A switchable terahertz device combining ultra-wideband absorption and ultra-wideband complete reflection

Design and theoretical analysis of a tunable bifunctional metasurface absorber based on vanadium dioxide and photoconductive silicon

A tunable bifunctional metasurface absorber based on vanadium dioxide (VO2) and photoconductive silicon (PSi) is proposed in a terahertz (THz) band. When the conductivities of VO2 (σvo2) and PSi (σPSi) are 10 S m-1 and 1 × 105 S m-1, the designed absorber has a function of dual-broadband absorption. The absorptivity rate of over 90% is in the dual-broadband of 2.47-3.71 THz and 8.90-10.62 THz, corresponding to relative bandwidths (RBs) of 40.13% and 17.62%, respectively. When σvo2 and σPSi are equal to 2 × 105 S m-1 and 1 × 105 S m-1, the proposed design has a function of single-broadband absorption. More than 90% absorptivity is achieved in 4.69-7.72 THz (RB = 48.83%). Furthermore, the absorptivity under the dual- and single-broadbands is manipulated by changing σPSi. An impedance matching theory, equivalent transmission-line (TL) model and electric field distribution are used to reveal the tunable bifunctional absorption mechanism. The influences of structure parameters, polarization mode and incidence angle on the dual- and single-broadband absorption are investigated. The dual- and single-broadband absorption performances are maintained within the incident angles of 55° and 60°, which also possess polarization insensitivity. The proposed absorber has a potential application value in multifunctional devices such as modulation, sensing and electromagnetic (EM) stealth.

Multitasking Integrated Metasurface for Electromagnetic Wave Modulation with Reflection, Transmission, and Absorption

Accommodating multiple tasks within a tiny metasurface unit cell without them interfering with each other is a significant challenge. In this paper, an electromagnetic (EM) wave modulation metasurface capable of reflection, transmission, and absorption is proposed. This multitasking capability is achieved through a cleverly designed multi-layer structure comprising an EM Wave Shield Layer (ESL), a Polarization Modulation Layer (PML), and a Bottom Plate Layer (BPL). The functionality can be arbitrarily switched by embedding control materials within the structure. Depending on external excitation conditions, the proposed metasurface can realize reflection-type co-planar polarization to cross-polarization conversion, transmission-type electromagnetically induced transparency-like (EIT-like) modes, and broadband absorption. Notably, all tasks operate approximately within the same operating frequency band, and their performance can be regulated by the intensity of external excitation. Additionally, the operating principle of the metasurface is analyzed through impedance matching, an oscillator coupling model, and surface current distribution. This metasurface design offers a strategy for integrated devices with multiple functionalities.

All-Silicon Polarization-Insensitive Metamaterial Absorber in the Terahertz Range

All-silicon terahertz absorbers have attracted considerable interest. We present a design and numerical study of an all-silicon polarization-insensitive terahertz metamaterial absorber. The meta-atoms of the metamaterial absorber are square silicon rings which can be viewed as gratings. By properly optimizing the structure of the meta-atom, we achieve a broadband absorptivity that is above 90% ranging from 0.77 THz to 2.53 THz, with a relative bandwidth of 106.7%. Impedance matching reduces the reflection of the terahertz waves and the (0, ±1)-order diffraction induce the strong absorption. The absorption of this absorber is insensitive to the polarization of the terahertz wave and has a large incident angle tolerance of up to 60 degrees. The all-silicon metamaterial absorber proposed here provides an effective way to obtain broadband absorption in the terahertz regime. Metamaterial absorbers have outstanding applications in terahertz communication and imaging.

A Polarization-Insensitive, Vanadium Dioxide-Based Dynamically Tunable Multiband Terahertz Metamaterial Absorber

A tunable multiband terahertz metamaterial absorber, based on vanadium dioxide (VO2), is demonstrated. The absorber comprises a three-layer metal-insulator-metal (MIM) configuration with a split ring and slots of VO2 on the uppermost layer, a middle dielectric substrate based on silicon dioxide (SiO2), and a gold reflector on the back. The simulation results indicate that, when VO2 is in the metallic state, the proposed metamaterial exhibits nearly perfect absorption at six distinct frequencies. The design achieves an average absorption of 98.2%. The absorptivity of the metamaterial can be dynamically tuned from 4% to 100% by varying the temperature-controlled conductivity of VO2. The proposed metamaterial absorber exhibits the advantages of polarization insensitivity and maintains its absorption over 80% under different incident angle conditions. The underlying physical mechanism of absorption is explained through impedance matching theory, interference theory, and the distribution of electric fields. The ability to achieve multiband absorption with tunable characteristics makes the proposed absorber a promising candidate for applications in terahertz sensing, imaging, communication, and detection. The polarization insensitivity further enhances its practicality in various scenarios, allowing for versatile and reliable performance in terahertz systems.

A tri-functional, independently tunable terahertz absorber based on a vanadium dioxide-graphene hybrid structure

This paper proposes a simulated design for a versatile terahertz absorber that can be actively tuned. The absorber utilizes the unique tuning capabilities of graphene and vanadium dioxide, enabling it to alternate between ultra-broadband absorption, broadband absorption, and almost complete reflection. In the metallic phase of vanadium dioxide, coupled with a graphene Fermi level at 0 eV, the absorber achieves ultra-broadband absorption. This spans an extensive frequency range from 3.85 THz to 9.73 THz, exhibiting an absorption rate surpassing 90%. As we shift to the insulating phase of vanadium dioxide and adjust the graphene Fermi level to 1 eV, the absorber operates in a broadband absorption mode. This mode spans 2.98 THz to 4.63 THz, demonstrating an absorption rate exceeding 90%. In the insulating state of vanadium dioxide with a graphene Fermi level at 0 eV, the absorber metamorphoses into a nearly total reflector. Its maximum absorption rate is a mere 0.52%. The unique adjustability of vanadium dioxide and graphene independently enables the fine-tuning of absorption rates for both ultra-broadband and broadband absorption without encountering interference. Additionally, thanks to the central symmetry inherent in the proposed structure, the absorber exhibits insensitivity to alterations in polarization angles and remains stable under a broad range of incident angles. With these benefits, the absorber shows promising potential for applications in electromagnetic stealth, wireless communication, and so on.

Multipath-controlled bidirectional metasurface for multitasking polarization regulation and absorption

In the design of metasurfaces, integrating multiple tasks into a single small unit cell and achieving regulation through various paths pose a serious challenge. In this paper, a multipath-controlled bidirectional metasurface (MCBM) is designed to achieve polarization regulation, perfect absorption and total reflection as multitasking functions. The findings demonstrate that under different excitation conditions, when co-planar polarized terahertz (THz) waves are incident normally on the metasurface, the MCBM can convert co-planar polarization to cross-polarization, co-planar polarization to circular polarization wave in reflection mode, and co-planar polarization to cross-polarization in transmission, respectively. When co-planar polarized THz waves are incident from the back side of the metasurface, the tasks of MCBM change to broadband perfect absorption, total reflection, and transmission co-planar polarization to cross-polarization conversion. Remarkably, all operating frequency bands of these tasks are very approximate. Additionally, the multitasking functions can be switched by altering the excitation conditions, and their performance can be regulated through multipath controls, such as the temperature, voltage, and polarization status. Our design provides an effective strategy for multipath-controlled multitasking integrated devices in the THz band.

