating only minimal decline in catalytic activity. The outstanding catalytic performance could be ascribed to the synergistic corporations of the unique structure of DUT-67-PZDC carrier with hierarchical pore characteristic, the metal-support interaction (MSI) between the active Pd NPs and DUT-67-PZDC, the highly dispersed Pd NPs with ultrafine size serve as the catalytic active site, as well as the N sites on the support could act as the proton buffers. This work provides a new paradigm for the efficient H2 production of FAD by constructing highly active heterogeneous Pd-based catalysts using MOF supports.

H2 Production from Formic Acid Using Highly Stable Carbon-Supported Pd-Based Catalysts Derived from Soft-Biomass Residues: Effect of Heat Treatment and Functionalization of the Carbon Support

The production of hydrogen from liquid organic hydrogen carrier molecules stands up as a promising option over the conventional hydrogen storage methods. In this study, we explore the potential of formic acid as a convenient hydrogen carrier. For that, soft-biomass-derived carbon-supported Pd catalysts were synthesized by a H₃PO₄-assisted hydrothermal carbonization method. To assess the impact of the properties of the support in the catalytic performance towards the dehydrogenation of formic acid, three different strategies were employed: (i) incorporation of nitrogen functional groups; (ii) modification of the surface chemistry by performing a thermal treatment at high temperatures (i.e., 900 °C); and (iii) combination on both thermal treatment and nitrogen functionalization. It was observed that the modification of the carbon support with these strategies resulted in catalysts with enhanced performance and outstanding stability even after six consecutive reaction cycles, thus highlighting the important effect of tailoring the properties of the support.

Advances in Nonprecious Metal Homogeneously Catalyzed Formic Acid Dehydrogenation

Formic acid (FA) possesses a high volumetric concentration of H2 (53 g L−1). Moreover, it can be easily prepared, stored, and transported. Therefore, FA stands out as a potential liquid organic hydrogen carrier (LOHC), which allows storage and transportation of hydrogen in a safe way. The dehydrogenation to produce H2 and CO2 competes with its dehydration to give CO and H2O. For this reason, research on selective catalytic FA dehydrogenation has gained attention in recent years. Several examples of highly active homogenous catalysts based on precious metals effective for the selective dehydrogenation of FA have been reported. Among them are the binuclear iridium-bipyridine catalysts described by Fujita and Himeda et al. (TOF = 228,000 h−1) and the cationic species [IrClCp*(2,2′-bi-2-imidazoline)]Cl (TOF = 487,500 h−1). However, examples of catalytic systems effective for the solventless dehydrogenation of FA, which is of great interest since it allows to reduce the reaction volume and avoids the use of organic solvents that could damage the fuel cell, are scarce. In this context, the development of transition metal catalysts based on cheap and easily available nonprecious metals is a subject of great interest. This work contains a summary on the state of the art of catalytic dehydrogenation of FA in homogeneous phase, together with an account of the catalytic systems based on non-precious metals so far reported.

Nickel phthalocyanine@graphene oxide/TiO2 as an efficient degradation catalyst of formic acid toward hydrogen production

A new photocatalytic system was introduced to degrade formic acid toward hydrogen production using nickel(II) phthalocyanine (NiPc)@graphene oxide (GO)/TiO₂ as the catalyst. Synthesis of NiPc was performed in the presence of GO leading to a homogeneous distribution of NiPc on GO. While TiO₂ promoted the reaction using each of NiPc and GO under visible light, the reaction was carried out with superior rate using NiPc@GO/TiO₂. In this reaction, GO minimized the band gap of TiO₂ through contributing its Fermi levels and NiPc escalated the photocatalytic reaction rate as a sensitizing agent. The reaction released hydrogen with the rate of 1.38 mmol h⁻¹ and TOF = 77 h⁻¹.