In situ electrochemical Raman investigation of charge storage in rGO and N-doped rGO

The Effect of Sulfur and Nitrogen Doping on the Oxygen Reduction Performance of Graphene/Iron Oxide Electrocatalysts Prepared by Using Microwave-Assisted Synthesis

The synthesis of novel catalysts for the oxygen reduction reaction, by means of a fast one-pot microwave-assisted procedure, is reported herein and deeply explained. In particular, the important role of doping atoms, like sulfur and nitrogen, in Fe2O3-reduced graphene oxide nanocomposites is described to address the modification of catalytic performance. The presence of dopants is confirmed by X-ray Photoelectron Spectroscopy analysis, while the integration of iron oxide nanoparticles, by means of decoration of the graphene structure, is corroborated by electron microscopy, which also confirms that there is no damage to the graphene sheets induced by the synthesis procedure. The electrochemical characterizations put in evidence the synergistic catalysis effects of dopant atoms with Fe2O3 and, in particular, the importance of sulfur introduction into the graphene lattice. Catalytic performance of as-prepared materials toward oxygen reduction shows values close to the Pt/C reference material, commonly used for fuel cell and metal-air battery applications.

Urethral Microenvironment Adapted Sodium Alginate/Gelatin/Reduced Graphene Oxide Biomimetic Patch Improves Scarless Urethral Regeneration

The nasty urine microenvironment (UME) is an inherent obstacle that hinders urethral repair due to fibrosis and swelling of the oftentimes adopted hydrogel-based biomaterials. Here, using reduced graphene oxide (rGO) along with double-freeze-drying to strengthen a 3D-printed patch is reported to realize scarless urethral repair. The sodium alginate/gelatin/reduced graphene oxide (SA/Gel/rGO) biomaterial features tunable stiffness, degradation profile, and anti-fibrosis performance. Interestingly, the 3D-printed alginate-containing composite scaffold is able to respond to Ca2+ present in the urine, leading to enhanced structural stability and strength as well as inhibiting swelling. The investigations present that the swelling behaviors, mechanical properties, and anti-fibrosis efficacy of the SA/Gel/rGO patch can be modulated by varying the concentration of rGO. In particular, rGO in optimal concentration shows excellent cell viability, migration, and proliferation. In-depth mechanistic studies reveal that the activation of cell proliferation and angiogenesis-related proteins, along with inhibition of fibrosis-related gene expressions, play an important role in scarless repair by the 3D-printed SA/Gel/rGO patch via promoting urothelium growth, accelerating angiogenesis, and minimizing fibrosis in vivo. The proposed strategy has the potential of resolving the dilemma of necessary biomaterial stiffness and unwanted fibrosis in urethral repair.

Humidity Effect on Low-Temperature NH3 Sensing Behavior of In2O3/rGO Composites under UV Activation

The nature of the constituent components of composite materials can significantly affect the character of their interaction with the gas phase. In this work, nanocrystalline In₂O₃ was synthesized by the chemical precipitation method and was modified using reduced graphene oxide (rGO). The obtained composites were characterized by several analysis techniques-XRD, TEM, SEM, FTIR and Raman spectroscopy, XPS, TGA, and DRIFTS. The XPS and FTIR and Raman spectroscopy results suggested the formation of interfacial contact between In₂O₃ and rGO. The results of the gas sensor's properties showed that additional UV illumination led to a decrease in resistance and an increase in sensor response at room temperature. However, the presence of humidity at room temperature led to the disappearance of the response for pure In₂O₃, while for the composites, an inversion of the sensor response toward ammonia was observed. The main reason may have been the formation of NH₄NO₃ intermediates with further hydrolysis and decomposition under light illumination with the formation of nitrite and nitrate species. The presence of these species was verified by in situ DRIFT spectroscopy. Their strong electron-accepting properties lead to an increase in resistance, which possibly affected the sensor signal's inversion.

Biomass-Derived Hard Carbon with Interlayer Spacing Optimization toward Ultrastable Na-Ion Storage

Hard carbons as a kind of nongraphitized amorphous carbon have been recognized as potential anode materials for sodium-ion batteries (SIBs) due to its large interlayer spacing. However, the issues in terms of onerous synthetic procedure and elusive working mechanism remains critical bottlenecks for practical implement. Herein, we report a facile production of tubular hard carbon through direct carbonization of platanus flosses (FHC) for the first time. Through optimizing the pyrolysis temperatures, the FHC obtained at 1300 °C possesses a key balance between the interlayer spacing and surface area, which can maintain the substantial active sites as well as reduce the irreversible sodium storage. Accordingly, it can deliver a reversible capacity of 324.6 mAh g^-1 with a high initial Coulombic efficiency of 80%, superb rate property of 107.2 mAh g^-1 at 2 A g^-1, and long operating stability over 1000 cycles. Furthermore, the in situ Raman spectroscopic studies certify that sodium ions are stored in FHC following the "adsorption-insertion" mechanism. Our study could provide a promising route for large-scale development of the biomass-derived carbonaceous anodes for high-performance SIBs.

Tungsten Nanoparticles Accelerate Polysulfides Conversion: A Viable Route toward Stable Room-Temperature Sodium-Sulfur Batteries

Room-temperature sodium-sulfur (RT Na-S) batteries are arousing great interest in recent years. Their practical applications, however, are hindered by several intrinsic problems, such as the sluggish kinetic, shuttle effect, and the incomplete conversion of sodium polysulfides (NaPSs). Here a sulfur host material that is based on tungsten nanoparticles embedded in nitrogen-doped graphene is reported. The incorporation of tungsten nanoparticles significantly accelerates the polysulfides conversion (especially the reduction of Na₂ S₄ to Na₂ S, which contributes to 75% of the full capacity) and completely suppresses the shuttle effect, en route to a fully reversible reaction of NaPSs. With a host weight ratio of only 9.1% (about 3-6 times lower than that in recent reports), the cathode shows unprecedented electrochemical performances even at high sulfur mass loadings. The experimental findings, which are corroborated by the first-principles calculations, highlight the so far unexplored role of tungsten nanoparticles in sulfur hosts, thus pointing to a viable route toward stable Na-S batteries at room temperatures.