Metasurface inverse designed by deep learning for quasi-entire terahertz wave absorption

Ultra-broadband and efficient terahertz (THz) absorption is of paramount importance for the development of high-performance detectors. These detectors find applications in next-generation wireless communications, military radar systems, security detection, medical imaging, and various other domains. In this study, we present an ultra-wideband THz wave metasurface absorber (UTWMA) featuring a composite surface microstructure and a multilayer absorbing material (graphene). This UTWMA demonstrates remarkable capabilities by achieving highly efficient absorption levels, reaching 96.33%, within the 0.5-10 THz frequency range. To enhance the efficiency and precision of the design process, we have incorporated artificial neural networks, which enable rapid and accurate parameter selection. Moreover, we have conducted a comprehensive analysis of the absorption mechanism exhibited by the UTWMA at different frequencies. This analysis combines insights from the electric field distribution and effective medium theory. The findings presented in this paper are expected to catalyze further research in the domain of broadband THz technology, particularly in the context of metasurfaces and related fields. Additionally, this work paves the way for the development of compact, supercontinuous THz photovoltaic or photothermal electrical devices.

Broadband tunable terahertz metamaterial absorber having near-perfect absorbance modulation capability based on a patterned vanadium dioxide circular patch

A new tunable broadband terahertz metamaterial absorber has been designed based on patterned vanadium dioxide (V O 2). The absorber consists of three simple layers, the top V O 2 pattern layer, the middle media layer, and the bottom metal layer. Based on phase transition properties of V O 2, the designed device has excellent absorption modulation capability, achieving the functional transition from broadband absorption to near-perfect reflection. When V O 2 is in the metallic state, there are two absorption peaks observed at frequencies of 4.16 and 6.05 THz, exhibiting near-perfect absorption characteristics; the combination of these two absorption peaks gives rise to the broadband phenomenon and the absorption bandwidth, where the absorbance exceeds 90% and spans from 3.40 to 7.00 THz, with a corresponding relative absorption bandwidth of 69.23%. The impedance matching theory, near-field patterns, and surface current distributions are provided to analyze the causes of broadband absorption. Furthermore, the broadband absorption could be completely suppressed when V O 2 presents the dielectric phase, and its absorbance could be dynamically adjusted from 100% to less than 0.70%, thereby achieving near-perfect reflection. Owing to its symmetrical structure, it exhibits excellent performance in different polarization directions and at large incidence angles. Our proposed absorber may have a wide range of promising applications and can be applied in a variety of fields such as communications, imaging, sensing, and security detection.

Terahertz absorber based on vanadium dioxide with high sensitivity and switching capability between ultra-wideband and ultra-narrowband

The terahertz perfect absorber can be applied in the control, sensing and modulation of optical fields in micro- and nanostructures. However, they are only single function, complex device structure and low sensing sensitivity. Based on this, by introducing the bound state in the continuum (BIC) with infinite quality factor and field enhancement effect, and taking advantage of the phase transition characteristics of vanadium dioxide (VO2), we designed a terahertz perfect absorber device which can actively switch between ultra-wideband and ultra-narrowband. The absorption mechanism is explained by multipole analysis theory, impedance matching theory and electromagnetic field distribution. The broadband absorption is mainly due to the electric dipole resonance on metallic VO2 materials, and the absorption is more than 99% across 3.64-6.96 THz, and it has excellent characteristics such as robustness. Ultra-narrowband perfect absorption has a quality factor greater than 2200 due mainly to the implementation of symmetrically protected BIC with a sensing sensitivity of 2.575 THz per RIU. Therefore, this research could be widely used in the fields of integrated optical circuits, optoelectronic sensing and perceptual modulation of energy, as well as providing additional design ideas for the design of terahertz multifunctional devices.

Spin-dependent and tunable perfect absorption in a Fabry-Perot cavity containing a multi-Weyl semimetal

Spin-dependent absorption has been widely studied in metamaterials and metasurfaces with chirality since it develops significant applications in multiplexed holograms, photodection, and filtering. Here, the one-dimensional photonic crystal Fabry-Perot (FP) cavity containing a multi-Weyl semimetal (mWSM) defect is proposed to investigate the spin-dependent perfect absorption. Results denote that the distinct refractive indices of right hand circularly polarized (RCP) and left hand circularly polarized (LCP) waves are present due to the nonzero off-diagonal term of mWSM, thus supporting the perfect absorption of RCP and LCP waves at distinct resonant wavelengths. The different perfect absorption wavelengths of RCP and LCP waves reveal the spin-dependent perfect absorption. By altering the Fermi energy, tilt degree of Weyl cones, Weyl nodes separation, topological charge, and thickness of the mWSM layer, the perfect absorption wavelength of RCP and LCP waves can be regulated conveniently. Particularly, the linear tunable perfect absorption wavelength with thickness of the mWSM layer supports the accurate determination of perfect absorption wavelength at distinct mWSM thicknesses. Our studies develop simple and effective approaches to acquire the spin-dependent and adjustable perfect absorption without the external magnetic field, and can find practical applications in spin-dependent photonic devices.

A dual ultra-broadband switchable high-performance terahertz absorber based on hybrid graphene and vanadium dioxide

A tunable dual broadband switchable terahertz absorber based on vanadium dioxide and graphene is proposed. The tunability of graphene and the phase transition properties of vanadium dioxide are used to switch broadband absorption between low-frequency and high-frequency, as well as the absorption rate tuning function. The simulation results indicate that when vanadium dioxide is in the insulating phase and the graphene Fermi energy is 0.7 eV, the absorber achieves low-frequency broadband absorption within the range of 2.6-4.2 THz with an absorptance greater than 90%; when vanadium dioxide is in the metallic phase and the graphene Fermi energy is 0 eV, the absorber achieves high-frequency broadband absorption within the range of 4.9-10 THz with an absorptance greater than 90%. Furthermore, the absorptance can be tuned by adjusting the conductivity of vanadium dioxide or the Fermi energy of graphene. Due to the central symmetry of the proposed structure, the absorber is completely insensitive to polarization. For TE and TM polarized waves, both low and high-frequency broadband absorption are maintained over a range of incident angles from 0° to 50°. The simple structure, tunable absorption rate, insensitivity to polarization angle and incident angle properties are advantages of our proposed absorber. It has broad application prospects in adjustable filters and electromagnetic shielding.

