Three-dimensional ordered macroporous design of heterogeneous cobalt-iron phosphides as oxygen evolution electrocatalyst

Oxygen evolution reaction (OER) plays a key role in electrochemical conversion, which needs efficient and economical electrocatalyst to boost its kinetics for large-scale application. Herein, a bimetallic CoP/FeP2heterostructure with a three-dimensional ordered macroporous structure (3DOM-CoP/FeP2) was synthesized as an OER catalyst to demonstrate a heterogeneous engineering induction strategy. By adjusting the electron distribution and producing a lot of active sites, the heterogeneous interface enhances catalytic performance. High specific surface area is provided by the 3DOM structure. Additionally, at the solid-gas-electrolyte threephase interface, the electrocatalytic reaction exhibits good mass transfer.In situRaman spectroscopy characterization revealed that FeOOH and CoOOH reconstructed from CoP/FeP2were the true OER active sites. Consequently, the 3DOM-CoP/FeP2demonstrates superior OER activity with a low overpotentials of 300/420 mV at 10/100 mA cm-2and meritorious OER durability. It also reveals promising performance as the overall water splitting anode.

Synthesis of TiOxNy oxynitrides with a tunable nitrogen content

TiOxNy is a solid solution of cubic TiN and cubic TiO, with the ability to adjust its physical and chemical properties by modifying the O/N ratio, thus making it suitable for various applications. However, the synthesis of TiOxNy remains a significant challenge for inorganic chemists. In this work, we have successfully synthesized TiOxNy nanoparticles using the layered oxide Cs0.68Ti1.83O4 as the precursor and urea as the nitrogen source. The synthesis process was conducted within a temperature range of 800 to 1200 °C, leading to the transformation of the nitrided products from a two-dimensional layered precursor structure to a three-dimensional structure as the temperature increased. By varying the reaction temperature, the O/N ratio can be controlled. The experimental findings demonstrate that the nitrogen content in TiOxNy nanoparticles increases with rising temperature, ranging from TiO0.8N0.2 at 800 °C to TiO0.25N0.75 at 1200 °C. This work highlights the potential of the solid-state method in tailoring the properties of TiOxNy nanoparticles and presents a novel approach for synthesizing oxynitrides.

Boosting the activity and stability via synergistic catalysis of Co nanoparticles and MoC to construct a bifunctional electrocatalyst for high-performance and long-life rechargeable zinc-air batteries

The high overpotential of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) leading to slow air cathode kinetics is still a major challenge for zinc-air batteries (ZABs), hindering the commercialization of ZABs. With the advantages of cost-effectiveness and feasibility of synthesis at room temperature, zeolite imidazole frameworks (ZIFs) are regarded as advanced precursors. But a majority of ZIF-derived catalysts show only one catalytic activity, which limits their performance in ZABs as well as the cycling stability. In addition, molybdenum carbide (MoC) is recognized as an excellent candidate for renewable energy conversion due to its good chemical resistance and thermal stability. Herein, we report a ZIF-67-derived Co/MoC-NC multiphase doped carbon bifunctional ORR/OER catalyst with multiple active sites for the cathode of ZABs. The synergistic catalysis of Co nanoparticles and MoC nanoparticles in Co/MoC-NC which are embedded in a thin layer of N-doped graphitic carbon and immobilized on N-doped graphitic carbon, respectively, demonstrates superior ORR catalytic performance and durability both under alkaline and acidic conditions (E_1/2 = 0.87 V in 1.0 M KOH and E_1/2 = 0.76 V in 0.5 M H₂SO₄). Simultaneously, Co/MoC-NC also exhibits favorable OER performance (10 mA cm^-2, η = 320 mV) in 1 M KOH. Furthermore, a remarkable peak-power density of 215.36 mW cm^-2 and great cycling stability could be achieved while applying Co/MoC-NC in the cathode of ZABs (over 300 h). This work will provide a viable design concept for designing and synthesizing multifunctional catalysts to construct rechargeable ZABs.

A sulfur defective Mn-doped Ni3S2-xnanosheet for enhanced overall water splitting

Non-precious and stable electrocatalysts towards both oxygen and hydrogen evolution reaction (OER/HER) are essential for effective overall water splitting in alkaline solution. In this study, a sulfur defective and manganese-doped nickel sulfide nanosheet that uniformly grown on nickel foam substrate (Mn-Ni₃S_2-x@NF) is synthesized. In alkaline solution, the Mn-Ni₃S_2-x@NF showed a low overpotential of 76 and 110 mV for OER and HER at 10 mA cm^-2, respectively, together exhibiting excellent stability for both OER and HER reaction. It was confirmed by the experimental results that sulfur defects and Mn-doping synergistically optimized the electronic structure of Mn-Ni₃S_2-xwith increased electrical conductivity and enhanced OER/HER activity. Moreover, amorphous nickel oxyhydroxide (NiOOH) was observed byin situRaman during the OER condition, suggesting NiOOH is the active phase for OER reaction. Furthermore, the electrolyzer assembled by Mn-Ni₃S_2-x@NF merely needs 1.46 V to reach 10 mA cm^-2and shows good stability as well. This study provides a feasible way to prepare high-efficiency bifunctional catalysts for overall water splitting.

Microstructure and Electrical Conductivity of Electrospun Titanium Oxynitride Carbon Composite Nanofibers

Titanium oxynitride carbon composite nanofibers (TiON/C-CNFs) were synthesised with electrospinning and subsequent heat treatment in ammonia gas. In situ four-probe electrical conductivity measurements of individual TiON/C-CNFs were performed. Additionally, the TiON/C-CNFs were thoroughly analysed with various techniques, such as X-ray and electron diffractions, electron microscopies and spectroscopies, thermogravimetric analysis and chemical analysis to determine the crystal structure, morphology, chemical composition, and N/O at. ratio. It was found that nanofibers were composed of 2–5 nm sized titanium oxynitride (TiON) nanoparticles embedded in an amorphous carbon matrix with a small degree of porosity. The average electrical conductivity of a single TiON/C-CNF was 1.2 kS/m and the bulk electrical conductivity of the TiON/C-CNF fabric was 0.053 kS/m. From the available data, the mesh density of the TiON/C-CNF fabric was estimated to have a characteristic length of 1.0 µm and electrical conductivity of a single TiON/C-CNF was estimated to be from 0.45 kS/m to 19 kS/m. The electrical conductivity of the measured TiON/C-CNFs is better than that of amorphous carbon nanofibers and has ohmic behaviour, which indicates that it can effectively serve as a new type of support material for electrocatalysts, batteries, sensors or supercapacitors.