Surface plasmon resonance sensor composed of a D-type photonic crystal fiber with a three-layer coating

A surface plasmon resonance sensor composed of photonic crystal fibers (PCF-SPR) with an A u-T i O 2-A u triple layer is designed for refractive index (RI) sensing and analyzed theoretically by the finite element method. The sensor exhibits enhanced resonance coupling between the core mode and surface plasmon polariton (SPP) mode as well as better sensitivity than the structure with a single gold coating. Furthermore, the A u-T i O 2-A u tri-layer structure narrows the linewidth of the loss spectrum and improves the figure of merit (FOM). In the analyte RI range of 1.30-1.42, the maximum wavelength sensitivity is 20,300 nm/RIU, resolution is 4.93×10-6, amplitude sensitivity is 6427R I U -1, and FOM is 559R I U -1. The results provide insights into the design of high-performance PCF-SPR sensors.

Ultrasensitive optical modulation in hybrid metal-perovskite and metal-graphene metasurface THz devices

Implementation of efficient terahertz (THz) wave control is essential for THz technology development for applications including sixth-generation communications and THz sensing. Therefore, realization of tunable THz devices with large-scale intensity modulation capabilities is highly desirable. By integrating perovskite and graphene with a metallic asymmetric metasurface, two ultrasensitive devices for dynamic THz wave manipulation through low-power optical excitation are demonstrated experimentally here. The perovskite-based hybrid metadevice offers ultrasensitive modulation with a maximum modulation depth for the transmission amplitude reaching 190.2% at the low optical pump power of 5.90 mW/cm². Additionally, a maximum modulation depth of 227.11% is achieved in the graphene-based hybrid metadevice at a power density of 18.87 mW/cm². This work paves the way toward design and development of ultrasensitive devices for optical modulation of THz waves.

Ultra-Broadband Solar Absorber and High-Efficiency Thermal Emitter from UV to Mid-Infrared Spectrum

Solar energy is currently a very popular energy source because it is both clean and renewable. As a result, one of the main areas of research now is the investigation of solar absorbers with broad spectrum and high absorption efficiency. In this study, we create an absorber by superimposing three periodic Ti-Al₂O₃-Ti discs on a W-Ti-Al₂O₃ composite film structure. We evaluated the incident angle, structural components, and electromagnetic field distribution using the finite difference in time domain (FDTD) method in order to investigate the physical process by which the model achieves broadband absorption. We find that distinct wavelengths of tuned or resonant absorption may be produced by the Ti disk array and Al₂O₃ through near-field coupling, cavity-mode coupling, and plasmon resonance, all of which can effectively widen the absorption bandwidth. The findings indicate that the solar absorber's average absorption efficiency can range from 95.8% to 96% over the entire band range of 200 to 3100 nm, with the absorption bandwidth of 2811 nm (244-3055 nm) having the highest absorption rate. Additionally, the absorber only contains tungsten (W), titanium (Ti), and alumina (Al₂O₃), three materials with high melting points, which offers a strong assurance for the absorber's thermal stability. It also has a very high thermal radiation intensity, reaching a high radiation efficiency of 94.4% at 1000 K, and a weighted average absorption efficiency of 98.3% at AM1.5. Additionally, the incidence angle insensitivity of our suggested solar absorber is good (0-60°) and polarization independence is good (0-90°). These benefits enable a wide range of solar thermal photovoltaic applications for our absorber and offer numerous design options for the ideal absorber.

Triple-Band Surface Plasmon Resonance Metamaterial Absorber Based on Open-Ended Prohibited Sign Type Monolayer Graphene

This paper introduces a novel metamaterial absorber based on surface plasmon resonance (SPR). The absorber is capable of triple-mode perfect absorption, polarization independence, incident angle insensitivity, tunability, high sensitivity, and a high figure of merit (FOM). The structure of the absorber consists of a sandwiched stack: a top layer of single-layer graphene array with an open-ended prohibited sign type (OPST) pattern, a middle layer of thicker SiO₂, and a bottom layer of the gold metal mirror (Au). The simulation of COMSOL software suggests it achieves perfect absorption at frequencies of f_I = 4.04 THz, f_II = 6.76 THz, and f_III = 9.40 THz, with absorption peaks of 99.404%, 99.353%, and 99.146%, respectively. These three resonant frequencies and corresponding absorption rates can be regulated by controlling the patterned graphene's geometric parameters or just adjusting the Fermi level (E_F). Additionally, when the incident angle changes between 0~50°, the absorption peaks still reach 99% regardless of the kind of polarization. Finally, to test its refractive index sensing performance, this paper calculates the results of the structure under different environments which demonstrate maximum sensitivities in three modes: S_I = 0.875 THz/RIU, S_II = 1.250 THz/RIU, and S_III = 2.000 THz/RIU. The FOM can reach FOM_I = 3.74 RIU^-1, FOM_II = 6.08 RIU^-1, and FOM_III = 9.58 RIU^-1. In conclusion, we provide a new approach for designing a tunable multi-band SPR metamaterial absorber with potential applications in photodetectors, active optoelectronic devices, and chemical sensors.

Impact of the uniaxial strain on terahertz modulation characteristics in flexible epitaxial VO2 film across the phase transition

Exploring flexible electronics is on the verge of innovative breakthroughs in terahertz (THz) communication technology. Vanadium dioxide (VO₂) with insulator-metal transition (IMT) has excellent application potential in various THz smart devices, but the associated THz modulation properties in the flexible state have rarely been reported. Herein, we deposited an epitaxial VO₂ film on a flexible mica substrate via pulsed-laser deposition and investigated its THz modulation properties under different uniaxial strains across the phase transition. It was observed that the THz modulation depth increases under compressive strain and decreases under tensile strain. Moreover, the phase-transition threshold depends on the uniaxial strain. Particularly, the rate of the phase transition temperature depends on the uniaxial strain and reaches approximately 6 °C/% in the temperature-induced phase transition. The optical trigger threshold in laser-induced phase transition decreased by 38.9% under compressive strain but increased by 36.7% under tensile strain, compared to the initial state without uniaxial strain. These findings demonstrate the uniaxial strain-induced low-power triggered THz modulation and provide new insights for applying phase transition oxide films in THz flexible electronics.

High confidence plasmonic sensor based on photonic crystal fibers with a U-shaped detection channel

In order to improve the performance of optical fiber sensing and expand its application, a photonic crystal fiber (PCF) plasmonic sensor with a U-shaped channel based on surface plasmon resonance (SPR) is proposed. We have studied the general influence rules of structural parameters such as the radius of the air hole, the thickness of the gold film and the number of U-shaped channels using COMSOL based on the finite element method. The dispersion curves and loss spectrum of the surface plasmon polariton (SPP) mode and the Y-polarization (Y-pol) mode as well as the distribution of the electric field intensity (normE) under various conditions are studied using the coupled mode theory. The maximum refractive index (RI) sensitivity achieved in the RI range of 1.38-1.43 is 24.1 μm RIU^-1, which corresponds to a full width at half maximum (FWHM) of 10.0 nm, a figure of merit (FOM) of 2410 RIU^-1 and a resolution of 4.15 × 10^-6 RIU. The results show that the proposed sensor combines the SPR effect, which is extremely sensitive to changes in the RI of the surrounding medium and realizes real-time detection of the external environment by analyzing the light signal modulated by the sensor. In addition, the detection range and sensitivity can be extended by adjusting the structural parameters. The proposed sensor has a simple structure with excellent sensing performance, which provides a new idea and implementation method for real-time detection, long-range measurement, complex environment monitoring and highly integrated sensing, and has a strong potential practical value.

Tunable broadband absorber based on a layered resonant structure with a Dirac semimetal

With the development of science and technology, intermediate infrared technology has gained more and more attention in recent years. In the research described in this paper, a tunable broadband absorber based on a Dirac semimetal with a layered resonant structure was designed, which could achieve high absorption (more than 0.9) of about 8.7 THz in the frequency range of 18-28 THz. It was confirmed that the high absorption of the absorber comes from the strong resonance absorption between the layers, and the resonance of the localised surface plasmon. The absorber has a gold substrate, which is composed of three layers of Dirac semimetal and three layers of optical crystal plates. In addition, the resonance frequency of the absorber can be changed by adjusting the Fermi energy of the Dirac semimetal. The absorber also shows excellent characteristics such as tunability, absorption stability at different polarisation waves and incident angles, and has a high application value for use in radar countermeasures, biotechnology and other fields.

Polarization-sensitive multi-frequency switches and high-performance slow light based on quadruple plasmon-induced transparency in a patterned graphene-based terahertz metamaterial

A periodic patterned graphene-based terahertz metamaterial comprising three transverse graphene strips and one longitudinal continuous graphene ribbon is proposed to achieve a dynamically tunable quadruple plasmon-induced transparency (PIT) effect. Further analysis of the magnetic field distribution along the x-direction shows that the quadruple-PIT window can be produced by the strong destructive interference between the bright mode and the dark mode. The spectral response characteristics of the quadruple-PIT effect are numerically and theoretically investigated, and the results obtained by the finite-difference time-domain (FDTD) simulation fit well with that by the coupled mode theory (CMT) calculation. In addition, two hepta-frequency asynchronous switches are achieved by tuning the Fermi energy of the graphene, and their maximum modulation depths are 98.9% and 99.7%, corresponding to the insertion losses of 0.173 dB and 0.334 dB, respectively. Further studies show that polarization light has a significant impact on the quadruple-PIT, resulting in a polarization-sensitive switch being realized with a maximum modulation depth of 99.7% and a minimum insertion loss of 0.048 dB. In addition, when the Fermi energy is equal to 1.2 eV, the maximum time delay and group refractive index of the quadruple-PIT can be respectively as high as 1.065 ps and 3194, and the maximum delay-bandwidth product reaches 1.098, which means that excellent optical storage is achieved. Thus, our proposed quadruple-PIT system can be used to design a terahertz multi-channel switch and optical storage.

Nanocellulose-Linked MXene/Polyaniline Aerogel Films for Flexible Supercapacitors

In the development of energy supply systems for smart wearable devices, supercapacitors stand out owing to their ability of quick and efficient energy supply. However, their application is limited due to their low energy density and poor mechanical energy. Herein, a strategy for the preparation of flexible supercapacitors is reported, which is based on the fabrication of aerogel films by simultaneously utilising cellulose nanofiber (CNFs) as an MXene intercalation material and polyaniline (PANI) as a template material. CNFs, which can form hydrogen-bonded networks, enhance the mechanical properties of MXene from 44.25 to 119.56 MPa, and the high electron transport properties of PANI endow MXene with a capacitance of 327 F g^-1 and a resistance of 0.23 Ω. Furthermore, the combination of CNFs and PANI enables a 71.6% capacitance retention after 3000 charge/discharge and 500 folding cycles. This work provides a new platform for the development of flexible supercapacitors.

Tunable high-sensitivity sensing detector based on Bulk Dirac semimetal

This paper proposes a tunable sensing detector based on Bulk Dirac semimetals (BDS). The bottom-middle-top structure of the detector is a metal-dielectric-Dirac semimetal. The designed detector is simulated in the frequency domain by the finite element method (FEM). And the simulation results indicate that the detector achieves three perfect absorption peaks with absorptivity greater than 99.8% in the range of 2.4-5.2 THz. We analyze the cause of the absorption peak by using random phase approximation theory. The device exhibits good angular insensitivity in different incident angle ranges, and the three absorption peaks can reach 90% absorption rate when the incident angle is in the ranges of 0-60°. And when adjusting the Fermi level of BDS in the ranges of 0.1-0.5 eV, our detector can realize the frequency regulation of the ultra-wide range of 3.90-4.56 THz and realize multi-frequency controllable sensing while maintain the absorption efficiency above 96%. The detector has maximum sensitivity S of 238.0 GHz per RIU when the external environment of the refractive index changes from 1.0 to 1.8, and the maximum detection accuracy is 6.5. The device has broad development prospects in the field of space detection and high-sensitivity biosensing detection.

Modulation of graphene THz absorption based on HAuCl4 doping method

Graphene is an attractive material for terahertz (THz) absorbers because of its tunable Fermi-Level (E_F). It has become a research hotspot to modulate the E_F of graphene and THz absorption of graphene. Here, a sandwich-structured single layer graphene (SLG)/ Polyimide (PI)/Au THz absorber was proposed, and top-layer graphene was doped by HAuCl₄ solutions. The E_F of graphene was shifted by HAuCl₄ doping, which was characterized by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and Raman tests. The results showed that the E_F is shifted about 0.42 eV under 100 mM HAuCl₄ doping, the sheet resistance is reduced from 1065 Ω/sq (undoped) to 375 Ω/sq (100 mM). The corresponding absorbance was increased from 40% to 80% at 0.65 THz and increased from 50% to 90% at 2.0 THz under 100 mM HAuCl₄ doping. Detailed studies showed that the absorption came from a sandwich structure that meets the impedance matching requirements and provided a thin resonant cavity to capture the incident THz waves. In addition, not only the absorber can be prepared simply, but its results in experiments and simulations agree as well. The proposed device can be applied to electromagnetic shielding and imaging, and the proposed method can be applied to prepare other graphene-based devices.

Highly sensitive sensing of a magnetic field and temperature based on two open ring channels SPR-PCF

A surface plasmon resonance (SPR) sensor comprising photonic crystal fiber (PCF) is designed for magnetic field and temperature dual-parameter sensing. In order to make the SPR detection of magnetic field and temperature effectively, the two open ring channels of the proposed sensor are coated with gold and silver layers and filled with magnetic fluid (MF) and Polydimethylsiloxane (PDMS), respectively. The sensor is analyzed by the finite element method and its mode characteristics, structure parameters and sensing performance are investigated. The analysis reveals when the magnetic field is a range of 40-310 Oe and the temperature is a range of 0-60 °C, the maximum magnetic field sensitivity is 308.3 pm/Oe and temperature sensitivity is 6520 pm/°C. Furthermore, temperature and magnetic field do not crosstalk with each other's SPR peak. Its refractive index sensing performance is also investigated, the maximum sensitivity and FOM of the left channel sensing are 16820 nm/RIU and 1605 RIU^-1, that of the right channel sensing are 13320 nm/RIU and 2277 RIU^-1. Because of its high sensitivity and special sensing performance, the proposed sensor will have potential application in solving the problems of cross-sensitivity and demodulation due to nonlinear changes in sensitivity of dual-parameter sensing.

An Infrared Ultra-Broadband Absorber Based on MIM Structure

We designed an infrared ultra-broadband metal-insulator-metal (MIM)-based absorber which is composed of a top layer with four different chromium (Cr) nano-rings, an intermediate media of aluminum trioxide (Al₂O₃), and a bottom layer of tungsten (W). By using the finite-difference time-domain (FDTD), the absorption performance of the absorber was studied theoretically. The results indicate that the average absorption of the absorber can reach 94.84% in the wavelength range of 800-3000 nm. The analysis of the electric and magnetic field indicates that the ultra-broadband absorption rate results from the effect of local surface plasmon resonance (LSPR). After that, the effect of structural parameters, metal and dielectric materials on the absorptivity of the absorber was also discussed. Finally, the effect of incidence angle on absorption was investigated. It was found that it is not sensitive to incidence angle; even when incidence angle is 30°, average absorptivity can reach 90%. The absorber is easy to manufacture and simple in structure, and can be applied in infrared detection and optical imaging.

Field Enhancement for the Composite MXene/Black Phosphorus-Based Metasurface

Both MXene and black phosphorus (BP), which actg as hot two-dimensional (2D) materials, have unique optical properties and important applications for nano-micro optical devices. Here, a composite MXene/BP-based metasurface, consisting of Ti₃C₂T_x and BP layers, is proposed for investigating the optical responses and electric field by using the finite-difference time-domain numerical simulation method in the microwave band. The research results show that the Fano resonance-like spectra can be observed when the coupling of surface plasmons (SPs) on the BP and MXene layers appears. Furthermore, the field enhancement, based on the Fano resonance-like optical responses, can be improved by an order of magnitude through adjusting the structural parameters and the polarization direction of incident light for the proposed metasurface. The findings may provide important theoretical insights into the design and realization of high-performance plasmonic devices.

A Novel Bio-Inspired Ag/3D-TiO2/Si SERS Substrate with Ordered Moth-like Structure

This paper reports a novel method to fabricate a bio-inspired SERS substrate with low reflectivity, ultra-sensitivity, excellent uniformity, and recyclability. First, double layers of polystyrene spheres with different particle sizes were assembled on the surface of a silicon wafer to act as a moth-like template. Second, through the template sacrifice method, the TiO₂ film with a three-dimensional moth-like eye structure was induced by the double-layer polystyrene spheres in the previous step, and its microscopic morphology showed a high degree of order. Finally, Ag nanoparticles were assembled on the TiO₂ film to form a bio-inspired SERS substrate. This ordered bio-inspired structure can not only reduce reflection, but also reinforce the uniformity of hotspot density, which helps to improve the sensitivity and uniformity of the Raman signal. This bio-inspired SERS substrate can detect R6G molecules at a concentration as low as 1.0 × 10^-10 mol/L, and its enhancement factor (EF) can reach 6.56 × 10⁶. In addition, the composite of Ag and TiO₂ can realize the photocatalytic degradation of R6G and then realize the recyclability of the SERS substrate.

Double Narrowband Induced Perfect Absorption Photonic Sensor Based on Graphene-Dielectric-Gold Hybrid Metamaterial

Double narrowband induced perfect absorption in the terahertz region is achieved in a graphene-dielectric-gold hybrid metamaterial, whose physical mechanism is analyzed using the coupled-mode theory (CMT), which agreed well with the finite-difference time-domain (FDTD) simulation. This study found that the Fermi level of graphene can be adjusted to improve the absorptivity when the refractive index (RI) n_d of the chosen dielectric cannot achieve a good absorption effect. In addition, the blue shift of absorption spectrum can be used in the design of dual-frequency electro-optical switches, of which the modulation degree of amplitude (MDA) can reach as high as 94.05% and 93.41%, indicating that this is a very promising electro-optical switch. Most significantly, the RI sensing performance is investigated, which shows an ultra-high absorption sensitivity S_A = 4.4°/RIU, wavelength sensitivity S_λ = 9.8°/RIU, and phase shift sensitivity S_φ = 2691°/RIU. At last, an interesting finding is that the two peaks (R1 and R2) of plasmon-induced absorption (PIA) show different polarization characteristics (insensitive or sensitive) to the incident light angle; this polarization-sensitive is particularly important for the PIT/PIA-based optical polarizers. Undoubtedly, this paper is of great significance to the research and design of terahertz photonic devices and sensors.

Reverse design of metamaterial absorbers based on an equivalent circuit

We present a reverse design method useful for designing and analyzing metamaterial absorbers; we demonstrate its power by designing both a narrowband absorber and a wideband absorber. The method determines the structure of the absorber using an equivalent-circuit model. The narrowband metamaterial absorber structures were based on the equivalent-circuit model, and the narrowband metamaterial absorber designed using the method has an absorption fraction greater than 90% in a bandwidth of 500 nm centered at about 1450 nm. In order to extend the absorption bandwidth for the absorber, the narrowband absorber structure is adjusted based on the equivalent-circuit model, and the broadband metamaterial absorber structure is investigated. The numerical results show that the absorption bandwidth is substantially increased; the absorbance is greater than 90% for a band nearly reaching the limits of our experiment, from about 400 nm (near-ultraviolet) to about 2800 nm (deep infrared). The absorption spectrum of the wideband absorber is more sensitive to the angle of incident polarization due to the asymmetric structure, but the whole band shows polarization independence. For a large angle of 60° (TM polarization) oblique incidence, the average absorption of the broadband metamaterial absorber reaches 81%. The physical mechanism of the wideband high absorption is analyzed, which is mainly caused by Fabry-Perot resonance, surface plasmon resonance, local surface plasmon resonance, and the hybrid coupling among them. Our proposed design with high-broadband absorption has significant potential for thermoelectric and thermal emitters, solar thermal energy harvesting, and invisible device applications.

Dynamically tunable bound states in the continuum supported by asymmetric Fabry-Pérot resonance

The dynamic regulation of quasi-bound states in the continuum (quasi-BIC) is a research hotspot, such as incident angle, polarization angle, temperature, a medium refractive index, and medium position regulation. In this paper, a dual-band ultra-high absorber composed of upper asymmetric graphene strips and lower graphene nanoribbons can generate a symmetry-protected quasi-BIC and Fabry-Pérot resonance (FPR) mode. The band structure further demonstrates the symmetry-protected BIC. Research shows that the absorption system can withstand a relatively wide range of incidence and polarization angles. Interestingly, the quasi-BIC and FPR modes can be modulated by the Fermi levels of the graphene1 and graphene2, respectively, realizing a multifunctional switch with high modulation depth (MD > 94%), low insertion loss (IL < 0.23 dB), and large dephasing time (DT > 4.35 ps). This work provides a new approach for the dynamic regulation of quasi-BIC and stimulates the development of multifunctional switches in the absorber.

Two-channel photonic crystal fiber based on surface plasmon resonance for magnetic field and temperature dual-parameter sensing

In this paper, a dual-parameter sensor based on surface plasmon resonance (SPR)-photonic crystal fiber (PCF) is proposed, which can be applied in detecting the magnetic field and temperature. In this sensor, two elliptical channels are designed on both sides of the fiber core. The left channel (Ch 1) is coated with gold film and filled with magnetic fluid (MF) to achieve a response to the magnetic field and temperature using SPR. The right channel (Ch 2) is coated with gold film as well as Ta₂O₅ film to improve the SPR sensing performance. Finally, Ch 2 is filled with polydimethylsiloxane (PDMS) to achieve a response to the temperature. The mode characteristics, structural parameters and sensing performance are investigated by the finite element method. The results show that when the magnetic field is in the range of 50-130 Oe, the magnetic field sensitivities of Ch 1 and Ch 2 are 65 pm Oe^-1 and 0 pm Oe^-1, respectively. When the temperature is in the range of 17.5-27.5 °C, the temperature sensitivities of Ch 1 and Ch 2 are 520 pm °C^-1 and 2360 pm °C^-1, respectively. By establishing and demodulating a sensing matrix, the sensor can not only measure the temperature and magnetic field simultaneously but also solve the temperature cross-sensitivity problem. In addition, when the temperature exceeds a certain value, the proposed sensor is expected to achieve dual-parameter sensing without a matrix. The proposed dual-parameter SPR-PCF sensor has a unique structure and excellent sensing performance, which are important for the simultaneous sensing of multiple basic physical parameters.

Design of Ultra-Narrow Band Graphene Refractive Index Sensor

The paper proposes an ultra-narrow band graphene refractive index sensor, consisting of a patterned graphene layer on the top, a dielectric layer of SiO₂ in the middle, and a bottom Au layer. The absorption sensor achieves the absorption efficiency of 99.41% and 99.22% at 5.664 THz and 8.062 THz, with the absorption bandwidths 0.0171 THz and 0.0152 THz, respectively. Compared with noble metal absorbers, our graphene absorber can achieve tunability by adjusting the Fermi level and relaxation time of the graphene layer with the geometry of the absorber unchanged, which greatly saves the manufacturing cost. The results show that the sensor has the properties of polarization-independence and large-angle insensitivity due to the symmetric structure. In addition, the practical application of testing the content of hemoglobin biomolecules was conducted, the frequency of first resonance mode shows a shift of 0.017 THz, and the second resonance mode has a shift of 0.016 THz, demonstrating the good frequency sensitivity of our sensor. The S (sensitivities) of the sensor were calculated at 875 GHz/RIU and 775 GHz/RIU, and quality factors FOM (Figure of Merit) are 26.51 and 18.90, respectively; and the minimum limit of detection is 0.04. By comparing with previous similar sensors, our sensor has better sensing performance, which can be applied to photon detection in the terahertz band, biochemical sensing, and other fields.

Realization of Multifunctional Metamaterial Structure Based on the Combination of Vanadium Dioxide and Graphene

Combining tunable properties and various functionalities into a single metamaterial structure has become a novel research hotspot and can be used to tackle great challenges. The multifunctional metamaterial structure that combines absorption, linear-to-circular (LTC) polarization conversion, filtering and switching functions into a single metamaterial device was designed and investigated in this study. The switching of different functions can be achieved based on the phase transition of vanadium dioxide (VO2) and change of graphene chemical potential. When VO2 is in a metal state, the multi-frequency absorption and LTC polarization conversion can be achieved with different chemical potentials. When VO2 is in the insulator state and the polarization angle of incident wave is 45°, the device can be used to select or isolate the incident waves with different polarization states in the frequency region of 1.2-1.8 THz. Furthermore, when the chemical potentials are 0.05 eV and 1.2 eV, the corresponding transmissions of the TE-polarized wave demonstrate the opposite results, realizing the switching functions in the frequency region of 0.88-1.34 THz. In the frequency region above 2 THz, the multi-frequency rejection filter can be achieved. The designed switchable multifunctional metamaterial device can be widely implemented in radar monitoring and communication systems.

Ultrawideband Polarization-Independent Nanoarchitectonics: A Perfect Metamaterial Absorber for Visible and Infrared Optical Window Applications

This article presents numerical analysis of an ultrathin concentric hexagonal ring resonator (CHRR) metamaterial absorber (MMA) for ultrawideband visible and infrared optical window applications. The proposed MMA exhibits an absorption of above 90% from 380 to 2500 nm and an average absorbance of 96.64% at entire operational bandwidth with a compact unit cell size of 66 × 66 nm². The designed MMA shows maximum absorption of 99% at 618 nm. The absorption bandwidth of the MMA covers the entire visible and infrared optical windows. The nickel material has been used to design the top and bottom layer of MMA, where aluminium nitride (AlN) has been used as the substrate. The designed hexagonal MMA shows polarization-independent properties due to the symmetry of the design and a stable absorption label is also achieved for oblique incident angles up to 70 °C. The absorption property of hexagonal ring resonator MMA has been analyzed by design evaluation, parametric and various material investigations. The metamaterial property, surface current allocation, magnetic field and electric field have also been analyzed to explore the absorption properties. The proposed MMA has promising prospects in numerous applications like infrared detection, solar cells, gas detection sensors, imaging, etc.

Design of photonic crystal fiber to excite surface plasmon resonance for highly sensitive magnetic field sensing

To improve the sensing performance of optical fiber magnetic field sensor based on magneto-refractive effect, a D-shaped photonic crystal fiber-surface plasmon resonance (PCF-SPR) sensor based on magneto-refractive effect is proposed and its magnetic field sensing characteristics are investigated. The designed D-shaped PCF has a core-analyte-gold structure. Within the D-shaped PCF, the side polishing surface is coated with the gold film and the special hole is sandwiched between the core and the gold film. To realize the high magnetic field sensitivity for the fiber SPR magnetic field sensor, the special hole is filled with magnetic fluid (MF). In this paper, we analyze the mode transmission characteristics and magnetic field sensing characteristics of this fiber sensor by finite element method. We also obtain a general rule for the optimization of PCF-SPR sensors by analyzing the dispersion curves, the energy of the surface plasmon polariton mode and the core mode on the sensing performance of the designed fiber sensor. The maximum refractive index sensitivity and magnetic field sensitivity of the optimized fiber are 59714.3 nm/RIU and 21750 pm/mT (50-130 Oe), respectively. Compared with optical fiber magnetic field sensors based on magneto-refractive effect reported previously, the magnetic field sensitivity in this paper is nearly two orders of magnitude higher and it can initially achieve nT magnitude magnetic field resolution and testing capability. The proposed fiber sensor has the advantages of simple structure, easy production, high sensitivity, and strong environmental adaptability. It not only improves the sensing performance of optical fiber magnetic field sensors, but also provides an ideal alternative platform for biosensors like microfluidics because of its high refractive index sensitivity and the special structure.

High-Q refractive index sensors based on all-dielectric metasurfaces

Possessing fantastic abilities to freely manipulate electromagnetic waves on an ultrathin platform, metasurfaces have aroused intense interest in the academic circle. In this work, we present a high-sensitivity refractive index sensor excited by the guided mode of a two-dimensional periodic TiO2 dielectric grating structure. Numerical simulation results show that the optimized nanosensor can excite guided-mode resonance with an ultra-narrow linewidth of 0.19 nm. When the thickness of the biological layer is 20 nm, the sensitivity, Q factor, and FOM values of the nanosensor can reach 82.29 nm RIU-1, 3207.9, and 433.1, respectively. In addition, the device shows insensitivity to polarization and good tolerance to the angle of incident light. This demonstrates that the utilization of low-loss all-dielectric metasurfaces is an effective way to achieve ultra-sensitive biosensor detection.

Frequency Scanning Dual-Mode Asymmetric Dual-OAM-Wave Generation Base on Broadband PB Metasurface

Increasing information capacity is significant for high-speed communication systems in a congested radio frequency sequence. Vortex waves carrying mode orthogonal orbital angular momentum (OAM) have gained considerable attention in recent years, owing to their multiplexing quality. In this study, a broadband Pancharatnam-Berry (PB) metasurface element with a simple structure is proposed, which exhibits an efficient reflection of the co-polarized component and a full 2π phase variation in 10.5-21.5 GHz under circularly polarized wave incidence. By convolution and addition operations, the elaborate phase distribution is arranged and the corresponding metasurface-reflecting dual-mode asymmetric dual-OAM waves is constructed. Under continuous control of the working frequency, the OAM vortex beams with the topological charges 1 and -1 are steered to scan within the angle range of 11.9°-24.9° and 17.9°-39.1° at φ = 315° and 135° planes, respectively. The simulation and measurement results verified the feasibility of generating frequency-controlled asymmetric dual beams and the validity of dual-mode OAM characteristics, both in the near and far fields. This design approach has considerable potential in OAM wave multiplexing and wireless communication system transmission.

Perfect Absorption of Fan-Shaped Graphene Absorbers with Good Adjustability in the Mid-Infrared

This paper presents a graphene metamaterial absorber based on impedance matching. A finite difference in time domain (FDTD) method is used to achieve a theoretically perfect absorption in the mid-infrared band. A basis is created for the multiband stable high absorption of graphene in the mid-infrared. The designed graphene absorber is composed of graphene, a dielectric layer, a gold plane, and a silicon substrate, separately. The incident source of mid-infrared can be utilized to stimulate multiband resonance absorption peaks from 2.55 to 4.15 μm. The simulation results show that the absorber has three perfect resonance peaks exceeding 99% at λ1 = 2.67 μm, λ2 = 2.87 μm, and λ3 = 3.68 μm, which achieve an absorption efficiency of 99.67%, 99.61%, and 99.40%, respectively. Furthermore, the absorber maintains an excellent performance with a wide incident angle range of 0°–45°, and it also keeps the insensitive characteristic to transverse electric wave (TE) and transverse magnetic wave (TM). The results above indicate that our perfect graphene absorber, with its tunability and wide adaptability, has many potential applications in the fields of biosensing, photodetection, and photocell.

Metamaterial Solar Absorber Based on Refractory Metal Titanium and Its Compound

Metamaterials refers to a class of artificial materials with special properties. Through its unique geometry and the small size of each unit, the material can acquire unique electromagnetic field properties that conventional materials do not have. Based on these factors, we put forward a kind of high absorption near-ultraviolet to near-infrared electromagnetic wave absorber of the solar energy. The surface structure of the designed absorber is composed of TiN-TiO2-Al2O3 with rectangles and disks, and the substrate is Ti-Al2O3-Ti layer. In the study band range (0.1–3.0 μm), the solar absorber’s average absorption is up to 96.32%, and the designed absorber absorbs more than 90% of the electromagnetic wave with a wavelength width of 2.577 μm (0.413–2.990 μm). Meanwhile, the designed solar absorber has good performance under different angles of oblique incident light. Ultra-wideband solar absorbers have great potential in light absorption related applicaitions because of their wide spectrum high absorption properites.

Active and Smart Terahertz Electro-Optic Modulator Based on VO2 Structure

Modulating terahertz (THz) waves actively and smartly through an external field is highly desired in the development of THz spectroscopic devices. Here, we demonstrate an active and smart electro-optic THz modulator based on a strongly correlated electron oxide vanadium dioxide (VO2). With milliampere current excitation on the VO2 thin film, the transmission, reflection, absorption, and phase of THz waves can be modulated efficiently. In particular, the antireflection condition can be actively achieved and the modulation depth reaches 99.9%, accompanied by a 180° phase switching. Repeated and current scanning experiments confirm the high stability and multibit modulation of this electro-optic modulation. Most strikingly, by utilizing a feedback loop of "THz-electro-THz" geometry, a smart electro-optic THz control is realized. For instance, the antireflection condition can be stabilized precisely no matter what the initial condition is and how the external environment changes. The proposed electro-optic THz modulation method, taking advantage of strongly correlated electron material, opens up avenues for the realization of THz smart devices.

Near-perfect spectrally-selective metasurface solar absorber based on tungsten octagonal prism array

Solar selective absorbers influence the photothermal efficiency of high-temperature solar thermal applications directly and significantly. In present work, a metasurface absorber consisting of an octagonal prism array is proposed, optimized and analyzed. Firstly, the structure parameters of the absorber are optimized, finding the optimal absorber achieves near-perfect spectrally-selectivity compared with the perfect solar absorber. The high solar absorptivity of 0.9591, low emissivity of 0.1594-0.3694, and high photothermal efficiency of 94.72-83.10% are achieved at 1073-1573 K and 1000 suns. Then, the mechanisms leading to the excellent spectral selectivity are investigated, suggesting that the coupling effects of multi-plasmon resonance modes and the impedance matching lead to the high solar absorptivity. Meanwhile, the impedance mismatching is the mechanism to minimize the emissivity in the mid-IR region. Moreover, whether the spectral absorptivity can be changed by structural parameters is investigated, suggesting that the excircle diameter of the first tungsten octagonal prism and the height of SiO2 under the octagonal prism can influence the spectral absorptivity obviously. Finally, the metasurface absorber is demonstrated to be highly insensitive to both polarization and incident angles. These results suggest that the proposed metasurface absorber should be suitable for high-temperature solar thermal devices.

High Birefringence D-Shaped Germanium-Doped Photonic Crystal Fiber Sensor

In this work, a surface plasmon resonance (SPR) sensor based on a D-shaped germanium-doped photonic crystal fiber (PCF) is proposed. The finite element method (FEM) is introduced to analyze the structure parameters, such as germanium-doped concentration, lattice pitch, and air hole size. In addition, the coupling properties and birefringence properties of PCF are also studied. The computer simulation results indicate that two different surface plasmon polariton (SPP) coupling modes are produced on the polished surface, covered with metal film, when the analyte refractive index (RI) is 1.34. Then, with the increase of the RI, the incompleteness of one of the coupling modes will be transformed into the complete coupling. The effect of germanium concentration on the birefringence is also analyzed. It has an optimal wavelength sensitivity of 5600 nm/RIU when the RI is 1.37. This sensor exhibits a maximum birefringence of 1.06 × 10-2 and a resolution of 1.78 × 10-5 RIU with high linearity.

Fiber optic sensor for nondestructive detection of microbial growth on a silk surface

To nondestructively detect the mold growth process on silk, a coaxial concave reflection conical fiber optic sensor was developed using conical quartz fibers, fiber connectors, fiber couplers, and a plastic fixator. We established a theoretical model of this sensor and studied the influence of its structural parameters on its sensitivity, characterized the morphology of Aspergillus niger, and detected its growth process on a silk surface. A linear relationship between the sensor's output signal and the mold height was found. The sensor sensitivity, maximum detection error, and low limit of detection were 2.4 E-5 AU/µm, 7.83%, and 10 µm, respectively.

Tunable Narrow-Band Filter Based on Long-Range Surface Plasmon Polariton Waveguide Bragg Grating

A narrow-band Bragg grating filter based on a long-range surface plasmon polariton (LRSPP) waveguide is theoretically demonstrated. The three-dimensional Au stripe that is embedded in polymer SU-8 acts as both the waveguide and the heating electrode. With the eigen mode expansion and finite element method optimizations, the proposed filter shows a reflectivity of 0.578 and a 3 dB bandwidth of 1.1 nm. The central wavelength can be tuned from 1549.9 nm to 1544.3 nm by varying temperature from 25 °C to 75 °C, while maintaining the optical return loss at −2.5 dB. This proposed tunable filter has potential in on-chip light signal processing.

A Review: The Functional Materials-Assisted Terahertz Metamaterial Absorbers and Polarization Converters

When metamaterial structures meet functional materials, what will happen? The recent rise of the combination of metamaterial structures and functional materials opens new opportunities for dynamic manipulation of terahertz wave. The optical responses of functional materials are greatly improved based on the highly-localized structures in metamaterials, and the properties of metamaterials can in turn be manipulated in a wide dynamic range based on the external stimulation. In the topical review, we summarize the recent progress of the functional materials-based metamaterial structures for flexible control of the terahertz absorption and polarization conversion. The reviewed devices include but are not limited to terahertz metamaterial absorbers with different characteristics, polarization converters, wave plates, and so on. We review the dynamical tunable metamaterial structures based on the combination with functional materials such as graphene, vanadium dioxide (VO2) and Dirac semimetal (DSM) under various external stimulation. The faced challenges and future prospects of the related researches will also be discussed in the end.

Refractive Index Sensor Based on a Metal-Insulator-Metal Bus Waveguide Coupled with a U-Shaped Ring Resonator

In this study, a novel refractive index sensor structure was designed consisting of a metal-insulator-metal (MIM) waveguide with two rectangular baffles and a U-Shaped Ring Resonator (USRR). The finite element method was used to theoretically investigate the sensor’s transmission characteristics. The simulation results show that Fano resonance is a sharp asymmetric resonance generated by the interaction between the discrete narrow-band mode and the successive wide-band mode. Next, the formation of broadband and narrowband is further studied, and finally the key factors affecting the performance of the sensor are obtained. The best sensitivity of this refractive-index sensor is 2020 nm/RIU and the figure of merit (FOM) is 53.16. The presented sensor has the potential to be useful in nanophotonic sensing applications.

High-Efficiency Crystalline Silicon-Based Solar Cells Using Textured TiO2 Layer and Plasmonic Nanoparticles

A high-efficiency crystalline silicon-based solar cell in the visible and near-infrared regions is introduced in this paper. A textured TiO₂ layer grown on top of the active silicon layer and a back reflector with gratings are used to enhance the solar cell performance. The given structure is simulated using the finite difference time domain (FDTD) method to determine the solar cell’s performance. The simulation toolbox calculates the short circuit current density by solving Maxwell’s equation, and the open-circuit voltage will be calculated numerically according to the material parameters. Hence, each simulation process calculates the fill factor and power conversion efficiency numerically. The optimization of the crystalline silicon active layer thickness and the dimensions of the back reflector grating are given in this work. The grating period structure of the Al back reflector is covered with a graphene layer to improve the absorption of the solar cell, where the periodicity, height, and width of the gratings are optimized. Furthermore, the optimum height of the textured TiO₂ layer is simulated to produce the maximum efficiency using light absorption and short circuit current density. In addition, plasmonic nanoparticles are distributed on the textured surface to enhance the light absorption, with different radii, with radius 50, 75, 100, and 125 nm. The absorbed light energy for different nanoparticle materials, Au, Ag, Al, and Cu, are simulated and compared to determine the best performance. The obtained short circuit current density is 61.9 ma/cm², open-circuit voltage is 0.6 V, fill factor is 0.83, and the power conversion efficiency is 30.6%. The proposed crystalline silicon solar cell improves the short circuit current density by almost 89% and the power conversion efficiency by almost 34%.

Vanadium Dioxide-Based Terahertz Metamaterial Devices Switchable between Transmission and Absorption

Terahertz metamaterial plays a significant role in the development of imaging, sensing, and communications. The function of conventional terahertz metamaterials was fixed after fabrication. They can only achieve a single function and do not have adjustable characteristics, which greatly limits the scalability and practical application of metamaterial. Here, we propose a vanadium dioxide-based terahertz metamaterial device, which is switchable between being a transmitter and an absorber. The transmission and absorption characteristics and temperature tunable properties of phase change metamaterials in the terahertz band were investigated. As the temperature of vanadium dioxide is varied between 20 °C and 80 °C, the device can switch between transmission and quad-band resonance absorption at the terahertz frequency range, with a high transmission rate of over 80% and a peak absorbance of 98.3%, respectively. In addition, when the device acts as an absorber, the proposed metamaterial device is tunable, and the modulation amplitude can reach 94.3%; while the device is used as a transmissive device, the modulation amplitude of the transmission peak at 81%. The results indicate that the proposed metamaterial device can promote the applications of terahertz devices, such as switching, modulation, and sensing.

Ultra-Thin Terahertz Deflection Device Based on Laser Direct Writing Graphene Oxide Paper

In the world of terahertz bands, terahertz beam deflection has gradually attracted substantial attention, due to its great significance in wireless communications, high-resolution imaging and radar applications. In this paper, a low-reflection and fast-fabricated terahertz beam deflection device has been realized by utilizing graphene oxide paper. Using laser direct writing technology, graphene oxide has been patterned as a specific sample. The thickness of the graphene oxide-based terahertz devices is around 15–20 μm, and the processing takes only a few seconds. The experimental results show that the beam from this device can achieve 5.7° and 10.2° deflection at 340 GHz, while the reflection is 10%, which is only 1/5 of that of existing conventional devices. The proposed device with excellent performance can be quickly manufactured and applied in the fields of terahertz imaging, communication, and perception, enabling the application of terahertz technology.